summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt')
-rw-r--r--Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt46
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
new file mode 100644
index 000000000000..330a45b5f0b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -0,0 +1,46 @@
+* Axis ARTPEC-6 PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie"
+- reg: base addresses and lengths of the PCIe controller (DBI),
+ the phy controller, and configuration address space.
+- reg-names: Must include the following entries:
+ - "dbi"
+ - "phy"
+ - "config"
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+ - "msi": The interrupt that is asserted when an MSI is received
+- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
+ used to enable and control the Synopsys IP.
+
+Example:
+
+ pcie@f8050000 {
+ compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+ reg = <0xf8050000 0x2000
+ 0xf8040000 0x1000
+ 0xc0000000 0x1000>;
+ reg-names = "dbi", "phy", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ /* downstream I/O */
+ ranges = <0x81000000 0 0x00010000 0xc0010000 0 0x00010000
+ /* non-prefetchable memory */
+ 0x82000000 0 0xc0020000 0xc0020000 0 0x1ffe0000>;
+ num-lanes = <2>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ axis,syscon-pcie = <&syscon>;
+ };
OpenPOWER on IntegriCloud