summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-imx/Kconfig')
-rw-r--r--arch/arm/mach-imx/Kconfig90
1 files changed, 87 insertions, 3 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8d276584650e..f1bf610e2900 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,3 +1,70 @@
+config ARCH_MXC
+ bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
+menu "Freescale i.MX support"
+ depends on ARCH_MXC
+
+config MXC_IRQ_PRIOR
+ bool "Use IRQ priority"
+ help
+ Select this if you want to use prioritized IRQ handling.
+ This feature prevents higher priority ISR to be interrupted
+ by lower priority IRQ even IRQF_DISABLED flag is not set.
+ This may be useful in embedded applications, where are strong
+ requirements for timing.
+ Say N here, unless you have a specialized requirement.
+
+config MXC_TZIC
+ bool
+
+config MXC_AVIC
+ bool
+
+config MXC_DEBUG_BOARD
+ bool "Enable MXC debug board(for 3-stack)"
+ help
+ The debug board is an integral part of the MXC 3-stack(PDK)
+ platforms, it can be attached or removed from the peripheral
+ board. On debug board, several debug devices(ethernet, UART,
+ buttons, LEDs and JTAG) are implemented. Between the MCU and
+ these devices, a CPLD is added as a bridge which performs
+ data/address de-multiplexing and decode, signal level shift,
+ interrupt control and various board functions.
+
+config HAVE_EPIT
+ bool
+
+config MXC_USE_EPIT
+ bool "Use EPIT instead of GPT"
+ depends on HAVE_EPIT
+ help
+ Use EPIT as the system timer on systems that have it. Normally you
+ don't have a reason to do so as the EPIT has the same features and
+ uses the same clocks as the GPT. Anyway, on some systems the GPT
+ may be in use for other purposes.
+
+config MXC_ULPI
+ bool
+
+config ARCH_HAS_RNGA
+ bool
+
+config IRAM_ALLOC
+ bool
+ select GENERIC_ALLOCATOR
+
config HAVE_IMX_GPC
bool
@@ -5,6 +72,12 @@ config HAVE_IMX_MMDC
bool
config HAVE_IMX_SRC
+ def_bool y if SMP
+
+config IMX_HAVE_IOMUX_V1
+ bool
+
+config ARCH_MXC_IOMUX_V3
bool
config ARCH_MX1
@@ -104,7 +177,7 @@ config SOC_IMX51
select PINCTRL_IMX51
select SOC_IMX5
-if ARCH_IMX_V4_V5
+if ARCH_MULTI_V4T
comment "MX1 platforms:"
config MACH_MXLADS
@@ -133,6 +206,10 @@ config MACH_APF9328
help
Say Yes here if you are using the Armadeus APF9328 development board
+endif
+
+if ARCH_MULTI_V5
+
comment "MX21 platforms:"
config MACH_MX21ADS
@@ -384,7 +461,7 @@ config MACH_IMX27_DT
endif
-if ARCH_IMX_V6_V7
+if ARCH_MULTI_V6
comment "MX31 platforms:"
@@ -649,6 +726,10 @@ config MACH_VPR200
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
+endif
+
+if ARCH_MULTI_V7
+
comment "i.MX5 platforms:"
config MACH_MX50_RDP
@@ -756,7 +837,6 @@ config SOC_IMX6Q
select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
- select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select PINCTRL
@@ -766,3 +846,7 @@ config SOC_IMX6Q
This enables support for Freescale i.MX6 Quad processor.
endif
+
+source "arch/arm/mach-imx/devices/Kconfig"
+
+endmenu
OpenPOWER on IntegriCloud