summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/char/cyclades.c58
1 files changed, 17 insertions, 41 deletions
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index c9a503f4724a..6adbc9759661 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -604,7 +604,6 @@
#define NR_PORTS 256
-#define ZE_V1_NPORTS 64
#define ZO_V1 0
#define ZO_V2 1
#define ZE_V1 2
@@ -1777,7 +1776,6 @@ static void cyz_poll(unsigned long arg)
struct tty_struct *tty;
struct FIRM_ID __iomem *firm_id;
struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
struct BUF_CTRL __iomem *buf_ctrl;
unsigned long expires = jiffies + HZ;
unsigned int port, card;
@@ -1793,11 +1791,9 @@ static void cyz_poll(unsigned long arg)
firm_id = cinfo->base_addr + ID_ADDRESS;
zfw_ctrl = cinfo->base_addr +
(readl(&firm_id->zfwctrl_addr) & 0xfffff);
- board_ctrl = &(zfw_ctrl->board_ctrl);
/* Skip first polling cycle to avoid racing conditions with the FW */
if (!cinfo->intr_enabled) {
- cinfo->nports = (int)readl(&board_ctrl->n_channel);
cinfo->intr_enabled = 1;
continue;
}
@@ -2413,16 +2409,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
interrupts should be enabled as soon as the first open
happens to one of its ports. */
if (!cinfo->intr_enabled) {
- struct ZFW_CTRL __iomem *zfw_ctrl;
- struct BOARD_CTRL __iomem *board_ctrl;
u16 intr;
- zfw_ctrl = cinfo->base_addr +
- (readl(&firm_id->zfwctrl_addr) &
- 0xfffff);
-
- board_ctrl = &zfw_ctrl->board_ctrl;
-
/* Enable interrupts on the PLX chip */
intr = readw(&cinfo->ctl_addr.p9060->
intr_ctrl_stat) | 0x0900;
@@ -2435,8 +2423,6 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
printk(KERN_ERR "cyc:IRQ enable retval "
"was %x\n", retval);
}
- cinfo->nports =
- (int)readl(&board_ctrl->n_channel);
cinfo->intr_enabled = 1;
}
}
@@ -4340,30 +4326,20 @@ static void cy_hangup(struct tty_struct *tty)
static int __devinit cy_init_card(struct cyclades_card *cinfo)
{
struct cyclades_port *info;
- unsigned int nports, port;
+ unsigned int port;
unsigned short chip_number;
- int uninitialized_var(index);
spin_lock_init(&cinfo->card_lock);
+ cinfo->intr_enabled = 0;
- if (cy_is_Z(cinfo)) { /* Cyclades-Z */
- nports = (cinfo->hw_ver == ZE_V1) ? ZE_V1_NPORTS : 8;
- cinfo->intr_enabled = 0;
- cinfo->nports = 0; /* Will be correctly set later, after
- Z FW is loaded */
- } else {
- index = cinfo->bus_index;
- nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips;
- }
-
- cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL);
+ cinfo->ports = kcalloc(cinfo->nports, sizeof(*cinfo->ports),
+ GFP_KERNEL);
if (cinfo->ports == NULL) {
printk(KERN_ERR "Cyclades: cannot allocate ports\n");
- cinfo->nports = 0;
return -ENOMEM;
}
- for (port = cinfo->first_line; port < cinfo->first_line + nports;
+ for (port = cinfo->first_line; port < cinfo->first_line + cinfo->nports;
port++) {
info = &cinfo->ports[port - cinfo->first_line];
tty_port_init(&info->port);
@@ -4388,6 +4364,7 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
cyz_rx_restart, (unsigned long)info);
#endif
} else {
+ int index = cinfo->bus_index;
info->type = PORT_CIRRUS;
info->xmit_fifo_size = CyMAX_CHAR_FIFO;
info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS;
@@ -4615,7 +4592,8 @@ static int __init cy_detect_isa(void)
cy_card[j].irq = (int)cy_isa_irq;
cy_card[j].bus_index = 0;
cy_card[j].first_line = cy_next_channel;
- cy_card[j].num_chips = cy_isa_nchan / 4;
+ cy_card[j].num_chips = cy_isa_nchan / CyPORTS_PER_CHIP;
+ cy_card[j].nports = cy_isa_nchan;
if (cy_init_card(&cy_card[j])) {
cy_card[j].base_addr = NULL;
free_irq(cy_isa_irq, &cy_card[j]);
@@ -4771,7 +4749,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
struct CUSTOM_REG __iomem *cust = base_addr;
struct ZFW_CTRL __iomem *pt_zfwctrl;
void __iomem *tmp;
- u32 mailbox, status;
+ u32 mailbox, status, nchan;
unsigned int i;
int retval;
@@ -4892,11 +4870,11 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
base_addr + ID_ADDRESS, readl(&fid->zfwctrl_addr),
base_addr + readl(&fid->zfwctrl_addr));
+ nchan = readl(&pt_zfwctrl->board_ctrl.n_channel);
dev_info(&pdev->dev, "Cyclades-Z FW loaded: version = %x, ports = %u\n",
- readl(&pt_zfwctrl->board_ctrl.fw_version),
- readl(&pt_zfwctrl->board_ctrl.n_channel));
+ readl(&pt_zfwctrl->board_ctrl.fw_version), nchan);
- if (readl(&pt_zfwctrl->board_ctrl.n_channel) == 0) {
+ if (nchan == 0) {
dev_warn(&pdev->dev, "no Cyclades-Z ports were found. Please "
"check the connection between the Z host card and the "
"serial expanders.\n");
@@ -4922,7 +4900,7 @@ static int __devinit cyz_load_fw(struct pci_dev *pdev, void __iomem *base_addr,
cy_writel(&ctl_addr->intr_ctrl_stat, readl(&ctl_addr->intr_ctrl_stat) |
0x00030800UL);
- return 0;
+ return nchan;
err_rel:
release_firmware(fw);
err:
@@ -5027,12 +5005,8 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
if (mailbox == ZE_V1) {
card_name = "Cyclades-Ze";
-
- nchan = ZE_V1_NPORTS;
} else {
card_name = "Cyclades-8Zo";
- nchan = 8;
-
#ifdef CY_PCI_DEBUG
if (mailbox == ZO_V1) {
cy_writel(&ctl_addr->loc_addr_base, WIN_CREG);
@@ -5057,8 +5031,9 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
}
retval = cyz_load_fw(pdev, addr2, addr0, irq);
- if (retval)
+ if (retval <= 0)
goto err_unmap;
+ nchan = retval;
}
if ((cy_next_channel + nchan) > NR_PORTS) {
@@ -5088,7 +5063,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "could not allocate IRQ\n");
goto err_unmap;
}
- cy_card[card_no].num_chips = nchan / 4;
+ cy_card[card_no].num_chips = nchan / CyPORTS_PER_CHIP;
} else {
cy_card[card_no].hw_ver = mailbox;
cy_card[card_no].num_chips = (unsigned int)-1;
@@ -5112,6 +5087,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
cy_card[card_no].irq = irq;
cy_card[card_no].bus_index = 1;
cy_card[card_no].first_line = cy_next_channel;
+ cy_card[card_no].nports = nchan;
retval = cy_init_card(&cy_card[card_no]);
if (retval)
goto err_null;
OpenPOWER on IntegriCloud