ASoC: ssm2602: Split SPI and I2C code into different modules

There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
    * We need to be extra careful to make sure to not build the driver into the
      kernel if one of the subsystems is build as a module (Currently only I2C
      can be build as a module).
    * The module init path error handling is rather ugly. E.g. what should be
      done if either the SPI or the I2C driver fails to register? Most drivers
      that implement SPI and I2C in the same module currently fallback to
      undefined behavior in that case. Splitting the the driver into two
      modules, one for each bus allows the registration of the other bus driver
      to continue without problems if one of them fails.

This patch splits the ssm2602 driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.

While we are at it also cleanup the include section of the ssm2602 driver and
remove unneeded includes.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 57 insertions, 0 deletions

diff --git a/sound/soc/codecs/ssm2602-i2c.c b/sound/soc/codecs/ssm2602-i2c.c
new file mode 100644
index 000000000000..abd63d537173
--- /dev/null
+++ b/sound/soc/codecs/ssm2602-i2c.c
@@ -0,0 +1,57 @@
+/*
+ * SSM2602/SSM2603/SSM2604 I2C audio driver
+ *
+ * Copyright 2014 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <sound/soc.h>
+
+#include "ssm2602.h"
+
+/*
+ * ssm2602 2 wire address is determined by GPIO5
+ * state during powerup.
+ *    low  = 0x1a
+ *    high = 0x1b
+ */
+static int ssm2602_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	return ssm2602_probe(&client->dev, id->driver_data,
+		devm_regmap_init_i2c(client, &ssm2602_regmap_config));
+}
+
+static int ssm2602_i2c_remove(struct i2c_client *client)
+{
+	snd_soc_unregister_codec(&client->dev);
+	return 0;
+}
+
+static const struct i2c_device_id ssm2602_i2c_id[] = {
+	{ "ssm2602", SSM2602 },
+	{ "ssm2603", SSM2602 },
+	{ "ssm2604", SSM2604 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ssm2602_i2c_id);
+
+static struct i2c_driver ssm2602_i2c_driver = {
+	.driver = {
+		.name = "ssm2602",
+		.owner = THIS_MODULE,
+	},
+	.probe = ssm2602_i2c_probe,
+	.remove = ssm2602_i2c_remove,
+	.id_table = ssm2602_i2c_id,
+};
+module_i2c_driver(ssm2602_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC SSM2602/SSM2603/SSM2604 I2C driver");
+MODULE_AUTHOR("Cliff Cai");
+MODULE_LICENSE("GPL");