1 files changed, 158 insertions, 17 deletions

diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
index 267a3d3e79f4..1a50cd3b4233 100644
--- a/drivers/ata/ahci_da850.c
+++ b/drivers/ata/ahci_da850.c
@@ -16,7 +16,8 @@
 #include <linux/ahci_platform.h>
 #include "ahci.h"
 
-#define DRV_NAME "ahci_da850"
+#define DRV_NAME		"ahci_da850"
+#define HARDRESET_RETRIES	5
 
 /* SATA PHY Control Register offset from AHCI base */
 #define SATA_P0PHYCR_REG	0x178
@@ -28,17 +29,8 @@
 #define SATA_PHY_TXSWING(x)	((x) << 19)
 #define SATA_PHY_ENPLL(x)	((x) << 31)
 
-/*
- * The multiplier needed for 1.5GHz PLL output.
- *
- * NOTE: This is currently hardcoded to be suitable for 100MHz crystal
- * frequency (which is used by DA850 EVM board) and may need to be changed
- * if you would like to use this driver on some other board.
- */
-#define DA850_SATA_CLK_MULTIPLIER	7
-
 static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg,
-			    void __iomem *ahci_base)
+			    void __iomem *ahci_base, u32 mpy)
 {
 	unsigned int val;
 
@@ -47,18 +39,122 @@ static void da850_sata_init(struct device *dev, void __iomem *pwrdn_reg,
 	val &= ~BIT(0);
 	writel(val, pwrdn_reg);
 
-	val = SATA_PHY_MPY(DA850_SATA_CLK_MULTIPLIER + 1) | SATA_PHY_LOS(1) |
-	      SATA_PHY_RXCDR(4) | SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) |
-	      SATA_PHY_ENPLL(1);
+	val = SATA_PHY_MPY(mpy) | SATA_PHY_LOS(1) | SATA_PHY_RXCDR(4) |
+	      SATA_PHY_RXEQ(1) | SATA_PHY_TXSWING(3) | SATA_PHY_ENPLL(1);
 
 	writel(val, ahci_base + SATA_P0PHYCR_REG);
 }
 
+static u32 ahci_da850_calculate_mpy(unsigned long refclk_rate)
+{
+	u32 pll_output = 1500000000, needed;
+
+	/*
+	 * We need to determine the value of the multiplier (MPY) bits.
+	 * In order to include the 12.5 multiplier we need to first divide
+	 * the refclk rate by ten.
+	 *
+	 * __div64_32() turned out to be unreliable, sometimes returning
+	 * false results.
+	 */
+	WARN((refclk_rate % 10) != 0, "refclk must be divisible by 10");
+	needed = pll_output / (refclk_rate / 10);
+
+	/*
+	 * What we have now is (multiplier * 10).
+	 *
+	 * Let's determine the actual register value we need to write.
+	 */
+
+	switch (needed) {
+	case 50:
+		return 0x1;
+	case 60:
+		return 0x2;
+	case 80:
+		return 0x4;
+	case 100:
+		return 0x5;
+	case 120:
+		return 0x6;
+	case 125:
+		return 0x7;
+	case 150:
+		return 0x8;
+	case 200:
+		return 0x9;
+	case 250:
+		return 0xa;
+	default:
+		/*
+		 * We should have divided evenly - if not, return an invalid
+		 * value.
+		 */
+		return 0;
+	}
+}
+
+static int ahci_da850_softreset(struct ata_link *link,
+				unsigned int *class, unsigned long deadline)
+{
+	int pmp, ret;
+
+	pmp = sata_srst_pmp(link);
+
+	/*
+	 * There's an issue with the SATA controller on da850 SoCs: if we
+	 * enable Port Multiplier support, but the drive is connected directly
+	 * to the board, it can't be detected. As a workaround: if PMP is
+	 * enabled, we first call ahci_do_softreset() and pass it the result of
+	 * sata_srst_pmp(). If this call fails, we retry with pmp = 0.
+	 */
+	ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+	if (pmp && ret == -EBUSY)
+		return ahci_do_softreset(link, class, 0,
+					 deadline, ahci_check_ready);
+
+	return ret;
+}
+
+static int ahci_da850_hardreset(struct ata_link *link,
+				unsigned int *class, unsigned long deadline)
+{
+	int ret, retry = HARDRESET_RETRIES;
+	bool online;
+
+	/*
+	 * In order to correctly service the LCD controller of the da850 SoC,
+	 * we increased the PLL0 frequency to 456MHz from the default 300MHz.
+	 *
+	 * This made the SATA controller unstable and the hardreset operation
+	 * does not always succeed the first time. Before really giving up to
+	 * bring up the link, retry the reset a couple times.
+	 */
+	do {
+		ret = ahci_do_hardreset(link, class, deadline, &online);
+		if (online)
+			return ret;
+	} while (retry--);
+
+	return ret;
+}
+
+static struct ata_port_operations ahci_da850_port_ops = {
+	.inherits = &ahci_platform_ops,
+	.softreset = ahci_da850_softreset,
+	/*
+	 * No need to override .pmp_softreset - it's only used for actual
+	 * PMP-enabled ports.
+	 */
+	.hardreset = ahci_da850_hardreset,
+	.pmp_hardreset = ahci_da850_hardreset,
+};
+
 static const struct ata_port_info ahci_da850_port_info = {
 	.flags		= AHCI_FLAG_COMMON,
 	.pio_mask	= ATA_PIO4,
 	.udma_mask	= ATA_UDMA6,
-	.port_ops	= &ahci_platform_ops,
+	.port_ops	= &ahci_da850_port_ops,
 };
 
 static struct scsi_host_template ahci_platform_sht = {
@@ -69,14 +165,52 @@ static int ahci_da850_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_host_priv *hpriv;
-	struct resource *res;
 	void __iomem *pwrdn_reg;
+	struct resource *res;
+	struct clk *clk;
+	u32 mpy;
 	int rc;
 
 	hpriv = ahci_platform_get_resources(pdev);
 	if (IS_ERR(hpriv))
 		return PTR_ERR(hpriv);
 
+	/*
+	 * Internally ahci_platform_get_resources() calls clk_get(dev, NULL)
+	 * when trying to obtain the functional clock. This SATA controller
+	 * uses two clocks for which we specify two connection ids. If we don't
+	 * have the functional clock at this point - call clk_get() again with
+	 * con_id = "fck".
+	 */
+	if (!hpriv->clks[0]) {
+		clk = clk_get(dev, "fck");
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+
+		hpriv->clks[0] = clk;
+	}
+
+	/*
+	 * The second clock used by ahci-da850 is the external REFCLK. If we
+	 * didn't get it from ahci_platform_get_resources(), let's try to
+	 * specify the con_id in clk_get().
+	 */
+	if (!hpriv->clks[1]) {
+		clk = clk_get(dev, "refclk");
+		if (IS_ERR(clk)) {
+			dev_err(dev, "unable to obtain the reference clock");
+			return -ENODEV;
+		}
+
+		hpriv->clks[1] = clk;
+	}
+
+	mpy = ahci_da850_calculate_mpy(clk_get_rate(hpriv->clks[1]));
+	if (mpy == 0) {
+		dev_err(dev, "invalid REFCLK multiplier value: 0x%x", mpy);
+		return -EINVAL;
+	}
+
 	rc = ahci_platform_enable_resources(hpriv);
 	if (rc)
 		return rc;
@@ -89,7 +223,7 @@ static int ahci_da850_probe(struct platform_device *pdev)
 	if (!pwrdn_reg)
 		goto disable_resources;
 
-	da850_sata_init(dev, pwrdn_reg, hpriv->mmio);
+	da850_sata_init(dev, pwrdn_reg, hpriv->mmio, mpy);
 
 	rc = ahci_platform_init_host(pdev, hpriv, &ahci_da850_port_info,
 				     &ahci_platform_sht);
@@ -105,11 +239,18 @@ disable_resources:
 static SIMPLE_DEV_PM_OPS(ahci_da850_pm_ops, ahci_platform_suspend,
 			 ahci_platform_resume);
 
+static const struct of_device_id ahci_da850_of_match[] = {
+	{ .compatible = "ti,da850-ahci", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ahci_da850_of_match);
+
 static struct platform_driver ahci_da850_driver = {
 	.probe = ahci_da850_probe,
 	.remove = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
+		.of_match_table = ahci_da850_of_match,
 		.pm = &ahci_da850_pm_ops,
 	},
 };