summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx/mach-vpr200.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx/mach-vpr200.c')
-rw-r--r--arch/arm/mach-imx/mach-vpr200.c322
1 files changed, 322 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
new file mode 100644
index 000000000000..d74e3473d236
--- /dev/null
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -0,0 +1,322 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
+ * Copyright 2010 Creative Product Design
+ *
+ * Derived from mx35 3stack.
+ * Original author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/mfd/mc13xxx.h>
+
+#include "devices-imx35.h"
+
+#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
+#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
+
+#define GPIO_BUTTON1 IMX_GPIO_NR(1, 4)
+#define GPIO_BUTTON2 IMX_GPIO_NR(1, 5)
+#define GPIO_BUTTON3 IMX_GPIO_NR(1, 7)
+#define GPIO_BUTTON4 IMX_GPIO_NR(1, 8)
+#define GPIO_BUTTON5 IMX_GPIO_NR(1, 9)
+#define GPIO_BUTTON6 IMX_GPIO_NR(1, 10)
+#define GPIO_BUTTON7 IMX_GPIO_NR(1, 11)
+#define GPIO_BUTTON8 IMX_GPIO_NR(1, 12)
+
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 800x480 @ 60 Hz */
+ .name = "PT0708048",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = KHZ2PICOS(33260),
+ .left_margin = 50,
+ .right_margin = 156,
+ .upper_margin = 10,
+ .lower_margin = 10,
+ .hsync_len = 1, /* note: DE only display */
+ .vsync_len = 1, /* note: DE only display */
+ .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 800x480 @ 60 Hz */
+ .name = "CTP-CLAA070LC0ACW",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = KHZ2PICOS(27000),
+ .left_margin = 50,
+ .right_margin = 50, /* whole line should have 900 clocks */
+ .upper_margin = 10,
+ .lower_margin = 10, /* whole frame should have 500 lines */
+ .hsync_len = 1, /* note: DE only display */
+ .vsync_len = 1, /* note: DE only display */
+ .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }
+};
+
+static const struct ipu_platform_data mx3_ipu_data __initconst = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata __initdata = {
+ .name = "PT0708048",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data vpr200_flash_data = {
+ .width = 2,
+};
+
+static struct resource vpr200_flash_resource = {
+ .start = MX35_CS0_BASE_ADDR,
+ .end = MX35_CS0_BASE_ADDR + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device vpr200_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &vpr200_flash_data,
+ },
+ .resource = &vpr200_flash_resource,
+ .num_resources = 1,
+};
+
+static const struct mxc_nand_platform_data
+ vpr200_nand_board_info __initconst = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
+#define VPR_KEY_DEBOUNCE 500
+static struct gpio_keys_button vpr200_gpio_keys_table[] = {
+ {KEY_F2, GPIO_BUTTON1, 1, "vpr-keys: F2", 0, VPR_KEY_DEBOUNCE},
+ {KEY_F3, GPIO_BUTTON2, 1, "vpr-keys: F3", 0, VPR_KEY_DEBOUNCE},
+ {KEY_F4, GPIO_BUTTON3, 1, "vpr-keys: F4", 0, VPR_KEY_DEBOUNCE},
+ {KEY_F5, GPIO_BUTTON4, 1, "vpr-keys: F5", 0, VPR_KEY_DEBOUNCE},
+ {KEY_F6, GPIO_BUTTON5, 1, "vpr-keys: F6", 0, VPR_KEY_DEBOUNCE},
+ {KEY_F7, GPIO_BUTTON6, 1, "vpr-keys: F7", 0, VPR_KEY_DEBOUNCE},
+ {KEY_F8, GPIO_BUTTON7, 1, "vpr-keys: F8", 1, VPR_KEY_DEBOUNCE},
+ {KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
+};
+
+static const struct gpio_keys_platform_data
+ vpr200_gpio_keys_data __initconst = {
+ .buttons = vpr200_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
+};
+
+static struct mc13xxx_platform_data vpr200_pmic = {
+ .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
+};
+
+static const struct imxi2c_platform_data vpr200_i2c0_data __initconst = {
+ .bitrate = 50000,
+};
+
+static struct at24_platform_data vpr200_eeprom = {
+ .byte_len = 2048 / 8,
+ .page_size = 1,
+};
+
+static struct i2c_board_info vpr200_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x50), /* E0=0, E1=0, E2=0 */
+ .platform_data = &vpr200_eeprom,
+ }, {
+ I2C_BOARD_INFO("mc13892", 0x08),
+ .platform_data = &vpr200_pmic,
+ .irq = gpio_to_irq(GPIO_PMIC_INT),
+ }
+};
+
+static iomux_v3_cfg_t vpr200_pads[] = {
+ /* UART1 */
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* UART3 */
+ MX35_PAD_ATA_DATA10__UART3_RXD_MUX,
+ MX35_PAD_ATA_DATA11__UART3_TXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ /* Display */
+ MX35_PAD_LD0__IPU_DISPB_DAT_0,
+ MX35_PAD_LD1__IPU_DISPB_DAT_1,
+ MX35_PAD_LD2__IPU_DISPB_DAT_2,
+ MX35_PAD_LD3__IPU_DISPB_DAT_3,
+ MX35_PAD_LD4__IPU_DISPB_DAT_4,
+ MX35_PAD_LD5__IPU_DISPB_DAT_5,
+ MX35_PAD_LD6__IPU_DISPB_DAT_6,
+ MX35_PAD_LD7__IPU_DISPB_DAT_7,
+ MX35_PAD_LD8__IPU_DISPB_DAT_8,
+ MX35_PAD_LD9__IPU_DISPB_DAT_9,
+ MX35_PAD_LD10__IPU_DISPB_DAT_10,
+ MX35_PAD_LD11__IPU_DISPB_DAT_11,
+ MX35_PAD_LD12__IPU_DISPB_DAT_12,
+ MX35_PAD_LD13__IPU_DISPB_DAT_13,
+ MX35_PAD_LD14__IPU_DISPB_DAT_14,
+ MX35_PAD_LD15__IPU_DISPB_DAT_15,
+ MX35_PAD_LD16__IPU_DISPB_DAT_16,
+ MX35_PAD_LD17__IPU_DISPB_DAT_17,
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+ /* LCD Enable */
+ MX35_PAD_D3_VSYNC__GPIO1_2,
+ /* USBOTG */
+ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+ MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+ /* SDCARD */
+ MX35_PAD_SD1_CMD__ESDHC1_CMD,
+ MX35_PAD_SD1_CLK__ESDHC1_CLK,
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+ /* PMIC */
+ MX35_PAD_GPIO2_0__GPIO2_0,
+ /* GPIO keys */
+ MX35_PAD_SCKR__GPIO1_4,
+ MX35_PAD_COMPARE__GPIO1_5,
+ MX35_PAD_SCKT__GPIO1_7,
+ MX35_PAD_FST__GPIO1_8,
+ MX35_PAD_HCKT__GPIO1_9,
+ MX35_PAD_TX5_RX0__GPIO1_10,
+ MX35_PAD_TX4_RX1__GPIO1_11,
+ MX35_PAD_TX3_RX2__GPIO1_12,
+};
+
+/* USB Device config */
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI,
+ .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
+};
+
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+ return mx35_initialize_usb_hw(pdev->id,
+ MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
+/* USB HOST config */
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
+ .init = vpr200_usbh_init,
+ .portsc = MXC_EHCI_MODE_SERIAL,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &vpr200_flash,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init vpr200_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads));
+
+ imx35_add_fec(NULL);
+ imx35_add_imx2_wdt(NULL);
+ imx_add_gpio_keys(&vpr200_gpio_keys_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ if (0 != gpio_request(GPIO_LCDPWR, "LCDPWR"))
+ printk(KERN_WARNING "vpr200: Couldn't get LCDPWR gpio\n");
+ else
+ gpio_direction_output(GPIO_LCDPWR, 0);
+
+ if (0 != gpio_request(GPIO_PMIC_INT, "PMIC_INT"))
+ printk(KERN_WARNING "vpr200: Couldn't get PMIC_INT gpio\n");
+ else
+ gpio_direction_input(GPIO_PMIC_INT);
+
+ imx35_add_imx_uart0(NULL);
+ imx35_add_imx_uart2(NULL);
+
+ imx35_add_ipu_core(&mx3_ipu_data);
+ imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+ imx35_add_fsl_usb2_udc(&otg_device_pdata);
+ imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+ imx35_add_mxc_nand(&vpr200_nand_board_info);
+ imx35_add_sdhci_esdhc_imx(0, NULL);
+
+ i2c_register_board_info(0, vpr200_i2c_devices,
+ ARRAY_SIZE(vpr200_i2c_devices));
+
+ imx35_add_imx_i2c0(&vpr200_i2c0_data);
+}
+
+static void __init vpr200_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer vpr200_timer = {
+ .init = vpr200_timer_init,
+};
+
+MACHINE_START(VPR200, "VPR200")
+ /* Maintainer: Creative Product Design */
+ .map_io = mx35_map_io,
+ .init_early = imx35_init_early,
+ .init_irq = mx35_init_irq,
+ .timer = &vpr200_timer,
+ .init_machine = vpr200_board_init,
+MACHINE_END
OpenPOWER on IntegriCloud