USB: cypress_m8.h: checkpatch cleanups

Minor whitespace cleanups to make checkpatch happy.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 29 insertions, 24 deletions

diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 1fd360e04065..67cf60826884 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -1,27 +1,32 @@
 #ifndef CYPRESS_M8_H
 #define CYPRESS_M8_H
 
-/* definitions and function prototypes used for the cypress USB to Serial controller */
+/*
+ * definitions and function prototypes used for the cypress USB to Serial
+ * controller
+ */
 
-/* For sending our feature buffer - controlling serial communication states */
-/* Linux HID has no support for serial devices so we do this through the driver */
-#define HID_REQ_GET_REPORT 0x01
-#define HID_REQ_SET_REPORT 0x09
+/*
+ * For sending our feature buffer - controlling serial communication states.
+ * Linux HID has no support for serial devices so we do this through the driver
+ */
+#define HID_REQ_GET_REPORT	0x01
+#define HID_REQ_SET_REPORT	0x09
 
 /* List other cypress USB to Serial devices here, and add them to the id_table */
 
 /* DeLorme Earthmate USB - a GPS device */
-#define	VENDOR_ID_DELORME		 0x1163
-#define PRODUCT_ID_EARTHMATEUSB		 0x0100
-#define PRODUCT_ID_EARTHMATEUSB_LT20	 0x0200
+#define VENDOR_ID_DELORME		0x1163
+#define PRODUCT_ID_EARTHMATEUSB		0x0100
+#define PRODUCT_ID_EARTHMATEUSB_LT20	0x0200
 
 /* Cypress HID->COM RS232 Adapter */
-#define VENDOR_ID_CYPRESS		 0x04b4
-#define PRODUCT_ID_CYPHIDCOM		 0x5500
+#define VENDOR_ID_CYPRESS		0x04b4
+#define PRODUCT_ID_CYPHIDCOM		0x5500
 
 /* Powercom UPS, chip CY7C63723 */
-#define VENDOR_ID_POWERCOM		 0x0d9f
-#define PRODUCT_ID_UPS			 0x0002
+#define VENDOR_ID_POWERCOM		0x0d9f
+#define PRODUCT_ID_UPS			0x0002
 
 /* Nokia CA-42 USB to serial cable */
 #define VENDOR_ID_DAZZLE		0x07d0
@@ -29,17 +34,17 @@
 /* End of device listing */
 
 /* Used for setting / requesting serial line settings */
-#define CYPRESS_SET_CONFIG 0x01
-#define CYPRESS_GET_CONFIG 0x02
+#define CYPRESS_SET_CONFIG	0x01
+#define CYPRESS_GET_CONFIG	0x02
 
 /* Used for throttle control */
-#define THROTTLED 0x1
-#define ACTUALLY_THROTTLED 0x2
+#define THROTTLED		0x1
+#define ACTUALLY_THROTTLED	0x2
 
-/* chiptypes - used in case firmware differs from the generic form ... offering
- * 	different baud speeds/etc.
+/*
+ * chiptypes - used in case firmware differs from the generic form ... offering
+ * different baud speeds/etc.
  */
-
 #define CT_EARTHMATE	0x01
 #define CT_CYPHIDCOM	0x02
 #define CT_CA42V2	0x03
@@ -50,15 +55,15 @@
 /* these are sent / read at byte 0 of the input/output hid reports */
 /* You can find these values defined in the CY4601 USB to Serial design notes */
 
-#define CONTROL_DTR 	0x20	/* data terminal ready - flow control - host to device */
+#define CONTROL_DTR	0x20	/* data terminal ready - flow control - host to device */
 #define UART_DSR	0x20	/* data set ready - flow control - device to host */
-#define CONTROL_RTS 	0x10	/* request to send - flow control - host to device */
+#define CONTROL_RTS	0x10	/* request to send - flow control - host to device */
 #define UART_CTS	0x10	/* clear to send - flow control - device to host */
-#define	UART_RI		0x10	/* ring indicator - modem - device to host */
+#define UART_RI		0x10	/* ring indicator - modem - device to host */
 #define UART_CD		0x40	/* carrier detect - modem - device to host */
-#define CYP_ERROR 	0x08	/* received from input report - device to host */
+#define CYP_ERROR	0x08	/* received from input report - device to host */
 /* Note - the below has nothing to do with the "feature report" reset */
-#define CONTROL_RESET	0x08  	/* sent with output report - host to device */
+#define CONTROL_RESET	0x08	/* sent with output report - host to device */
 
 /* End of RS-232 protocol definitions */