diff options
Diffstat (limited to 'arch/powerpc/platforms/cell')
| -rw-r--r-- | arch/powerpc/platforms/cell/spufs/Makefile | 49 | ||||
| -rw-r--r-- | arch/powerpc/platforms/cell/spufs/spu_restore.c | 336 | ||||
| -rw-r--r-- | arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S | 116 | ||||
| -rw-r--r-- | arch/powerpc/platforms/cell/spufs/spu_save.c | 195 | ||||
| -rw-r--r-- | arch/powerpc/platforms/cell/spufs/spu_save_crt0.S | 102 | ||||
| -rw-r--r-- | arch/powerpc/platforms/cell/spufs/spu_utils.h | 160 |
6 files changed, 958 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index e70e3cc1158f..b38ab747efd7 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -2,4 +2,53 @@ obj-$(CONFIG_SPU_FS) += spufs.o spufs-y += inode.o file.o context.o switch.o syscalls.o +# Rules to build switch.o with the help of SPU tool chain +SPU_CROSS := spu- +SPU_CC := $(SPU_CROSS)gcc +SPU_AS := $(SPU_CROSS)gcc +SPU_LD := $(SPU_CROSS)ld +SPU_OBJCOPY := $(SPU_CROSS)objcopy +SPU_CFLAGS := -O2 -Wall -I$(srctree)/include -I$(objtree)/include2 +SPU_AFLAGS := -c -D__ASSEMBLY__ -I$(srctree)/include -I$(objtree)/include2 +SPU_LDFLAGS := -N -Ttext=0x0 + $(obj)/switch.o: $(obj)/spu_save_dump.h $(obj)/spu_restore_dump.h + +# Compile SPU files + cmd_spu_cc = $(SPU_CC) $(SPU_CFLAGS) -c -o $@ $< +quiet_cmd_spu_cc = SPU_CC $@ +$(obj)/spu_%.o: $(src)/spu_%.c + $(call if_changed,spu_cc) + +# Assemble SPU files + cmd_spu_as = $(SPU_AS) $(SPU_AFLAGS) -o $@ $< +quiet_cmd_spu_as = SPU_AS $@ +$(obj)/spu_%.o: $(src)/spu_%.S + $(call if_changed,spu_as) + +# Link SPU Executables + cmd_spu_ld = $(SPU_LD) $(SPU_LDFLAGS) -o $@ $^ +quiet_cmd_spu_ld = SPU_LD $@ +$(obj)/spu_%: $(obj)/spu_%_crt0.o $(obj)/spu_%.o + $(call if_changed,spu_ld) + +# Copy into binary format + cmd_spu_objcopy = $(SPU_OBJCOPY) -O binary $< $@ +quiet_cmd_spu_objcopy = OBJCOPY $@ +$(obj)/spu_%.bin: $(src)/spu_% + $(call if_changed,spu_objcopy) + +# create C code from ELF executable +cmd_hexdump = ( \ + echo "/*" ; \ + echo " * $*_dump.h: Copyright (C) 2005 IBM." ; \ + echo " * Hex-dump auto generated from $*.c." ; \ + echo " * Do not edit!" ; \ + echo " */" ; \ + echo "static unsigned int $*_code[] __page_aligned = {" ; \ + hexdump -v -e '4/4 "0x%08x, " "\n"' $< ; \ + echo "};" ; \ + ) > $@ +quiet_cmd_hexdump = HEXDUMP $@ +$(obj)/%_dump.h: $(obj)/%.bin + $(call if_changed,hexdump) diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore.c b/arch/powerpc/platforms/cell/spufs/spu_restore.c new file mode 100644 index 000000000000..0bf723dcd677 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_restore.c @@ -0,0 +1,336 @@ +/* + * spu_restore.c + * + * (C) Copyright IBM Corp. 2005 + * + * SPU-side context restore sequence outlined in + * Synergistic Processor Element Book IV + * + * Author: Mark Nutter <mnutter@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#ifndef LS_SIZE +#define LS_SIZE 0x40000 /* 256K (in bytes) */ +#endif + +typedef unsigned int u32; +typedef unsigned long long u64; + +#include <spu_intrinsics.h> +#include <asm/spu_csa.h> +#include "spu_utils.h" + +#define BR_INSTR 0x327fff80 /* br -4 */ +#define NOP_INSTR 0x40200000 /* nop */ +#define HEQ_INSTR 0x7b000000 /* heq $0, $0 */ +#define STOP_INSTR 0x00000000 /* stop 0x0 */ +#define ILLEGAL_INSTR 0x00800000 /* illegal instr */ +#define RESTORE_COMPLETE 0x00003ffc /* stop 0x3ffc */ + +static inline void fetch_regs_from_mem(addr64 lscsa_ea) +{ + unsigned int ls = (unsigned int)®s_spill[0]; + unsigned int size = sizeof(regs_spill); + unsigned int tag_id = 0; + unsigned int cmd = 0x40; /* GET */ + + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, lscsa_ea.ui[1]); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void restore_upper_240kb(addr64 lscsa_ea) +{ + unsigned int ls = 16384; + unsigned int list = (unsigned int)&dma_list[0]; + unsigned int size = sizeof(dma_list); + unsigned int tag_id = 0; + unsigned int cmd = 0x44; /* GETL */ + + /* Restore, Step 4: + * Enqueue the GETL command (tag 0) to the MFC SPU command + * queue to transfer the upper 240 kb of LS from CSA. + */ + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, list); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void restore_decr(void) +{ + unsigned int offset; + unsigned int decr_running; + unsigned int decr; + + /* Restore, Step 6: + * If the LSCSA "decrementer running" flag is set + * then write the SPU_WrDec channel with the + * decrementer value from LSCSA. + */ + offset = LSCSA_QW_OFFSET(decr_status); + decr_running = regs_spill[offset].slot[0]; + if (decr_running) { + offset = LSCSA_QW_OFFSET(decr); + decr = regs_spill[offset].slot[0]; + spu_writech(SPU_WrDec, decr); + } +} + +static inline void write_ppu_mb(void) +{ + unsigned int offset; + unsigned int data; + + /* Restore, Step 11: + * Write the MFC_WrOut_MB channel with the PPU_MB + * data from LSCSA. + */ + offset = LSCSA_QW_OFFSET(ppu_mb); + data = regs_spill[offset].slot[0]; + spu_writech(SPU_WrOutMbox, data); +} + +static inline void write_ppuint_mb(void) +{ + unsigned int offset; + unsigned int data; + + /* Restore, Step 12: + * Write the MFC_WrInt_MB channel with the PPUINT_MB + * data from LSCSA. + */ + offset = LSCSA_QW_OFFSET(ppuint_mb); + data = regs_spill[offset].slot[0]; + spu_writech(SPU_WrOutIntrMbox, data); +} + +static inline void restore_fpcr(void) +{ + unsigned int offset; + vector unsigned int fpcr; + + /* Restore, Step 13: + * Restore the floating-point status and control + * register from the LSCSA. + */ + offset = LSCSA_QW_OFFSET(fpcr); + fpcr = regs_spill[offset].v; + spu_mtfpscr(fpcr); +} + +static inline void restore_srr0(void) +{ + unsigned int offset; + unsigned int srr0; + + /* Restore, Step 14: + * Restore the SPU SRR0 data from the LSCSA. + */ + offset = LSCSA_QW_OFFSET(srr0); + srr0 = regs_spill[offset].slot[0]; + spu_writech(SPU_WrSRR0, srr0); +} + +static inline void restore_event_mask(void) +{ + unsigned int offset; + unsigned int event_mask; + + /* Restore, Step 15: + * Restore the SPU_RdEventMsk data from the LSCSA. + */ + offset = LSCSA_QW_OFFSET(event_mask); + event_mask = regs_spill[offset].slot[0]; + spu_writech(SPU_WrEventMask, event_mask); +} + +static inline void restore_tag_mask(void) +{ + unsigned int offset; + unsigned int tag_mask; + + /* Restore, Step 16: + * Restore the SPU_RdTagMsk data from the LSCSA. + */ + offset = LSCSA_QW_OFFSET(tag_mask); + tag_mask = regs_spill[offset].slot[0]; + spu_writech(MFC_WrTagMask, tag_mask); +} + +static inline void restore_complete(void) +{ + extern void exit_fini(void); + unsigned int *exit_instrs = (unsigned int *)exit_fini; + unsigned int offset; + unsigned int stopped_status; + unsigned int stopped_code; + + /* Restore, Step 18: + * Issue a stop-and-signal instruction with + * "good context restore" signal value. + * + * Restore, Step 19: + * There may be additional instructions placed + * here by the PPE Sequence for SPU Context + * Restore in order to restore the correct + * "stopped state". + * + * This step is handled here by analyzing the + * LSCSA.stopped_status and then modifying the + * exit() function to behave appropriately. + */ + + offset = LSCSA_QW_OFFSET(stopped_status); + stopped_status = regs_spill[offset].slot[0]; + stopped_code = regs_spill[offset].slot[1]; + + switch (stopped_status) { + case SPU_STOPPED_STATUS_P_I: + /* SPU_Status[P,I]=1. Add illegal instruction + * followed by stop-and-signal instruction after + * end of restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = ILLEGAL_INSTR; + exit_instrs[2] = STOP_INSTR | stopped_code; + break; + case SPU_STOPPED_STATUS_P_H: + /* SPU_Status[P,H]=1. Add 'heq $0, $0' followed + * by stop-and-signal instruction after end of + * restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = HEQ_INSTR; + exit_instrs[2] = STOP_INSTR | stopped_code; + break; + case SPU_STOPPED_STATUS_S_P: + /* SPU_Status[S,P]=1. Add nop instruction + * followed by 'br -4' after end of restore + * code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = STOP_INSTR | stopped_code; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_S_I: + /* SPU_Status[S,I]=1. Add illegal instruction + * followed by 'br -4' after end of restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = ILLEGAL_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_I: + /* SPU_Status[I]=1. Add illegal instruction followed + * by infinite loop after end of restore sequence. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = ILLEGAL_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_S: + /* SPU_Status[S]=1. Add two 'nop' instructions. */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = NOP_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_H: + /* SPU_Status[H]=1. Add 'heq $0, $0' instruction + * after end of restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = HEQ_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + case SPU_STOPPED_STATUS_P: + /* SPU_Status[P]=1. Add stop-and-signal instruction + * after end of restore code. + */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = STOP_INSTR | stopped_code; + break; + case SPU_STOPPED_STATUS_R: + /* SPU_Status[I,S,H,P,R]=0. Add infinite loop. */ + exit_instrs[0] = RESTORE_COMPLETE; + exit_instrs[1] = NOP_INSTR; + exit_instrs[2] = NOP_INSTR; + exit_instrs[3] = BR_INSTR; + break; + default: + /* SPU_Status[R]=1. No additonal instructions. */ + break; + } + spu_sync(); +} + +/** + * main - entry point for SPU-side context restore. + * + * This code deviates from the documented sequence in the + * following aspects: + * + * 1. The EA for LSCSA is passed from PPE in the + * signal notification channels. + * 2. The register spill area is pulled by SPU + * into LS, rather than pushed by PPE. + * 3. All 128 registers are restored by exit(). + * 4. The exit() function is modified at run + * time in order to properly restore the + * SPU_Status register. + */ +int main() +{ + addr64 lscsa_ea; + + lscsa_ea.ui[0] = spu_readch(SPU_RdSigNotify1); + lscsa_ea.ui[1] = spu_readch(SPU_RdSigNotify2); + fetch_regs_from_mem(lscsa_ea); + + set_event_mask(); /* Step 1. */ + set_tag_mask(); /* Step 2. */ + build_dma_list(lscsa_ea); /* Step 3. */ + restore_upper_240kb(lscsa_ea); /* Step 4. */ + /* Step 5: done by 'exit'. */ + restore_decr(); /* Step 6. */ + enqueue_putllc(lscsa_ea); /* Step 7. */ + set_tag_update(); /* Step 8. */ + read_tag_status(); /* Step 9. */ + read_llar_status(); /* Step 10. */ + write_ppu_mb(); /* Step 11. */ + write_ppuint_mb(); /* Step 12. */ + restore_fpcr(); /* Step 13. */ + restore_srr0(); /* Step 14. */ + restore_event_mask(); /* Step 15. */ + restore_tag_mask(); /* Step 16. */ + /* Step 17. done by 'exit'. */ + restore_complete(); /* Step 18. */ + + return 0; +} diff --git a/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S b/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S new file mode 100644 index 000000000000..2905949debe1 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_restore_crt0.S @@ -0,0 +1,116 @@ +/* + * crt0_r.S: Entry function for SPU-side context restore. + * + * Copyright (C) 2005 IBM + * + * Entry and exit function for SPU-side of the context restore + * sequence. Sets up an initial stack frame, then branches to + * 'main'. On return, restores all 128 registers from the LSCSA + * and exits. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <asm/spu_csa.h> + +.data +.align 7 +.globl regs_spill +regs_spill: +.space SIZEOF_SPU_SPILL_REGS, 0x0 + +.text +.global _start +_start: + /* Initialize the stack pointer to point to 16368 + * (16kb-16). The back chain pointer is initialized + * to NULL. + */ + il $0, 0 + il $SP, 16368 + stqd $0, 0($SP) + + /* Allocate a minimum stack frame for the called main. + * This is needed so that main has a place to save the + * link register when it calls another function. + */ + stqd $SP, -160($SP) + ai $SP, $SP, -160 + + /* Call the program's main function. */ + brsl $0, main + +.global exit +.global _exit +exit: +_exit: + /* SPU Context Restore, Step 5: Restore the remaining 112 GPRs. */ + ila $3, regs_spill + 256 +restore_regs: + lqr $4, restore_reg_insts +restore_reg_loop: + ai $4, $4, 4 + .balignl 16, 0x40200000 +restore_reg_insts: /* must be quad-word aligned. */ + lqd $16, 0($3) + lqd $17, 16($3) + lqd $18, 32($3) + lqd $19, 48($3) + andi $5, $4, 0x7F + stqr $4, restore_reg_insts + ai $3, $3, 64 + brnz $5, restore_reg_loop + + /* SPU Context Restore Step 17: Restore the first 16 GPRs. */ + lqa $0, regs_spill + 0 + lqa $1, regs_spill + 16 + lqa $2, regs_spill + 32 + lqa $3, regs_spill + 48 + lqa $4, regs_spill + 64 + lqa $5, regs_spill + 80 + lqa $6, regs_spill + 96 + lqa $7, regs_spill + 112 + lqa $8, regs_spill + 128 + lqa $9, regs_spill + 144 + lqa $10, regs_spill + 160 + lqa $11, regs_spill + 176 + lqa $12, regs_spill + 192 + lqa $13, regs_spill + 208 + lqa $14, regs_spill + 224 + lqa $15, regs_spill + 240 + + /* Under normal circumstances, the 'exit' function + * terminates with 'stop SPU_RESTORE_COMPLETE', + * indicating that the SPU-side restore code has + * completed. + * + * However it is possible that instructions immediately + * following the 'stop 0x3ffc' have been modified at run + * time so as to recreate the exact SPU_Status settings + * from the application, e.g. illegal instruciton, halt, + * etc. + */ +.global exit_fini +.global _exit_fini +exit_fini: +_exit_fini: + stop SPU_RESTORE_COMPLETE + stop 0 + stop 0 + stop 0 + + /* Pad the size of this crt0.o to be multiple of 16 bytes. */ +.balignl 16, 0x0 diff --git a/arch/powerpc/platforms/cell/spufs/spu_save.c b/arch/powerpc/platforms/cell/spufs/spu_save.c new file mode 100644 index 000000000000..196033b8a579 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_save.c @@ -0,0 +1,195 @@ +/* + * spu_save.c + * + * (C) Copyright IBM Corp. 2005 + * + * SPU-side context save sequence outlined in + * Synergistic Processor Element Book IV + * + * Author: Mark Nutter <mnutter@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#ifndef LS_SIZE +#define LS_SIZE 0x40000 /* 256K (in bytes) */ +#endif + +typedef unsigned int u32; +typedef unsigned long long u64; + +#include <spu_intrinsics.h> +#include <asm/spu_csa.h> +#include "spu_utils.h" + +static inline void save_event_mask(void) +{ + unsigned int offset; + + /* Save, Step 2: + * Read the SPU_RdEventMsk channel and save to the LSCSA. + */ + offset = LSCSA_QW_OFFSET(event_mask); + regs_spill[offset].slot[0] = spu_readch(SPU_RdEventStatMask); +} + +static inline void save_tag_mask(void) +{ + unsigned int offset; + + /* Save, Step 3: + * Read the SPU_RdTagMsk channel and save to the LSCSA. + */ + offset = LSCSA_QW_OFFSET(tag_mask); + regs_spill[offset].slot[0] = spu_readch(MFC_RdTagMask); +} + +static inline void save_upper_240kb(addr64 lscsa_ea) +{ + unsigned int ls = 16384; + unsigned int list = (unsigned int)&dma_list[0]; + unsigned int size = sizeof(dma_list); + unsigned int tag_id = 0; + unsigned int cmd = 0x24; /* PUTL */ + + /* Save, Step 7: + * Enqueue the PUTL command (tag 0) to the MFC SPU command + * queue to transfer the remaining 240 kb of LS to CSA. + */ + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, list); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void save_fpcr(void) +{ + // vector unsigned int fpcr; + unsigned int offset; + + /* Save, Step 9: + * Issue the floating-point status and control register + * read instruction, and save to the LSCSA. + */ + offset = LSCSA_QW_OFFSET(fpcr); + regs_spill[offset].v = spu_mffpscr(); +} + +static inline void save_decr(void) +{ + unsigned int offset; + + /* Save, Step 10: + * Read and save the SPU_RdDec channel data to + * the LSCSA. + */ + offset = LSCSA_QW_OFFSET(decr); + regs_spill[offset].slot[0] = spu_readch(SPU_RdDec); +} + +static inline void save_srr0(void) +{ + unsigned int offset; + + /* Save, Step 11: + * Read and save the SPU_WSRR0 channel data to + * the LSCSA. + */ + offset = LSCSA_QW_OFFSET(srr0); + regs_spill[offset].slot[0] = spu_readch(SPU_RdSRR0); +} + +static inline void spill_regs_to_mem(addr64 lscsa_ea) +{ + unsigned int ls = (unsigned int)®s_spill[0]; + unsigned int size = sizeof(regs_spill); + unsigned int tag_id = 0; + unsigned int cmd = 0x20; /* PUT */ + + /* Save, Step 13: + * Enqueue a PUT command (tag 0) to send the LSCSA + * to the CSA. + */ + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, lscsa_ea.ui[1]); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void enqueue_sync(addr64 lscsa_ea) +{ + unsigned int tag_id = 0; + unsigned int cmd = 0xCC; + + /* Save, Step 14: + * Enqueue an MFC_SYNC command (tag 0). + */ + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void save_complete(void) +{ + /* Save, Step 18: + * Issue a stop-and-signal instruction indicating + * "save complete". Note: This function will not + * return!! + */ + spu_stop(SPU_SAVE_COMPLETE); +} + +/** + * main - entry point for SPU-side context save. + * + * This code deviates from the documented sequence as follows: + * + * 1. The EA for LSCSA is passed from PPE in the + * signal notification channels. + * 2. All 128 registers are saved by crt0.o. + */ +int main() +{ + addr64 lscsa_ea; + + lscsa_ea.ui[0] = spu_readch(SPU_RdSigNotify1); + lscsa_ea.ui[1] = spu_readch(SPU_RdSigNotify2); + + /* Step 1: done by exit(). */ + save_event_mask(); /* Step 2. */ + save_tag_mask(); /* Step 3. */ + set_event_mask(); /* Step 4. */ + set_tag_mask(); /* Step 5. */ + build_dma_list(lscsa_ea); /* Step 6. */ + save_upper_240kb(lscsa_ea); /* Step 7. */ + /* Step 8: done by exit(). */ + save_fpcr(); /* Step 9. */ + save_decr(); /* Step 10. */ + save_srr0(); /* Step 11. */ + enqueue_putllc(lscsa_ea); /* Step 12. */ + spill_regs_to_mem(lscsa_ea); /* Step 13. */ + enqueue_sync(lscsa_ea); /* Step 14. */ + set_tag_update(); /* Step 15. */ + read_tag_status(); /* Step 16. */ + read_llar_status(); /* Step 17. */ + save_complete(); /* Step 18. */ + + return 0; +} diff --git a/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S b/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S new file mode 100644 index 000000000000..6659d6a66faa --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_save_crt0.S @@ -0,0 +1,102 @@ +/* + * crt0_s.S: Entry function for SPU-side context save. + * + * Copyright (C) 2005 IBM + * + * Entry function for SPU-side of the context save sequence. + * Saves all 128 GPRs, sets up an initial stack frame, then + * branches to 'main'. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <asm/spu_csa.h> + +.data +.align 7 +.globl regs_spill +regs_spill: +.space SIZEOF_SPU_SPILL_REGS, 0x0 + +.text +.global _start +_start: + /* SPU Context Save Step 1: Save the first 16 GPRs. */ + stqa $0, regs_spill + 0 + stqa $1, regs_spill + 16 + stqa $2, regs_spill + 32 + stqa $3, regs_spill + 48 + stqa $4, regs_spill + 64 + stqa $5, regs_spill + 80 + stqa $6, regs_spill + 96 + stqa $7, regs_spill + 112 + stqa $8, regs_spill + 128 + stqa $9, regs_spill + 144 + stqa $10, regs_spill + 160 + stqa $11, regs_spill + 176 + stqa $12, regs_spill + 192 + stqa $13, regs_spill + 208 + stqa $14, regs_spill + 224 + stqa $15, regs_spill + 240 + + /* SPU Context Save, Step 8: Save the remaining 112 GPRs. */ + ila $3, regs_spill + 256 +save_regs: + lqr $4, save_reg_insts +save_reg_loop: + ai $4, $4, 4 + .balignl 16, 0x40200000 +save_reg_insts: /* must be quad-word aligned. */ + stqd $16, 0($3) + stqd $17, 16($3) + stqd $18, 32($3) + stqd $19, 48($3) + andi $5, $4, 0x7F + stqr $4, save_reg_insts + ai $3, $3, 64 + brnz $5, save_reg_loop + + /* Initialize the stack pointer to point to 16368 + * (16kb-16). The back chain pointer is initialized + * to NULL. + */ + il $0, 0 + il $SP, 16368 + stqd $0, 0($SP) + + /* Allocate a minimum stack frame for the called main. + * This is needed so that main has a place to save the + * link register when it calls another function. + */ + stqd $SP, -160($SP) + ai $SP, $SP, -160 + + /* Call the program's main function. */ + brsl $0, main + + /* In this case main should not return; if it does + * there has been an error in the sequence. Execute + * stop-and-signal with code=0. + */ +.global exit +.global _exit +exit: +_exit: + stop 0x0 + + /* Pad the size of this crt0.o to be multiple of 16 bytes. */ +.balignl 16, 0x0 + diff --git a/arch/powerpc/platforms/cell/spufs/spu_utils.h b/arch/powerpc/platforms/cell/spufs/spu_utils.h new file mode 100644 index 000000000000..58359feb6c95 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/spu_utils.h @@ -0,0 +1,160 @@ +/* + * utils.h: Utilities for SPU-side of the context switch operation. + * + * (C) Copyright IBM 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPU_CONTEXT_UTILS_H_ +#define _SPU_CONTEXT_UTILS_H_ + +/* + * 64-bit safe EA. + */ +typedef union { + unsigned long long ull; + unsigned int ui[2]; +} addr64; + +/* + * 128-bit register template. + */ +typedef union { + unsigned int slot[4]; + vector unsigned int v; +} spu_reg128v; + +/* + * DMA list structure. + */ +struct dma_list_elem { + unsigned int size; + unsigned int ea_low; +}; + +/* + * Declare storage for 8-byte aligned DMA list. + */ +struct dma_list_elem dma_list[15] __attribute__ ((aligned(8))); + +/* + * External definition for storage + * declared in crt0. + */ +extern spu_reg128v regs_spill[NR_SPU_SPILL_REGS]; + +/* + * Compute LSCSA byte offset for a given field. + */ +static struct spu_lscsa *dummy = (struct spu_lscsa *)0; +#define LSCSA_BYTE_OFFSET(_field) \ + ((char *)(&(dummy->_field)) - (char *)(&(dummy->gprs[0].slot[0]))) +#define LSCSA_QW_OFFSET(_field) (LSCSA_BYTE_OFFSET(_field) >> 4) + +static inline void set_event_mask(void) +{ + unsigned int event_mask = 0; + + /* Save, Step 4: + * Restore, Step 1: + * Set the SPU_RdEventMsk channel to zero to mask + * all events. + */ + spu_writech(SPU_WrEventMask, event_mask); +} + +static inline void set_tag_mask(void) +{ + unsigned int tag_mask = 1; + + /* Save, Step 5: + * Restore, Step 2: + * Set the SPU_WrTagMsk channel to '01' to unmask + * only tag group 0. + */ + spu_writech(MFC_WrTagMask, tag_mask); +} + +static inline void build_dma_list(addr64 lscsa_ea) +{ + unsigned int ea_low; + int i; + + /* Save, Step 6: + * Restore, Step 3: + * Update the effective address for the CSA in the + * pre-canned DMA-list in local storage. + */ + ea_low = lscsa_ea.ui[1]; + ea_low += LSCSA_BYTE_OFFSET(ls[16384]); + + for (i = 0; i < 15; i++, ea_low += 16384) { + dma_list[i].size = 16384; + dma_list[i].ea_low = ea_low; + } +} + +static inline void enqueue_putllc(addr64 lscsa_ea) +{ + unsigned int ls = 0; + unsigned int size = 128; + unsigned int tag_id = 0; + unsigned int cmd = 0xB4; /* PUTLLC */ + + /* Save, Step 12: + * Restore, Step 7: + * Send a PUTLLC (tag 0) command to the MFC using + * an effective address in the CSA in order to + * remove any possible lock-line reservation. + */ + spu_writech(MFC_LSA, ls); + spu_writech(MFC_EAH, lscsa_ea.ui[0]); + spu_writech(MFC_EAL, lscsa_ea.ui[1]); + spu_writech(MFC_Size, size); + spu_writech(MFC_TagID, tag_id); + spu_writech(MFC_Cmd, cmd); +} + +static inline void set_tag_update(void) +{ + unsigned int update_any = 1; + + /* Save, Step 15: + * Restore, Step 8: + * Write the MFC_TagUpdate channel with '01'. + */ + spu_writech(MFC_WrTagUpdate, update_any); +} + +static inline void read_tag_status(void) +{ + /* Save, Step 16: + * Restore, Step 9: + * Read the MFC_TagStat channel data. + */ + spu_readch(MFC_RdTagStat); +} + +static inline void read_llar_status(void) +{ + /* Save, Step 17: + * Restore, Step 10: + * Read the MFC_AtomicStat channel data. + */ + spu_readch(MFC_RdAtomicStat); +} + +#endif /* _SPU_CONTEXT_UTILS_H_ */ |
