Merge tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/staging driver updates from Greg KH:
 "Here is the big tty/serial driver update for 4.16-rc1.

  The usual number of various serial driver fixes and updates to try to
  get them to work with crazy hardware configurations (seriously, how
  many different ways are hardware engineers going to come up with to
  hook up a simple UART?)

  There is also some serdev bugfixes and updates, as well as a
  smattering of other small fixes in here.

  All have been in the linux-next tree for a while, with no reported
  issues"

* tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
  tty: serial: exar: Relocate sleep wake-up handling
  tty: fix data race between tty_init_dev and flush of buf
  serial: imx: fix endless loop during suspend
  serial: core: mark port as initialized after successful IRQ change
  serdev: only match serdev devices
  serdev: do not generate modaliases for controllers
  serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction
  serial: 8250_dw: Revert "Improve clock rate setting"
  MAINTAINERS: Add myself as designated reviewer for 8250_dw
  gpio: serial: max310x: Support open-drain configuration for GPIOs
  serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers
  serial: 8250_ingenic: Parse earlycon options
  serial: 8250_ingenic: Add support for the JZ4770 SoC
  serial: core: Make uart_parse_options take const char* argument
  serial: 8250_of: fix return code when probe function fails to get reset
  serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS
  serial: 8250_uniphier: fix error return code in uniphier_uart_probe()
  tty: n_gsm: Allow ADM response in addition to UA for control dlci
  tty: omap-serial: Fix initial on-boot RTS GPIO level
  tty: serial: jsm: Add one check against NULL pointer dereference
  ...

1 files changed, 10 insertions, 8 deletions

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 53d59e9b944a..6420ae581a80 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1602,7 +1602,6 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 				   struct device_node *np)
 {
 	struct serial_rs485 *rs485conf = &up->port.rs485;
-	enum of_gpio_flags flags;
 	int ret;
 
 	rs485conf->flags = 0;
@@ -1611,19 +1610,24 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 	if (!np)
 		return 0;
 
-	if (of_property_read_bool(np, "rs485-rts-active-high"))
+	uart_get_rs485_mode(up->dev, rs485conf);
+
+	if (of_property_read_bool(np, "rs485-rts-active-high")) {
 		rs485conf->flags |= SER_RS485_RTS_ON_SEND;
-	else
+		rs485conf->flags &= ~SER_RS485_RTS_AFTER_SEND;
+	} else {
+		rs485conf->flags &= ~SER_RS485_RTS_ON_SEND;
 		rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
+	}
 
 	/* check for tx enable gpio */
-	up->rts_gpio = of_get_named_gpio_flags(np, "rts-gpio", 0, &flags);
+	up->rts_gpio = of_get_named_gpio(np, "rts-gpio", 0);
 	if (gpio_is_valid(up->rts_gpio)) {
 		ret = devm_gpio_request(up->dev, up->rts_gpio, "omap-serial");
 		if (ret < 0)
 			return ret;
-		ret = gpio_direction_output(up->rts_gpio,
-					    flags & SER_RS485_RTS_AFTER_SEND);
+		ret = rs485conf->flags & SER_RS485_RTS_AFTER_SEND ? 1 : 0;
+		ret = gpio_direction_output(up->rts_gpio, ret);
 		if (ret < 0)
 			return ret;
 	} else if (up->rts_gpio == -EPROBE_DEFER) {
@@ -1632,8 +1636,6 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
 		up->rts_gpio = -EINVAL;
 	}
 
-	of_get_rs485_mode(np, rs485conf);
-
 	return 0;
 }