diff options
Diffstat (limited to 'drivers/gpu')
| -rw-r--r-- | drivers/gpu/drm/drm_atomic.c | 21 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_atomic_helper.c | 181 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_crtc.c | 76 | ||||
| -rw-r--r-- | drivers/gpu/drm/drm_plane_helper.c | 14 |
4 files changed, 273 insertions, 19 deletions
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 4c5c9c3899e0..c2e9c5283136 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -134,6 +134,7 @@ void drm_atomic_state_clear(struct drm_atomic_state *state) connector->funcs->atomic_destroy_state(connector, state->connector_states[i]); + state->connector_states[i] = NULL; } for (i = 0; i < config->num_crtc; i++) { @@ -144,6 +145,7 @@ void drm_atomic_state_clear(struct drm_atomic_state *state) crtc->funcs->atomic_destroy_state(crtc, state->crtc_states[i]); + state->crtc_states[i] = NULL; } for (i = 0; i < config->num_total_plane; i++) { @@ -154,6 +156,7 @@ void drm_atomic_state_clear(struct drm_atomic_state *state) plane->funcs->atomic_destroy_state(plane, state->plane_states[i]); + state->plane_states[i] = NULL; } } EXPORT_SYMBOL(drm_atomic_state_clear); @@ -241,7 +244,13 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc, struct drm_crtc_state *state, struct drm_property *property, uint64_t val) { - if (crtc->funcs->atomic_set_property) + struct drm_device *dev = crtc->dev; + struct drm_mode_config *config = &dev->mode_config; + + /* FIXME: Mode prop is missing, which also controls ->enable. */ + if (property == config->prop_active) { + state->active = val; + } else if (crtc->funcs->atomic_set_property) return crtc->funcs->atomic_set_property(crtc, state, property, val); return -EINVAL; } @@ -282,6 +291,13 @@ static int drm_atomic_crtc_check(struct drm_crtc *crtc, * * TODO: Add generic modeset state checks once we support those. */ + + if (state->active && !state->enable) { + DRM_DEBUG_KMS("[CRTC:%d] active without enabled\n", + crtc->base.id); + return -EINVAL; + } + return 0; } @@ -978,7 +994,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state) if (!crtc) continue; - if (crtc_state->mode_changed) { + if (crtc_state->mode_changed || + crtc_state->active_changed) { DRM_DEBUG_KMS("[CRTC:%d] requires full modeset\n", crtc->base.id); return -EINVAL; diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 24c44c24dabe..7e3a52b97c7d 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -339,6 +339,12 @@ mode_fixup(struct drm_atomic_state *state) return 0; } +static bool +needs_modeset(struct drm_crtc_state *state) +{ + return state->mode_changed || state->active_changed; +} + /** * drm_atomic_helper_check - validate state object for modeset changes * @dev: DRM device @@ -413,12 +419,27 @@ drm_atomic_helper_check_modeset(struct drm_device *dev, crtc = state->crtcs[i]; crtc_state = state->crtc_states[i]; - if (!crtc || !crtc_state->mode_changed) + if (!crtc) + continue; + + /* + * We must set ->active_changed after walking connectors for + * otherwise an update that only changes active would result in + * a full modeset because update_connector_routing force that. + */ + if (crtc->state->active != crtc_state->active) { + DRM_DEBUG_KMS("[CRTC:%d] active changed\n", + crtc->base.id); + crtc_state->active_changed = true; + } + + if (!needs_modeset(crtc_state)) continue; - DRM_DEBUG_KMS("[CRTC:%d] needs full modeset, enable: %c\n", + DRM_DEBUG_KMS("[CRTC:%d] needs all connectors, enable: %c, active: %c\n", crtc->base.id, - crtc_state->enable ? 'y' : 'n'); + crtc_state->enable ? 'y' : 'n', + crtc_state->active ? 'y' : 'n'); ret = drm_atomic_add_affected_connectors(state, crtc); if (ret != 0) @@ -554,6 +575,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) struct drm_connector *connector; struct drm_encoder_helper_funcs *funcs; struct drm_encoder *encoder; + struct drm_crtc_state *old_crtc_state; old_conn_state = old_state->connector_states[i]; connector = old_state->connectors[i]; @@ -563,6 +585,11 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) if (!old_conn_state || !old_conn_state->crtc) continue; + old_crtc_state = old_state->crtc_states[drm_crtc_index(old_conn_state->crtc)]; + + if (!old_crtc_state->active) + continue; + encoder = old_conn_state->best_encoder; /* We shouldn't get this far if we didn't previously have @@ -573,6 +600,9 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) funcs = encoder->helper_private; + DRM_DEBUG_KMS("disabling [ENCODER:%d:%s]\n", + encoder->base.id, encoder->name); + /* * Each encoder has at most one connector (since we always steal * it away), so we won't call call disable hooks twice. @@ -581,7 +611,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) encoder->bridge->funcs->disable(encoder->bridge); /* Right function depends upon target state. */ - if (connector->state->crtc) + if (connector->state->crtc && funcs->prepare) funcs->prepare(encoder); else if (funcs->disable) funcs->disable(encoder); @@ -595,17 +625,26 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state) for (i = 0; i < ncrtcs; i++) { struct drm_crtc_helper_funcs *funcs; struct drm_crtc *crtc; + struct drm_crtc_state *old_crtc_state; crtc = old_state->crtcs[i]; + old_crtc_state = old_state->crtc_states[i]; /* Shut down everything that needs a full modeset. */ - if (!crtc || !crtc->state->mode_changed) + if (!crtc || !needs_modeset(crtc->state)) + continue; + + if (!old_crtc_state->active) continue; funcs = crtc->helper_private; + DRM_DEBUG_KMS("disabling [CRTC:%d]\n", + crtc->base.id); + + /* Right function depends upon target state. */ - if (crtc->state->enable) + if (crtc->state->enable && funcs->prepare) funcs->prepare(crtc); else if (funcs->disable) funcs->disable(crtc); @@ -684,8 +723,12 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state) funcs = crtc->helper_private; - if (crtc->state->enable) + if (crtc->state->enable) { + DRM_DEBUG_KMS("modeset on [CRTC:%d]\n", + crtc->base.id); + funcs->mode_set_nofb(crtc); + } } for (i = 0; i < old_state->num_connector; i++) { @@ -706,6 +749,12 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *old_state) mode = &new_crtc_state->mode; adjusted_mode = &new_crtc_state->adjusted_mode; + if (!new_crtc_state->mode_changed) + continue; + + DRM_DEBUG_KMS("modeset on [ENCODER:%d:%s]\n", + encoder->base.id, encoder->name); + /* * Each encoder has at most one connector (since we always steal * it away), so we won't call call mode_set hooks twice. @@ -758,13 +807,23 @@ void drm_atomic_helper_commit_post_planes(struct drm_device *dev, crtc = old_state->crtcs[i]; /* Need to filter out CRTCs where only planes change. */ - if (!crtc || !crtc->state->mode_changed) + if (!crtc || !needs_modeset(crtc->state)) + continue; + + if (!crtc->state->active) continue; funcs = crtc->helper_private; - if (crtc->state->enable) - funcs->commit(crtc); + if (crtc->state->enable) { + DRM_DEBUG_KMS("enabling [CRTC:%d]\n", + crtc->base.id); + + if (funcs->enable) + funcs->enable(crtc); + else + funcs->commit(crtc); + } } for (i = 0; i < old_state->num_connector; i++) { @@ -777,9 +836,15 @@ void drm_atomic_helper_commit_post_planes(struct drm_device *dev, if (!connector || !connector->state->best_encoder) continue; + if (!connector->state->crtc->state->active) + continue; + encoder = connector->state->best_encoder; funcs = encoder->helper_private; + DRM_DEBUG_KMS("enabling [ENCODER:%d:%s]\n", + encoder->base.id, encoder->name); + /* * Each encoder has at most one connector (since we always steal * it away), so we won't call call enable hooks twice. @@ -787,7 +852,10 @@ void drm_atomic_helper_commit_post_planes(struct drm_device *dev, if (encoder->bridge) encoder->bridge->funcs->pre_enable(encoder->bridge); - funcs->commit(encoder); + if (funcs->enable) + funcs->enable(encoder); + else + funcs->commit(encoder); if (encoder->bridge) encoder->bridge->funcs->enable(encoder->bridge); @@ -877,6 +945,11 @@ drm_atomic_helper_wait_for_vblanks(struct drm_device *dev, if (!crtc->state->enable) continue; + /* Legacy cursor ioctls are completely unsynced, and userspace + * relies on that (by doing tons of cursor updates). */ + if (old_state->legacy_cursor_update) + continue; + if (!framebuffer_changed(dev, old_state, crtc)) continue; @@ -1310,6 +1383,9 @@ retry: if (ret != 0) goto fail; + if (plane == crtc->cursor) + state->legacy_cursor_update = true; + /* Driver takes ownership of state on successful commit. */ return 0; fail: @@ -1385,6 +1461,9 @@ retry: plane_state->src_h = 0; plane_state->src_w = 0; + if (plane == plane->crtc->cursor) + state->legacy_cursor_update = true; + ret = drm_atomic_commit(state); if (ret != 0) goto fail; @@ -1534,6 +1613,7 @@ retry: WARN_ON(set->num_connectors); crtc_state->enable = false; + crtc_state->active = false; ret = drm_atomic_set_crtc_for_plane(primary_state, NULL); if (ret != 0) @@ -1548,6 +1628,7 @@ retry: WARN_ON(!set->num_connectors); crtc_state->enable = true; + crtc_state->active = true; drm_mode_copy(&crtc_state->mode, set->mode); ret = drm_atomic_set_crtc_for_plane(primary_state, crtc); @@ -1860,6 +1941,83 @@ backoff: EXPORT_SYMBOL(drm_atomic_helper_page_flip); /** + * drm_atomic_helper_connector_dpms() - connector dpms helper implementation + * @connector: affected connector + * @mode: DPMS mode + * + * This is the main helper function provided by the atomic helper framework for + * implementing the legacy DPMS connector interface. It computes the new desired + * ->active state for the corresponding CRTC (if the connector is enabled) and + * updates it. + */ +void drm_atomic_helper_connector_dpms(struct drm_connector *connector, + int mode) +{ + struct drm_mode_config *config = &connector->dev->mode_config; + struct drm_atomic_state *state; + struct drm_crtc_state *crtc_state; + struct drm_crtc *crtc; + struct drm_connector *tmp_connector; + int ret; + bool active = false; + + if (mode != DRM_MODE_DPMS_ON) + mode = DRM_MODE_DPMS_OFF; + + connector->dpms = mode; + crtc = connector->state->crtc; + + if (!crtc) + return; + + /* FIXME: ->dpms has no return value so can't forward the -ENOMEM. */ + state = drm_atomic_state_alloc(connector->dev); + if (!state) + return; + + state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc); +retry: + crtc_state = drm_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) + return; + + WARN_ON(!drm_modeset_is_locked(&config->connection_mutex)); + + list_for_each_entry(tmp_connector, &config->connector_list, head) { + if (connector->state->crtc != crtc) + continue; + + if (connector->dpms == DRM_MODE_DPMS_ON) { + active = true; + break; + } + } + crtc_state->active = active; + + ret = drm_atomic_commit(state); + if (ret != 0) + goto fail; + + /* Driver takes ownership of state on successful async commit. */ + return; +fail: + if (ret == -EDEADLK) + goto backoff; + + drm_atomic_state_free(state); + + WARN(1, "Driver bug: Changing ->active failed with ret=%i\n", ret); + + return; +backoff: + drm_atomic_state_clear(state); + drm_atomic_legacy_backoff(state); + + goto retry; +} +EXPORT_SYMBOL(drm_atomic_helper_connector_dpms); + +/** * DOC: atomic state reset and initialization * * Both the drm core and the atomic helpers assume that there is always the full @@ -1910,6 +2068,7 @@ drm_atomic_helper_crtc_duplicate_state(struct drm_crtc *crtc) if (state) { state->mode_changed = false; + state->active_changed = false; state->planes_changed = false; state->event = NULL; } diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index ad2934ba0bd2..b459888f6310 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -691,6 +691,10 @@ int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, if (cursor) cursor->possible_crtcs = 1 << drm_crtc_index(crtc); + if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { + drm_object_attach_property(&crtc->base, config->prop_active, 0); + } + return 0; } EXPORT_SYMBOL(drm_crtc_init_with_planes); @@ -1481,6 +1485,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev) return -ENOMEM; dev->mode_config.prop_crtc_id = prop; + prop = drm_property_create_bool(dev, DRM_MODE_PROP_ATOMIC, + "ACTIVE"); + if (!prop) + return -ENOMEM; + dev->mode_config.prop_active = prop; + return 0; } @@ -3810,7 +3820,7 @@ static struct drm_property *property_create_range(struct drm_device *dev, } /** - * drm_property_create_range - create a new ranged property type + * drm_property_create_range - create a new unsigned ranged property type * @dev: drm device * @flags: flags specifying the property type * @name: name of the property @@ -3821,8 +3831,8 @@ static struct drm_property *property_create_range(struct drm_device *dev, * object with drm_object_attach_property. The returned property object must be * freed with drm_property_destroy. * - * Userspace is allowed to set any integer value in the (min, max) range - * inclusive. + * Userspace is allowed to set any unsigned integer value in the (min, max) + * range inclusive. * * Returns: * A pointer to the newly created property on success, NULL on failure. @@ -3836,6 +3846,24 @@ struct drm_property *drm_property_create_range(struct drm_device *dev, int flags } EXPORT_SYMBOL(drm_property_create_range); +/** + * drm_property_create_signed_range - create a new signed ranged property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @min: minimum value of the property + * @max: maximum value of the property + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy. + * + * Userspace is allowed to set any signed integer value in the (min, max) + * range inclusive. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ struct drm_property *drm_property_create_signed_range(struct drm_device *dev, int flags, const char *name, int64_t min, int64_t max) @@ -3845,6 +3873,23 @@ struct drm_property *drm_property_create_signed_range(struct drm_device *dev, } EXPORT_SYMBOL(drm_property_create_signed_range); +/** + * drm_property_create_object - create a new object property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @type: object type from DRM_MODE_OBJECT_* defines + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy. + * + * Userspace is only allowed to set this to any property value of the given + * @type. Only useful for atomic properties, which is enforced. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ struct drm_property *drm_property_create_object(struct drm_device *dev, int flags, const char *name, uint32_t type) { @@ -3852,6 +3897,9 @@ struct drm_property *drm_property_create_object(struct drm_device *dev, flags |= DRM_MODE_PROP_OBJECT; + if (WARN_ON(!(flags & DRM_MODE_PROP_ATOMIC))) + return NULL; + property = drm_property_create(dev, flags, name, 1); if (!property) return NULL; @@ -3863,6 +3911,28 @@ struct drm_property *drm_property_create_object(struct drm_device *dev, EXPORT_SYMBOL(drm_property_create_object); /** + * drm_property_create_bool - create a new boolean property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy. + * + * This is implemented as a ranged property with only {0, 1} as valid values. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ +struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags, + const char *name) +{ + return drm_property_create_range(dev, flags, name, 0, 1); +} +EXPORT_SYMBOL(drm_property_create_bool); + +/** * drm_property_add_enum - add a possible value to an enumeration property * @property: enumeration property to change * @index: index of the new enumeration diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c index 4dcdcad9f16d..5ba5792bfdba 100644 --- a/drivers/gpu/drm/drm_plane_helper.c +++ b/drivers/gpu/drm/drm_plane_helper.c @@ -435,7 +435,8 @@ int drm_plane_helper_commit(struct drm_plane *plane, goto out; } - if (plane_funcs->prepare_fb && plane_state->fb) { + if (plane_funcs->prepare_fb && plane_state->fb && + plane_state->fb != old_fb) { ret = plane_funcs->prepare_fb(plane, plane_state->fb); if (ret) goto out; @@ -464,6 +465,13 @@ int drm_plane_helper_commit(struct drm_plane *plane, crtc_funcs[i]->atomic_flush(crtc[i]); } + /* + * If we only moved the plane and didn't change fb's, there's no need to + * wait for vblank. + */ + if (plane->state->fb == old_fb) + goto out; + for (i = 0; i < 2; i++) { if (!crtc[i]) continue; @@ -492,7 +500,7 @@ out: } /** - * drm_plane_helper_update() - Helper for primary plane update + * drm_plane_helper_update() - Transitional helper for plane update * @plane: plane object to update * @crtc: owning CRTC of owning plane * @fb: framebuffer to flip onto plane @@ -549,7 +557,7 @@ int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc, EXPORT_SYMBOL(drm_plane_helper_update); /** - * drm_plane_helper_disable() - Helper for primary plane disable + * drm_plane_helper_disable() - Transitional helper for plane disable * @plane: plane to disable * * Provides a default plane disable handler using the atomic plane update |
