usb: Provide usb_speed_string() function

In a few places in the kernel, the code prints
a human-readable USB device speed (eg. "high speed").
This involves a switch statement sometimes wrapped
around in ({ ... }) block leading to code repetition.

To mitigate this issue, this commit introduces
usb_speed_string() function, which returns
a human-readable name of provided speed.

It also changes a few places switch was used to use
this new function.  This changes a bit the way the
speed is printed in few instances at the same time
standardising it.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 files changed, 60 insertions, 158 deletions

diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index ded8d6fddb53..4730016d7cd4 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3005,13 +3005,8 @@ __acquires(dev->lock)
 
 		/* link up all endpoints */
 		udc_setup_endpoints(dev);
-		if (dev->gadget.speed == USB_SPEED_HIGH) {
-			dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
-				"high");
-		} else if (dev->gadget.speed == USB_SPEED_FULL) {
-			dev_info(&dev->pdev->dev, "Connect: speed = %s\n",
-				"full");
-		}
+		dev_info(&dev->pdev->dev, "Connect: %s\n",
+			 usb_speed_string(dev->gadget.speed));
 
 		/* init ep 0 */
 		activate_control_endpoints(dev);
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 722c468e9b3c..271a9d873608 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1718,13 +1718,12 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 			spin_lock(&udc->lock);
 		}
 
-		if (status & USBA_HIGH_SPEED) {
-			DBG(DBG_BUS, "High-speed bus reset detected\n");
+		if (status & USBA_HIGH_SPEED)
 			udc->gadget.speed = USB_SPEED_HIGH;
-		} else {
-			DBG(DBG_BUS, "Full-speed bus reset detected\n");
+		else
 			udc->gadget.speed = USB_SPEED_FULL;
-		}
+		DBG(DBG_BUS, "%s bus reset detected\n",
+		    usb_speed_string(udc->gadget.speed));
 
 		ep0 = &usba_ep[0];
 		ep0->desc = &usba_ep0_desc;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c77aca11ad53..e74fd55c33d9 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -617,25 +617,9 @@ static int set_config(struct usb_composite_dev *cdev,
 		result = 0;
 	}
 
-	INFO(cdev, "%s speed config #%d: %s\n",
-		({ char *speed;
-		switch (gadget->speed) {
-		case USB_SPEED_LOW:
-			speed = "low";
-			break;
-		case USB_SPEED_FULL:
-			speed = "full";
-			break;
-		case USB_SPEED_HIGH:
-			speed = "high";
-			break;
-		case USB_SPEED_SUPER:
-			speed = "super";
-			break;
-		default:
-			speed = "?";
-			break;
-		} ; speed; }), number, c ? c->label : "unconfigured");
+	INFO(cdev, "%s config #%d: %s\n",
+	     usb_speed_string(gadget->speed),
+	     number, c ? c->label : "unconfigured");
 
 	if (!c)
 		goto done;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 39ece40a045f..4ac8084b579c 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -2862,17 +2862,10 @@ static int do_set_config(struct fsg_dev *fsg, u8 new_config)
 		fsg->config = new_config;
 		if ((rc = do_set_interface(fsg, 0)) != 0)
 			fsg->config = 0;	// Reset on errors
-		else {
-			char *speed;
-
-			switch (fsg->gadget->speed) {
-			case USB_SPEED_LOW:	speed = "low";	break;
-			case USB_SPEED_FULL:	speed = "full";	break;
-			case USB_SPEED_HIGH:	speed = "high";	break;
-			default: 		speed = "?";	break;
-			}
-			INFO(fsg, "%s speed config #%d\n", speed, fsg->config);
-		}
+		else
+			INFO(fsg, "%s config #%d\n",
+			     usb_speed_string(fsg->gadget->speed),
+			     fsg->config);
 	}
 	return rc;
 }
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index d6993507165b..b2c44e1d5813 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1715,34 +1715,31 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 	}
 }
 
+static inline enum usb_device_speed portscx_device_speed(u32 reg)
+{
+	switch (speed & PORTSCX_PORT_SPEED_MASK) {
+	case PORTSCX_PORT_SPEED_HIGH:
+		return USB_SPEED_HIGH;
+	case PORTSCX_PORT_SPEED_FULL:
+		return USB_SPEED_FULL;
+	case PORTSCX_PORT_SPEED_LOW:
+		return USB_SPEED_LOW;
+	default:
+		return USB_SPEED_UNKNOWN;
+	}
+}
+
 /* Process a port change interrupt */
 static void port_change_irq(struct fsl_udc *udc)
 {
-	u32 speed;
-
 	if (udc->bus_reset)
 		udc->bus_reset = 0;
 
 	/* Bus resetting is finished */
-	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
+	if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET))
 		/* Get the speed */
-		speed = (fsl_readl(&dr_regs->portsc1)
-				& PORTSCX_PORT_SPEED_MASK);
-		switch (speed) {
-		case PORTSCX_PORT_SPEED_HIGH:
-			udc->gadget.speed = USB_SPEED_HIGH;
-			break;
-		case PORTSCX_PORT_SPEED_FULL:
-			udc->gadget.speed = USB_SPEED_FULL;
-			break;
-		case PORTSCX_PORT_SPEED_LOW:
-			udc->gadget.speed = USB_SPEED_LOW;
-			break;
-		default:
-			udc->gadget.speed = USB_SPEED_UNKNOWN;
-			break;
-		}
-	}
+		udc->gadget.speed =
+			portscx_device_speed(fsl_readl(&dr_regs->portsc1));
 
 	/* Update USB state */
 	if (!udc->resume_state)
@@ -2167,20 +2164,8 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 			default:
 				s = "None"; break;
 			}
-			s;} ), ( {
-			char *s;
-			switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
-			case PORTSCX_PORT_SPEED_FULL:
-				s = "Full Speed"; break;
-			case PORTSCX_PORT_SPEED_LOW:
-				s = "Low Speed"; break;
-			case PORTSCX_PORT_SPEED_HIGH:
-				s = "High Speed"; break;
-			default:
-				s = "Undefined"; break;
-			}
-			s;
-		} ),
+			s;} ),
+		usb_speed_string(portscx_device_speed(tmp_reg)),
 		(tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
 		"Normal PHY mode" : "Low power mode",
 		(tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 8b9220e128a7..893b967b0aff 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -640,17 +640,8 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags)
 	if (result) {
 		gmidi_reset_config(dev);
 	} else {
-		char *speed;
-
-		switch (gadget->speed) {
-		case USB_SPEED_LOW:	speed = "low"; break;
-		case USB_SPEED_FULL:	speed = "full"; break;
-		case USB_SPEED_HIGH:	speed = "high"; break;
-		default:		speed = "?"; break;
-		}
-
 		dev->config = number;
-		INFO(dev, "%s speed\n", speed);
+		INFO(dev, "%s speed\n", usb_speed_string(gadget->speed));
 	}
 	return result;
 }
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 6e444995d398..c88158f307a8 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -1690,20 +1690,7 @@ static ssize_t show_langwell_udc(struct device *_dev,
 		"BmAttributes: %d\n\n",
 		LPM_PTS(tmp_reg),
 		(tmp_reg & LPM_STS) ? 1 : 0,
-		({
-			char	*s;
-			switch (LPM_PSPD(tmp_reg)) {
-			case LPM_SPEED_FULL:
-				s = "Full Speed"; break;
-			case LPM_SPEED_LOW:
-				s = "Low Speed"; break;
-			case LPM_SPEED_HIGH:
-				s = "High Speed"; break;
-			default:
-				s = "Unknown Speed"; break;
-			}
-			s;
-		}),
+		usb_speed_string(lpm_device_speed(tmp_reg)),
 		(tmp_reg & LPM_PFSC) ? "Force Full Speed" : "Not Force",
 		(tmp_reg & LPM_PHCD) ? "Disabled" : "Enabled",
 		LPM_BA(tmp_reg));
@@ -2647,12 +2634,24 @@ done:
 	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
 }
 
+static inline enum usb_device_speed lpm_device_speed(u32 reg)
+{
+	switch (LPM_PSPD(reg)) {
+	case LPM_SPEED_HIGH:
+		return USB_SPEED_HIGH;
+	case LPM_SPEED_FULL:
+		return USB_SPEED_FULL;
+	case LPM_SPEED_LOW:
+		return USB_SPEED_LOW;
+	default:
+		return USB_SPEED_UNKNOWN;
+	}
+}
 
 /* port change detect interrupt handler */
 static void handle_port_change(struct langwell_udc *dev)
 {
 	u32	portsc1, devlc;
-	u32	speed;
 
 	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -2667,24 +2666,9 @@ static void handle_port_change(struct langwell_udc *dev)
 	/* bus reset is finished */
 	if (!(portsc1 & PORTS_PR)) {
 		/* get the speed */
-		speed = LPM_PSPD(devlc);
-		switch (speed) {
-		case LPM_SPEED_HIGH:
-			dev->gadget.speed = USB_SPEED_HIGH;
-			break;
-		case LPM_SPEED_FULL:
-			dev->gadget.speed = USB_SPEED_FULL;
-			break;
-		case LPM_SPEED_LOW:
-			dev->gadget.speed = USB_SPEED_LOW;
-			break;
-		default:
-			dev->gadget.speed = USB_SPEED_UNKNOWN;
-			break;
-		}
-		dev_vdbg(&dev->pdev->dev,
-				"speed = %d, dev->gadget.speed = %d\n",
-				speed, dev->gadget.speed);
+		dev->gadget.speed = lpm_device_speed(devlc);
+		dev_vdbg(&dev->pdev->dev, "dev->gadget.speed = %d\n",
+			dev->gadget.speed);
 	}
 
 	/* LPM L0 to L1 */
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index 6fef1c02448e..08a4a36550d2 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -1764,8 +1764,8 @@ net2272_handle_stat0_irqs(struct net2272 *dev, u8 stat)
 				dev->gadget.speed = USB_SPEED_HIGH;
 			else
 				dev->gadget.speed = USB_SPEED_FULL;
-			dev_dbg(dev->dev, "%s speed\n",
-				(dev->gadget.speed == USB_SPEED_HIGH) ? "high" : "full");
+			dev_dbg(dev->dev, "%s\n",
+				usb_speed_string(dev->gadget.speed));
 		}
 
 		ep = &dev->ep[0];
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3c14c4ea8efd..db508d0bb3af 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2257,9 +2257,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 			else
 				dev->gadget.speed = USB_SPEED_FULL;
 			net2280_led_speed (dev, dev->gadget.speed);
-			DEBUG (dev, "%s speed\n",
-				(dev->gadget.speed == USB_SPEED_HIGH)
-					? "high" : "full");
+			DEBUG(dev, "%s\n", usb_speed_string(dev->gadget.speed));
 		}
 
 		ep = &dev->ep [0];
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 5d3e697b7d5d..68a0efbc2719 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -962,23 +962,15 @@ printer_set_config(struct printer_dev *dev, unsigned number)
 		usb_gadget_vbus_draw(dev->gadget,
 				dev->gadget->is_otg ? 8 : 100);
 	} else {
-		char *speed;
 		unsigned power;
 
 		power = 2 * config_desc.bMaxPower;
 		usb_gadget_vbus_draw(dev->gadget, power);
 
-		switch (gadget->speed) {
-		case USB_SPEED_FULL:	speed = "full"; break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-		case USB_SPEED_HIGH:	speed = "high"; break;
-#endif
-		default:		speed = "?"; break;
-		}
-
 		dev->config = number;
-		INFO(dev, "%s speed config #%d: %d mA, %s\n",
-				speed, number, power, driver_desc);
+		INFO(dev, "%s config #%d: %d mA, %s\n",
+		     usb_speed_string(gadget->speed),
+		     number, power, driver_desc);
 	}
 	return result;
 }
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 39b134dec94c..a552453dc946 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -1951,30 +1951,26 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
 	case S3C_DSTS_EnumSpd_FS:
 	case S3C_DSTS_EnumSpd_FS48:
 		hsotg->gadget.speed = USB_SPEED_FULL;
-		dev_info(hsotg->dev, "new device is full-speed\n");
-
 		ep0_mps = EP0_MPS_LIMIT;
 		ep_mps = 64;
 		break;
 
 	case S3C_DSTS_EnumSpd_HS:
-		dev_info(hsotg->dev, "new device is high-speed\n");
 		hsotg->gadget.speed = USB_SPEED_HIGH;
-
 		ep0_mps = EP0_MPS_LIMIT;
 		ep_mps = 512;
 		break;
 
 	case S3C_DSTS_EnumSpd_LS:
 		hsotg->gadget.speed = USB_SPEED_LOW;
-		dev_info(hsotg->dev, "new device is low-speed\n");
-
 		/* note, we don't actually support LS in this driver at the
 		 * moment, and the documentation seems to imply that it isn't
 		 * supported by the PHYs on some of the devices.
 		 */
 		break;
 	}
+	dev_info(hsotg->dev, "new device is %s\n",
+		 usb_speed_string(hsotg->gadget.speed));
 
 	/* we should now know the maximum packet size for an
 	 * endpoint, so set the endpoints to a default value. */
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index 05ba47214361..5e77a46a429a 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -375,23 +375,8 @@ static ssize_t usb_udc_speed_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-	struct usb_gadget	*gadget = udc->gadget;
-
-	switch (gadget->speed) {
-	case USB_SPEED_LOW:
-		return snprintf(buf, PAGE_SIZE, "low-speed\n");
-	case USB_SPEED_FULL:
-		return snprintf(buf, PAGE_SIZE, "full-speed\n");
-	case USB_SPEED_HIGH:
-		return snprintf(buf, PAGE_SIZE, "high-speed\n");
-	case USB_SPEED_WIRELESS:
-		return snprintf(buf, PAGE_SIZE, "wireless\n");
-	case USB_SPEED_SUPER:
-		return snprintf(buf, PAGE_SIZE, "super-speed\n");
-	case USB_SPEED_UNKNOWN:	/* FALLTHROUGH */
-	default:
-		return snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
-	}
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			usb_speed_string(udc->gadget->speed));
 }
 static DEVICE_ATTR(speed, S_IRUSR, usb_udc_speed_show, NULL);