Merge 4.12-rc5 into staging-next

We want the IIO fixes and other staging driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 files changed, 37 insertions, 19 deletions

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 09a65a3ec7f7..68fd045a7025 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -47,6 +47,7 @@
 /*
  * These are definitions for the Exar XR17V35X and XR17(C|D)15X
  */
+#define UART_EXAR_INT0		0x80
 #define UART_EXAR_SLEEP		0x8b	/* Sleep mode */
 #define UART_EXAR_DVID		0x8d	/* Device identification */
 
@@ -1337,7 +1338,7 @@ out_lock:
 	/*
 	 * Check if the device is a Fintek F81216A
 	 */
-	if (port->type == PORT_16550A)
+	if (port->type == PORT_16550A && port->iotype == UPIO_PORT)
 		fintek_8250_probe(up);
 
 	if (up->capabilities != old_capabilities) {
@@ -1869,17 +1870,13 @@ static int serial8250_default_handle_irq(struct uart_port *port)
 static int exar_handle_irq(struct uart_port *port)
 {
 	unsigned int iir = serial_port_in(port, UART_IIR);
-	int ret;
+	int ret = 0;
 
-	ret = serial8250_handle_irq(port, iir);
+	if (((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X)) &&
+	    serial_port_in(port, UART_EXAR_INT0) != 0)
+		ret = 1;
 
-	if ((port->type == PORT_XR17V35X) ||
-	   (port->type == PORT_XR17D15X)) {
-		serial_port_in(port, 0x80);
-		serial_port_in(port, 0x81);
-		serial_port_in(port, 0x82);
-		serial_port_in(port, 0x83);
-	}
+	ret |= serial8250_handle_irq(port, iir);
 
 	return ret;
 }
@@ -2177,6 +2174,8 @@ int serial8250_do_startup(struct uart_port *port)
 	serial_port_in(port, UART_RX);
 	serial_port_in(port, UART_IIR);
 	serial_port_in(port, UART_MSR);
+	if ((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X))
+		serial_port_in(port, UART_EXAR_INT0);
 
 	/*
 	 * At this point, there's no way the LSR could still be 0xff;
@@ -2335,6 +2334,8 @@ dont_test_tx_en:
 	serial_port_in(port, UART_RX);
 	serial_port_in(port, UART_IIR);
 	serial_port_in(port, UART_MSR);
+	if ((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X))
+		serial_port_in(port, UART_EXAR_INT0);
 	up->lsr_saved_flags = 0;
 	up->msr_saved_flags = 0;
 
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index 18e3f8342b85..0475f5d261ce 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -478,6 +478,7 @@ static int altera_jtaguart_remove(struct platform_device *pdev)
 
 	port = &altera_jtaguart_ports[i].port;
 	uart_remove_one_port(&altera_jtaguart_driver, port);
+	iounmap(port->membase);
 
 	return 0;
 }
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 46d3438a0d27..3e4b717670d7 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -615,6 +615,7 @@ static int altera_uart_remove(struct platform_device *pdev)
 	if (port) {
 		uart_remove_one_port(&altera_uart_driver, port);
 		port->mapbase = 0;
+		iounmap(port->membase);
 	}
 
 	return 0;
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index ebd8569f9ad5..9fff25be87f9 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -27,6 +27,7 @@
 #define UARTn_FRAME		0x04
 #define UARTn_FRAME_DATABITS__MASK	0x000f
 #define UARTn_FRAME_DATABITS(n)		((n) - 3)
+#define UARTn_FRAME_PARITY__MASK	0x0300
 #define UARTn_FRAME_PARITY_NONE		0x0000
 #define UARTn_FRAME_PARITY_EVEN		0x0200
 #define UARTn_FRAME_PARITY_ODD		0x0300
@@ -572,12 +573,16 @@ static void efm32_uart_console_get_options(struct efm32_uart_port *efm_port,
 			16 * (4 + (clkdiv >> 6)));
 
 	frame = efm32_uart_read32(efm_port, UARTn_FRAME);
-	if (frame & UARTn_FRAME_PARITY_ODD)
+	switch (frame & UARTn_FRAME_PARITY__MASK) {
+	case UARTn_FRAME_PARITY_ODD:
 		*parity = 'o';
-	else if (frame & UARTn_FRAME_PARITY_EVEN)
+		break;
+	case UARTn_FRAME_PARITY_EVEN:
 		*parity = 'e';
-	else
+		break;
+	default:
 		*parity = 'n';
+	}
 
 	*bits = (frame & UARTn_FRAME_DATABITS__MASK) -
 			UARTn_FRAME_DATABITS(4) + 4;
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 157883653256..f190a84a0246 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1382,9 +1382,9 @@ static struct spi_driver ifx_spi_driver = {
 static void __exit ifx_spi_exit(void)
 {
 	/* unregister */
+	spi_unregister_driver(&ifx_spi_driver);
 	tty_unregister_driver(tty_drv);
 	put_tty_driver(tty_drv);
-	spi_unregister_driver(&ifx_spi_driver);
 	unregister_reboot_notifier(&ifx_modem_reboot_notifier_block);
 }
 
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 33509b4beaec..bbefddd92bfe 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2184,7 +2184,9 @@ static int serial_imx_probe(struct platform_device *pdev)
 		 * and DCD (when they are outputs) or enables the respective
 		 * irqs. So set this bit early, i.e. before requesting irqs.
 		 */
-		writel(UFCR_DCEDTE, sport->port.membase + UFCR);
+		reg = readl(sport->port.membase + UFCR);
+		if (!(reg & UFCR_DCEDTE))
+			writel(reg | UFCR_DCEDTE, sport->port.membase + UFCR);
 
 		/*
 		 * Disable UCR3_RI and UCR3_DCD irqs. They are also not
@@ -2195,7 +2197,15 @@ static int serial_imx_probe(struct platform_device *pdev)
 		       sport->port.membase + UCR3);
 
 	} else {
-		writel(0, sport->port.membase + UFCR);
+		unsigned long ucr3 = UCR3_DSR;
+
+		reg = readl(sport->port.membase + UFCR);
+		if (reg & UFCR_DCEDTE)
+			writel(reg & ~UFCR_DCEDTE, sport->port.membase + UFCR);
+
+		if (!is_imx1_uart(sport))
+			ucr3 |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP;
+		writel(ucr3, sport->port.membase + UCR3);
 	}
 
 	clk_disable_unprepare(sport->clk_ipg);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 0f45b7884a2c..13bfd5dcffce 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2083,7 +2083,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 	mutex_lock(&port->mutex);
 
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
-	if (device_may_wakeup(tty_dev)) {
+	if (tty_dev && device_may_wakeup(tty_dev)) {
 		if (!enable_irq_wake(uport->irq))
 			uport->irq_wake = 1;
 		put_device(tty_dev);
@@ -2782,7 +2782,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 	 * Register the port whether it's detected or not.  This allows
 	 * setserial to be used to alter this port's parameters.
 	 */
-	tty_dev = tty_port_register_device_attr(port, drv->tty_driver,
+	tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver,
 			uport->line, uport->dev, port, uport->tty_groups);
 	if (likely(!IS_ERR(tty_dev))) {
 		device_set_wakeup_capable(tty_dev, 1);
@@ -2845,7 +2845,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
 	/*
 	 * Remove the devices from the tty layer
 	 */
-	tty_unregister_device(drv->tty_driver, uport->line);
+	tty_port_unregister_device(port, drv->tty_driver, uport->line);
 
 	tty = tty_port_tty_get(port);
 	if (tty) {