diff options
Diffstat (limited to 'Documentation/input/xpad.txt')
| -rw-r--r-- | Documentation/input/xpad.txt | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/Documentation/input/xpad.txt b/Documentation/input/xpad.txt new file mode 100644 index 000000000000..b9111a703ce0 --- /dev/null +++ b/Documentation/input/xpad.txt @@ -0,0 +1,116 @@ +xpad - Linux USB driver for X-Box gamepads + +This is the very first release of a driver for X-Box gamepads. +Basically, this was hacked away in just a few hours, so don't expect +miracles. +In particular, there is currently NO support for the rumble pack. +You won't find many ff-aware linux applications anyway. + + +0. Status +--------- + +For now, this driver has only been tested on just one Linux-Box. +This one is running a 2.4.18 kernel with usb-uhci on an amd athlon 600. + +The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) reports +8 axes and 10 buttons. + +Alls 8 axes work, though they all have the same range (-32768..32767) +and the zero-setting is not correct for the triggers (I don't know if that +is some limitation of jstest, since the input device setup should be fine. I +didn't have a look at jstest itself yet). + +All of the 10 buttons work (in digital mode). The six buttons on the +right side (A, B, X, Y, black, white) are said to be "analog" and +report their values as 8 bit unsigned, not sure what this is good for. + +I tested the controller with quake3, and configuration and +in game functionality were OK. However, I find it rather difficult to +play first person shooters with a pad. Your mileage may vary. + + +1. USB adapter +-------------- + +Before you can actually use the driver, you need to get yourself an +adapter cable to connect the X-Box controller to your Linux-Box. + +Such a cable is pretty easy to build. The Controller itself is a USB compound +device (a hub with three ports for two expansion slots and the controller +device) with the only difference in a nonstandard connector (5 pins vs. 4 on +standard USB connector). + +You just need to solder a USB connector onto the cable and keep the +yellow wire unconnected. The other pins have the same order on both +connectors so there is no magic to it. Detailed info on these matters +can be found on the net ([1], [2], [3]). + +Thanks to the trip splitter found on the cable you don't even need to cut the +original one. You can buy an extension cable and cut that instead. That way, +you can still use the controller with your X-Box, if you have one ;) + + +2. driver installation +---------------------- + +Once you have the adapter cable and the controller is connected, you need +to load your USB subsystem and should cat /proc/bus/usb/devices. +There should be an entry like the one at the end [4]. + +Currently (as of version 0.0.4), the following three devices are included: + original Microsoft XBOX controller (US), vendor=0x045e, product=0x0202 + original Microsoft XBOX controller (Japan), vendor=0x045e, product=0x0285 + InterAct PowerPad Pro (Germany), vendor=0x05fd, product=0x107a + +If you have another controller that is not listed above and is not recognized +by the driver, please drop me a line with the appropriate info (that is, include +the name, vendor and product ID, as well as the country where you bought it; +sending the whole dump out of /proc/bus/usb/devices along would be even better). + +In theory, the driver should work with other controllers than mine +(InterAct PowerPad pro, bought in Germany) just fine, but I cannot test this +for I only have this one controller. + +If you compiled and installed the driver, test the functionality: +> modprobe xpad +> modprobe joydev +> jstest /dev/js0 + +There should be a single line showing 18 inputs (8 axes, 10 buttons), and +it's values should change if you move the sticks and push the buttons. + +It works? Voila, your done ;) + + +3. Thanks +--------- + +I have to thank ITO Takayuki for the detailed info on his site + http://euc.jp/periphs/xbox-controller.ja.html. + +His useful info and both the usb-skeleton as well as the iforce input driver +(Greg Kroah-Hartmann; Vojtech Pavlik) helped a lot in rapid prototyping +the basic functionality. + + +4. References +------------- + +1. http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki) +2. http://xpad.xbox-scene.com/ +3. http://www.xboxhackz.com/Hackz-Reference.htm + +4. /proc/bus/usb/devices - dump from InterAct PowerPad Pro (Germany): + +T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 +D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=32 #Cfgs= 1 +P: Vendor=05fd ProdID=107a Rev= 1.00 +C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA +I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none) +E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl= 10ms +E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl= 10ms + +-- +Marko Friedemann <mfr@bmx-chemnitz.de> +2002-07-16 |
