diff options
| -rw-r--r-- | drivers/hwmon/it87.c | 663 |
1 files changed, 327 insertions, 336 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index f877cc98b2fd..4b38ecb91959 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -603,23 +603,160 @@ static const unsigned int pwm_freq[8] = { 750000, }; -static int it87_probe(struct platform_device *pdev); -static int it87_remove(struct platform_device *pdev); +/* + * Must be called with data->update_lock held, except during initialization. + * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, + * would slow down the IT87 access and should not be necessary. + */ +static int it87_read_value(struct it87_data *data, u8 reg) +{ + outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET); + return inb_p(data->addr + IT87_DATA_REG_OFFSET); +} -static int it87_read_value(struct it87_data *data, u8 reg); -static void it87_write_value(struct it87_data *data, u8 reg, u8 value); -static struct it87_data *it87_update_device(struct device *dev); -static int it87_check_pwm(struct device *dev); -static void it87_init_device(struct platform_device *pdev); +/* + * Must be called with data->update_lock held, except during initialization. + * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, + * would slow down the IT87 access and should not be necessary. + */ +static void it87_write_value(struct it87_data *data, u8 reg, u8 value) +{ + outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET); + outb_p(value, data->addr + IT87_DATA_REG_OFFSET); +} +static void it87_update_pwm_ctrl(struct it87_data *data, int nr) +{ + data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM[nr]); + if (has_newer_autopwm(data)) { + data->pwm_temp_map[nr] = (data->pwm_ctrl[nr] & 0x03) + + nr < 3 ? 0 : 3; + data->pwm_duty[nr] = it87_read_value(data, + IT87_REG_PWM_DUTY[nr]); + } else { + if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */ + data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03; + else /* Manual mode */ + data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f; + } -static struct platform_driver it87_driver = { - .driver = { - .name = DRVNAME, - }, - .probe = it87_probe, - .remove = it87_remove, -}; + if (has_old_autopwm(data)) { + int i; + + for (i = 0; i < 5 ; i++) + data->auto_temp[nr][i] = it87_read_value(data, + IT87_REG_AUTO_TEMP(nr, i)); + for (i = 0; i < 3 ; i++) + data->auto_pwm[nr][i] = it87_read_value(data, + IT87_REG_AUTO_PWM(nr, i)); + } +} + +static struct it87_data *it87_update_device(struct device *dev) +{ + struct it87_data *data = dev_get_drvdata(dev); + int i; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + if (update_vbat) { + /* + * Cleared after each update, so reenable. Value + * returned by this read will be previous value + */ + it87_write_value(data, IT87_REG_CONFIG, + it87_read_value(data, IT87_REG_CONFIG) | 0x40); + } + for (i = 0; i <= 7; i++) { + data->in[i][0] = + it87_read_value(data, IT87_REG_VIN(i)); + data->in[i][1] = + it87_read_value(data, IT87_REG_VIN_MIN(i)); + data->in[i][2] = + it87_read_value(data, IT87_REG_VIN_MAX(i)); + } + /* in8 (battery) has no limit registers */ + data->in[8][0] = it87_read_value(data, IT87_REG_VIN(8)); + if (has_avcc3(data)) + data->in[9][0] = it87_read_value(data, IT87_REG_AVCC3); + + for (i = 0; i < 6; i++) { + /* Skip disabled fans */ + if (!(data->has_fan & (1 << i))) + continue; + + data->fan[i][1] = + it87_read_value(data, IT87_REG_FAN_MIN[i]); + data->fan[i][0] = it87_read_value(data, + IT87_REG_FAN[i]); + /* Add high byte if in 16-bit mode */ + if (has_16bit_fans(data)) { + data->fan[i][0] |= it87_read_value(data, + IT87_REG_FANX[i]) << 8; + data->fan[i][1] |= it87_read_value(data, + IT87_REG_FANX_MIN[i]) << 8; + } + } + for (i = 0; i < 3; i++) { + if (!(data->has_temp & (1 << i))) + continue; + data->temp[i][0] = + it87_read_value(data, IT87_REG_TEMP(i)); + data->temp[i][1] = + it87_read_value(data, IT87_REG_TEMP_LOW(i)); + data->temp[i][2] = + it87_read_value(data, IT87_REG_TEMP_HIGH(i)); + if (has_temp_offset(data)) + data->temp[i][3] = + it87_read_value(data, + IT87_REG_TEMP_OFFSET[i]); + } + + /* Newer chips don't have clock dividers */ + if ((data->has_fan & 0x07) && !has_16bit_fans(data)) { + i = it87_read_value(data, IT87_REG_FAN_DIV); + data->fan_div[0] = i & 0x07; + data->fan_div[1] = (i >> 3) & 0x07; + data->fan_div[2] = (i & 0x40) ? 3 : 1; + } + + data->alarms = + it87_read_value(data, IT87_REG_ALARM1) | + (it87_read_value(data, IT87_REG_ALARM2) << 8) | + (it87_read_value(data, IT87_REG_ALARM3) << 16); + data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE); + + data->fan_main_ctrl = it87_read_value(data, + IT87_REG_FAN_MAIN_CTRL); + data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL); + for (i = 0; i < 6; i++) + it87_update_pwm_ctrl(data, i); + + data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); + data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA); + /* + * The IT8705F does not have VID capability. + * The IT8718F and later don't use IT87_REG_VID for the + * same purpose. + */ + if (data->type == it8712 || data->type == it8716) { + data->vid = it87_read_value(data, IT87_REG_VID); + /* + * The older IT8712F revisions had only 5 VID pins, + * but we assume it is always safe to read 6 bits. + */ + data->vid &= 0x3f; + } + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} static ssize_t show_in(struct device *dev, struct device_attribute *attr, char *buf) @@ -2341,6 +2478,175 @@ static void it87_remove_files(struct device *dev) sysfs_remove_group(&dev->kobj, &it87_group_label); } +/* Called when we have found a new IT87. */ +static void it87_init_device(struct platform_device *pdev) +{ + struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev); + struct it87_data *data = platform_get_drvdata(pdev); + int tmp, i; + u8 mask; + + /* + * For each PWM channel: + * - If it is in automatic mode, setting to manual mode should set + * the fan to full speed by default. + * - If it is in manual mode, we need a mapping to temperature + * channels to use when later setting to automatic mode later. + * Use a 1:1 mapping by default (we are clueless.) + * In both cases, the value can (and should) be changed by the user + * prior to switching to a different mode. + * Note that this is no longer needed for the IT8721F and later, as + * these have separate registers for the temperature mapping and the + * manual duty cycle. + */ + for (i = 0; i < 3; i++) { + data->pwm_temp_map[i] = i; + data->pwm_duty[i] = 0x7f; /* Full speed */ + data->auto_pwm[i][3] = 0x7f; /* Full speed, hard-coded */ + } + + /* + * Some chips seem to have default value 0xff for all limit + * registers. For low voltage limits it makes no sense and triggers + * alarms, so change to 0 instead. For high temperature limits, it + * means -1 degree C, which surprisingly doesn't trigger an alarm, + * but is still confusing, so change to 127 degrees C. + */ + for (i = 0; i < 8; i++) { + tmp = it87_read_value(data, IT87_REG_VIN_MIN(i)); + if (tmp == 0xff) + it87_write_value(data, IT87_REG_VIN_MIN(i), 0); + } + for (i = 0; i < 3; i++) { + tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i)); + if (tmp == 0xff) + it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127); + } + + /* + * Temperature channels are not forcibly enabled, as they can be + * set to two different sensor types and we can't guess which one + * is correct for a given system. These channels can be enabled at + * run-time through the temp{1-3}_type sysfs accessors if needed. + */ + + /* Check if voltage monitors are reset manually or by some reason */ + tmp = it87_read_value(data, IT87_REG_VIN_ENABLE); + if ((tmp & 0xff) == 0) { + /* Enable all voltage monitors */ + it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff); + } + + /* Check if tachometers are reset manually or by some reason */ + mask = 0x70 & ~(sio_data->skip_fan << 4); + data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL); + if ((data->fan_main_ctrl & mask) == 0) { + /* Enable all fan tachometers */ + data->fan_main_ctrl |= mask; + it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, + data->fan_main_ctrl); + } + data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; + + tmp = it87_read_value(data, IT87_REG_FAN_16BIT); + + /* Set tachometers to 16-bit mode if needed */ + if (has_fan16_config(data)) { + if (~tmp & 0x07 & data->has_fan) { + dev_dbg(&pdev->dev, + "Setting fan1-3 to 16-bit mode\n"); + it87_write_value(data, IT87_REG_FAN_16BIT, + tmp | 0x07); + } + } + + /* Check for additional fans */ + if (has_five_fans(data)) { + if (tmp & (1 << 4)) + data->has_fan |= (1 << 3); /* fan4 enabled */ + if (tmp & (1 << 5)) + data->has_fan |= (1 << 4); /* fan5 enabled */ + if (has_six_fans(data) && (tmp & (1 << 2))) + data->has_fan |= (1 << 5); /* fan6 enabled */ + } + + /* Fan input pins may be used for alternative functions */ + data->has_fan &= ~sio_data->skip_fan; + + /* Check if pwm5, pwm6 are enabled */ + if (has_six_pwm(data)) { + /* The following code may be IT8620E specific */ + tmp = it87_read_value(data, IT87_REG_FAN_DIV); + if ((tmp & 0xc0) == 0xc0) + sio_data->skip_pwm |= (1 << 4); + if (!(tmp & (1 << 3))) + sio_data->skip_pwm |= (1 << 5); + } + + /* Start monitoring */ + it87_write_value(data, IT87_REG_CONFIG, + (it87_read_value(data, IT87_REG_CONFIG) & 0x3e) + | (update_vbat ? 0x41 : 0x01)); +} + +/* Return 1 if and only if the PWM interface is safe to use */ +static int it87_check_pwm(struct device *dev) +{ + struct it87_data *data = dev_get_drvdata(dev); + /* + * Some BIOSes fail to correctly configure the IT87 fans. All fans off + * and polarity set to active low is sign that this is the case so we + * disable pwm control to protect the user. + */ + int tmp = it87_read_value(data, IT87_REG_FAN_CTL); + + if ((tmp & 0x87) == 0) { + if (fix_pwm_polarity) { + /* + * The user asks us to attempt a chip reconfiguration. + * This means switching to active high polarity and + * inverting all fan speed values. + */ + int i; + u8 pwm[3]; + + for (i = 0; i < 3; i++) + pwm[i] = it87_read_value(data, + IT87_REG_PWM[i]); + + /* + * If any fan is in automatic pwm mode, the polarity + * might be correct, as suspicious as it seems, so we + * better don't change anything (but still disable the + * PWM interface). + */ + if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) { + dev_info(dev, + "Reconfiguring PWM to active high polarity\n"); + it87_write_value(data, IT87_REG_FAN_CTL, + tmp | 0x87); + for (i = 0; i < 3; i++) + it87_write_value(data, + IT87_REG_PWM[i], + 0x7f & ~pwm[i]); + return 1; + } + + dev_info(dev, + "PWM configuration is too broken to be fixed\n"); + } + + dev_info(dev, + "Detected broken BIOS defaults, disabling PWM interface\n"); + return 0; + } else if (fix_pwm_polarity) { + dev_info(dev, + "PWM configuration looks sane, won't touch\n"); + } + + return 1; +} + static int it87_probe(struct platform_device *pdev) { struct it87_data *data; @@ -2570,328 +2876,13 @@ static int it87_remove(struct platform_device *pdev) return 0; } -/* - * Must be called with data->update_lock held, except during initialization. - * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, - * would slow down the IT87 access and should not be necessary. - */ -static int it87_read_value(struct it87_data *data, u8 reg) -{ - outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET); - return inb_p(data->addr + IT87_DATA_REG_OFFSET); -} - -/* - * Must be called with data->update_lock held, except during initialization. - * We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, - * would slow down the IT87 access and should not be necessary. - */ -static void it87_write_value(struct it87_data *data, u8 reg, u8 value) -{ - outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET); - outb_p(value, data->addr + IT87_DATA_REG_OFFSET); -} - -/* Return 1 if and only if the PWM interface is safe to use */ -static int it87_check_pwm(struct device *dev) -{ - struct it87_data *data = dev_get_drvdata(dev); - /* - * Some BIOSes fail to correctly configure the IT87 fans. All fans off - * and polarity set to active low is sign that this is the case so we - * disable pwm control to protect the user. - */ - int tmp = it87_read_value(data, IT87_REG_FAN_CTL); - if ((tmp & 0x87) == 0) { - if (fix_pwm_polarity) { - /* - * The user asks us to attempt a chip reconfiguration. - * This means switching to active high polarity and - * inverting all fan speed values. - */ - int i; - u8 pwm[3]; - - for (i = 0; i < 3; i++) - pwm[i] = it87_read_value(data, - IT87_REG_PWM[i]); - - /* - * If any fan is in automatic pwm mode, the polarity - * might be correct, as suspicious as it seems, so we - * better don't change anything (but still disable the - * PWM interface). - */ - if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) { - dev_info(dev, - "Reconfiguring PWM to active high polarity\n"); - it87_write_value(data, IT87_REG_FAN_CTL, - tmp | 0x87); - for (i = 0; i < 3; i++) - it87_write_value(data, - IT87_REG_PWM[i], - 0x7f & ~pwm[i]); - return 1; - } - - dev_info(dev, - "PWM configuration is too broken to be fixed\n"); - } - - dev_info(dev, - "Detected broken BIOS defaults, disabling PWM interface\n"); - return 0; - } else if (fix_pwm_polarity) { - dev_info(dev, - "PWM configuration looks sane, won't touch\n"); - } - - return 1; -} - -/* Called when we have found a new IT87. */ -static void it87_init_device(struct platform_device *pdev) -{ - struct it87_sio_data *sio_data = dev_get_platdata(&pdev->dev); - struct it87_data *data = platform_get_drvdata(pdev); - int tmp, i; - u8 mask; - - /* - * For each PWM channel: - * - If it is in automatic mode, setting to manual mode should set - * the fan to full speed by default. - * - If it is in manual mode, we need a mapping to temperature - * channels to use when later setting to automatic mode later. - * Use a 1:1 mapping by default (we are clueless.) - * In both cases, the value can (and should) be changed by the user - * prior to switching to a different mode. - * Note that this is no longer needed for the IT8721F and later, as - * these have separate registers for the temperature mapping and the - * manual duty cycle. - */ - for (i = 0; i < 3; i++) { - data->pwm_temp_map[i] = i; - data->pwm_duty[i] = 0x7f; /* Full speed */ - data->auto_pwm[i][3] = 0x7f; /* Full speed, hard-coded */ - } - - /* - * Some chips seem to have default value 0xff for all limit - * registers. For low voltage limits it makes no sense and triggers - * alarms, so change to 0 instead. For high temperature limits, it - * means -1 degree C, which surprisingly doesn't trigger an alarm, - * but is still confusing, so change to 127 degrees C. - */ - for (i = 0; i < 8; i++) { - tmp = it87_read_value(data, IT87_REG_VIN_MIN(i)); - if (tmp == 0xff) - it87_write_value(data, IT87_REG_VIN_MIN(i), 0); - } - for (i = 0; i < 3; i++) { - tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i)); - if (tmp == 0xff) - it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127); - } - - /* - * Temperature channels are not forcibly enabled, as they can be - * set to two different sensor types and we can't guess which one - * is correct for a given system. These channels can be enabled at - * run-time through the temp{1-3}_type sysfs accessors if needed. - */ - - /* Check if voltage monitors are reset manually or by some reason */ - tmp = it87_read_value(data, IT87_REG_VIN_ENABLE); - if ((tmp & 0xff) == 0) { - /* Enable all voltage monitors */ - it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff); - } - - /* Check if tachometers are reset manually or by some reason */ - mask = 0x70 & ~(sio_data->skip_fan << 4); - data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL); - if ((data->fan_main_ctrl & mask) == 0) { - /* Enable all fan tachometers */ - data->fan_main_ctrl |= mask; - it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, - data->fan_main_ctrl); - } - data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; - - tmp = it87_read_value(data, IT87_REG_FAN_16BIT); - - /* Set tachometers to 16-bit mode if needed */ - if (has_fan16_config(data)) { - if (~tmp & 0x07 & data->has_fan) { - dev_dbg(&pdev->dev, - "Setting fan1-3 to 16-bit mode\n"); - it87_write_value(data, IT87_REG_FAN_16BIT, - tmp | 0x07); - } - } - - /* Check for additional fans */ - if (has_five_fans(data)) { - if (tmp & (1 << 4)) - data->has_fan |= (1 << 3); /* fan4 enabled */ - if (tmp & (1 << 5)) - data->has_fan |= (1 << 4); /* fan5 enabled */ - if (has_six_fans(data) && (tmp & (1 << 2))) - data->has_fan |= (1 << 5); /* fan6 enabled */ - } - - /* Fan input pins may be used for alternative functions */ - data->has_fan &= ~sio_data->skip_fan; - - /* Check if pwm5, pwm6 are enabled */ - if (has_six_pwm(data)) { - /* The following code may be IT8620E specific */ - tmp = it87_read_value(data, IT87_REG_FAN_DIV); - if ((tmp & 0xc0) == 0xc0) - sio_data->skip_pwm |= (1 << 4); - if (!(tmp & (1 << 3))) - sio_data->skip_pwm |= (1 << 5); - } - - /* Start monitoring */ - it87_write_value(data, IT87_REG_CONFIG, - (it87_read_value(data, IT87_REG_CONFIG) & 0x3e) - | (update_vbat ? 0x41 : 0x01)); -} - -static void it87_update_pwm_ctrl(struct it87_data *data, int nr) -{ - data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM[nr]); - if (has_newer_autopwm(data)) { - data->pwm_temp_map[nr] = (data->pwm_ctrl[nr] & 0x03) + - nr < 3 ? 0 : 3; - data->pwm_duty[nr] = it87_read_value(data, - IT87_REG_PWM_DUTY[nr]); - } else { - if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */ - data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03; - else /* Manual mode */ - data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f; - } - - if (has_old_autopwm(data)) { - int i; - - for (i = 0; i < 5 ; i++) - data->auto_temp[nr][i] = it87_read_value(data, - IT87_REG_AUTO_TEMP(nr, i)); - for (i = 0; i < 3 ; i++) - data->auto_pwm[nr][i] = it87_read_value(data, - IT87_REG_AUTO_PWM(nr, i)); - } -} - -static struct it87_data *it87_update_device(struct device *dev) -{ - struct it87_data *data = dev_get_drvdata(dev); - int i; - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - if (update_vbat) { - /* - * Cleared after each update, so reenable. Value - * returned by this read will be previous value - */ - it87_write_value(data, IT87_REG_CONFIG, - it87_read_value(data, IT87_REG_CONFIG) | 0x40); - } - for (i = 0; i <= 7; i++) { - data->in[i][0] = - it87_read_value(data, IT87_REG_VIN(i)); - data->in[i][1] = - it87_read_value(data, IT87_REG_VIN_MIN(i)); - data->in[i][2] = - it87_read_value(data, IT87_REG_VIN_MAX(i)); - } - /* in8 (battery) has no limit registers */ - data->in[8][0] = it87_read_value(data, IT87_REG_VIN(8)); - if (has_avcc3(data)) - data->in[9][0] = it87_read_value(data, IT87_REG_AVCC3); - - for (i = 0; i < 6; i++) { - /* Skip disabled fans */ - if (!(data->has_fan & (1 << i))) - continue; - - data->fan[i][1] = - it87_read_value(data, IT87_REG_FAN_MIN[i]); - data->fan[i][0] = it87_read_value(data, - IT87_REG_FAN[i]); - /* Add high byte if in 16-bit mode */ - if (has_16bit_fans(data)) { - data->fan[i][0] |= it87_read_value(data, - IT87_REG_FANX[i]) << 8; - data->fan[i][1] |= it87_read_value(data, - IT87_REG_FANX_MIN[i]) << 8; - } - } - for (i = 0; i < 3; i++) { - if (!(data->has_temp & (1 << i))) - continue; - data->temp[i][0] = - it87_read_value(data, IT87_REG_TEMP(i)); - data->temp[i][1] = - it87_read_value(data, IT87_REG_TEMP_LOW(i)); - data->temp[i][2] = - it87_read_value(data, IT87_REG_TEMP_HIGH(i)); - if (has_temp_offset(data)) - data->temp[i][3] = - it87_read_value(data, - IT87_REG_TEMP_OFFSET[i]); - } - - /* Newer chips don't have clock dividers */ - if ((data->has_fan & 0x07) && !has_16bit_fans(data)) { - i = it87_read_value(data, IT87_REG_FAN_DIV); - data->fan_div[0] = i & 0x07; - data->fan_div[1] = (i >> 3) & 0x07; - data->fan_div[2] = (i & 0x40) ? 3 : 1; - } - - data->alarms = - it87_read_value(data, IT87_REG_ALARM1) | - (it87_read_value(data, IT87_REG_ALARM2) << 8) | - (it87_read_value(data, IT87_REG_ALARM3) << 16); - data->beeps = it87_read_value(data, IT87_REG_BEEP_ENABLE); - - data->fan_main_ctrl = it87_read_value(data, - IT87_REG_FAN_MAIN_CTRL); - data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL); - for (i = 0; i < 6; i++) - it87_update_pwm_ctrl(data, i); - - data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); - data->extra = it87_read_value(data, IT87_REG_TEMP_EXTRA); - /* - * The IT8705F does not have VID capability. - * The IT8718F and later don't use IT87_REG_VID for the - * same purpose. - */ - if (data->type == it8712 || data->type == it8716) { - data->vid = it87_read_value(data, IT87_REG_VID); - /* - * The older IT8712F revisions had only 5 VID pins, - * but we assume it is always safe to read 6 bits. - */ - data->vid &= 0x3f; - } - data->last_updated = jiffies; - data->valid = 1; - } - - mutex_unlock(&data->update_lock); - - return data; -} +static struct platform_driver it87_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = it87_probe, + .remove = it87_remove, +}; static int __init it87_device_add(int index, unsigned short address, const struct it87_sio_data *sio_data) |
