diff options
Diffstat (limited to 'drivers/media/video/au0828/au0828-video.c')
| -rw-r--r-- | drivers/media/video/au0828/au0828-video.c | 1998 |
1 files changed, 0 insertions, 1998 deletions
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c deleted file mode 100644 index ac3dd733ab81..000000000000 --- a/drivers/media/video/au0828/au0828-video.c +++ /dev/null @@ -1,1998 +0,0 @@ -/* - * Auvitek AU0828 USB Bridge (Analog video support) - * - * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org> - * Copyright (C) 2005-2008 Auvitek International, Ltd. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * As published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -/* Developer Notes: - * - * VBI support is not yet working - * The hardware scaler supported is unimplemented - * AC97 audio support is unimplemented (only i2s audio mode) - * - */ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/suspend.h> -#include <media/v4l2-common.h> -#include <media/v4l2-ioctl.h> -#include <media/v4l2-chip-ident.h> -#include <media/tuner.h> -#include "au0828.h" -#include "au0828-reg.h" - -static DEFINE_MUTEX(au0828_sysfs_lock); - -/* ------------------------------------------------------------------ - Videobuf operations - ------------------------------------------------------------------*/ - -static unsigned int isoc_debug; -module_param(isoc_debug, int, 0644); -MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]"); - -#define au0828_isocdbg(fmt, arg...) \ -do {\ - if (isoc_debug) { \ - printk(KERN_INFO "au0828 %s :"fmt, \ - __func__ , ##arg); \ - } \ - } while (0) - -static inline void print_err_status(struct au0828_dev *dev, - int packet, int status) -{ - char *errmsg = "Unknown"; - - switch (status) { - case -ENOENT: - errmsg = "unlinked synchronuously"; - break; - case -ECONNRESET: - errmsg = "unlinked asynchronuously"; - break; - case -ENOSR: - errmsg = "Buffer error (overrun)"; - break; - case -EPIPE: - errmsg = "Stalled (device not responding)"; - break; - case -EOVERFLOW: - errmsg = "Babble (bad cable?)"; - break; - case -EPROTO: - errmsg = "Bit-stuff error (bad cable?)"; - break; - case -EILSEQ: - errmsg = "CRC/Timeout (could be anything)"; - break; - case -ETIME: - errmsg = "Device does not respond"; - break; - } - if (packet < 0) { - au0828_isocdbg("URB status %d [%s].\n", status, errmsg); - } else { - au0828_isocdbg("URB packet %d, status %d [%s].\n", - packet, status, errmsg); - } -} - -static int check_dev(struct au0828_dev *dev) -{ - if (dev->dev_state & DEV_DISCONNECTED) { - printk(KERN_INFO "v4l2 ioctl: device not present\n"); - return -ENODEV; - } - - if (dev->dev_state & DEV_MISCONFIGURED) { - printk(KERN_INFO "v4l2 ioctl: device is misconfigured; " - "close and open it again\n"); - return -EIO; - } - return 0; -} - -/* - * IRQ callback, called by URB callback - */ -static void au0828_irq_callback(struct urb *urb) -{ - struct au0828_dmaqueue *dma_q = urb->context; - struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); - unsigned long flags = 0; - int i; - - switch (urb->status) { - case 0: /* success */ - case -ETIMEDOUT: /* NAK */ - break; - case -ECONNRESET: /* kill */ - case -ENOENT: - case -ESHUTDOWN: - au0828_isocdbg("au0828_irq_callback called: status kill\n"); - return; - default: /* unknown error */ - au0828_isocdbg("urb completition error %d.\n", urb->status); - break; - } - - /* Copy data from URB */ - spin_lock_irqsave(&dev->slock, flags); - dev->isoc_ctl.isoc_copy(dev, urb); - spin_unlock_irqrestore(&dev->slock, flags); - - /* Reset urb buffers */ - for (i = 0; i < urb->number_of_packets; i++) { - urb->iso_frame_desc[i].status = 0; - urb->iso_frame_desc[i].actual_length = 0; - } - urb->status = 0; - - urb->status = usb_submit_urb(urb, GFP_ATOMIC); - if (urb->status) { - au0828_isocdbg("urb resubmit failed (error=%i)\n", - urb->status); - } -} - -/* - * Stop and Deallocate URBs - */ -void au0828_uninit_isoc(struct au0828_dev *dev) -{ - struct urb *urb; - int i; - - au0828_isocdbg("au0828: called au0828_uninit_isoc\n"); - - dev->isoc_ctl.nfields = -1; - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - urb = dev->isoc_ctl.urb[i]; - if (urb) { - if (!irqs_disabled()) - usb_kill_urb(urb); - else - usb_unlink_urb(urb); - - if (dev->isoc_ctl.transfer_buffer[i]) { - usb_free_coherent(dev->usbdev, - urb->transfer_buffer_length, - dev->isoc_ctl.transfer_buffer[i], - urb->transfer_dma); - } - usb_free_urb(urb); - dev->isoc_ctl.urb[i] = NULL; - } - dev->isoc_ctl.transfer_buffer[i] = NULL; - } - - kfree(dev->isoc_ctl.urb); - kfree(dev->isoc_ctl.transfer_buffer); - - dev->isoc_ctl.urb = NULL; - dev->isoc_ctl.transfer_buffer = NULL; - dev->isoc_ctl.num_bufs = 0; -} - -/* - * Allocate URBs and start IRQ - */ -int au0828_init_isoc(struct au0828_dev *dev, int max_packets, - int num_bufs, int max_pkt_size, - int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb)) -{ - struct au0828_dmaqueue *dma_q = &dev->vidq; - int i; - int sb_size, pipe; - struct urb *urb; - int j, k; - int rc; - - au0828_isocdbg("au0828: called au0828_prepare_isoc\n"); - - /* De-allocates all pending stuff */ - au0828_uninit_isoc(dev); - - dev->isoc_ctl.isoc_copy = isoc_copy; - dev->isoc_ctl.num_bufs = num_bufs; - - dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs, GFP_KERNEL); - if (!dev->isoc_ctl.urb) { - au0828_isocdbg("cannot alloc memory for usb buffers\n"); - return -ENOMEM; - } - - dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs, - GFP_KERNEL); - if (!dev->isoc_ctl.transfer_buffer) { - au0828_isocdbg("cannot allocate memory for usb transfer\n"); - kfree(dev->isoc_ctl.urb); - return -ENOMEM; - } - - dev->isoc_ctl.max_pkt_size = max_pkt_size; - dev->isoc_ctl.buf = NULL; - - sb_size = max_packets * dev->isoc_ctl.max_pkt_size; - - /* allocate urbs and transfer buffers */ - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - urb = usb_alloc_urb(max_packets, GFP_KERNEL); - if (!urb) { - au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i); - au0828_uninit_isoc(dev); - return -ENOMEM; - } - dev->isoc_ctl.urb[i] = urb; - - dev->isoc_ctl.transfer_buffer[i] = usb_alloc_coherent(dev->usbdev, - sb_size, GFP_KERNEL, &urb->transfer_dma); - if (!dev->isoc_ctl.transfer_buffer[i]) { - printk("unable to allocate %i bytes for transfer" - " buffer %i%s\n", - sb_size, i, - in_interrupt() ? " while in int" : ""); - au0828_uninit_isoc(dev); - return -ENOMEM; - } - memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size); - - pipe = usb_rcvisocpipe(dev->usbdev, - dev->isoc_in_endpointaddr), - - usb_fill_int_urb(urb, dev->usbdev, pipe, - dev->isoc_ctl.transfer_buffer[i], sb_size, - au0828_irq_callback, dma_q, 1); - - urb->number_of_packets = max_packets; - urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; - - k = 0; - for (j = 0; j < max_packets; j++) { - urb->iso_frame_desc[j].offset = k; - urb->iso_frame_desc[j].length = - dev->isoc_ctl.max_pkt_size; - k += dev->isoc_ctl.max_pkt_size; - } - } - - init_waitqueue_head(&dma_q->wq); - - /* submit urbs and enables IRQ */ - for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { - rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); - if (rc) { - au0828_isocdbg("submit of urb %i failed (error=%i)\n", - i, rc); - au0828_uninit_isoc(dev); - return rc; - } - } - - return 0; -} - -/* - * Announces that a buffer were filled and request the next - */ -static inline void buffer_filled(struct au0828_dev *dev, - struct au0828_dmaqueue *dma_q, - struct au0828_buffer *buf) -{ - /* Advice that buffer was filled */ - au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); - - buf->vb.state = VIDEOBUF_DONE; - buf->vb.field_count++; - do_gettimeofday(&buf->vb.ts); - - dev->isoc_ctl.buf = NULL; - - list_del(&buf->vb.queue); - wake_up(&buf->vb.done); -} - -static inline void vbi_buffer_filled(struct au0828_dev *dev, - struct au0828_dmaqueue *dma_q, - struct au0828_buffer *buf) -{ - /* Advice that buffer was filled */ - au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i); - - buf->vb.state = VIDEOBUF_DONE; - buf->vb.field_count++; - do_gettimeofday(&buf->vb.ts); - - dev->isoc_ctl.vbi_buf = NULL; - - list_del(&buf->vb.queue); - wake_up(&buf->vb.done); -} - -/* - * Identify the buffer header type and properly handles - */ -static void au0828_copy_video(struct au0828_dev *dev, - struct au0828_dmaqueue *dma_q, - struct au0828_buffer *buf, - unsigned char *p, - unsigned char *outp, unsigned long len) -{ - void *fieldstart, *startwrite, *startread; - int linesdone, currlinedone, offset, lencopy, remain; - int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */ - - if (len == 0) - return; - - if (dma_q->pos + len > buf->vb.size) - len = buf->vb.size - dma_q->pos; - - startread = p; - remain = len; - - /* Interlaces frame */ - if (buf->top_field) - fieldstart = outp; - else - fieldstart = outp + bytesperline; - - linesdone = dma_q->pos / bytesperline; - currlinedone = dma_q->pos % bytesperline; - offset = linesdone * bytesperline * 2 + currlinedone; - startwrite = fieldstart + offset; - lencopy = bytesperline - currlinedone; - lencopy = lencopy > remain ? remain : lencopy; - - if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) { - au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n", - ((char *)startwrite + lencopy) - - ((char *)outp + buf->vb.size)); - remain = (char *)outp + buf->vb.size - (char *)startwrite; - lencopy = remain; - } - if (lencopy <= 0) - return; - memcpy(startwrite, startread, lencopy); - - remain -= lencopy; - - while (remain > 0) { - startwrite += lencopy + bytesperline; - startread += lencopy; - if (bytesperline > remain) - lencopy = remain; - else - lencopy = bytesperline; - - if ((char *)startwrite + lencopy > (char *)outp + - buf->vb.size) { - au0828_isocdbg("Overflow %zi bytes past buf end (2)\n", - ((char *)startwrite + lencopy) - - ((char *)outp + buf->vb.size)); - lencopy = remain = (char *)outp + buf->vb.size - - (char *)startwrite; - } - if (lencopy <= 0) - break; - - memcpy(startwrite, startread, lencopy); - - remain -= lencopy; - } - - if (offset > 1440) { - /* We have enough data to check for greenscreen */ - if (outp[0] < 0x60 && outp[1440] < 0x60) - dev->greenscreen_detected = 1; - } - - dma_q->pos += len; -} - -/* - * video-buf generic routine to get the next available buffer - */ -static inline void get_next_buf(struct au0828_dmaqueue *dma_q, - struct au0828_buffer **buf) -{ - struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq); - - if (list_empty(&dma_q->active)) { - au0828_isocdbg("No active queue to serve\n"); - dev->isoc_ctl.buf = NULL; - *buf = NULL; - return; - } - - /* Get the next buffer */ - *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); - dev->isoc_ctl.buf = *buf; - - return; -} - -static void au0828_copy_vbi(struct au0828_dev *dev, - struct au0828_dmaqueue *dma_q, - struct au0828_buffer *buf, - unsigned char *p, - unsigned char *outp, unsigned long len) -{ - unsigned char *startwrite, *startread; - int bytesperline; - int i, j = 0; - - if (dev == NULL) { - au0828_isocdbg("dev is null\n"); - return; - } - - if (dma_q == NULL) { - au0828_isocdbg("dma_q is null\n"); - return; - } - if (buf == NULL) - return; - if (p == NULL) { - au0828_isocdbg("p is null\n"); - return; - } - if (outp == NULL) { - au0828_isocdbg("outp is null\n"); - return; - } - - bytesperline = dev->vbi_width; - - if (dma_q->pos + len > buf->vb.size) - len = buf->vb.size - dma_q->pos; - - startread = p; - startwrite = outp + (dma_q->pos / 2); - - /* Make sure the bottom field populates the second half of the frame */ - if (buf->top_field == 0) - startwrite += bytesperline * dev->vbi_height; - - for (i = 0; i < len; i += 2) - startwrite[j++] = startread[i+1]; - - dma_q->pos += len; -} - - -/* - * video-buf generic routine to get the next available VBI buffer - */ -static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q, - struct au0828_buffer **buf) -{ - struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq); - char *outp; - - if (list_empty(&dma_q->active)) { - au0828_isocdbg("No active queue to serve\n"); - dev->isoc_ctl.vbi_buf = NULL; - *buf = NULL; - return; - } - - /* Get the next buffer */ - *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue); - /* Cleans up buffer - Useful for testing for frame/URB loss */ - outp = videobuf_to_vmalloc(&(*buf)->vb); - memset(outp, 0x00, (*buf)->vb.size); - - dev->isoc_ctl.vbi_buf = *buf; - - return; -} - -/* - * Controls the isoc copy of each urb packet - */ -static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb) -{ - struct au0828_buffer *buf; - struct au0828_buffer *vbi_buf; - struct au0828_dmaqueue *dma_q = urb->context; - struct au0828_dmaqueue *vbi_dma_q = &dev->vbiq; - unsigned char *outp = NULL; - unsigned char *vbioutp = NULL; - int i, len = 0, rc = 1; - unsigned char *p; - unsigned char fbyte; - unsigned int vbi_field_size; - unsigned int remain, lencopy; - - if (!dev) - return 0; - - if ((dev->dev_state & DEV_DISCONNECTED) || - (dev->dev_state & DEV_MISCONFIGURED)) - return 0; - - if (urb->status < 0) { - print_err_status(dev, -1, urb->status); - if (urb->status == -ENOENT) - return 0; - } - - buf = dev->isoc_ctl.buf; - if (buf != NULL) - outp = videobuf_to_vmalloc(&buf->vb); - - vbi_buf = dev->isoc_ctl.vbi_buf; - if (vbi_buf != NULL) - vbioutp = videobuf_to_vmalloc(&vbi_buf->vb); - - for (i = 0; i < urb->number_of_packets; i++) { - int status = urb->iso_frame_desc[i].status; - - if (status < 0) { - print_err_status(dev, i, status); - if (urb->iso_frame_desc[i].status != -EPROTO) - continue; - } - - if (urb->iso_frame_desc[i].actual_length <= 0) - continue; - - if (urb->iso_frame_desc[i].actual_length > - dev->max_pkt_size) { - au0828_isocdbg("packet bigger than packet size"); - continue; - } - - p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; - fbyte = p[0]; - len = urb->iso_frame_desc[i].actual_length - 4; - p += 4; - - if (fbyte & 0x80) { - len -= 4; - p += 4; - au0828_isocdbg("Video frame %s\n", - (fbyte & 0x40) ? "odd" : "even"); - if (fbyte & 0x40) { - /* VBI */ - if (vbi_buf != NULL) - vbi_buffer_filled(dev, - vbi_dma_q, - vbi_buf); - vbi_get_next_buf(vbi_dma_q, &vbi_buf); - if (vbi_buf == NULL) - vbioutp = NULL; - else - vbioutp = videobuf_to_vmalloc( - &vbi_buf->vb); - - /* Video */ - if (buf != NULL) - buffer_filled(dev, dma_q, buf); - get_next_buf(dma_q, &buf); - if (buf == NULL) - outp = NULL; - else - outp = videobuf_to_vmalloc(&buf->vb); - - /* As long as isoc traffic is arriving, keep - resetting the timer */ - if (dev->vid_timeout_running) - mod_timer(&dev->vid_timeout, - jiffies + (HZ / 10)); - if (dev->vbi_timeout_running) - mod_timer(&dev->vbi_timeout, - jiffies + (HZ / 10)); - } - - if (buf != NULL) { - if (fbyte & 0x40) - buf->top_field = 1; - else - buf->top_field = 0; - } - - if (vbi_buf != NULL) { - if (fbyte & 0x40) - vbi_buf->top_field = 1; - else - vbi_buf->top_field = 0; - } - - dev->vbi_read = 0; - vbi_dma_q->pos = 0; - dma_q->pos = 0; - } - - vbi_field_size = dev->vbi_width * dev->vbi_height * 2; - if (dev->vbi_read < vbi_field_size) { - remain = vbi_field_size - dev->vbi_read; - if (len < remain) - lencopy = len; - else - lencopy = remain; - - if (vbi_buf != NULL) - au0828_copy_vbi(dev, vbi_dma_q, vbi_buf, p, - vbioutp, len); - - len -= lencopy; - p += lencopy; - dev->vbi_read += lencopy; - } - - if (dev->vbi_read >= vbi_field_size && buf != NULL) - au0828_copy_video(dev, dma_q, buf, p, outp, len); - } - return rc; -} - -static int -buffer_setup(struct videobuf_queue *vq, unsigned int *count, - unsigned int *size) -{ - struct au0828_fh *fh = vq->priv_data; - *size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3; - - if (0 == *count) - *count = AU0828_DEF_BUF; - - if (*count < AU0828_MIN_BUF) - *count = AU0828_MIN_BUF; - return 0; -} - -/* This is called *without* dev->slock held; please keep it that way */ -static void free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf) -{ - struct au0828_fh *fh = vq->priv_data; - struct au0828_dev *dev = fh->dev; - unsigned long flags = 0; - if (in_interrupt()) - BUG(); - - /* We used to wait for the buffer to finish here, but this didn't work - because, as we were keeping the state as VIDEOBUF_QUEUED, - videobuf_queue_cancel marked it as finished for us. - (Also, it could wedge forever if the hardware was misconfigured.) - - This should be safe; by the time we get here, the buffer isn't - queued anymore. If we ever start marking the buffers as - VIDEOBUF_ACTIVE, it won't be, though. - */ - spin_lock_irqsave(&dev->slock, flags); - if (dev->isoc_ctl.buf == buf) - dev->isoc_ctl.buf = NULL; - spin_unlock_irqrestore(&dev->slock, flags); - - videobuf_vmalloc_free(&buf->vb); - buf->vb.state = VIDEOBUF_NEEDS_INIT; -} - -static int -buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, - enum v4l2_field field) -{ - struct au0828_fh *fh = vq->priv_data; - struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb); - struct au0828_dev *dev = fh->dev; - int rc = 0, urb_init = 0; - - buf->vb.size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3; - - if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) - return -EINVAL; - - buf->vb.width = dev->width; - buf->vb.height = dev->height; - buf->vb.field = field; - - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - rc = videobuf_iolock(vq, &buf->vb, NULL); - if (rc < 0) { - printk(KERN_INFO "videobuf_iolock failed\n"); - goto fail; - } - } - - if (!dev->isoc_ctl.num_bufs) - urb_init = 1; - - if (urb_init) { - rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB, - AU0828_MAX_ISO_BUFS, dev->max_pkt_size, - au0828_isoc_copy); - if (rc < 0) { - printk(KERN_INFO "au0828_init_isoc failed\n"); - goto fail; - } - } - - buf->vb.state = VIDEOBUF_PREPARED; - return 0; - -fail: - free_buffer(vq, buf); - return rc; -} - -static void -buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) -{ - struct au0828_buffer *buf = container_of(vb, - struct au0828_buffer, - vb); - struct au0828_fh *fh = vq->priv_data; - struct au0828_dev *dev = fh->dev; - struct au0828_dmaqueue *vidq = &dev->vidq; - - buf->vb.state = VIDEOBUF_QUEUED; - list_add_tail(&buf->vb.queue, &vidq->active); -} - -static void buffer_release(struct videobuf_queue *vq, - struct videobuf_buffer *vb) -{ - struct au0828_buffer *buf = container_of(vb, - struct au0828_buffer, - vb); - - free_buffer(vq, buf); -} - -static struct videobuf_queue_ops au0828_video_qops = { - .buf_setup = buffer_setup, - .buf_prepare = buffer_prepare, - .buf_queue = buffer_queue, - .buf_release = buffer_release, -}; - -/* ------------------------------------------------------------------ - V4L2 interface - ------------------------------------------------------------------*/ - -static int au0828_i2s_init(struct au0828_dev *dev) -{ - /* Enable i2s mode */ - au0828_writereg(dev, AU0828_AUDIOCTRL_50C, 0x01); - return 0; -} - -/* - * Auvitek au0828 analog stream enable - * Please set interface0 to AS5 before enable the stream - */ -int au0828_analog_stream_enable(struct au0828_dev *d) -{ - dprintk(1, "au0828_analog_stream_enable called\n"); - au0828_writereg(d, AU0828_SENSORCTRL_VBI_103, 0x00); - au0828_writereg(d, 0x106, 0x00); - /* set x position */ - au0828_writereg(d, 0x110, 0x00); - au0828_writereg(d, 0x111, 0x00); - au0828_writereg(d, 0x114, 0xa0); - au0828_writereg(d, 0x115, 0x05); - /* set y position */ - au0828_writereg(d, 0x112, 0x00); - au0828_writereg(d, 0x113, 0x00); - au0828_writereg(d, 0x116, 0xf2); - au0828_writereg(d, 0x117, 0x00); - au0828_writereg(d, AU0828_SENSORCTRL_100, 0xb3); - - return 0; -} - -int au0828_analog_stream_disable(struct au0828_dev *d) -{ - dprintk(1, "au0828_analog_stream_disable called\n"); - au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0); - return 0; -} - -void au0828_analog_stream_reset(struct au0828_dev *dev) -{ - dprintk(1, "au0828_analog_stream_reset called\n"); - au0828_writereg(dev, AU0828_SENSORCTRL_100, 0x0); - mdelay(30); - au0828_writereg(dev, AU0828_SENSORCTRL_100, 0xb3); -} - -/* - * Some operations needs to stop current streaming - */ -static int au0828_stream_interrupt(struct au0828_dev *dev) -{ - int ret = 0; - - dev->stream_state = STREAM_INTERRUPT; - if (dev->dev_state == DEV_DISCONNECTED) - return -ENODEV; - else if (ret) { - dev->dev_state = DEV_MISCONFIGURED; - dprintk(1, "%s device is misconfigured!\n", __func__); - return ret; - } - return 0; -} - -/* - * au0828_release_resources - * unregister v4l2 devices - */ -void au0828_analog_unregister(struct au0828_dev *dev) -{ - dprintk(1, "au0828_release_resources called\n"); - mutex_lock(&au0828_sysfs_lock); - - if (dev->vdev) - video_unregister_device(dev->vdev); - if (dev->vbi_dev) - video_unregister_device(dev->vbi_dev); - - mutex_unlock(&au0828_sysfs_lock); -} - - -/* Usage lock check functions */ -static int res_get(struct au0828_fh *fh, unsigned int bit) -{ - struct au0828_dev *dev = fh->dev; - - if (fh->resources & bit) - /* have it already allocated */ - return 1; - - /* is it free? */ - mutex_lock(&dev->lock); - if (dev->resources & bit) { - /* no, someone else uses it */ - mutex_unlock(&dev->lock); - return 0; - } - /* it's free, grab it */ - fh->resources |= bit; - dev->resources |= bit; - dprintk(1, "res: get %d\n", bit); - mutex_unlock(&dev->lock); - return 1; -} - -static int res_check(struct au0828_fh *fh, unsigned int bit) -{ - return fh->resources & bit; -} - -static int res_locked(struct au0828_dev *dev, unsigned int bit) -{ - return dev->resources & bit; -} - -static void res_free(struct au0828_fh *fh, unsigned int bits) -{ - struct au0828_dev *dev = fh->dev; - - BUG_ON((fh->resources & bits) != bits); - - mutex_lock(&dev->lock); - fh->resources &= ~bits; - dev->resources &= ~bits; - dprintk(1, "res: put %d\n", bits); - mutex_unlock(&dev->lock); -} - -static int get_ressource(struct au0828_fh *fh) -{ - switch (fh->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - return AU0828_RESOURCE_VIDEO; - case V4L2_BUF_TYPE_VBI_CAPTURE: - return AU0828_RESOURCE_VBI; - default: - BUG(); - return 0; - } -} - -/* This function ensures that video frames continue to be delivered even if - the ITU-656 input isn't receiving any data (thereby preventing applications - such as tvtime from hanging) */ -void au0828_vid_buffer_timeout(unsigned long data) -{ - struct au0828_dev *dev = (struct au0828_dev *) data; - struct au0828_dmaqueue *dma_q = &dev->vidq; - struct au0828_buffer *buf; - unsigned char *vid_data; - unsigned long flags = 0; - - spin_lock_irqsave(&dev->slock, flags); - - buf = dev->isoc_ctl.buf; - if (buf != NULL) { - vid_data = videobuf_to_vmalloc(&buf->vb); - memset(vid_data, 0x00, buf->vb.size); /* Blank green frame */ - buffer_filled(dev, dma_q, buf); - } - get_next_buf(dma_q, &buf); - - if (dev->vid_timeout_running == 1) - mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); - - spin_unlock_irqrestore(&dev->slock, flags); -} - -void au0828_vbi_buffer_timeout(unsigned long data) -{ - struct au0828_dev *dev = (struct au0828_dev *) data; - struct au0828_dmaqueue *dma_q = &dev->vbiq; - struct au0828_buffer *buf; - unsigned char *vbi_data; - unsigned long flags = 0; - - spin_lock_irqsave(&dev->slock, flags); - - buf = dev->isoc_ctl.vbi_buf; - if (buf != NULL) { - vbi_data = videobuf_to_vmalloc(&buf->vb); - memset(vbi_data, 0x00, buf->vb.size); - vbi_buffer_filled(dev, dma_q, buf); - } - vbi_get_next_buf(dma_q, &buf); - - if (dev->vbi_timeout_running == 1) - mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); - spin_unlock_irqrestore(&dev->slock, flags); -} - - -static int au0828_v4l2_open(struct file *filp) -{ - int ret = 0; - struct video_device *vdev = video_devdata(filp); - struct au0828_dev *dev = video_drvdata(filp); - struct au0828_fh *fh; - int type; - - switch (vdev->vfl_type) { - case VFL_TYPE_GRABBER: - type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - break; - case VFL_TYPE_VBI: - type = V4L2_BUF_TYPE_VBI_CAPTURE; - break; - default: - return -EINVAL; - } - - fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL); - if (NULL == fh) { - dprintk(1, "Failed allocate au0828_fh struct!\n"); - return -ENOMEM; - } - - fh->type = type; - fh->dev = dev; - filp->private_data = fh; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { - /* set au0828 interface0 to AS5 here again */ - ret = usb_set_interface(dev->usbdev, 0, 5); - if (ret < 0) { - printk(KERN_INFO "Au0828 can't set alternate to 5!\n"); - return -EBUSY; - } - dev->width = NTSC_STD_W; - dev->height = NTSC_STD_H; - dev->frame_size = dev->width * dev->height * 2; - dev->field_size = dev->width * dev->height; - dev->bytesperline = dev->width * 2; - - au0828_analog_stream_enable(dev); - au0828_analog_stream_reset(dev); - - /* If we were doing ac97 instead of i2s, it would go here...*/ - au0828_i2s_init(dev); - - dev->stream_state = STREAM_OFF; - dev->dev_state |= DEV_INITIALIZED; - } - - dev->users++; - - videobuf_queue_vmalloc_init(&fh->vb_vidq, &au0828_video_qops, - NULL, &dev->slock, - V4L2_BUF_TYPE_VIDEO_CAPTURE, - V4L2_FIELD_INTERLACED, - sizeof(struct au0828_buffer), fh, NULL); - - /* VBI Setup */ - dev->vbi_width = 720; - dev->vbi_height = 1; - videobuf_queue_vmalloc_init(&fh->vb_vbiq, &au0828_vbi_qops, - NULL, &dev->slock, - V4L2_BUF_TYPE_VBI_CAPTURE, - V4L2_FIELD_SEQ_TB, - sizeof(struct au0828_buffer), fh, NULL); - - return ret; -} - -static int au0828_v4l2_close(struct file *filp) -{ - int ret; - struct au0828_fh *fh = filp->private_data; - struct au0828_dev *dev = fh->dev; - - if (res_check(fh, AU0828_RESOURCE_VIDEO)) { - /* Cancel timeout thread in case they didn't call streamoff */ - dev->vid_timeout_running = 0; - del_timer_sync(&dev->vid_timeout); - - videobuf_stop(&fh->vb_vidq); - res_free(fh, AU0828_RESOURCE_VIDEO); - } - - if (res_check(fh, AU0828_RESOURCE_VBI)) { - /* Cancel timeout thread in case they didn't call streamoff */ - dev->vbi_timeout_running = 0; - del_timer_sync(&dev->vbi_timeout); - - videobuf_stop(&fh->vb_vbiq); - res_free(fh, AU0828_RESOURCE_VBI); - } - - if (dev->users == 1) { - if (dev->dev_state & DEV_DISCONNECTED) { - au0828_analog_unregister(dev); - kfree(dev); - return 0; - } - - au0828_analog_stream_disable(dev); - - au0828_uninit_isoc(dev); - - /* Save some power by putting tuner to sleep */ - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); - - /* When close the device, set the usb intf0 into alt0 to free - USB bandwidth */ - ret = usb_set_interface(dev->usbdev, 0, 0); - if (ret < 0) - printk(KERN_INFO "Au0828 can't set alternate to 0!\n"); - } - - videobuf_mmap_free(&fh->vb_vidq); - videobuf_mmap_free(&fh->vb_vbiq); - kfree(fh); - dev->users--; - wake_up_interruptible_nr(&dev->open, 1); - return 0; -} - -static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf, - size_t count, loff_t *pos) -{ - struct au0828_fh *fh = filp->private_data; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - if (res_locked(dev, AU0828_RESOURCE_VIDEO)) - return -EBUSY; - - return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0, - filp->f_flags & O_NONBLOCK); - } - - if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - if (!res_get(fh, AU0828_RESOURCE_VBI)) - return -EBUSY; - - if (dev->vbi_timeout_running == 0) { - /* Handle case where caller tries to read without - calling streamon first */ - dev->vbi_timeout_running = 1; - mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); - } - - return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0, - filp->f_flags & O_NONBLOCK); - } - - return 0; -} - -static unsigned int au0828_v4l2_poll(struct file *filp, poll_table *wait) -{ - struct au0828_fh *fh = filp->private_data; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - if (!res_get(fh, AU0828_RESOURCE_VIDEO)) - return POLLERR; - return videobuf_poll_stream(filp, &fh->vb_vidq, wait); - } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - if (!res_get(fh, AU0828_RESOURCE_VBI)) - return POLLERR; - return videobuf_poll_stream(filp, &fh->vb_vbiq, wait); - } else { - return POLLERR; - } -} - -static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma) -{ - struct au0828_fh *fh = filp->private_data; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_mmap_mapper(&fh->vb_vidq, vma); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_mmap_mapper(&fh->vb_vbiq, vma); - - return rc; -} - -static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd, - struct v4l2_format *format) -{ - int ret; - int width = format->fmt.pix.width; - int height = format->fmt.pix.height; - - if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - /* If they are demanding a format other than the one we support, - bail out (tvtime asks for UYVY and then retries with YUYV) */ - if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY) - return -EINVAL; - - /* format->fmt.pix.width only support 720 and height 480 */ - if (width != 720) - width = 720; - if (height != 480) - height = 480; - - format->fmt.pix.width = width; - format->fmt.pix.height = height; - format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; - format->fmt.pix.bytesperline = width * 2; - format->fmt.pix.sizeimage = width * height * 2; - format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - format->fmt.pix.field = V4L2_FIELD_INTERLACED; - - if (cmd == VIDIOC_TRY_FMT) - return 0; - - /* maybe set new image format, driver current only support 720*480 */ - dev->width = width; - dev->height = height; - dev->frame_size = width * height * 2; - dev->field_size = width * height; - dev->bytesperline = width * 2; - - if (dev->stream_state == STREAM_ON) { - dprintk(1, "VIDIOC_SET_FMT: interrupting stream!\n"); - ret = au0828_stream_interrupt(dev); - if (ret != 0) { - dprintk(1, "error interrupting video stream!\n"); - return ret; - } - } - - /* set au0828 interface0 to AS5 here again */ - ret = usb_set_interface(dev->usbdev, 0, 5); - if (ret < 0) { - printk(KERN_INFO "Au0828 can't set alt setting to 5!\n"); - return -EBUSY; - } - - au0828_analog_stream_enable(dev); - - return 0; -} - - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - v4l2_device_call_all(&dev->v4l2_dev, 0, core, queryctrl, qc); - if (qc->type) - return 0; - else - return -EINVAL; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - strlcpy(cap->driver, "au0828", sizeof(cap->driver)); - strlcpy(cap->card, dev->board.name, sizeof(cap->card)); - strlcpy(cap->bus_info, dev->v4l2_dev.name, sizeof(cap->bus_info)); - - /*set the device capabilities */ - cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_VBI_CAPTURE | - V4L2_CAP_AUDIO | - V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING | - V4L2_CAP_TUNER; - return 0; -} - -static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - if (f->index) - return -EINVAL; - - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - strcpy(f->description, "Packed YUV2"); - - f->flags = 0; - f->pixelformat = V4L2_PIX_FMT_UYVY; - - return 0; -} - -static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - f->fmt.pix.width = dev->width; - f->fmt.pix.height = dev->height; - f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY; - f->fmt.pix.bytesperline = dev->bytesperline; - f->fmt.pix.sizeimage = dev->frame_size; - f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* NTSC/PAL */ - f->fmt.pix.field = V4L2_FIELD_INTERLACED; - return 0; -} - -static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - return au0828_set_format(dev, VIDIOC_TRY_FMT, f); -} - -static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, - struct v4l2_format *f) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - mutex_lock(&dev->lock); - - if (videobuf_queue_is_busy(&fh->vb_vidq)) { - printk(KERN_INFO "%s queue busy\n", __func__); - rc = -EBUSY; - goto out; - } - - rc = au0828_set_format(dev, VIDIOC_S_FMT, f); -out: - mutex_unlock(&dev->lock); - return rc; -} - -static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - /* FIXME: when we support something other than NTSC, we are going to - have to make the au0828 bridge adjust the size of its capture - buffer, which is currently hardcoded at 720x480 */ - - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, *norm); - return 0; -} - -static int vidioc_enum_input(struct file *file, void *priv, - struct v4l2_input *input) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - unsigned int tmp; - - static const char *inames[] = { - [AU0828_VMUX_UNDEFINED] = "Undefined", - [AU0828_VMUX_COMPOSITE] = "Composite", - [AU0828_VMUX_SVIDEO] = "S-Video", - [AU0828_VMUX_CABLE] = "Cable TV", - [AU0828_VMUX_TELEVISION] = "Television", - [AU0828_VMUX_DVB] = "DVB", - [AU0828_VMUX_DEBUG] = "tv debug" - }; - - tmp = input->index; - - if (tmp >= AU0828_MAX_INPUT) - return -EINVAL; - if (AUVI_INPUT(tmp).type == 0) - return -EINVAL; - - input->index = tmp; - strcpy(input->name, inames[AUVI_INPUT(tmp).type]); - if ((AUVI_INPUT(tmp).type == AU0828_VMUX_TELEVISION) || - (AUVI_INPUT(tmp).type == AU0828_VMUX_CABLE)) - input->type |= V4L2_INPUT_TYPE_TUNER; - else - input->type |= V4L2_INPUT_TYPE_CAMERA; - - input->std = dev->vdev->tvnorms; - - return 0; -} - -static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - *i = dev->ctrl_input; - return 0; -} - -static int vidioc_s_input(struct file *file, void *priv, unsigned int index) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int i; - - dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __func__, - index); - if (index >= AU0828_MAX_INPUT) - return -EINVAL; - if (AUVI_INPUT(index).type == 0) - return -EINVAL; - dev->ctrl_input = index; - - switch (AUVI_INPUT(index).type) { - case AU0828_VMUX_SVIDEO: - dev->input_type = AU0828_VMUX_SVIDEO; - break; - case AU0828_VMUX_COMPOSITE: - dev->input_type = AU0828_VMUX_COMPOSITE; - break; - case AU0828_VMUX_TELEVISION: - dev->input_type = AU0828_VMUX_TELEVISION; - break; - default: - dprintk(1, "VIDIOC_S_INPUT unknown input type set [%d]\n", - AUVI_INPUT(index).type); - break; - } - - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing, - AUVI_INPUT(index).vmux, 0, 0); - - for (i = 0; i < AU0828_MAX_INPUT; i++) { - int enable = 0; - if (AUVI_INPUT(i).audio_setup == NULL) - continue; - - if (i == index) - enable = 1; - else - enable = 0; - if (enable) { - (AUVI_INPUT(i).audio_setup)(dev, enable); - } else { - /* Make sure we leave it turned on if some - other input is routed to this callback */ - if ((AUVI_INPUT(i).audio_setup) != - ((AUVI_INPUT(index).audio_setup))) { - (AUVI_INPUT(i).audio_setup)(dev, enable); - } - } - } - - v4l2_device_call_all(&dev->v4l2_dev, 0, audio, s_routing, - AUVI_INPUT(index).amux, 0, 0); - return 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - unsigned int index = a->index; - - if (a->index > 1) - return -EINVAL; - - index = dev->ctrl_ainput; - if (index == 0) - strcpy(a->name, "Television"); - else - strcpy(a->name, "Line in"); - - a->capability = V4L2_AUDCAP_STEREO; - a->index = index; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - if (a->index != dev->ctrl_ainput) - return -EINVAL; - return 0; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_ctrl, ctrl); - return 0; - -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_ctrl, ctrl); - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - if (t->index != 0) - return -EINVAL; - - strcpy(t->name, "Auvitek tuner"); - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *t) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - if (t->index != 0) - return -EINVAL; - - t->type = V4L2_TUNER_ANALOG_TV; - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); - dprintk(1, "VIDIOC_S_TUNER: signal = %x, afc = %x\n", t->signal, - t->afc); - return 0; - -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *freq) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - freq->type = V4L2_TUNER_ANALOG_TV; - freq->frequency = dev->ctrl_freq; - return 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *freq) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - if (freq->tuner != 0) - return -EINVAL; - if (freq->type != V4L2_TUNER_ANALOG_TV) - return -EINVAL; - - dev->ctrl_freq = freq->frequency; - - v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, freq); - - au0828_analog_stream_reset(dev); - - return 0; -} - - -/* RAW VBI ioctls */ - -static int vidioc_g_fmt_vbi_cap(struct file *file, void *priv, - struct v4l2_format *format) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - format->fmt.vbi.samples_per_line = dev->vbi_width; - format->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; - format->fmt.vbi.offset = 0; - format->fmt.vbi.flags = 0; - format->fmt.vbi.sampling_rate = 6750000 * 4 / 2; - - format->fmt.vbi.count[0] = dev->vbi_height; - format->fmt.vbi.count[1] = dev->vbi_height; - format->fmt.vbi.start[0] = 21; - format->fmt.vbi.start[1] = 284; - - return 0; -} - -static int vidioc_g_chip_ident(struct file *file, void *priv, - struct v4l2_dbg_chip_ident *chip) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - chip->ident = V4L2_IDENT_NONE; - chip->revision = 0; - - if (v4l2_chip_match_host(&chip->match)) { - chip->ident = V4L2_IDENT_AU0828; - return 0; - } - - v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_chip_ident, chip); - if (chip->ident == V4L2_IDENT_NONE) - return -EINVAL; - - return 0; -} - -static int vidioc_cropcap(struct file *file, void *priv, - struct v4l2_cropcap *cc) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - - cc->bounds.left = 0; - cc->bounds.top = 0; - cc->bounds.width = dev->width; - cc->bounds.height = dev->height; - - cc->defrect = cc->bounds; - - cc->pixelaspect.numerator = 54; - cc->pixelaspect.denominator = 59; - - return 0; -} - -static int vidioc_streamon(struct file *file, void *priv, - enum v4l2_buf_type type) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc = -EINVAL; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (unlikely(type != fh->type)) - return -EINVAL; - - dprintk(1, "vidioc_streamon fh=%p t=%d fh->res=%d dev->res=%d\n", - fh, type, fh->resources, dev->resources); - - if (unlikely(!res_get(fh, get_ressource(fh)))) - return -EBUSY; - - if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - au0828_analog_stream_enable(dev); - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1); - } - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - rc = videobuf_streamon(&fh->vb_vidq); - dev->vid_timeout_running = 1; - mod_timer(&dev->vid_timeout, jiffies + (HZ / 10)); - } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - rc = videobuf_streamon(&fh->vb_vbiq); - dev->vbi_timeout_running = 1; - mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10)); - } - - return rc; -} - -static int vidioc_streamoff(struct file *file, void *priv, - enum v4l2_buf_type type) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - int i; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - fh->type != V4L2_BUF_TYPE_VBI_CAPTURE) - return -EINVAL; - if (type != fh->type) - return -EINVAL; - - dprintk(1, "vidioc_streamoff fh=%p t=%d fh->res=%d dev->res=%d\n", - fh, type, fh->resources, dev->resources); - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { - dev->vid_timeout_running = 0; - del_timer_sync(&dev->vid_timeout); - - v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0); - rc = au0828_stream_interrupt(dev); - if (rc != 0) - return rc; - - for (i = 0; i < AU0828_MAX_INPUT; i++) { - if (AUVI_INPUT(i).audio_setup == NULL) - continue; - (AUVI_INPUT(i).audio_setup)(dev, 0); - } - - videobuf_streamoff(&fh->vb_vidq); - res_free(fh, AU0828_RESOURCE_VIDEO); - } else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) { - dev->vbi_timeout_running = 0; - del_timer_sync(&dev->vbi_timeout); - - videobuf_streamoff(&fh->vb_vbiq); - res_free(fh, AU0828_RESOURCE_VBI); - } - - return 0; -} - -#ifdef CONFIG_VIDEO_ADV_DEBUG -static int vidioc_g_register(struct file *file, void *priv, - struct v4l2_dbg_register *reg) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - switch (reg->match.type) { - case V4L2_CHIP_MATCH_I2C_DRIVER: - v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_register, reg); - return 0; - default: - return -EINVAL; - } -} - -static int vidioc_s_register(struct file *file, void *priv, - struct v4l2_dbg_register *reg) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - - switch (reg->match.type) { - case V4L2_CHIP_MATCH_I2C_DRIVER: - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_register, reg); - return 0; - default: - return -EINVAL; - } - return 0; -} -#endif - -static int vidioc_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *rb) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_reqbufs(&fh->vb_vidq, rb); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_reqbufs(&fh->vb_vbiq, rb); - - return rc; -} - -static int vidioc_querybuf(struct file *file, void *priv, - struct v4l2_buffer *b) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_querybuf(&fh->vb_vidq, b); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_querybuf(&fh->vb_vbiq, b); - - return rc; -} - -static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_qbuf(&fh->vb_vidq, b); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_qbuf(&fh->vb_vbiq, b); - - return rc; -} - -static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) -{ - struct au0828_fh *fh = priv; - struct au0828_dev *dev = fh->dev; - int rc; - - rc = check_dev(dev); - if (rc < 0) - return rc; - - /* Workaround for a bug in the au0828 hardware design that sometimes - results in the colorspace being inverted */ - if (dev->greenscreen_detected == 1) { - dprintk(1, "Detected green frame. Resetting stream...\n"); - au0828_analog_stream_reset(dev); - dev->greenscreen_detected = 0; - } - - if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) - rc = videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK); - else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) - rc = videobuf_dqbuf(&fh->vb_vbiq, b, file->f_flags & O_NONBLOCK); - - return rc; -} - -static struct v4l2_file_operations au0828_v4l_fops = { - .owner = THIS_MODULE, - .open = au0828_v4l2_open, - .release = au0828_v4l2_close, - .read = au0828_v4l2_read, - .poll = au0828_v4l2_poll, - .mmap = au0828_v4l2_mmap, - .ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops video_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, - .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, - .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, - .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, - .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, - .vidioc_s_fmt_vbi_cap = vidioc_g_fmt_vbi_cap, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_cropcap = vidioc_cropcap, - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, - .vidioc_s_std = vidioc_s_std, - .vidioc_enum_input = vidioc_enum_input, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, -#ifdef CONFIG_VIDEO_ADV_DEBUG - .vidioc_g_register = vidioc_g_register, - .vidioc_s_register = vidioc_s_register, -#endif - .vidioc_g_chip_ident = vidioc_g_chip_ident, -}; - -static const struct video_device au0828_video_template = { - .fops = &au0828_v4l_fops, - .release = video_device_release, - .ioctl_ops = &video_ioctl_ops, - .tvnorms = V4L2_STD_NTSC_M, - .current_norm = V4L2_STD_NTSC_M, -}; - -/**************************************************************************/ - -int au0828_analog_register(struct au0828_dev *dev, - struct usb_interface *interface) -{ - int retval = -ENOMEM; - struct usb_host_interface *iface_desc; - struct usb_endpoint_descriptor *endpoint; - int i, ret; - - dprintk(1, "au0828_analog_register called!\n"); - - /* set au0828 usb interface0 to as5 */ - retval = usb_set_interface(dev->usbdev, - interface->cur_altsetting->desc.bInterfaceNumber, 5); - if (retval != 0) { - printk(KERN_INFO "Failure setting usb interface0 to as5\n"); - return retval; - } - - /* Figure out which endpoint has the isoc interface */ - iface_desc = interface->cur_altsetting; - for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { - endpoint = &iface_desc->endpoint[i].desc; - if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) - == USB_DIR_IN) && - ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) - == USB_ENDPOINT_XFER_ISOC)) { - - /* we find our isoc in endpoint */ - u16 tmp = le16_to_cpu(endpoint->wMaxPacketSize); - dev->max_pkt_size = (tmp & 0x07ff) * - (((tmp & 0x1800) >> 11) + 1); - dev->isoc_in_endpointaddr = endpoint->bEndpointAddress; - } - } - if (!(dev->isoc_in_endpointaddr)) { - printk(KERN_INFO "Could not locate isoc endpoint\n"); - kfree(dev); - return -ENODEV; - } - - init_waitqueue_head(&dev->open); - spin_lock_init(&dev->slock); - mutex_init(&dev->lock); - - /* init video dma queues */ - INIT_LIST_HEAD(&dev->vidq.active); - INIT_LIST_HEAD(&dev->vidq.queued); - INIT_LIST_HEAD(&dev->vbiq.active); - INIT_LIST_HEAD(&dev->vbiq.queued); - - dev->vid_timeout.function = au0828_vid_buffer_timeout; - dev->vid_timeout.data = (unsigned long) dev; - init_timer(&dev->vid_timeout); - - dev->vbi_timeout.function = au0828_vbi_buffer_timeout; - dev->vbi_timeout.data = (unsigned long) dev; - init_timer(&dev->vbi_timeout); - - dev->width = NTSC_STD_W; - dev->height = NTSC_STD_H; - dev->field_size = dev->width * dev->height; - dev->frame_size = dev->field_size << 1; - dev->bytesperline = dev->width << 1; - dev->ctrl_ainput = 0; - - /* allocate and fill v4l2 video struct */ - dev->vdev = video_device_alloc(); - if (NULL == dev->vdev) { - dprintk(1, "Can't allocate video_device.\n"); - return -ENOMEM; - } - - /* allocate the VBI struct */ - dev->vbi_dev = video_device_alloc(); - if (NULL == dev->vbi_dev) { - dprintk(1, "Can't allocate vbi_device.\n"); - ret = -ENOMEM; - goto err_vdev; - } - - /* Fill the video capture device struct */ - *dev->vdev = au0828_video_template; - dev->vdev->parent = &dev->usbdev->dev; - strcpy(dev->vdev->name, "au0828a video"); - - /* Setup the VBI device */ - *dev->vbi_dev = au0828_video_template; - dev->vbi_dev->parent = &dev->usbdev->dev; - strcpy(dev->vbi_dev->name, "au0828a vbi"); - - /* Register the v4l2 device */ - video_set_drvdata(dev->vdev, dev); - retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1); - if (retval != 0) { - dprintk(1, "unable to register video device (error = %d).\n", - retval); - ret = -ENODEV; - goto err_vbi_dev; - } - - /* Register the vbi device */ - video_set_drvdata(dev->vbi_dev, dev); - retval = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, -1); - if (retval != 0) { - dprintk(1, "unable to register vbi device (error = %d).\n", - retval); - ret = -ENODEV; - goto err_vbi_dev; - } - - dprintk(1, "%s completed!\n", __func__); - - return 0; - -err_vbi_dev: - video_device_release(dev->vbi_dev); -err_vdev: - video_device_release(dev->vdev); - return ret; -} - |
