diff options
Diffstat (limited to 'arch/mn10300/kernel/head.S')
| -rw-r--r-- | arch/mn10300/kernel/head.S | 442 |
1 files changed, 0 insertions, 442 deletions
diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S deleted file mode 100644 index 0b15f759e0d2..000000000000 --- a/arch/mn10300/kernel/head.S +++ /dev/null @@ -1,442 +0,0 @@ -/* Boot entry point for MN10300 kernel - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/linkage.h> -#include <linux/serial_reg.h> -#include <asm/thread_info.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/frame.inc> -#include <asm/param.h> -#include <unit/serial.h> -#ifdef CONFIG_SMP -#include <asm/smp.h> -#include <asm/intctl-regs.h> -#include <asm/cpu-regs.h> -#include <proc/smp-regs.h> -#endif /* CONFIG_SMP */ - - __HEAD - -############################################################################### -# -# bootloader entry point -# -############################################################################### - .globl _start - .type _start,@function -_start: -#ifdef CONFIG_SMP - # - # If this is a secondary CPU (AP), then deal with that elsewhere - # - mov (CPUID),d3 - and CPUID_MASK,d3 - bne startup_secondary - - # - # We're dealing with the primary CPU (BP) here, then. - # Keep BP's D0,D1,D2 register for boot check. - # - - # Set up the Boot IPI for each secondary CPU - mov 0x1,a0 -loop_set_secondary_icr: - mov a0,a1 - asl CROSS_ICR_CPU_SHIFT,a1 - add CROSS_GxICR(SMP_BOOT_IRQ,0),a1 - movhu (a1),d3 - or GxICR_ENABLE|GxICR_LEVEL_0,d3 - movhu d3,(a1) - movhu (a1),d3 # flush - inc a0 - cmp NR_CPUS,a0 - bne loop_set_secondary_icr -#endif /* CONFIG_SMP */ - - # save commandline pointer - mov d0,a3 - - # preload the PGD pointer register - mov swapper_pg_dir,d0 - mov d0,(PTBR) - clr d0 - movbu d0,(PIDR) - - # turn on the TLBs - mov MMUCTR_IIV|MMUCTR_DIV,d0 - mov d0,(MMUCTR) -#ifdef CONFIG_AM34_2 - mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 -#else - mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 -#endif - mov d0,(MMUCTR) - - # turn on AM33v2 exception handling mode and set the trap table base - movhu (CPUP),d0 - or CPUP_EXM_AM33V2,d0 - movhu d0,(CPUP) - mov CONFIG_INTERRUPT_VECTOR_BASE,d0 - mov d0,(TBR) - - # invalidate and enable both of the caches -#ifdef CONFIG_SMP - mov ECHCTR,a0 - clr d0 - mov d0,(a0) -#endif - mov CHCTR,a0 - clr d0 - movhu d0,(a0) # turn off first - mov CHCTR_ICINV|CHCTR_DCINV,d0 - movhu d0,(a0) - setlb - mov (a0),d0 - btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy - lne - -#ifdef CONFIG_MN10300_CACHE_ENABLED -#ifdef CONFIG_MN10300_CACHE_WBACK -#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 -#endif /* NOWRALLOC */ -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 -#endif /* WBACK */ - movhu d0,(a0) # enable -#endif /* ENABLED */ - - # turn on RTS on the debug serial port if applicable -#ifdef CONFIG_MN10300_UNIT_ASB2305 - bset UART_MCR_RTS,(ASB2305_DEBUG_MCR) -#endif - - # clear the BSS area - mov __bss_start,a0 - mov __bss_stop,a1 - clr d0 -bssclear: - cmp a1,a0 - bge bssclear_end - mov d0,(a0) - inc4 a0 - bra bssclear -bssclear_end: - - # retrieve the parameters (including command line) before we overwrite - # them - cmp 0xabadcafe,d1 - bne __no_parameters - -__copy_parameters: - mov redboot_command_line,a0 - mov a0,a1 - add COMMAND_LINE_SIZE,a1 -1: - movbu (a3),d0 - inc a3 - movbu d0,(a0) - inc a0 - cmp a1,a0 - blt 1b - - mov redboot_platform_name,a0 - mov a0,a1 - add COMMAND_LINE_SIZE,a1 - mov d2,a3 -1: - movbu (a3),d0 - inc a3 - movbu d0,(a0) - inc a0 - cmp a1,a0 - blt 1b - -__no_parameters: - - # set up the registers with recognisable rubbish in them - mov init_thread_union+THREAD_SIZE-12,sp - - mov 0xea01eaea,d0 - mov d0,(4,sp) # EPSW save area - mov 0xea02eaea,d0 - mov d0,(8,sp) # PC save area - - mov 0xeb0060ed,d0 - mov d0,mdr - mov 0xeb0061ed,d0 - mov d0,mdrq - mov 0xeb0062ed,d0 - mov d0,mcrh - mov 0xeb0063ed,d0 - mov d0,mcrl - mov 0xeb0064ed,d0 - mov d0,mcvf - mov 0xed0065ed,a3 - mov a3,usp - - mov 0xed00e0ed,e0 - mov 0xed00e1ed,e1 - mov 0xed00e2ed,e2 - mov 0xed00e3ed,e3 - mov 0xed00e4ed,e4 - mov 0xed00e5ed,e5 - mov 0xed00e6ed,e6 - mov 0xed00e7ed,e7 - - mov 0xed00d0ed,d0 - mov 0xed00d1ed,d1 - mov 0xed00d2ed,d2 - mov 0xed00d3ed,d3 - mov 0xed00a0ed,a0 - mov 0xed00a1ed,a1 - mov 0xed00a2ed,a2 - mov 0,a3 - - # set up the initial kernel stack - SAVE_ALL - mov 0xffffffff,d0 - mov d0,(REG_ORIG_D0,fp) - - # put different recognisable rubbish in the regs - mov 0xfb0060ed,d0 - mov d0,mdr - mov 0xfb0061ed,d0 - mov d0,mdrq - mov 0xfb0062ed,d0 - mov d0,mcrh - mov 0xfb0063ed,d0 - mov d0,mcrl - mov 0xfb0064ed,d0 - mov d0,mcvf - mov 0xfd0065ed,a0 - mov a0,usp - - mov 0xfd00e0ed,e0 - mov 0xfd00e1ed,e1 - mov 0xfd00e2ed,e2 - mov 0xfd00e3ed,e3 - mov 0xfd00e4ed,e4 - mov 0xfd00e5ed,e5 - mov 0xfd00e6ed,e6 - mov 0xfd00e7ed,e7 - - mov 0xfd00d0ed,d0 - mov 0xfd00d1ed,d1 - mov 0xfd00d2ed,d2 - mov 0xfd00d3ed,d3 - mov 0xfd00a0ed,a0 - mov 0xfd00a1ed,a1 - mov 0xfd00a2ed,a2 - - # we may be holding current in E2 -#ifdef CONFIG_MN10300_CURRENT_IN_E2 - mov init_task,e2 -#endif - - # initialise the processor and the unit - call processor_init[],0 - call unit_init[],0 - -#ifdef CONFIG_SMP - # mark the primary CPU in cpu_boot_map - mov cpu_boot_map,a0 - mov 0x1,d0 - mov d0,(a0) - - # signal each secondary CPU to begin booting - mov 0x1,d2 # CPU ID - -loop_request_boot_secondary: - mov d2,a0 - # send SMP_BOOT_IPI to secondary CPU - asl CROSS_ICR_CPU_SHIFT,a0 - add CROSS_GxICR(SMP_BOOT_IRQ,0),a0 - movhu (a0),d0 - or GxICR_REQUEST|GxICR_DETECT,d0 - movhu d0,(a0) - movhu (a0),d0 # flush - - # wait up to 100ms for AP's IPI to be received - clr d3 -wait_on_secondary_boot: - mov DELAY_TIME_BOOT_IPI,d0 - call __delay[],0 - inc d3 - mov cpu_boot_map,a0 - mov (a0),d0 - lsr d2,d0 - btst 0x1,d0 - bne 1f - cmp TIME_OUT_COUNT_BOOT_IPI,d3 - bne wait_on_secondary_boot -1: - inc d2 - cmp NR_CPUS,d2 - bne loop_request_boot_secondary -#endif /* CONFIG_SMP */ - -#ifdef CONFIG_GDBSTUB - call gdbstub_init[],0 - -#ifdef CONFIG_GDBSTUB_IMMEDIATE - .globl __gdbstub_pause -__gdbstub_pause: - bra __gdbstub_pause -#endif -#endif - - jmp start_kernel - .size _start,.-_start - -############################################################################### -# -# Secondary CPU boot point -# -############################################################################### -#ifdef CONFIG_SMP -startup_secondary: - # preload the PGD pointer register - mov swapper_pg_dir,d0 - mov d0,(PTBR) - clr d0 - movbu d0,(PIDR) - - # turn on the TLBs - mov MMUCTR_IIV|MMUCTR_DIV,d0 - mov d0,(MMUCTR) -#ifdef CONFIG_AM34_2 - mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0 -#else - mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0 -#endif - mov d0,(MMUCTR) - - # turn on AM33v2 exception handling mode and set the trap table base - movhu (CPUP),d0 - or CPUP_EXM_AM33V2,d0 - movhu d0,(CPUP) - - # set the interrupt vector table - mov CONFIG_INTERRUPT_VECTOR_BASE,d0 - mov d0,(TBR) - - # invalidate and enable both of the caches - mov ECHCTR,a0 - clr d0 - mov d0,(a0) - mov CHCTR,a0 - clr d0 - movhu d0,(a0) # turn off first - mov CHCTR_ICINV|CHCTR_DCINV,d0 - movhu d0,(a0) - setlb - mov (a0),d0 - btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) - lne - -#ifdef CONFIG_MN10300_CACHE_ENABLED -#ifdef CONFIG_MN10300_CACHE_WBACK -#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0 -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0 -#endif /* !NOWRALLOC */ -#else - mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0 -#endif /* WBACK */ - movhu d0,(a0) # enable -#endif /* ENABLED */ - - # Clear the boot IPI interrupt for this CPU - movhu (GxICR(SMP_BOOT_IRQ)),d0 - and ~GxICR_REQUEST,d0 - movhu d0,(GxICR(SMP_BOOT_IRQ)) - movhu (GxICR(SMP_BOOT_IRQ)),d0 # flush - - /* get stack */ - mov CONFIG_INTERRUPT_VECTOR_BASE + CONFIG_BOOT_STACK_OFFSET,a0 - mov (CPUID),d0 - and CPUID_MASK,d0 - mulu CONFIG_BOOT_STACK_SIZE,d0 - sub d0,a0 - mov a0,sp - - # init interrupt for AP - call smp_prepare_cpu_init[],0 - - # mark this secondary CPU in cpu_boot_map - mov (CPUID),d0 - mov 0x1,d1 - asl d0,d1 - mov cpu_boot_map,a0 - bset d1,(a0) - - or EPSW_IE|EPSW_IM_1,epsw # permit level 0 interrupts - nop - nop -#ifdef CONFIG_MN10300_CACHE_WBACK - # flush the local cache if it's in writeback mode - call mn10300_local_dcache_flush_inv[],0 - setlb - mov (CHCTR),d0 - btst CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer) - lne -#endif - - # now sleep waiting for further instructions -secondary_sleep: - mov CPUM_SLEEP,d0 - movhu d0,(CPUM) - nop - nop - bra secondary_sleep - .size startup_secondary,.-startup_secondary -#endif /* CONFIG_SMP */ - -############################################################################### -# -# -# -############################################################################### -ENTRY(__head_end) - -/* - * This is initialized to disallow all access to the low 2G region - * - the high 2G region is managed directly by the MMU - * - range 0x70000000-0x7C000000 are initialised for use by VMALLOC - */ - .section .bss - .balign PAGE_SIZE -ENTRY(swapper_pg_dir) - .space PTRS_PER_PGD*4 - -/* - * The page tables are initialized to only 8MB here - the final page - * tables are set up later depending on memory size. - */ - - .balign PAGE_SIZE -ENTRY(empty_zero_page) - .space PAGE_SIZE - - .balign PAGE_SIZE -ENTRY(large_page_table) - .space PAGE_SIZE - - .balign PAGE_SIZE -ENTRY(kernel_vmalloc_ptes) - .space ((VMALLOC_END-VMALLOC_START)/PAGE_SIZE)*4 |
