Merge tag 'xceiv-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: xceiv: patches for v3.7 merge window

nop xceiv got its own header to avoid polluting otg.h. It has also
learned to work as USB2 and USB3 phys so we can use it on USB3
controllers.

Together with those two changes to nop xceiv, we're adding basic
PHY support to dwc3 driver, this is to allow platforms which actually
have a SW-controllable PHY talk to them through dwc3 driver.

We're adding a new phy driver for the OMAP architecture. This driver
is for the PHY found in OMAP4 SoCs, and a new phy driver for the
marvell architecture. An extra phy driver - for Tegra SoCs - is now
moving from arch/arm/mach-tegra* to drivers/usb/phy.

Also here, there's the creation of <linux/usb/phy.h> which should be
used from now on for PHY drivers, even those which don't support
OTG.

6 files changed, 418 insertions, 235 deletions

diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h
new file mode 100644
index 000000000000..28884c717411
--- /dev/null
+++ b/include/linux/usb/nop-usb-xceiv.h
@@ -0,0 +1,24 @@
+#ifndef __LINUX_USB_NOP_XCEIV_H
+#define __LINUX_USB_NOP_XCEIV_H
+
+#include <linux/usb/otg.h>
+
+struct nop_usb_xceiv_platform_data {
+	enum usb_phy_type type;
+};
+
+#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
+/* sometimes transceivers are accessed only through e.g. ULPI */
+extern void usb_nop_xceiv_register(void);
+extern void usb_nop_xceiv_unregister(void);
+#else
+static inline void usb_nop_xceiv_register(void)
+{
+}
+
+static inline void usb_nop_xceiv_unregister(void)
+{
+}
+#endif
+
+#endif /* __LINUX_USB_NOP_XCEIV_H */
diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h
new file mode 100644
index 000000000000..0ea17f8ae820
--- /dev/null
+++ b/include/linux/usb/omap_usb.h
@@ -0,0 +1,46 @@
+/*
+ * omap_usb.h -- omap usb2 phy header file
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_USB2_H
+#define __DRIVERS_OMAP_USB2_H
+
+#include <linux/usb/otg.h>
+
+struct omap_usb {
+	struct usb_phy		phy;
+	struct phy_companion	*comparator;
+	struct device		*dev;
+	u32 __iomem		*control_dev;
+	struct clk		*wkupclk;
+	u8			is_suspended:1;
+};
+
+#define	PHY_PD	0x1
+
+#define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
+
+#if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
+extern int omap_usb2_set_comparator(struct phy_companion *comparator);
+#else
+static inline int omap_usb2_set_comparator(struct phy_companion *comparator)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __DRIVERS_OMAP_USB_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 45824be0a2f9..e8a5fe87c6bd 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -9,56 +9,7 @@
 #ifndef __LINUX_USB_OTG_H
 #define __LINUX_USB_OTG_H
 
-#include <linux/notifier.h>
-
-/* OTG defines lots of enumeration states before device reset */
-enum usb_otg_state {
-	OTG_STATE_UNDEFINED = 0,
-
-	/* single-role peripheral, and dual-role default-b */
-	OTG_STATE_B_IDLE,
-	OTG_STATE_B_SRP_INIT,
-	OTG_STATE_B_PERIPHERAL,
-
-	/* extra dual-role default-b states */
-	OTG_STATE_B_WAIT_ACON,
-	OTG_STATE_B_HOST,
-
-	/* dual-role default-a */
-	OTG_STATE_A_IDLE,
-	OTG_STATE_A_WAIT_VRISE,
-	OTG_STATE_A_WAIT_BCON,
-	OTG_STATE_A_HOST,
-	OTG_STATE_A_SUSPEND,
-	OTG_STATE_A_PERIPHERAL,
-	OTG_STATE_A_WAIT_VFALL,
-	OTG_STATE_A_VBUS_ERR,
-};
-
-enum usb_phy_events {
-	USB_EVENT_NONE,         /* no events or cable disconnected */
-	USB_EVENT_VBUS,         /* vbus valid event */
-	USB_EVENT_ID,           /* id was grounded */
-	USB_EVENT_CHARGER,      /* usb dedicated charger */
-	USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
-};
-
-/* associate a type with PHY */
-enum usb_phy_type {
-	USB_PHY_TYPE_UNDEFINED,
-	USB_PHY_TYPE_USB2,
-	USB_PHY_TYPE_USB3,
-};
-
-struct usb_phy;
-
-/* for transceivers connected thru an ULPI interface, the user must
- * provide access ops
- */
-struct usb_phy_io_ops {
-	int (*read)(struct usb_phy *x, u32 reg);
-	int (*write)(struct usb_phy *x, u32 val, u32 reg);
-};
+#include <linux/usb/phy.h>
 
 struct usb_otg {
 	u8			default_a;
@@ -85,134 +36,9 @@ struct usb_otg {
 
 };
 
-/*
- * the otg driver needs to interact with both device side and host side
- * usb controllers.  it decides which controller is active at a given
- * moment, using the transceiver, ID signal, HNP and sometimes static
- * configuration information (including "board isn't wired for otg").
- */
-struct usb_phy {
-	struct device		*dev;
-	const char		*label;
-	unsigned int		 flags;
-
-	enum usb_phy_type	type;
-	enum usb_otg_state	state;
-	enum usb_phy_events	last_event;
-
-	struct usb_otg		*otg;
-
-	struct device		*io_dev;
-	struct usb_phy_io_ops	*io_ops;
-	void __iomem		*io_priv;
-
-	/* for notification of usb_phy_events */
-	struct atomic_notifier_head	notifier;
-
-	/* to pass extra port status to the root hub */
-	u16			port_status;
-	u16			port_change;
-
-	/* to support controllers that have multiple transceivers */
-	struct list_head	head;
-
-	/* initialize/shutdown the OTG controller */
-	int	(*init)(struct usb_phy *x);
-	void	(*shutdown)(struct usb_phy *x);
-
-	/* effective for B devices, ignored for A-peripheral */
-	int	(*set_power)(struct usb_phy *x,
-				unsigned mA);
-
-	/* for non-OTG B devices: set transceiver into suspend mode */
-	int	(*set_suspend)(struct usb_phy *x,
-				int suspend);
-
-	/* notify phy connect status change */
-	int	(*notify_connect)(struct usb_phy *x, int port);
-	int	(*notify_disconnect)(struct usb_phy *x, int port);
-};
-
-
-/* for board-specific init logic */
-extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type);
-extern void usb_remove_phy(struct usb_phy *);
-
-#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
-/* sometimes transceivers are accessed only through e.g. ULPI */
-extern void usb_nop_xceiv_register(void);
-extern void usb_nop_xceiv_unregister(void);
-#else
-static inline void usb_nop_xceiv_register(void)
-{
-}
-
-static inline void usb_nop_xceiv_unregister(void)
-{
-}
-#endif
-
-/* helpers for direct access thru low-level io interface */
-static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
-{
-	if (x->io_ops && x->io_ops->read)
-		return x->io_ops->read(x, reg);
-
-	return -EINVAL;
-}
-
-static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
-{
-	if (x->io_ops && x->io_ops->write)
-		return x->io_ops->write(x, val, reg);
-
-	return -EINVAL;
-}
-
-static inline int
-usb_phy_init(struct usb_phy *x)
-{
-	if (x->init)
-		return x->init(x);
-
-	return 0;
-}
-
-static inline void
-usb_phy_shutdown(struct usb_phy *x)
-{
-	if (x->shutdown)
-		x->shutdown(x);
-}
-
-/* for usb host and peripheral controller drivers */
 #ifdef CONFIG_USB_OTG_UTILS
-extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
-extern struct usb_phy *devm_usb_get_phy(struct device *dev,
-	enum usb_phy_type type);
-extern void usb_put_phy(struct usb_phy *);
-extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
 extern const char *otg_state_string(enum usb_otg_state state);
 #else
-static inline struct usb_phy *usb_get_phy(enum usb_phy_type type)
-{
-	return NULL;
-}
-
-static inline struct usb_phy *devm_usb_get_phy(struct device *dev,
-	enum usb_phy_type type)
-{
-	return NULL;
-}
-
-static inline void usb_put_phy(struct usb_phy *x)
-{
-}
-
-static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x)
-{
-}
-
 static inline const char *otg_state_string(enum usb_otg_state state)
 {
 	return NULL;
@@ -262,42 +88,6 @@ otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph)
 }
 
 static inline int
-usb_phy_set_power(struct usb_phy *x, unsigned mA)
-{
-	if (x && x->set_power)
-		return x->set_power(x, mA);
-	return 0;
-}
-
-/* Context: can sleep */
-static inline int
-usb_phy_set_suspend(struct usb_phy *x, int suspend)
-{
-	if (x->set_suspend != NULL)
-		return x->set_suspend(x, suspend);
-	else
-		return 0;
-}
-
-static inline int
-usb_phy_notify_connect(struct usb_phy *x, int port)
-{
-	if (x->notify_connect)
-		return x->notify_connect(x, port);
-	else
-		return 0;
-}
-
-static inline int
-usb_phy_notify_disconnect(struct usb_phy *x, int port)
-{
-	if (x->notify_disconnect)
-		return x->notify_disconnect(x, port);
-	else
-		return 0;
-}
-
-static inline int
 otg_start_srp(struct usb_otg *otg)
 {
 	if (otg && otg->start_srp)
@@ -306,31 +96,7 @@ otg_start_srp(struct usb_otg *otg)
 	return -ENOTSUPP;
 }
 
-/* notifiers */
-static inline int
-usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
-{
-	return atomic_notifier_chain_register(&x->notifier, nb);
-}
-
-static inline void
-usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
-{
-	atomic_notifier_chain_unregister(&x->notifier, nb);
-}
-
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
-static inline const char *usb_phy_type_string(enum usb_phy_type type)
-{
-	switch (type) {
-	case USB_PHY_TYPE_USB2:
-		return "USB2 PHY";
-	case USB_PHY_TYPE_USB3:
-		return "USB3 PHY";
-	default:
-		return "UNKNOWN PHY TYPE";
-	}
-}
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
new file mode 100644
index 000000000000..06b5bae35b29
--- /dev/null
+++ b/include/linux/usb/phy.h
@@ -0,0 +1,233 @@
+/* USB OTG (On The Go) defines */
+/*
+ *
+ * These APIs may be used between USB controllers.  USB device drivers
+ * (for either host or peripheral roles) don't use these calls; they
+ * continue to use just usb_device and usb_gadget.
+ */
+
+#ifndef __LINUX_USB_PHY_H
+#define __LINUX_USB_PHY_H
+
+#include <linux/notifier.h>
+
+enum usb_phy_events {
+	USB_EVENT_NONE,         /* no events or cable disconnected */
+	USB_EVENT_VBUS,         /* vbus valid event */
+	USB_EVENT_ID,           /* id was grounded */
+	USB_EVENT_CHARGER,      /* usb dedicated charger */
+	USB_EVENT_ENUMERATED,   /* gadget driver enumerated */
+};
+
+/* associate a type with PHY */
+enum usb_phy_type {
+	USB_PHY_TYPE_UNDEFINED,
+	USB_PHY_TYPE_USB2,
+	USB_PHY_TYPE_USB3,
+};
+
+/* OTG defines lots of enumeration states before device reset */
+enum usb_otg_state {
+	OTG_STATE_UNDEFINED = 0,
+
+	/* single-role peripheral, and dual-role default-b */
+	OTG_STATE_B_IDLE,
+	OTG_STATE_B_SRP_INIT,
+	OTG_STATE_B_PERIPHERAL,
+
+	/* extra dual-role default-b states */
+	OTG_STATE_B_WAIT_ACON,
+	OTG_STATE_B_HOST,
+
+	/* dual-role default-a */
+	OTG_STATE_A_IDLE,
+	OTG_STATE_A_WAIT_VRISE,
+	OTG_STATE_A_WAIT_BCON,
+	OTG_STATE_A_HOST,
+	OTG_STATE_A_SUSPEND,
+	OTG_STATE_A_PERIPHERAL,
+	OTG_STATE_A_WAIT_VFALL,
+	OTG_STATE_A_VBUS_ERR,
+};
+
+struct usb_phy;
+struct usb_otg;
+
+/* for transceivers connected thru an ULPI interface, the user must
+ * provide access ops
+ */
+struct usb_phy_io_ops {
+	int (*read)(struct usb_phy *x, u32 reg);
+	int (*write)(struct usb_phy *x, u32 val, u32 reg);
+};
+
+struct usb_phy {
+	struct device		*dev;
+	const char		*label;
+	unsigned int		 flags;
+
+	enum usb_phy_type	type;
+	enum usb_otg_state	state;
+	enum usb_phy_events	last_event;
+
+	struct usb_otg		*otg;
+
+	struct device		*io_dev;
+	struct usb_phy_io_ops	*io_ops;
+	void __iomem		*io_priv;
+
+	/* for notification of usb_phy_events */
+	struct atomic_notifier_head	notifier;
+
+	/* to pass extra port status to the root hub */
+	u16			port_status;
+	u16			port_change;
+
+	/* to support controllers that have multiple transceivers */
+	struct list_head	head;
+
+	/* initialize/shutdown the OTG controller */
+	int	(*init)(struct usb_phy *x);
+	void	(*shutdown)(struct usb_phy *x);
+
+	/* effective for B devices, ignored for A-peripheral */
+	int	(*set_power)(struct usb_phy *x,
+				unsigned mA);
+
+	/* for non-OTG B devices: set transceiver into suspend mode */
+	int	(*set_suspend)(struct usb_phy *x,
+				int suspend);
+
+	/* notify phy connect status change */
+	int	(*notify_connect)(struct usb_phy *x, int port);
+	int	(*notify_disconnect)(struct usb_phy *x, int port);
+};
+
+
+/* for board-specific init logic */
+extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type);
+extern void usb_remove_phy(struct usb_phy *);
+
+/* helpers for direct access thru low-level io interface */
+static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
+{
+	if (x->io_ops && x->io_ops->read)
+		return x->io_ops->read(x, reg);
+
+	return -EINVAL;
+}
+
+static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
+{
+	if (x->io_ops && x->io_ops->write)
+		return x->io_ops->write(x, val, reg);
+
+	return -EINVAL;
+}
+
+static inline int
+usb_phy_init(struct usb_phy *x)
+{
+	if (x->init)
+		return x->init(x);
+
+	return 0;
+}
+
+static inline void
+usb_phy_shutdown(struct usb_phy *x)
+{
+	if (x->shutdown)
+		x->shutdown(x);
+}
+
+/* for usb host and peripheral controller drivers */
+#ifdef CONFIG_USB_OTG_UTILS
+extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
+extern struct usb_phy *devm_usb_get_phy(struct device *dev,
+	enum usb_phy_type type);
+extern void usb_put_phy(struct usb_phy *);
+extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
+#else
+static inline struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+	return NULL;
+}
+
+static inline struct usb_phy *devm_usb_get_phy(struct device *dev,
+	enum usb_phy_type type)
+{
+	return NULL;
+}
+
+static inline void usb_put_phy(struct usb_phy *x)
+{
+}
+
+static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x)
+{
+}
+
+#endif
+
+static inline int
+usb_phy_set_power(struct usb_phy *x, unsigned mA)
+{
+	if (x && x->set_power)
+		return x->set_power(x, mA);
+	return 0;
+}
+
+/* Context: can sleep */
+static inline int
+usb_phy_set_suspend(struct usb_phy *x, int suspend)
+{
+	if (x->set_suspend != NULL)
+		return x->set_suspend(x, suspend);
+	else
+		return 0;
+}
+
+static inline int
+usb_phy_notify_connect(struct usb_phy *x, int port)
+{
+	if (x->notify_connect)
+		return x->notify_connect(x, port);
+	else
+		return 0;
+}
+
+static inline int
+usb_phy_notify_disconnect(struct usb_phy *x, int port)
+{
+	if (x->notify_disconnect)
+		return x->notify_disconnect(x, port);
+	else
+		return 0;
+}
+
+/* notifiers */
+static inline int
+usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&x->notifier, nb);
+}
+
+static inline void
+usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
+{
+	atomic_notifier_chain_unregister(&x->notifier, nb);
+}
+
+static inline const char *usb_phy_type_string(enum usb_phy_type type)
+{
+	switch (type) {
+	case USB_PHY_TYPE_USB2:
+		return "USB2 PHY";
+	case USB_PHY_TYPE_USB3:
+		return "USB3 PHY";
+	default:
+		return "UNKNOWN PHY TYPE";
+	}
+}
+#endif /* __LINUX_USB_PHY_H */
diff --git a/include/linux/usb/phy_companion.h b/include/linux/usb/phy_companion.h
new file mode 100644
index 000000000000..edd2ec23d282
--- /dev/null
+++ b/include/linux/usb/phy_companion.h
@@ -0,0 +1,34 @@
+/*
+ * phy-companion.h -- phy companion to indicate the comparator part of PHY
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_PHY_COMPANION_H
+#define __DRIVERS_PHY_COMPANION_H
+
+#include <linux/usb/otg.h>
+
+/* phy_companion to take care of VBUS, ID and srp capabilities */
+struct phy_companion {
+
+	/* effective for A-peripheral, ignored for B devices */
+	int	(*set_vbus)(struct phy_companion *x, bool enabled);
+
+	/* for B devices only:  start session with A-Host */
+	int	(*start_srp)(struct phy_companion *x);
+};
+
+#endif /* __DRIVERS_PHY_COMPANION_H */
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
new file mode 100644
index 000000000000..176b1ca06ae4
--- /dev/null
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TEGRA_USB_PHY_H
+#define __TEGRA_USB_PHY_H
+
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+
+struct tegra_utmip_config {
+	u8 hssync_start_delay;
+	u8 elastic_limit;
+	u8 idle_wait_delay;
+	u8 term_range_adj;
+	u8 xcvr_setup;
+	u8 xcvr_lsfslew;
+	u8 xcvr_lsrslew;
+};
+
+struct tegra_ulpi_config {
+	int reset_gpio;
+	const char *clk;
+};
+
+enum tegra_usb_phy_port_speed {
+	TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
+	TEGRA_USB_PHY_PORT_SPEED_LOW,
+	TEGRA_USB_PHY_PORT_SPEED_HIGH,
+};
+
+enum tegra_usb_phy_mode {
+	TEGRA_USB_PHY_MODE_DEVICE,
+	TEGRA_USB_PHY_MODE_HOST,
+};
+
+struct tegra_xtal_freq;
+
+struct tegra_usb_phy {
+	int instance;
+	const struct tegra_xtal_freq *freq;
+	void __iomem *regs;
+	void __iomem *pad_regs;
+	struct clk *clk;
+	struct clk *pll_u;
+	struct clk *pad_clk;
+	enum tegra_usb_phy_mode mode;
+	void *config;
+	struct usb_phy *ulpi;
+	struct usb_phy u_phy;
+	struct device *dev;
+};
+
+struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
+	void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
+
+void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
+
+void tegra_usb_phy_postresume(struct tegra_usb_phy *phy);
+
+void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
+				 enum tegra_usb_phy_port_speed port_speed);
+
+void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy);
+
+#endif /* __TEGRA_USB_PHY_H */