USB: split hub.h into ch11.h and merge-in hcd.h

Base on inputs from Alan Stern, split the hub.h header into:
- new ch11.h header (most of it) containing constants and
  structures from chapter 11 of the USB 2.0 spec.
- a small remaining part being merged into hcd.h.

Signed-of-by: Eric Lescouet <eric@lescouet.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 172 insertions, 0 deletions

diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
new file mode 100644
index 000000000000..35cb7357ff72
--- /dev/null
+++ b/include/linux/usb/ch11.h
@@ -0,0 +1,172 @@
+/*
+ * This file holds Hub protocol constants and data structures that are
+ * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
+ *
+ * It is used/shared between the USB core, the HCDs and couple of other USB
+ * drivers.
+ */
+
+#ifndef __LINUX_HUB_H
+#define __LINUX_HUB_H
+
+#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <linux/compiler.h>	/* likely()/unlikely() */
+
+/*
+ * Hub request types
+ */
+
+#define USB_RT_HUB	(USB_TYPE_CLASS | USB_RECIP_DEVICE)
+#define USB_RT_PORT	(USB_TYPE_CLASS | USB_RECIP_OTHER)
+
+/*
+ * Hub class requests
+ * See USB 2.0 spec Table 11-16
+ */
+#define HUB_CLEAR_TT_BUFFER	8
+#define HUB_RESET_TT		9
+#define HUB_GET_TT_STATE	10
+#define HUB_STOP_TT		11
+
+/*
+ * Hub Class feature numbers
+ * See USB 2.0 spec Table 11-17
+ */
+#define C_HUB_LOCAL_POWER	0
+#define C_HUB_OVER_CURRENT	1
+
+/*
+ * Port feature numbers
+ * See USB 2.0 spec Table 11-17
+ */
+#define USB_PORT_FEAT_CONNECTION	0
+#define USB_PORT_FEAT_ENABLE		1
+#define USB_PORT_FEAT_SUSPEND		2	/* L2 suspend */
+#define USB_PORT_FEAT_OVER_CURRENT	3
+#define USB_PORT_FEAT_RESET		4
+#define USB_PORT_FEAT_L1		5	/* L1 suspend */
+#define USB_PORT_FEAT_POWER		8
+#define USB_PORT_FEAT_LOWSPEED		9
+/* This value was never in Table 11-17 */
+#define USB_PORT_FEAT_HIGHSPEED		10
+/* This value is also fake */
+#define USB_PORT_FEAT_SUPERSPEED	11
+#define USB_PORT_FEAT_C_CONNECTION	16
+#define USB_PORT_FEAT_C_ENABLE		17
+#define USB_PORT_FEAT_C_SUSPEND		18
+#define USB_PORT_FEAT_C_OVER_CURRENT	19
+#define USB_PORT_FEAT_C_RESET		20
+#define USB_PORT_FEAT_TEST              21
+#define USB_PORT_FEAT_INDICATOR         22
+#define USB_PORT_FEAT_C_PORT_L1         23
+
+/*
+ * Hub Status and Hub Change results
+ * See USB 2.0 spec Table 11-19 and Table 11-20
+ */
+struct usb_port_status {
+	__le16 wPortStatus;
+	__le16 wPortChange;
+} __attribute__ ((packed));
+
+/*
+ * wPortStatus bit field
+ * See USB 2.0 spec Table 11-21
+ */
+#define USB_PORT_STAT_CONNECTION	0x0001
+#define USB_PORT_STAT_ENABLE		0x0002
+#define USB_PORT_STAT_SUSPEND		0x0004
+#define USB_PORT_STAT_OVERCURRENT	0x0008
+#define USB_PORT_STAT_RESET		0x0010
+#define USB_PORT_STAT_L1		0x0020
+/* bits 6 to 7 are reserved */
+#define USB_PORT_STAT_POWER		0x0100
+#define USB_PORT_STAT_LOW_SPEED		0x0200
+#define USB_PORT_STAT_HIGH_SPEED        0x0400
+#define USB_PORT_STAT_TEST              0x0800
+#define USB_PORT_STAT_INDICATOR         0x1000
+/* bits 13 to 15 are reserved */
+
+/*
+ * wPortChange bit field
+ * See USB 2.0 spec Table 11-22
+ * Bits 0 to 4 shown, bits 5 to 15 are reserved
+ */
+#define USB_PORT_STAT_C_CONNECTION	0x0001
+#define USB_PORT_STAT_C_ENABLE		0x0002
+#define USB_PORT_STAT_C_SUSPEND		0x0004
+#define USB_PORT_STAT_C_OVERCURRENT	0x0008
+#define USB_PORT_STAT_C_RESET		0x0010
+#define USB_PORT_STAT_C_L1		0x0020
+
+/*
+ * wHubCharacteristics (masks)
+ * See USB 2.0 spec Table 11-13, offset 3
+ */
+#define HUB_CHAR_LPSM		0x0003 /* D1 .. D0 */
+#define HUB_CHAR_COMPOUND	0x0004 /* D2       */
+#define HUB_CHAR_OCPM		0x0018 /* D4 .. D3 */
+#define HUB_CHAR_TTTT           0x0060 /* D6 .. D5 */
+#define HUB_CHAR_PORTIND        0x0080 /* D7       */
+
+struct usb_hub_status {
+	__le16 wHubStatus;
+	__le16 wHubChange;
+} __attribute__ ((packed));
+
+/*
+ * Hub Status & Hub Change bit masks
+ * See USB 2.0 spec Table 11-19 and Table 11-20
+ * Bits 0 and 1 for wHubStatus and wHubChange
+ * Bits 2 to 15 are reserved for both
+ */
+#define HUB_STATUS_LOCAL_POWER	0x0001
+#define HUB_STATUS_OVERCURRENT	0x0002
+#define HUB_CHANGE_LOCAL_POWER	0x0001
+#define HUB_CHANGE_OVERCURRENT	0x0002
+
+
+/*
+ * Hub descriptor
+ * See USB 2.0 spec Table 11-13
+ */
+
+#define USB_DT_HUB			(USB_TYPE_CLASS | 0x09)
+#define USB_DT_HUB_NONVAR_SIZE		7
+
+struct usb_hub_descriptor {
+	__u8  bDescLength;
+	__u8  bDescriptorType;
+	__u8  bNbrPorts;
+	__le16 wHubCharacteristics;
+	__u8  bPwrOn2PwrGood;
+	__u8  bHubContrCurrent;
+		/* add 1 bit for hub status change; round to bytes */
+	__u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
+	__u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
+} __attribute__ ((packed));
+
+
+/* port indicator status selectors, tables 11-7 and 11-25 */
+#define HUB_LED_AUTO	0
+#define HUB_LED_AMBER	1
+#define HUB_LED_GREEN	2
+#define HUB_LED_OFF	3
+
+enum hub_led_mode {
+	INDICATOR_AUTO = 0,
+	INDICATOR_CYCLE,
+	/* software blinks for attention:  software, hardware, reserved */
+	INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
+	INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
+	INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
+} __attribute__ ((packed));
+
+/* Transaction Translator Think Times, in bits */
+#define HUB_TTTT_8_BITS		0x00
+#define HUB_TTTT_16_BITS	0x20
+#define HUB_TTTT_24_BITS	0x40
+#define HUB_TTTT_32_BITS	0x60
+
+#endif /* __LINUX_HUB_H */