Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 4.6-rc1.

  Lots of little things here, over 1600 patches or so.  Notable is all
  of the good Lustre work happening, those developers have finally woken
  up and are cleaning up their code greatly.  The Outreachy intern
  application process is also happening, which brought in another 400 or
  so patches.  Full details are in the very long shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
  staging: lustre: fix aligments in lnet selftest
  staging: lustre: report minimum of two buffers for LNet selftest load test
  staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
  staging: lustre: filter remaining extra spacing for lnet selftest
  staging: lustre: remove extra spacing when setting variable for lnet selftest
  staging: lustre: remove extra spacing of variable declartions for lnet selftest
  staging: lustre: fix spacing issues checkpatch reported in lnet selftest
  staging: lustre: remove returns in void function for lnet selftest
  staging: lustre: fix bogus lst errors for lnet selftest
  staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
  staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
  staging: android: ion: fix up file mode
  staging: ion: debugfs invalid gfp mask
  staging: rts5208: Replace pci_enable_device with pcim_enable_device
  Staging: ieee80211: Place constant on right side of the test.
  staging: speakup: Replace del_timer with del_timer_sync
  staging: lowmemorykiller: fix 2 checks that checkpatch complained
  staging: mt29f_spinand: Drop void pointer cast
  staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
  staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
  ...

27 files changed, 988 insertions, 590 deletions

diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
index 883ff5b8fdab..6f5e82464d78 100644
--- a/drivers/staging/fbtft/Kconfig
+++ b/drivers/staging/fbtft/Kconfig
@@ -117,12 +117,24 @@ config FB_TFT_SSD1289
 	help
 	  Framebuffer support for SSD1289
 
+config FB_TFT_SSD1305
+        tristate "FB driver for the SSD1305 OLED Controller"
+        depends on FB_TFT
+        help
+          Framebuffer support for SSD1305
+
 config FB_TFT_SSD1306
 	tristate "FB driver for the SSD1306 OLED Controller"
 	depends on FB_TFT
 	help
 	  Framebuffer support for SSD1306
 
+config FB_TFT_SSD1325
+        tristate "FB driver for the SSD1325 OLED Controller"
+        depends on FB_TFT
+        help
+          Framebuffer support for SSD1305
+
 config FB_TFT_SSD1331
 	tristate "FB driver for the SSD1331 LCD Controller"
 	depends on FB_TFT
diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile
index 4f9071d96d01..2725ea9a4afc 100644
--- a/drivers/staging/fbtft/Makefile
+++ b/drivers/staging/fbtft/Makefile
@@ -21,7 +21,9 @@ obj-$(CONFIG_FB_TFT_RA8875)      += fb_ra8875.o
 obj-$(CONFIG_FB_TFT_S6D02A1)     += fb_s6d02a1.o
 obj-$(CONFIG_FB_TFT_S6D1121)     += fb_s6d1121.o
 obj-$(CONFIG_FB_TFT_SSD1289)     += fb_ssd1289.o
+obj-$(CONFIG_FB_TFT_SSD1305)     += fb_ssd1305.o
 obj-$(CONFIG_FB_TFT_SSD1306)     += fb_ssd1306.o
+obj-$(CONFIG_FB_TFT_SSD1305)     += fb_ssd1325.o
 obj-$(CONFIG_FB_TFT_SSD1331)     += fb_ssd1331.o
 obj-$(CONFIG_FB_TFT_SSD1351)     += fb_ssd1351.o
 obj-$(CONFIG_FB_TFT_ST7735R)     += fb_st7735r.o
diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c
index 2a50cf957101..ba9fc444b848 100644
--- a/drivers/staging/fbtft/fb_agm1264k-fl.c
+++ b/drivers/staging/fbtft/fb_agm1264k-fl.c
@@ -272,8 +272,8 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 	int ret = 0;
 
 	/* buffer to convert RGB565 -> grayscale16 -> Dithered image 1bpp */
-	signed short *convert_buf = kmalloc(par->info->var.xres *
-		par->info->var.yres * sizeof(signed short), GFP_NOIO);
+	signed short *convert_buf = kmalloc_array(par->info->var.xres *
+		par->info->var.yres, sizeof(signed short), GFP_NOIO);
 
 	if (!convert_buf)
 		return -ENOMEM;
diff --git a/drivers/staging/fbtft/fb_hx8340bn.c b/drivers/staging/fbtft/fb_hx8340bn.c
index e1ed177f9184..9970ed74bb38 100644
--- a/drivers/staging/fbtft/fb_hx8340bn.c
+++ b/drivers/staging/fbtft/fb_hx8340bn.c
@@ -25,6 +25,7 @@
 #include <linux/vmalloc.h>
 #include <linux/spi/spi.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -45,56 +46,70 @@ static int init_display(struct fbtft_par *par)
 
 	/* BTL221722-276L startup sequence, from datasheet */
 
-	/* SETEXTCOM: Set extended command set (C1h)
-	   This command is used to set extended command set access enable.
-	   Enable: After command (C1h), must write: ffh,83h,40h */
+	/*
+	 * SETEXTCOM: Set extended command set (C1h)
+	 * This command is used to set extended command set access enable.
+	 * Enable: After command (C1h), must write: ffh,83h,40h
+	 */
 	write_reg(par, 0xC1, 0xFF, 0x83, 0x40);
 
-	/* Sleep out
-	   This command turns off sleep mode.
-	   In this mode the DC/DC converter is enabled, Internal oscillator
-	   is started, and panel scanning is started. */
+	/*
+	 * Sleep out
+	 * This command turns off sleep mode.
+	 * In this mode the DC/DC converter is enabled, Internal oscillator
+	 * is started, and panel scanning is started.
+	 */
 	write_reg(par, 0x11);
 	mdelay(150);
 
 	/* Undoc'd register? */
 	write_reg(par, 0xCA, 0x70, 0x00, 0xD9);
 
-	/* SETOSC: Set Internal Oscillator (B0h)
-	   This command is used to set internal oscillator related settings */
-	/*	OSC_EN: Enable internal oscillator */
-	/*	Internal oscillator frequency: 125% x 2.52MHz */
+	/*
+	 * SETOSC: Set Internal Oscillator (B0h)
+	 * This command is used to set internal oscillator related settings
+	 *	OSC_EN: Enable internal oscillator
+	 *	Internal oscillator frequency: 125% x 2.52MHz
+	 */
 	write_reg(par, 0xB0, 0x01, 0x11);
 
 	/* Drive ability setting */
 	write_reg(par, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06);
 	mdelay(20);
 
-	/* SETPWCTR5: Set Power Control 5(B5h)
-	   This command is used to set VCOM Low and VCOM High Voltage */
-	/* VCOMH 0110101 :  3.925 */
-	/* VCOML 0100000 : -1.700 */
-	/* 45h=69  VCOMH: "VMH" + 5d   VCOML: "VMH" + 5d */
+	/*
+	 * SETPWCTR5: Set Power Control 5(B5h)
+	 * This command is used to set VCOM Low and VCOM High Voltage
+	 * VCOMH 0110101 :  3.925
+	 * VCOML 0100000 : -1.700
+	 * 45h=69  VCOMH: "VMH" + 5d   VCOML: "VMH" + 5d
+	 */
 	write_reg(par, 0xB5, 0x35, 0x20, 0x45);
 
-	/* SETPWCTR4: Set Power Control 4(B4h)
-		VRH[4:0]:	Specify the VREG1 voltage adjusting.
-				VREG1 voltage is for gamma voltage setting.
-		BT[2:0]:	Switch the output factor of step-up circuit 2
-				for VGH and VGL voltage generation. */
+	/*
+	 * SETPWCTR4: Set Power Control 4(B4h)
+	 *	VRH[4:0]:	Specify the VREG1 voltage adjusting.
+	 *			VREG1 voltage is for gamma voltage setting.
+	 *	BT[2:0]:	Switch the output factor of step-up circuit 2
+	 *			for VGH and VGL voltage generation.
+	 */
 	write_reg(par, 0xB4, 0x33, 0x25, 0x4C);
 	mdelay(10);
 
-	/* Interface Pixel Format (3Ah)
-	   This command is used to define the format of RGB picture data,
-	   which is to be transfer via the system and RGB interface. */
-	/* RGB interface: 16 Bit/Pixel	*/
-	write_reg(par, 0x3A, 0x05);
-
-	/* Display on (29h)
-	   This command is used to recover from DISPLAY OFF mode.
-	   Output from the Frame Memory is enabled. */
-	write_reg(par, 0x29);
+	/*
+	 * Interface Pixel Format (3Ah)
+	 * This command is used to define the format of RGB picture data,
+	 * which is to be transfer via the system and RGB interface.
+	 * RGB interface: 16 Bit/Pixel
+	 */
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
+
+	/*
+	 * Display on (29h)
+	 * This command is used to recover from DISPLAY OFF mode.
+	 * Output from the Frame Memory is enabled.
+	 */
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 	mdelay(10);
 
 	return 0;
@@ -102,9 +117,9 @@ static int init_display(struct fbtft_par *par)
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	write_reg(par, FBTFT_CASET, 0x00, xs, 0x00, xe);
-	write_reg(par, FBTFT_RASET, 0x00, ys, 0x00, ye);
-	write_reg(par, FBTFT_RAMWR);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, xs, 0x00, xe);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, ys, 0x00, ye);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 static int set_var(struct fbtft_par *par)
@@ -116,16 +131,19 @@ static int set_var(struct fbtft_par *par)
 #define MV BIT(5)
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, par->bgr << 3);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, par->bgr << 3);
 		break;
 	case 270:
-		write_reg(par, 0x36, MX | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MV | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, MX | MY | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MY | (par->bgr << 3));
 		break;
 	case 90:
-		write_reg(par, 0x36, MY | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MY | MV | (par->bgr << 3));
 		break;
 	}
 
@@ -133,12 +151,12 @@ static int set_var(struct fbtft_par *par)
 }
 
 /*
-  Gamma Curve selection, GC (only GC0 can be customized):
-    0 = 2.2, 1 = 1.8, 2 = 2.5, 3 = 1.0
-  Gamma string format:
-    OP0 OP1 CP0 CP1 CP2 CP3 CP4 MP0 MP1 MP2 MP3 MP4 MP5 CGM0 CGM1
-    ON0 ON1 CN0 CN1 CN2 CN3 CN4 MN0 MN1 MN2 MN3 MN4 MN5 XXXX  GC
-*/
+ * Gamma Curve selection, GC (only GC0 can be customized):
+ *   0 = 2.2, 1 = 1.8, 2 = 2.5, 3 = 1.0
+ * Gamma string format:
+ *   OP0 OP1 CP0 CP1 CP2 CP3 CP4 MP0 MP1 MP2 MP3 MP4 MP5 CGM0 CGM1
+ *   ON0 ON1 CN0 CN1 CN2 CN3 CN4 MN0 MN1 MN2 MN3 MN4 MN5 XXXX  GC
+ */
 #define CURVE(num, idx)  curves[num * par->gamma.num_values + idx]
 static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 {
@@ -154,36 +172,38 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 		for (j = 0; j < par->gamma.num_values; j++)
 			CURVE(i, j) &= mask[i * par->gamma.num_values + j];
 
-	write_reg(par, 0x26, 1 << CURVE(1, 14)); /* Gamma Set (26h) */
+	/* Gamma Set (26h) */
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 1 << CURVE(1, 14));
 
 	if (CURVE(1, 14))
 		return 0; /* only GC0 can be customized */
 
 	write_reg(par, 0xC2,
-		(CURVE(0, 8) << 4) | CURVE(0, 7),
-		(CURVE(0, 10) << 4) | CURVE(0, 9),
-		(CURVE(0, 12) << 4) | CURVE(0, 11),
-		CURVE(0, 2),
-		(CURVE(0, 4) << 4) | CURVE(0, 3),
-		CURVE(0, 5),
-		CURVE(0, 6),
-		(CURVE(0, 1) << 4) | CURVE(0, 0),
-		(CURVE(0, 14) << 2) | CURVE(0, 13));
+		  (CURVE(0, 8) << 4) | CURVE(0, 7),
+		  (CURVE(0, 10) << 4) | CURVE(0, 9),
+		  (CURVE(0, 12) << 4) | CURVE(0, 11),
+		  CURVE(0, 2),
+		  (CURVE(0, 4) << 4) | CURVE(0, 3),
+		  CURVE(0, 5),
+		  CURVE(0, 6),
+		  (CURVE(0, 1) << 4) | CURVE(0, 0),
+		  (CURVE(0, 14) << 2) | CURVE(0, 13));
 
 	write_reg(par, 0xC3,
-		(CURVE(1, 8) << 4) | CURVE(1, 7),
-		(CURVE(1, 10) << 4) | CURVE(1, 9),
-		(CURVE(1, 12) << 4) | CURVE(1, 11),
-		CURVE(1, 2),
-		(CURVE(1, 4) << 4) | CURVE(1, 3),
-		CURVE(1, 5),
-		CURVE(1, 6),
-		(CURVE(1, 1) << 4) | CURVE(1, 0));
+		  (CURVE(1, 8) << 4) | CURVE(1, 7),
+		  (CURVE(1, 10) << 4) | CURVE(1, 9),
+		  (CURVE(1, 12) << 4) | CURVE(1, 11),
+		  CURVE(1, 2),
+		  (CURVE(1, 4) << 4) | CURVE(1, 3),
+		  CURVE(1, 5),
+		  CURVE(1, 6),
+		  (CURVE(1, 1) << 4) | CURVE(1, 0));
 
 	mdelay(10);
 
 	return 0;
 }
+
 #undef CURVE
 
 static struct fbtft_display display = {
diff --git a/drivers/staging/fbtft/fb_hx8347d.c b/drivers/staging/fbtft/fb_hx8347d.c
index 6ff76e531a37..450a61e3f99c 100644
--- a/drivers/staging/fbtft/fb_hx8347d.c
+++ b/drivers/staging/fbtft/fb_hx8347d.c
@@ -97,10 +97,10 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 }
 
 /*
-  Gamma string format:
-    VRP0 VRP1 VRP2 VRP3 VRP4 VRP5 PRP0 PRP1 PKP0 PKP1 PKP2 PKP3 PKP4 CGM
-    VRN0 VRN1 VRN2 VRN3 VRN4 VRN5 PRN0 PRN1 PKN0 PKN1 PKN2 PKN3 PKN4 CGM
-*/
+ * Gamma string format:
+ *   VRP0 VRP1 VRP2 VRP3 VRP4 VRP5 PRP0 PRP1 PKP0 PKP1 PKP2 PKP3 PKP4 CGM
+ *   VRN0 VRN1 VRN2 VRN3 VRN4 VRN5 PRN0 PRN1 PKN0 PKN1 PKN2 PKN3 PKN4 CGM
+ */
 #define CURVE(num, idx)  curves[num * par->gamma.num_values + idx]
 static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 {
@@ -140,6 +140,7 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 
 	return 0;
 }
+
 #undef CURVE
 
 static struct fbtft_display display = {
diff --git a/drivers/staging/fbtft/fb_hx8353d.c b/drivers/staging/fbtft/fb_hx8353d.c
index 8552411695fa..72e4ff8c5553 100644
--- a/drivers/staging/fbtft/fb_hx8353d.c
+++ b/drivers/staging/fbtft/fb_hx8353d.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -27,7 +28,6 @@
 
 static int init_display(struct fbtft_par *par)
 {
-
 	par->fbtftops.reset(par);
 	mdelay(150);
 
@@ -47,18 +47,18 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, 0x3A, 0x05);
 
 	/* MEM ACCESS */
-	write_reg(par, 0x36, 0xC0);
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0xC0);
 
 	/* SLPOUT - Sleep out & booster on */
-	write_reg(par, 0x11);
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 	mdelay(150);
 
 	/* DISPON - Display On */
-	write_reg(par, 0x29);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 
 	/* RGBSET */
-	write_reg(par, 0x2D,
-		 0,  2,  4,  6,  8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30,
+	write_reg(par, MIPI_DCS_WRITE_LUT,
+		  0,  2,  4,  6,  8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30,
 		32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62,
 		 0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
 		16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
@@ -87,41 +87,45 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 #define mv BIT(5)
 static int set_var(struct fbtft_par *par)
 {
-	/* madctl - memory data access control
-	     rgb/bgr:
-	     1. mode selection pin srgb
-		rgb h/w pin for color filter setting: 0=rgb, 1=bgr
-	     2. madctl rgb bit
-		rgb-bgr order color filter panel: 0=rgb, 1=bgr */
+	/*
+	 * madctl - memory data access control
+	 *   rgb/bgr:
+	 *   1. mode selection pin srgb
+	 *	rgb h/w pin for color filter setting: 0=rgb, 1=bgr
+	 *   2. madctl rgb bit
+	 *	rgb-bgr order color filter panel: 0=rgb, 1=bgr
+	 */
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, mx | my | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  mx | my | (par->bgr << 3));
 		break;
 	case 270:
-		write_reg(par, 0x36, my | mv | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  my | mv | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, par->bgr << 3);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  par->bgr << 3);
 		break;
 	case 90:
-		write_reg(par, 0x36, mx | mv | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  mx | mv | (par->bgr << 3));
 		break;
 	}
 
 	return 0;
 }
 
-/*
-  gamma string format:
-*/
+/* gamma string format: */
 static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 {
 	write_reg(par, 0xE0,
-		curves[0], curves[1], curves[2], curves[3],
-		curves[4], curves[5], curves[6], curves[7],
-		curves[8], curves[9], curves[10], curves[11],
-		curves[12], curves[13], curves[14], curves[15],
-		curves[16], curves[17], curves[18]);
+		  curves[0], curves[1], curves[2], curves[3],
+		  curves[4], curves[5], curves[6], curves[7],
+		  curves[8], curves[9], curves[10], curves[11],
+		  curves[12], curves[13], curves[14], curves[15],
+		  curves[16], curves[17], curves[18]);
 
 	return 0;
 }
diff --git a/drivers/staging/fbtft/fb_hx8357d.c b/drivers/staging/fbtft/fb_hx8357d.c
index a381dbcf5535..32e6efe1d0a7 100644
--- a/drivers/staging/fbtft/fb_hx8357d.c
+++ b/drivers/staging/fbtft/fb_hx8357d.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 #include "fb_hx8357d.h"
@@ -35,7 +36,7 @@ static int init_display(struct fbtft_par *par)
 	par->fbtftops.reset(par);
 
 	/* Reset things like Gamma */
-	write_reg(par, HX8357B_SWRESET);
+	write_reg(par, MIPI_DCS_SOFT_RESET);
 	usleep_range(5000, 7000);
 
 	/* setextc */
@@ -55,83 +56,83 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, HX8357_SETPANEL, 0x05);
 
 	write_reg(par, HX8357_SETPWR1,
-		0x00,  /* Not deep standby */
-		0x15,  /* BT */
-		0x1C,  /* VSPR */
-		0x1C,  /* VSNR */
-		0x83,  /* AP */
-		0xAA);  /* FS */
+		  0x00,  /* Not deep standby */
+		  0x15,  /* BT */
+		  0x1C,  /* VSPR */
+		  0x1C,  /* VSNR */
+		  0x83,  /* AP */
+		  0xAA);  /* FS */
 
 	write_reg(par, HX8357D_SETSTBA,
-		0x50,  /* OPON normal */
-		0x50,  /* OPON idle */
-		0x01,  /* STBA */
-		0x3C,  /* STBA */
-		0x1E,  /* STBA */
-		0x08);  /* GEN */
+		  0x50,  /* OPON normal */
+		  0x50,  /* OPON idle */
+		  0x01,  /* STBA */
+		  0x3C,  /* STBA */
+		  0x1E,  /* STBA */
+		  0x08);  /* GEN */
 
 	write_reg(par, HX8357D_SETCYC,
-		0x02,  /* NW 0x02 */
-		0x40,  /* RTN */
-		0x00,  /* DIV */
-		0x2A,  /* DUM */
-		0x2A,  /* DUM */
-		0x0D,  /* GDON */
-		0x78);  /* GDOFF */
+		  0x02,  /* NW 0x02 */
+		  0x40,  /* RTN */
+		  0x00,  /* DIV */
+		  0x2A,  /* DUM */
+		  0x2A,  /* DUM */
+		  0x0D,  /* GDON */
+		  0x78);  /* GDOFF */
 
 	write_reg(par, HX8357D_SETGAMMA,
-		0x02,
-		0x0A,
-		0x11,
-		0x1d,
-		0x23,
-		0x35,
-		0x41,
-		0x4b,
-		0x4b,
-		0x42,
-		0x3A,
-		0x27,
-		0x1B,
-		0x08,
-		0x09,
-		0x03,
-		0x02,
-		0x0A,
-		0x11,
-		0x1d,
-		0x23,
-		0x35,
-		0x41,
-		0x4b,
-		0x4b,
-		0x42,
-		0x3A,
-		0x27,
-		0x1B,
-		0x08,
-		0x09,
-		0x03,
-		0x00,
-		0x01);
+		  0x02,
+		  0x0A,
+		  0x11,
+		  0x1d,
+		  0x23,
+		  0x35,
+		  0x41,
+		  0x4b,
+		  0x4b,
+		  0x42,
+		  0x3A,
+		  0x27,
+		  0x1B,
+		  0x08,
+		  0x09,
+		  0x03,
+		  0x02,
+		  0x0A,
+		  0x11,
+		  0x1d,
+		  0x23,
+		  0x35,
+		  0x41,
+		  0x4b,
+		  0x4b,
+		  0x42,
+		  0x3A,
+		  0x27,
+		  0x1B,
+		  0x08,
+		  0x09,
+		  0x03,
+		  0x00,
+		  0x01);
 
 	/* 16 bit */
-	write_reg(par, HX8357_COLMOD, 0x55);
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
 
-	write_reg(par, HX8357_MADCTL, 0xC0);
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0xC0);
 
 	/* TE off */
-	write_reg(par, HX8357_TEON, 0x00);
+	write_reg(par, MIPI_DCS_SET_TEAR_ON, 0x00);
 
 	/* tear line */
-	write_reg(par, HX8357_TEARLINE, 0x00, 0x02);
+	write_reg(par, MIPI_DCS_SET_TEAR_SCANLINE, 0x00, 0x02);
 
 	/* Exit Sleep */
-	write_reg(par, HX8357_SLPOUT);
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 	msleep(150);
 
 	/* display on */
-	write_reg(par, HX8357_DISPON);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 	usleep_range(5000, 7000);
 
 	return 0;
@@ -139,18 +140,15 @@ static int init_display(struct fbtft_par *par)
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column addr set */
-	write_reg(par, HX8357_CASET,
-		xs >> 8, xs & 0xff,  /* XSTART */
-		xe >> 8, xe & 0xff); /* XEND */
-
-	/* Row addr set */
-	write_reg(par, HX8357_PASET,
-		ys >> 8, ys & 0xff,  /* YSTART */
-		ye >> 8, ye & 0xff); /* YEND */
-
-	/* write to RAM */
-	write_reg(par, HX8357_RAMWR);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xff,  /* XSTART */
+		  xe >> 8, xe & 0xff); /* XEND */
+
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xff,  /* YSTART */
+		  ye >> 8, ye & 0xff); /* YEND */
+
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define HX8357D_MADCTL_MY  0x80
@@ -182,7 +180,7 @@ static int set_var(struct fbtft_par *par)
 	val |= (par->bgr ? HX8357D_MADCTL_RGB : HX8357D_MADCTL_BGR);
 
 	/* Memory Access Control */
-	write_reg(par, HX8357_MADCTL, val);
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val);
 
 	return 0;
 }
diff --git a/drivers/staging/fbtft/fb_hx8357d.h b/drivers/staging/fbtft/fb_hx8357d.h
index de05e8cdf04c..e281921d4a97 100644
--- a/drivers/staging/fbtft/fb_hx8357d.h
+++ b/drivers/staging/fbtft/fb_hx8357d.h
@@ -1,17 +1,17 @@
-/***************************************************
-  This is our library for the Adafruit  ILI9341 Breakout and Shield
-  ----> http://www.adafruit.com/products/1651
-
-  Check out the links above for our tutorials and wiring diagrams
-  These displays use SPI to communicate, 4 or 5 pins are required to
-  interface (RST is optional)
-  Adafruit invests time and resources providing this open source code,
-  please support Adafruit and open-source hardware by purchasing
-  products from Adafruit!
-
-  Written by Limor Fried/Ladyada for Adafruit Industries.
-  MIT license, all text above must be included in any redistribution
- ****************************************************/
+/*
+ * This is our library for the Adafruit  ILI9341 Breakout and Shield
+ * ----> http://www.adafruit.com/products/1651
+ *
+ * Check out the links above for our tutorials and wiring diagrams
+ * These displays use SPI to communicate, 4 or 5 pins are required to
+ * interface (RST is optional)
+ * Adafruit invests time and resources providing this open source code,
+ * please support Adafruit and open-source hardware by purchasing
+ * products from Adafruit!
+ *
+ * Written by Limor Fried/Ladyada for Adafruit Industries.
+ * MIT license, all text above must be included in any redistribution
+ */
 
 #ifndef __HX8357_H__
 #define __HX8357_H__
@@ -22,38 +22,6 @@
 #define HX8357_TFTWIDTH  320
 #define HX8357_TFTHEIGHT 480
 
-#define HX8357B_NOP     0x00
-#define HX8357B_SWRESET 0x01
-#define HX8357B_RDDID   0x04
-#define HX8357B_RDDST   0x09
-
-#define HX8357B_RDPOWMODE  0x0A
-#define HX8357B_RDMADCTL  0x0B
-#define HX8357B_RDCOLMOD  0x0C
-#define HX8357B_RDDIM  0x0D
-#define HX8357B_RDDSDR  0x0F
-
-#define HX8357_SLPIN   0x10
-#define HX8357_SLPOUT  0x11
-#define HX8357B_PTLON   0x12
-#define HX8357B_NORON   0x13
-
-#define HX8357_INVOFF  0x20
-#define HX8357_INVON   0x21
-#define HX8357_DISPOFF 0x28
-#define HX8357_DISPON  0x29
-
-#define HX8357_CASET   0x2A
-#define HX8357_PASET   0x2B
-#define HX8357_RAMWR   0x2C
-#define HX8357_RAMRD   0x2E
-
-#define HX8357B_PTLAR   0x30
-#define HX8357_TEON  0x35
-#define HX8357_TEARLINE  0x44
-#define HX8357_MADCTL  0x36
-#define HX8357_COLMOD  0x3A
-
 #define HX8357_SETOSC 0xB0
 #define HX8357_SETPWR1 0xB1
 #define HX8357B_SETDISPLAY 0xB2
diff --git a/drivers/staging/fbtft/fb_ili9163.c b/drivers/staging/fbtft/fb_ili9163.c
index f31b3f4b9275..6b8f8b17e9a3 100644
--- a/drivers/staging/fbtft/fb_ili9163.c
+++ b/drivers/staging/fbtft/fb_ili9163.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -38,37 +39,11 @@
 #endif
 
 /* ILI9163C commands */
-#define CMD_NOP		0x00 /* Non operation*/
-#define CMD_SWRESET	0x01 /* Soft Reset */
-#define CMD_SLPIN	0x10 /* Sleep ON */
-#define CMD_SLPOUT	0x11 /* Sleep OFF */
-#define CMD_PTLON	0x12 /* Partial Mode ON */
-#define CMD_NORML	0x13 /* Normal Display ON */
-#define CMD_DINVOF	0x20 /* Display Inversion OFF */
-#define CMD_DINVON	0x21 /* Display Inversion ON */
-#define CMD_GAMMASET	0x26 /* Gamma Set (0x01[1],0x02[2],0x04[3],0x08[4]) */
-#define CMD_DISPOFF	0x28 /* Display OFF */
-#define CMD_DISPON	0x29 /* Display ON */
-#define CMD_IDLEON	0x39 /* Idle Mode ON */
-#define CMD_IDLEOF	0x38 /* Idle Mode OFF */
-#define CMD_CLMADRS	0x2A /* Column Address Set */
-#define CMD_PGEADRS	0x2B /* Page Address Set */
-
-#define CMD_RAMWR	0x2C /* Memory Write */
-#define CMD_RAMRD	0x2E /* Memory Read */
-#define CMD_CLRSPACE	0x2D /* Color Space : 4K/65K/262K */
-#define CMD_PARTAREA	0x30 /* Partial Area */
-#define CMD_VSCLLDEF	0x33 /* Vertical Scroll Definition */
-#define CMD_TEFXLON	0x34 /* Tearing Effect Line ON */
-#define CMD_TEFXLOF	0x35 /* Tearing Effect Line OFF */
-#define CMD_MADCTL	0x36 /* Memory Access Control */
-
-#define CMD_PIXFMT	0x3A /* Interface Pixel Format */
-#define CMD_FRMCTR1	0xB1 /* Frame Rate Control
-				(In normal mode/Full colors) */
+#define CMD_FRMCTR1	0xB1 /* Frame Rate Control */
+			     /*	(In normal mode/Full colors) */
 #define CMD_FRMCTR2	0xB2 /* Frame Rate Control (In Idle mode/8-colors) */
-#define CMD_FRMCTR3	0xB3 /* Frame Rate Control
-				(In Partial mode/full colors) */
+#define CMD_FRMCTR3	0xB3 /* Frame Rate Control */
+			     /*	(In Partial mode/full colors) */
 #define CMD_DINVCTR	0xB4 /* Display Inversion Control */
 #define CMD_RGBBLK	0xB5 /* RGB Interface Blanking Porch setting */
 #define CMD_DFUNCTR	0xB6 /* Display Function set 5 */
@@ -88,17 +63,18 @@
 #define CMD_GAMRSEL	0xF2 /* GAM_R_SEL */
 
 /*
-This display:
-http://www.ebay.com/itm/Replace-Nokia-5110-LCD-1-44-Red-Serial-128X128-SPI-Color-TFT-LCD-Display-Module-/271422122271
-This particular display has a design error! The controller has 3 pins to
-configure to constrain the memory and resolution to a fixed dimension (in
-that case 128x128) but they leaved those pins configured for 128x160 so
-there was several pixel memory addressing problems.
-I solved by setup several parameters that dinamically fix the resolution as
-needit so below the parameters for this display. If you have a strain or a
-correct display (can happen with chinese) you can copy those parameters and
-create setup for different displays.
-*/
+ * This display:
+ * http://www.ebay.com/itm/Replace-Nokia-5110-LCD-1-44-Red-Serial-128X128-SPI-
+ * Color-TFT-LCD-Display-Module-/271422122271
+ * This particular display has a design error! The controller has 3 pins to
+ * configure to constrain the memory and resolution to a fixed dimension (in
+ * that case 128x128) but they leaved those pins configured for 128x160 so
+ * there was several pixel memory addressing problems.
+ * I solved by setup several parameters that dinamically fix the resolution as
+ * needit so below the parameters for this display. If you have a strain or a
+ * correct display (can happen with chinese) you can copy those parameters and
+ * create setup for different displays.
+ */
 
 #ifdef RED
 #define __OFFSET		32 /*see note 2 - this is the red version */
@@ -113,16 +89,17 @@ static int init_display(struct fbtft_par *par)
 	if (par->gpio.cs != -1)
 		gpio_set_value(par->gpio.cs, 0);  /* Activate chip */
 
-	write_reg(par, CMD_SWRESET); /* software reset */
+	write_reg(par, MIPI_DCS_SOFT_RESET); /* software reset */
 	mdelay(500);
-	write_reg(par, CMD_SLPOUT); /* exit sleep */
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); /* exit sleep */
 	mdelay(5);
-	write_reg(par, CMD_PIXFMT, 0x05); /* Set Color Format 16bit */
-	write_reg(par, CMD_GAMMASET, 0x02); /* default gamma curve 3 */
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
+	/* default gamma curve 3 */
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x02);
 #ifdef GAMMA_ADJ
 	write_reg(par, CMD_GAMRSEL, 0x01); /* Enable Gamma adj */
 #endif
-	write_reg(par, CMD_NORML);
+	write_reg(par, MIPI_DCS_ENTER_NORMAL_MODE);
 	write_reg(par, CMD_DFUNCTR, 0xff, 0x06);
 	/* Frame Rate Control (In normal mode/Full colors) */
 	write_reg(par, CMD_FRMCTR1, 0x08, 0x02);
@@ -135,66 +112,67 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, CMD_VCOMCTR1, 0x50, 0x63);
 	write_reg(par, CMD_VCOMOFFS, 0);
 
-	write_reg(par, CMD_CLMADRS, 0, 0, 0, WIDTH); /* Set Column Address */
-	write_reg(par, CMD_PGEADRS, 0, 0, 0, HEIGHT); /* Set Page Address */
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, 0, 0, 0, WIDTH);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, 0, 0, 0, HEIGHT);
 
-	write_reg(par, CMD_DISPON); /* display ON */
-	write_reg(par, CMD_RAMWR); /* Memory Write */
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON); /* display ON */
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START); /* Memory Write */
 
 	return 0;
 }
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys,
-				int xe, int ye)
+			 int xe, int ye)
 {
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, CMD_CLMADRS, xs >> 8, xs & 0xff, xe >> 8,
-				xe & 0xff);
-		write_reg(par, CMD_PGEADRS,
-				(ys + __OFFSET) >> 8, (ys + __OFFSET) & 0xff,
-				(ye + __OFFSET) >> 8, (ye + __OFFSET) & 0xff);
+		write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+			  xs >> 8, xs & 0xff, xe >> 8, xe & 0xff);
+		write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+			  (ys + __OFFSET) >> 8, (ys + __OFFSET) & 0xff,
+			  (ye + __OFFSET) >> 8, (ye + __OFFSET) & 0xff);
 		break;
 	case 90:
-		write_reg(par, CMD_CLMADRS,
-				(xs + __OFFSET) >> 8, (xs + __OFFSET) & 0xff,
-				(xe + __OFFSET) >> 8, (xe + __OFFSET) & 0xff);
-		write_reg(par, CMD_PGEADRS, ys >> 8, ys & 0xff, ye >> 8,
-				ye & 0xff);
+		write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+			  (xs + __OFFSET) >> 8, (xs + __OFFSET) & 0xff,
+			  (xe + __OFFSET) >> 8, (xe + __OFFSET) & 0xff);
+		write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+			  ys >> 8, ys & 0xff, ye >> 8, ye & 0xff);
 		break;
 	case 180:
 	case 270:
-		write_reg(par, CMD_CLMADRS, xs >> 8, xs & 0xff, xe >> 8,
-				xe & 0xff);
-		write_reg(par, CMD_PGEADRS, ys >> 8, ys & 0xff, ye >> 8,
-				ye & 0xff);
+		write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+			  xs >> 8, xs & 0xff, xe >> 8, xe & 0xff);
+		write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+			  ys >> 8, ys & 0xff, ye >> 8, ye & 0xff);
 		break;
 	default:
-		par->info->var.rotate = 0; /* Fix incorrect setting */
+		/* Fix incorrect setting */
+		par->info->var.rotate = 0;
 	}
-	write_reg(par, CMD_RAMWR); /* Write Data to GRAM mode */
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 /*
-7) MY:  1(bottom to top),	0(top to bottom)    Row Address Order
-6) MX:  1(R to L),		0(L to R)	    Column Address Order
-5) MV:  1(Exchanged),		0(normal)	    Row/Column exchange
-4) ML:  1(bottom to top),	0(top to bottom)    Vertical Refresh Order
-3) RGB: 1(BGR),			0(RGB)		    Color Space
-2) MH:  1(R to L),		0(L to R)	    Horizontal Refresh Order
-1)
-0)
-
-	MY, MX, MV, ML,RGB, MH, D1, D0
-	0 | 0 | 0 | 0 | 1 | 0 | 0 | 0	//normal
-	1 | 0 | 0 | 0 | 1 | 0 | 0 | 0	//Y-Mirror
-	0 | 1 | 0 | 0 | 1 | 0 | 0 | 0	//X-Mirror
-	1 | 1 | 0 | 0 | 1 | 0 | 0 | 0	//X-Y-Mirror
-	0 | 0 | 1 | 0 | 1 | 0 | 0 | 0	//X-Y Exchange
-	1 | 0 | 1 | 0 | 1 | 0 | 0 | 0	//X-Y Exchange, Y-Mirror
-	0 | 1 | 1 | 0 | 1 | 0 | 0 | 0	//XY exchange
-	1 | 1 | 1 | 0 | 1 | 0 | 0 | 0
-*/
+ * 7) MY:  1(bottom to top),	0(top to bottom)    Row Address Order
+ * 6) MX:  1(R to L),		0(L to R)	    Column Address Order
+ * 5) MV:  1(Exchanged),	0(normal)	    Row/Column exchange
+ * 4) ML:  1(bottom to top),	0(top to bottom)    Vertical Refresh Order
+ * 3) RGB: 1(BGR),		0(RGB)		    Color Space
+ * 2) MH:  1(R to L),		0(L to R)	    Horizontal Refresh Order
+ * 1)
+ * 0)
+ *
+ *	MY, MX, MV, ML,RGB, MH, D1, D0
+ *	0 | 0 | 0 | 0 | 1 | 0 | 0 | 0	//normal
+ *	1 | 0 | 0 | 0 | 1 | 0 | 0 | 0	//Y-Mirror
+ *	0 | 1 | 0 | 0 | 1 | 0 | 0 | 0	//X-Mirror
+ *	1 | 1 | 0 | 0 | 1 | 0 | 0 | 0	//X-Y-Mirror
+ *	0 | 0 | 1 | 0 | 1 | 0 | 0 | 0	//X-Y Exchange
+ *	1 | 0 | 1 | 0 | 1 | 0 | 0 | 0	//X-Y Exchange, Y-Mirror
+ *	0 | 1 | 1 | 0 | 1 | 0 | 0 | 0	//XY exchange
+ *	1 | 1 | 1 | 0 | 1 | 0 | 0 | 0
+ */
 static int set_var(struct fbtft_par *par)
 {
 	u8 mactrl_data = 0; /* Avoid compiler warning */
@@ -217,8 +195,8 @@ static int set_var(struct fbtft_par *par)
 	/* Colorspcae */
 	if (par->bgr)
 		mactrl_data |= (1 << 2);
-	write_reg(par, CMD_MADCTL, mactrl_data);
-	write_reg(par, CMD_RAMWR); /* Write Data to GRAM mode */
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, mactrl_data);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 	return 0;
 }
 
@@ -237,27 +215,28 @@ static int gamma_adj(struct fbtft_par *par, unsigned long *curves)
 			CURVE(i, j) &= mask[i * par->gamma.num_values + j];
 
 	write_reg(par, CMD_PGAMMAC,
-				CURVE(0, 0),
-				CURVE(0, 1),
-				CURVE(0, 2),
-				CURVE(0, 3),
-				CURVE(0, 4),
-				CURVE(0, 5),
-				CURVE(0, 6),
-				(CURVE(0, 7) << 4) | CURVE(0, 8),
-				CURVE(0, 9),
-				CURVE(0, 10),
-				CURVE(0, 11),
-				CURVE(0, 12),
-				CURVE(0, 13),
-				CURVE(0, 14),
-				CURVE(0, 15)
-				);
+		  CURVE(0, 0),
+		  CURVE(0, 1),
+		  CURVE(0, 2),
+		  CURVE(0, 3),
+		  CURVE(0, 4),
+		  CURVE(0, 5),
+		  CURVE(0, 6),
+		  (CURVE(0, 7) << 4) | CURVE(0, 8),
+		  CURVE(0, 9),
+		  CURVE(0, 10),
+		  CURVE(0, 11),
+		  CURVE(0, 12),
+		  CURVE(0, 13),
+		  CURVE(0, 14),
+		  CURVE(0, 15));
 
-	write_reg(par, CMD_RAMWR); /* Write Data to GRAM mode */
+	/* Write Data to GRAM mode */
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 
 	return 0;
 }
+
 #undef CURVE
 #endif
 
diff --git a/drivers/staging/fbtft/fb_ili9320.c b/drivers/staging/fbtft/fb_ili9320.c
index 3ed50febe36f..6ff222d6d6d6 100644
--- a/drivers/staging/fbtft/fb_ili9320.c
+++ b/drivers/staging/fbtft/fb_ili9320.c
@@ -47,10 +47,10 @@ static int init_display(struct fbtft_par *par)
 
 	devcode = read_devicecode(par);
 	fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "Device code: 0x%04X\n",
-		devcode);
+		      devcode);
 	if ((devcode != 0x0000) && (devcode != 0x9320))
 		dev_warn(par->info->device,
-			"Unrecognized Device code: 0x%04X (expected 0x9320)\n",
+			 "Unrecognized Device code: 0x%04X (expected 0x9320)\n",
 			devcode);
 
 	/* Initialization sequence from ILI9320 Application Notes */
@@ -216,10 +216,10 @@ static int set_var(struct fbtft_par *par)
 }
 
 /*
-  Gamma string format:
-    VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5
-    VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5
-*/
+ * Gamma string format:
+ *  VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5
+ *  VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5
+ */
 #define CURVE(num, idx)  curves[num * par->gamma.num_values + idx]
 static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 {
@@ -248,6 +248,7 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 
 	return 0;
 }
+
 #undef CURVE
 
 static struct fbtft_display display = {
diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c
index 3b3a06d8a125..fdf98d37550e 100644
--- a/drivers/staging/fbtft/fb_ili9325.c
+++ b/drivers/staging/fbtft/fb_ili9325.c
@@ -56,42 +56,42 @@ module_param(vcm, uint, 0);
 MODULE_PARM_DESC(vcm, "Set the internal VcomH voltage");
 
 /*
-Verify that this configuration is within the Voltage limits
-
-Display module configuration: Vcc = IOVcc = Vci = 3.3V
-
- Voltages
-----------
-Vci                                =   3.3
-Vci1           =  Vci * 0.80       =   2.64
-DDVDH          =  Vci1 * 2         =   5.28
-VCL            = -Vci1             =  -2.64
-VREG1OUT       =  Vci * 1.85       =   4.88
-VCOMH          =  VREG1OUT * 0.735 =   3.59
-VCOM amplitude =  VREG1OUT * 0.98  =   4.79
-VGH            =  Vci * 4          =  13.2
-VGL            = -Vci * 4          = -13.2
-
- Limits
---------
-Power supplies
-1.65 < IOVcc < 3.30   =>  1.65 < 3.3 < 3.30
-2.40 < Vcc   < 3.30   =>  2.40 < 3.3 < 3.30
-2.50 < Vci   < 3.30   =>  2.50 < 3.3 < 3.30
-
-Source/VCOM power supply voltage
- 4.50 < DDVDH < 6.0   =>  4.50 <  5.28 <  6.0
--3.0  < VCL   < -2.0  =>  -3.0 < -2.64 < -2.0
-VCI - VCL < 6.0       =>  5.94 < 6.0
-
-Gate driver output voltage
- 10  < VGH   < 20     =>   10 <  13.2  < 20
--15  < VGL   < -5     =>  -15 < -13.2  < -5
-VGH - VGL < 32        =>   26.4 < 32
-
-VCOM driver output voltage
-VCOMH - VCOML < 6.0   =>  4.79 < 6.0
-*/
+ * Verify that this configuration is within the Voltage limits
+ *
+ * Display module configuration: Vcc = IOVcc = Vci = 3.3V
+ *
+ * Voltages
+ * ----------
+ * Vci                                =   3.3
+ * Vci1           =  Vci * 0.80       =   2.64
+ * DDVDH          =  Vci1 * 2         =   5.28
+ * VCL            = -Vci1             =  -2.64
+ * VREG1OUT       =  Vci * 1.85       =   4.88
+ * VCOMH          =  VREG1OUT * 0.735 =   3.59
+ * VCOM amplitude =  VREG1OUT * 0.98  =   4.79
+ * VGH            =  Vci * 4          =  13.2
+ * VGL            = -Vci * 4          = -13.2
+ *
+ * Limits
+ * --------
+ * Power supplies
+ * 1.65 < IOVcc < 3.30   =>  1.65 < 3.3 < 3.30
+ * 2.40 < Vcc   < 3.30   =>  2.40 < 3.3 < 3.30
+ * 2.50 < Vci   < 3.30   =>  2.50 < 3.3 < 3.30
+ *
+ * Source/VCOM power supply voltage
+ *  4.50 < DDVDH < 6.0   =>  4.50 <  5.28 <  6.0
+ * -3.0  < VCL   < -2.0  =>  -3.0 < -2.64 < -2.0
+ * VCI - VCL < 6.0       =>  5.94 < 6.0
+ *
+ * Gate driver output voltage
+ *  10  < VGH   < 20     =>   10 <  13.2  < 20
+ * -15  < VGL   < -5     =>  -15 < -13.2  < -5
+ * VGH - VGL < 32        =>   26.4 < 32
+ *
+ * VCOM driver output voltage
+ * VCOMH - VCOML < 6.0   =>  4.79 < 6.0
+ */
 
 static int init_display(struct fbtft_par *par)
 {
@@ -213,10 +213,10 @@ static int set_var(struct fbtft_par *par)
 }
 
 /*
-  Gamma string format:
-    VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5
-    VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5
-*/
+ * Gamma string format:
+ *  VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5
+ *  VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5
+ */
 #define CURVE(num, idx)  curves[num * par->gamma.num_values + idx]
 static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 {
@@ -245,6 +245,7 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 
 	return 0;
 }
+
 #undef CURVE
 
 static struct fbtft_display display = {
diff --git a/drivers/staging/fbtft/fb_ili9340.c b/drivers/staging/fbtft/fb_ili9340.c
index e0e253989271..0711121c303c 100644
--- a/drivers/staging/fbtft/fb_ili9340.c
+++ b/drivers/staging/fbtft/fb_ili9340.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -53,7 +54,7 @@ static int init_display(struct fbtft_par *par)
 
 	/* COLMOD: Pixel Format Set */
 	/* 16 bits/pixel */
-	write_reg(par, 0x3A, 0x55);
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
 
 	/* Frame Rate Control */
 	/* Division ratio = fosc, Frame Rate = 79Hz */
@@ -65,40 +66,37 @@ static int init_display(struct fbtft_par *par)
 	/* Gamma Function Disable */
 	write_reg(par, 0xF2, 0x00);
 
-	/* Gamma curve selected  */
-	write_reg(par, 0x26, 0x01);
+	/* Gamma curve selection */
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
 
 	/* Positive Gamma Correction */
 	write_reg(par, 0xE0,
-		0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E, 0xF1,
-		0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00);
+		  0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E, 0xF1,
+		  0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00);
 
 	/* Negative Gamma Correction */
 	write_reg(par, 0xE1,
-		0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1,
-		0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F);
+		  0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1,
+		  0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F);
 
-	/* Sleep OUT */
-	write_reg(par, 0x11);
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 
 	mdelay(120);
 
-	/* Display ON */
-	write_reg(par, 0x29);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 
 	return 0;
 }
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define ILI9340_MADCTL_MV  0x20
@@ -123,7 +121,7 @@ static int set_var(struct fbtft_par *par)
 		break;
 	}
 	/* Memory Access Control  */
-	write_reg(par, 0x36, val | (par->bgr << 3));
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val | (par->bgr << 3));
 
 	return 0;
 }
diff --git a/drivers/staging/fbtft/fb_ili9341.c b/drivers/staging/fbtft/fb_ili9341.c
index dcee0aff5875..ff35c8624ca3 100644
--- a/drivers/staging/fbtft/fb_ili9341.c
+++ b/drivers/staging/fbtft/fb_ili9341.c
@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -39,9 +40,9 @@ static int init_display(struct fbtft_par *par)
 	par->fbtftops.reset(par);
 
 	/* startup sequence for MI0283QT-9A */
-	write_reg(par, 0x01); /* software reset */
+	write_reg(par, MIPI_DCS_SOFT_RESET);
 	mdelay(5);
-	write_reg(par, 0x28); /* display off */
+	write_reg(par, MIPI_DCS_SET_DISPLAY_OFF);
 	/* --------------------------------------------------------- */
 	write_reg(par, 0xCF, 0x00, 0x83, 0x30);
 	write_reg(par, 0xED, 0x64, 0x03, 0x12, 0x81);
@@ -56,18 +57,18 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, 0xC5, 0x35, 0x3E);
 	write_reg(par, 0xC7, 0xBE);
 	/* ------------memory access control------------------------ */
-	write_reg(par, 0x3A, 0x55); /* 16bit pixel */
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); /* 16bit pixel */
 	/* ------------frame rate----------------------------------- */
 	write_reg(par, 0xB1, 0x00, 0x1B);
 	/* ------------Gamma---------------------------------------- */
 	/* write_reg(par, 0xF2, 0x08); */ /* Gamma Function Disable */
-	write_reg(par, 0x26, 0x01);
+	write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
 	/* ------------display-------------------------------------- */
 	write_reg(par, 0xB7, 0x07); /* entry mode set */
 	write_reg(par, 0xB6, 0x0A, 0x82, 0x27, 0x00);
-	write_reg(par, 0x11); /* sleep out */
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 	mdelay(100);
-	write_reg(par, 0x29); /* display on */
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 	mdelay(20);
 
 	return 0;
@@ -75,40 +76,39 @@ static int init_display(struct fbtft_par *par)
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address set */
-	write_reg(par, 0x2A,
-		(xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
 
-	/* Row address set */
-	write_reg(par, 0x2B,
-		(ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
-#define MEM_Y   (7) /* MY row address order */
-#define MEM_X   (6) /* MX column address order */
-#define MEM_V   (5) /* MV row / column exchange */
-#define MEM_L   (4) /* ML vertical refresh order */
-#define MEM_H   (2) /* MH horizontal refresh order */
+#define MEM_Y   BIT(7) /* MY row address order */
+#define MEM_X   BIT(6) /* MX column address order */
+#define MEM_V   BIT(5) /* MV row / column exchange */
+#define MEM_L   BIT(4) /* ML vertical refresh order */
+#define MEM_H   BIT(2) /* MH horizontal refresh order */
 #define MEM_BGR (3) /* RGB-BGR Order */
 static int set_var(struct fbtft_par *par)
 {
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, (1 << MEM_X) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_X | (par->bgr << MEM_BGR));
 		break;
 	case 270:
-		write_reg(par, 0x36,
-			(1 << MEM_V) | (1 << MEM_L) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_V | MEM_L | (par->bgr << MEM_BGR));
 		break;
 	case 180:
-		write_reg(par, 0x36, (1 << MEM_Y) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_Y | (par->bgr << MEM_BGR));
 		break;
 	case 90:
-		write_reg(par, 0x36, (1 << MEM_Y) | (1 << MEM_X) |
-				     (1 << MEM_V) | (par->bgr << MEM_BGR));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MEM_Y | MEM_X | MEM_V | (par->bgr << MEM_BGR));
 		break;
 	}
 
@@ -116,10 +116,10 @@ static int set_var(struct fbtft_par *par)
 }
 
 /*
-  Gamma string format:
-    Positive: Par1 Par2 [...] Par15
-    Negative: Par1 Par2 [...] Par15
-*/
+ * Gamma string format:
+ *  Positive: Par1 Par2 [...] Par15
+ *  Negative: Par1 Par2 [...] Par15
+ */
 #define CURVE(num, idx)  curves[num * par->gamma.num_values + idx]
 static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 {
@@ -127,14 +127,15 @@ static int set_gamma(struct fbtft_par *par, unsigned long *curves)
 
 	for (i = 0; i < par->gamma.num_curves; i++)
 		write_reg(par, 0xE0 + i,
-			CURVE(i, 0), CURVE(i, 1), CURVE(i, 2),
-			CURVE(i, 3), CURVE(i, 4), CURVE(i, 5),
-			CURVE(i, 6), CURVE(i, 7), CURVE(i, 8),
-			CURVE(i, 9), CURVE(i, 10), CURVE(i, 11),
-			CURVE(i, 12), CURVE(i, 13), CURVE(i, 14));
+			  CURVE(i, 0), CURVE(i, 1), CURVE(i, 2),
+			  CURVE(i, 3), CURVE(i, 4), CURVE(i, 5),
+			  CURVE(i, 6), CURVE(i, 7), CURVE(i, 8),
+			  CURVE(i, 9), CURVE(i, 10), CURVE(i, 11),
+			  CURVE(i, 12), CURVE(i, 13), CURVE(i, 14));
 
 	return 0;
 }
+
 #undef CURVE
 
 static struct fbtft_display display = {
diff --git a/drivers/staging/fbtft/fb_ili9481.c b/drivers/staging/fbtft/fb_ili9481.c
index 63684864f309..242adb3859bd 100644
--- a/drivers/staging/fbtft/fb_ili9481.c
+++ b/drivers/staging/fbtft/fb_ili9481.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -27,9 +28,8 @@
 #define HEIGHT		480
 
 static int default_init_sequence[] = {
-
 	/* SLP_OUT - Sleep out */
-	-1, 0x11,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
 	-2, 50,
 	/* Power setting */
 	-1, 0xD0, 0x07, 0x42, 0x18,
@@ -42,44 +42,47 @@ static int default_init_sequence[] = {
 	/* Frame rate & inv. */
 	-1, 0xC5, 0x03,
 	/* Pixel format */
-	-1, 0x3A, 0x55,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
 	/* Gamma */
 	-1, 0xC8, 0x00, 0x32, 0x36, 0x45, 0x06, 0x16,
 		  0x37, 0x75, 0x77, 0x54, 0x0C, 0x00,
 	/* DISP_ON */
-	-1, 0x29,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
 	-3
 };
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* column address */
-	write_reg(par, 0x2a, xs >> 8, xs & 0xff, xe >> 8, xe & 0xff);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xff, xe >> 8, xe & 0xff);
 
-	/* Row address */
-	write_reg(par, 0x2b, ys >> 8, ys & 0xff, ye >> 8, ye & 0xff);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xff, ye >> 8, ye & 0xff);
 
-	/* memory write */
-	write_reg(par, 0x2c);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define HFLIP 0x01
 #define VFLIP 0x02
-#define ROWxCOL 0x20
+#define ROW_X_COL 0x20
 static int set_var(struct fbtft_par *par)
 {
 	switch (par->info->var.rotate) {
 	case 270:
-		write_reg(par, 0x36, ROWxCOL | HFLIP | VFLIP | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  ROW_X_COL | HFLIP | VFLIP | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, VFLIP | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  VFLIP | (par->bgr << 3));
 		break;
 	case 90:
-		write_reg(par, 0x36, ROWxCOL | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  ROW_X_COL | (par->bgr << 3));
 		break;
 	default:
-		write_reg(par, 0x36, HFLIP | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  HFLIP | (par->bgr << 3));
 		break;
 	}
 
diff --git a/drivers/staging/fbtft/fb_ili9486.c b/drivers/staging/fbtft/fb_ili9486.c
index d9dfff68159b..fa38d8885f0b 100644
--- a/drivers/staging/fbtft/fb_ili9486.c
+++ b/drivers/staging/fbtft/fb_ili9486.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -28,11 +29,10 @@
 static int default_init_sequence[] = {
 	/* Interface Mode Control */
 	-1, 0xb0, 0x0,
-	/* Sleep OUT */
-	-1, 0x11,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
 	-2, 250,
 	/* Interface Pixel Format */
-	-1, 0x3A, 0x55,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
 	/* Power Control 3 */
 	-1, 0xC2, 0x44,
 	/* VCOM Control 1 */
@@ -46,40 +46,41 @@ static int default_init_sequence[] = {
 	/* Digital Gamma Control 1 */
 	-1, 0xE2, 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
 		  0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00,
-	/* Sleep OUT */
-	-1, 0x11,
-	/* Display ON */
-	-1, 0x29,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
 	/* end marker */
 	-3
 };
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 static int set_var(struct fbtft_par *par)
 {
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, 0x80 | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  0x80 | (par->bgr << 3));
 		break;
 	case 90:
-		write_reg(par, 0x36, 0x20 | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  0x20 | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, 0x40 | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  0x40 | (par->bgr << 3));
 		break;
 	case 270:
-		write_reg(par, 0x36, 0xE0 | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  0xE0 | (par->bgr << 3));
 		break;
 	default:
 		break;
diff --git a/drivers/staging/fbtft/fb_ra8875.c b/drivers/staging/fbtft/fb_ra8875.c
index b167c5061631..308a244972aa 100644
--- a/drivers/staging/fbtft/fb_ra8875.c
+++ b/drivers/staging/fbtft/fb_ra8875.c
@@ -257,7 +257,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
 static int write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
 {
 	u16 *vmem16;
-	u16 *txbuf16 = (u16 *)par->txbuf.buf;
+	u16 *txbuf16 = par->txbuf.buf;
 	size_t remain;
 	size_t to_copy;
 	size_t tx_array_size;
@@ -271,13 +271,13 @@ static int write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
 	remain = len / 2;
 	vmem16 = (u16 *)(par->info->screen_buffer + offset);
 	tx_array_size = par->txbuf.len / 2;
-		txbuf16 = (u16 *)(par->txbuf.buf + 1);
+		txbuf16 = par->txbuf.buf + 1;
 		tx_array_size -= 2;
 		*(u8 *)(par->txbuf.buf) = 0x00;
 		startbyte_size = 1;
 
 	while (remain) {
-		to_copy = remain > tx_array_size ? tx_array_size : remain;
+		to_copy = min(tx_array_size, remain);
 		dev_dbg(par->info->device, "    to_copy=%zu, remain=%zu\n",
 			to_copy, remain - to_copy);
 
diff --git a/drivers/staging/fbtft/fb_s6d02a1.c b/drivers/staging/fbtft/fb_s6d02a1.c
index da85057eb3e0..3113355062fc 100644
--- a/drivers/staging/fbtft/fb_s6d02a1.c
+++ b/drivers/staging/fbtft/fb_s6d02a1.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -50,7 +51,7 @@ static int default_init_sequence[] = {
 
 	-1, 0xf3, 0x00, 0x00,
 
-	-1, 0x11,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
 	-2, 50,
 
 	-1, 0xf3, 0x00, 0x01,
@@ -79,18 +80,18 @@ static int default_init_sequence[] = {
 
 	/* initializing sequence */
 
-	-1, 0x36, 0x08,
+	-1, MIPI_DCS_SET_ADDRESS_MODE, 0x08,
 
-	-1, 0x35, 0x00,
+	-1, MIPI_DCS_SET_TEAR_ON, 0x00,
 
-	-1, 0x3a, 0x05,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x05,
 
-	/* gamma setting sequence */
-	-1, 0x26, 0x01,	/* preset gamma curves, possible values 0x01, 0x02, 0x04, 0x08 */
+	/* gamma setting - possible values 0x01, 0x02, 0x04, 0x08 */
+	-1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
 
 	-2, 150,
-	-1, 0x29,
-	-1, 0x2c,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
+	-1, MIPI_DCS_WRITE_MEMORY_START,
 	/* end marker */
 	-3
 
@@ -98,14 +99,13 @@ static int default_init_sequence[] = {
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define MY BIT(7)
@@ -113,7 +113,7 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 #define MV BIT(5)
 static int set_var(struct fbtft_par *par)
 {
-	/* MADCTL - Memory data access control
+	/* Memory data access control (0x36h)
 	     RGB/BGR:
 		1. Mode selection pin SRGB
 			RGB H/W pin for color filter setting: 0=RGB, 1=BGR
@@ -121,16 +121,20 @@ static int set_var(struct fbtft_par *par)
 			RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR */
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, MX | MY | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MY | (par->bgr << 3));
 		break;
 	case 270:
-		write_reg(par, 0x36, MY | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MY | MV | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, par->bgr << 3);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  par->bgr << 3);
 		break;
 	case 90:
-		write_reg(par, 0x36, MX | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MV | (par->bgr << 3));
 		break;
 	}
 
diff --git a/drivers/staging/fbtft/fb_ssd1305.c b/drivers/staging/fbtft/fb_ssd1305.c
new file mode 100644
index 000000000000..4b38c3fadd60
--- /dev/null
+++ b/drivers/staging/fbtft/fb_ssd1305.c
@@ -0,0 +1,216 @@
+/*
+ * FB driver for the SSD1305 OLED Controller
+ *
+ * based on SSD1306 driver by Noralf Tronnes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include "fbtft.h"
+
+#define DRVNAME		"fb_ssd1305"
+
+#define WIDTH 128
+#define HEIGHT 64
+
+/*
+ * write_reg() caveat:
+ *
+ *    This doesn't work because D/C has to be LOW for both values:
+ *      write_reg(par, val1, val2);
+ *
+ *    Do it like this:
+ *      write_reg(par, val1);
+ *      write_reg(par, val2);
+ */
+
+/* Init sequence taken from the Adafruit SSD1306 Arduino library */
+static int init_display(struct fbtft_par *par)
+{
+	par->fbtftops.reset(par);
+
+	if (par->gamma.curves[0] == 0) {
+		mutex_lock(&par->gamma.lock);
+		if (par->info->var.yres == 64)
+			par->gamma.curves[0] = 0xCF;
+		else
+			par->gamma.curves[0] = 0x8F;
+		mutex_unlock(&par->gamma.lock);
+	}
+
+	/* Set Display OFF */
+	write_reg(par, 0xAE);
+
+	/* Set Display Clock Divide Ratio/ Oscillator Frequency */
+	write_reg(par, 0xD5);
+	write_reg(par, 0x80);
+
+	/* Set Multiplex Ratio */
+	write_reg(par, 0xA8);
+	if (par->info->var.yres == 64)
+		write_reg(par, 0x3F);
+	else
+		write_reg(par, 0x1F);
+
+	/* Set Display Offset */
+	write_reg(par, 0xD3);
+	write_reg(par, 0x0);
+
+	/* Set Display Start Line */
+	write_reg(par, 0x40 | 0x0);
+
+	/* Charge Pump Setting */
+	write_reg(par, 0x8D);
+	/* A[2] = 1b, Enable charge pump during display on */
+	write_reg(par, 0x14);
+
+	/* Set Memory Addressing Mode */
+	write_reg(par, 0x20);
+	/* Vertical addressing mode  */
+	write_reg(par, 0x01);
+
+	/*
+	 * Set Segment Re-map
+	 * column address 127 is mapped to SEG0
+	 */
+	write_reg(par, 0xA0 | ((par->info->var.rotate == 180) ? 0x0 : 0x1));
+
+	/*
+	 * Set COM Output Scan Direction
+	 * remapped mode. Scan from COM[N-1] to COM0
+	 */
+	write_reg(par, ((par->info->var.rotate == 180) ? 0xC8 : 0xC0));
+
+	/* Set COM Pins Hardware Configuration */
+	write_reg(par, 0xDA);
+	if (par->info->var.yres == 64) {
+		/* A[4]=1b, Alternative COM pin configuration */
+		write_reg(par, 0x12);
+	} else {
+		/* A[4]=0b, Sequential COM pin configuration */
+		write_reg(par, 0x02);
+	}
+
+	/* Set Pre-charge Period */
+	write_reg(par, 0xD9);
+	write_reg(par, 0xF1);
+
+	/*
+	 * Entire Display ON
+	 * Resume to RAM content display. Output follows RAM content
+	 */
+	write_reg(par, 0xA4);
+
+	/*
+	 * Set Normal Display
+	 *  0 in RAM: OFF in display panel
+	 *  1 in RAM: ON in display panel
+	 */
+	write_reg(par, 0xA6);
+
+	/* Set Display ON */
+	write_reg(par, 0xAF);
+
+	return 0;
+}
+
+static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
+{
+	/* Set Lower Column Start Address for Page Addressing Mode */
+	write_reg(par, 0x00 | ((par->info->var.rotate == 180) ? 0x0 : 0x4));
+	/* Set Higher Column Start Address for Page Addressing Mode */
+	write_reg(par, 0x10 | 0x0);
+	/* Set Display Start Line */
+	write_reg(par, 0x40 | 0x0);
+}
+
+static int blank(struct fbtft_par *par, bool on)
+{
+	if (on)
+		write_reg(par, 0xAE);
+	else
+		write_reg(par, 0xAF);
+	return 0;
+}
+
+/* Gamma is used to control Contrast */
+static int set_gamma(struct fbtft_par *par, unsigned long *curves)
+{
+	curves[0] &= 0xFF;
+	/* Set Contrast Control for BANK0 */
+	write_reg(par, 0x81);
+	write_reg(par, curves[0]);
+
+	return 0;
+}
+
+static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
+{
+	u16 *vmem16 = (u16 *)par->info->screen_buffer;
+	u8 *buf = par->txbuf.buf;
+	int x, y, i;
+	int ret;
+
+	for (x = 0; x < par->info->var.xres; x++) {
+		for (y = 0; y < par->info->var.yres / 8; y++) {
+			*buf = 0x00;
+			for (i = 0; i < 8; i++)
+				*buf |= (vmem16[(y * 8 + i) *
+						par->info->var.xres + x] ?
+					 1 : 0) << i;
+			buf++;
+		}
+	}
+
+	/* Write data */
+	gpio_set_value(par->gpio.dc, 1);
+	ret = par->fbtftops.write(par, par->txbuf.buf,
+				  par->info->var.xres * par->info->var.yres /
+				  8);
+	if (ret < 0)
+		dev_err(par->info->device, "write failed and returned: %d\n",
+			ret);
+	return ret;
+}
+
+static struct fbtft_display display = {
+	.regwidth = 8,
+	.width = WIDTH,
+	.height = HEIGHT,
+	.txbuflen = WIDTH * HEIGHT / 8,
+	.gamma_num = 1,
+	.gamma_len = 1,
+	.gamma = "00",
+	.fbtftops = {
+		.write_vmem = write_vmem,
+		.init_display = init_display,
+		.set_addr_win = set_addr_win,
+		.blank = blank,
+		.set_gamma = set_gamma,
+	},
+};
+
+FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1305", &display);
+
+MODULE_ALIAS("spi:" DRVNAME);
+MODULE_ALIAS("platform:" DRVNAME);
+MODULE_ALIAS("spi:ssd1305");
+MODULE_ALIAS("platform:ssd1305");
+
+MODULE_DESCRIPTION("SSD1305 OLED Driver");
+MODULE_AUTHOR("Alexey Mednyy");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/fbtft/fb_ssd1325.c b/drivers/staging/fbtft/fb_ssd1325.c
new file mode 100644
index 000000000000..15078bf2aa4b
--- /dev/null
+++ b/drivers/staging/fbtft/fb_ssd1325.c
@@ -0,0 +1,205 @@
+/*
+ * FB driver for the SSD1325 OLED Controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include "fbtft.h"
+
+#define DRVNAME		"fb_ssd1325"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define GAMMA_NUM   1
+#define GAMMA_LEN   15
+#define DEFAULT_GAMMA "7 1 1 1 1 2 2 3 3 4 4 5 5 6 6"
+
+/*
+ * write_reg() caveat:
+ *
+ *    This doesn't work because D/C has to be LOW for both values:
+ *      write_reg(par, val1, val2);
+ *
+ *    Do it like this:
+ *      write_reg(par, val1);
+ *      write_reg(par, val2);
+ */
+
+/* Init sequence taken from the Adafruit SSD1306 Arduino library */
+static int init_display(struct fbtft_par *par)
+{
+	par->fbtftops.reset(par);
+
+	gpio_set_value(par->gpio.cs, 0);
+
+	write_reg(par, 0xb3);
+	write_reg(par, 0xf0);
+	write_reg(par, 0xae);
+	write_reg(par, 0xa1);
+	write_reg(par, 0x00);
+	write_reg(par, 0xa8);
+	write_reg(par, 0x3f);
+	write_reg(par, 0xa0);
+	write_reg(par, 0x45);
+	write_reg(par, 0xa2);
+	write_reg(par, 0x40);
+	write_reg(par, 0x75);
+	write_reg(par, 0x00);
+	write_reg(par, 0x3f);
+	write_reg(par, 0x15);
+	write_reg(par, 0x00);
+	write_reg(par, 0x7f);
+	write_reg(par, 0xa4);
+	write_reg(par, 0xaf);
+
+	return 0;
+}
+
+static uint8_t rgb565_to_g16(u16 pixel)
+{
+	u16 b = pixel & 0x1f;
+	u16 g = (pixel & (0x3f << 5)) >> 5;
+	u16 r = (pixel & (0x1f << (5 + 6))) >> (5 + 6);
+
+	pixel = (299 * r + 587 * g + 114 * b) / 195;
+	if (pixel > 255)
+		pixel = 255;
+	return (uint8_t)pixel / 16;
+}
+
+static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
+{
+	fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par,
+		      "%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe,
+		      ye);
+
+	write_reg(par, 0x75);
+	write_reg(par, 0x00);
+	write_reg(par, 0x3f);
+	write_reg(par, 0x15);
+	write_reg(par, 0x00);
+	write_reg(par, 0x7f);
+}
+
+static int blank(struct fbtft_par *par, bool on)
+{
+	fbtft_par_dbg(DEBUG_BLANK, par, "%s(blank=%s)\n",
+		      __func__, on ? "true" : "false");
+
+	if (on)
+		write_reg(par, 0xAE);
+	else
+		write_reg(par, 0xAF);
+	return 0;
+}
+
+/*
+ * Grayscale Lookup Table
+ * GS1 - GS15
+ * The "Gamma curve" contains the relative values between the entries
+ * in the Lookup table.
+ *
+ * 0 = Setting of GS1 < Setting of GS2 < Setting of GS3.....<
+ * Setting of GS14 < Setting of GS15
+ */
+static int set_gamma(struct fbtft_par *par, unsigned long *curves)
+{
+	int i;
+
+	fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
+
+	for (i = 0; i < GAMMA_LEN; i++) {
+		if (i > 0 && curves[i] < 1) {
+			dev_err(par->info->device,
+				"Illegal value in Grayscale Lookup Table at index %d.\n"
+				"Must be greater than 0\n", i);
+			return -EINVAL;
+		}
+		if (curves[i] > 7) {
+			dev_err(par->info->device,
+				"Illegal value(s) in Grayscale Lookup Table.\n"
+				"At index=%d, the accumulated value has exceeded 7\n",
+				i);
+			return -EINVAL;
+		}
+	}
+	write_reg(par, 0xB8);
+	for (i = 0; i < 8; i++)
+		write_reg(par, (curves[i] & 0xFF));
+	return 0;
+}
+
+static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
+{
+	u16 *vmem16 = (u16 *)par->info->screen_buffer;
+	u8 *buf = par->txbuf.buf;
+	u8 n1;
+	u8 n2;
+	int y, x;
+	int ret;
+
+	for (x = 0; x < par->info->var.xres; x++) {
+		if (x % 2)
+			continue;
+		for (y = 0; y < par->info->var.yres; y++) {
+			n1 = rgb565_to_g16(vmem16[y * par->info->var.xres + x]);
+			n2 = rgb565_to_g16(vmem16
+					   [y * par->info->var.xres + x + 1]);
+			*buf = (n1 << 4) | n2;
+			buf++;
+		}
+	}
+
+	gpio_set_value(par->gpio.dc, 1);
+
+	/* Write data */
+	ret = par->fbtftops.write(par, par->txbuf.buf,
+				par->info->var.xres * par->info->var.yres / 2);
+	if (ret < 0)
+		dev_err(par->info->device,
+			"%s: write failed and returned: %d\n", __func__, ret);
+
+	return ret;
+}
+
+static struct fbtft_display display = {
+	.regwidth = 8,
+	.width = WIDTH,
+	.height = HEIGHT,
+	.txbuflen = WIDTH * HEIGHT / 2,
+	.gamma_num = GAMMA_NUM,
+	.gamma_len = GAMMA_LEN,
+	.gamma = DEFAULT_GAMMA,
+	.fbtftops = {
+		.write_vmem = write_vmem,
+		.init_display = init_display,
+		.set_addr_win = set_addr_win,
+		.blank = blank,
+		.set_gamma = set_gamma,
+	},
+};
+
+FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1325", &display);
+
+MODULE_ALIAS("spi:" DRVNAME);
+MODULE_ALIAS("platform:" DRVNAME);
+MODULE_ALIAS("spi:ssd1325");
+MODULE_ALIAS("platform:ssd1325");
+
+MODULE_DESCRIPTION("SSD1325 OLED Driver");
+MODULE_AUTHOR("Alexey Mednyy");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/fbtft/fb_st7735r.c b/drivers/staging/fbtft/fb_st7735r.c
index a92b0d071097..c5e51fe1aad5 100644
--- a/drivers/staging/fbtft/fb_st7735r.c
+++ b/drivers/staging/fbtft/fb_st7735r.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -25,12 +26,10 @@
 			"0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10"
 
 static int default_init_sequence[] = {
-	/* SWRESET - Software reset */
-	-1, 0x01,
+	-1, MIPI_DCS_SOFT_RESET,
 	-2, 150,                               /* delay */
 
-	/* SLPOUT - Sleep out & booster on */
-	-1, 0x11,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
 	-2, 500,                               /* delay */
 
 	/* FRMCTR1 - frame rate control: normal mode
@@ -71,18 +70,14 @@ static int default_init_sequence[] = {
 	/* VMCTR1 - Power Control */
 	-1, 0xC5, 0x0E,
 
-	/* INVOFF - Display inversion off */
-	-1, 0x20,
+	-1, MIPI_DCS_EXIT_INVERT_MODE,
 
-	/* COLMOD - Interface pixel format */
-	-1, 0x3A, 0x05,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
 
-	/* DISPON - Display On */
-	-1, 0x29,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
 	-2, 100,                               /* delay */
 
-	/* NORON - Partial off (Normal) */
-	-1, 0x13,
+	-1, MIPI_DCS_ENTER_NORMAL_MODE,
 	-2, 10,                               /* delay */
 
 	/* end marker */
@@ -91,14 +86,13 @@ static int default_init_sequence[] = {
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define MY BIT(7)
@@ -114,16 +108,20 @@ static int set_var(struct fbtft_par *par)
 		RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR */
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, MX | MY | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MY | (par->bgr << 3));
 		break;
 	case 270:
-		write_reg(par, 0x36, MY | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MY | MV | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, par->bgr << 3);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  par->bgr << 3);
 		break;
 	case 90:
-		write_reg(par, 0x36, MX | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MV | (par->bgr << 3));
 		break;
 	}
 
diff --git a/drivers/staging/fbtft/fb_tinylcd.c b/drivers/staging/fbtft/fb_tinylcd.c
index caf263db436a..097e71cfef62 100644
--- a/drivers/staging/fbtft/fb_tinylcd.c
+++ b/drivers/staging/fbtft/fb_tinylcd.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -38,7 +39,7 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, 0xB4, 0x02);
 	write_reg(par, 0xB6, 0x00, 0x22, 0x3B);
 	write_reg(par, 0xB7, 0x07);
-	write_reg(par, 0x36, 0x58);
+	write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x58);
 	write_reg(par, 0xF0, 0x36, 0xA5, 0xD3);
 	write_reg(par, 0xE5, 0x80);
 	write_reg(par, 0xE5, 0x01);
@@ -47,24 +48,23 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, 0xF0, 0x36, 0xA5, 0x53);
 	write_reg(par, 0xE0, 0x00, 0x35, 0x33, 0x00, 0x00, 0x00,
 			     0x00, 0x35, 0x33, 0x00, 0x00, 0x00);
-	write_reg(par, 0x3A, 0x55);
-	write_reg(par, 0x11);
+	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
+	write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
 	udelay(250);
-	write_reg(par, 0x29);
+	write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
 
 	return 0;
 }
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 static int set_var(struct fbtft_par *par)
@@ -72,19 +72,19 @@ static int set_var(struct fbtft_par *par)
 	switch (par->info->var.rotate) {
 	case 270:
 		write_reg(par, 0xB6, 0x00, 0x02, 0x3B);
-		write_reg(par, 0x36, 0x28);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x28);
 		break;
 	case 180:
 		write_reg(par, 0xB6, 0x00, 0x22, 0x3B);
-		write_reg(par, 0x36, 0x58);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x58);
 		break;
 	case 90:
 		write_reg(par, 0xB6, 0x00, 0x22, 0x3B);
-		write_reg(par, 0x36, 0x38);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x38);
 		break;
 	default:
 		write_reg(par, 0xB6, 0x00, 0x22, 0x3B);
-		write_reg(par, 0x36, 0x08);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x08);
 		break;
 	}
 
diff --git a/drivers/staging/fbtft/fb_uc1611.c b/drivers/staging/fbtft/fb_uc1611.c
index 4e828142058e..e87401aacfb3 100644
--- a/drivers/staging/fbtft/fb_uc1611.c
+++ b/drivers/staging/fbtft/fb_uc1611.c
@@ -222,8 +222,8 @@ static int set_var(struct fbtft_par *par)
 static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 {
 	u8 *vmem8 = (u8 *)(par->info->screen_buffer);
-	u8 *buf8 = (u8 *)(par->txbuf.buf);
-	u16 *buf16 = (u16 *)(par->txbuf.buf);
+	u8 *buf8 = par->txbuf.buf;
+	u16 *buf16 = par->txbuf.buf;
 	int line_length = par->info->fix.line_length;
 	int y_start = (offset / line_length);
 	int y_end = (offset + len - 1) / line_length;
diff --git a/drivers/staging/fbtft/fb_uc1701.c b/drivers/staging/fbtft/fb_uc1701.c
index 212908e39277..b78045fe5393 100644
--- a/drivers/staging/fbtft/fb_uc1701.c
+++ b/drivers/staging/fbtft/fb_uc1701.c
@@ -78,11 +78,11 @@ static int init_display(struct fbtft_par *par)
 	mdelay(10);
 
 	/* set startpoint */
-	/* LCD_START_LINE | (pos & 0x3F) */
 	write_reg(par, LCD_START_LINE);
 
 	/* select orientation BOTTOMVIEW */
 	write_reg(par, LCD_BOTTOMVIEW | 1);
+
 	/* output mode select (turns display upside-down) */
 	write_reg(par, LCD_SCAN_DIR | 0x00);
 
@@ -96,20 +96,14 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, LCD_BIAS | 0);
 
 	/* power control mode: all features on */
-	/* LCD_POWER_CONTROL | (val&0x07) */
 	write_reg(par, LCD_POWER_CONTROL | 0x07);
 
 	/* set voltage regulator R/R */
-	/* LCD_VOLTAGE | (val&0x07) */
 	write_reg(par, LCD_VOLTAGE | 0x07);
 
 	/* volume mode set */
-	/* LCD_VOLUME_MODE,val&0x3f,LCD_NO_OP */
 	write_reg(par, LCD_VOLUME_MODE);
-	/* LCD_VOLUME_MODE,val&0x3f,LCD_NO_OP */
 	write_reg(par, 0x09);
-	/* ???? */
-	/* LCD_VOLUME_MODE,val&0x3f,LCD_NO_OP */
 	write_reg(par, LCD_NO_OP);
 
 	/* advanced program control */
@@ -125,17 +119,8 @@ static int init_display(struct fbtft_par *par)
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
 	/* goto address */
-	/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-	 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-	 LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 	write_reg(par, LCD_PAGE_ADDRESS);
-	/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-	 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-	  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 	write_reg(par, 0x00);
-	/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-	 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-	  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 	write_reg(par, LCD_COL_ADDRESS);
 }
 
@@ -156,17 +141,9 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 					 1 : 0) << i;
 			buf++;
 		}
-		/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-		 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-		  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
+
 		write_reg(par, LCD_PAGE_ADDRESS | (u8)y);
-		/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-		 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-		  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 		write_reg(par, 0x00);
-		/* LCD_PAGE_ADDRESS | ((page) & 0x1F),
-		 (((col)+SHIFT_ADDR_NORMAL) & 0x0F),
-		  LCD_COL_ADDRESS | ((((col)+SHIFT_ADDR_NORMAL)>>4) & 0x0F) */
 		write_reg(par, LCD_COL_ADDRESS);
 		gpio_set_value(par->gpio.dc, 1);
 		ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH);
diff --git a/drivers/staging/fbtft/fbtft-bus.c b/drivers/staging/fbtft/fbtft-bus.c
index 58449ad84f46..83505bce628a 100644
--- a/drivers/staging/fbtft/fbtft-bus.c
+++ b/drivers/staging/fbtft/fbtft-bus.c
@@ -125,7 +125,7 @@ EXPORT_SYMBOL(fbtft_write_reg8_bus9);
 int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
 {
 	u16 *vmem16;
-	u16 *txbuf16 = (u16 *)par->txbuf.buf;
+	u16 *txbuf16 = par->txbuf.buf;
 	size_t remain;
 	size_t to_copy;
 	size_t tx_array_size;
@@ -150,14 +150,14 @@ int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
 	tx_array_size = par->txbuf.len / 2;
 
 	if (par->startbyte) {
-		txbuf16 = (u16 *)(par->txbuf.buf + 1);
+		txbuf16 = par->txbuf.buf + 1;
 		tx_array_size -= 2;
 		*(u8 *)(par->txbuf.buf) = par->startbyte | 0x2;
 		startbyte_size = 1;
 	}
 
 	while (remain) {
-		to_copy = remain > tx_array_size ? tx_array_size : remain;
+		to_copy = min(tx_array_size, remain);
 		dev_dbg(par->info->device, "    to_copy=%zu, remain=%zu\n",
 						to_copy, remain - to_copy);
 
@@ -201,7 +201,7 @@ int fbtft_write_vmem16_bus9(struct fbtft_par *par, size_t offset, size_t len)
 	tx_array_size = par->txbuf.len / 2;
 
 	while (remain) {
-		to_copy = remain > tx_array_size ? tx_array_size : remain;
+		to_copy = min(tx_array_size, remain);
 		dev_dbg(par->info->device, "    to_copy=%zu, remain=%zu\n",
 						to_copy, remain - to_copy);
 
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index b1e45161eefc..0c1a77cafe14 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -35,6 +35,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 #include "internal.h"
@@ -129,7 +130,8 @@ static int fbtft_request_gpios(struct fbtft_par *par)
 	while (gpio->name[0]) {
 		flags = FBTFT_GPIO_NO_MATCH;
 		/* if driver provides match function, try it first,
-		   if no match use our own */
+		 * if no match use our own
+		 */
 		if (par->fbtftops.request_gpios_match)
 			flags = par->fbtftops.request_gpios_match(par, gpio);
 		if (flags == FBTFT_GPIO_NO_MATCH)
@@ -319,16 +321,13 @@ EXPORT_SYMBOL(fbtft_unregister_backlight);
 static void fbtft_set_addr_win(struct fbtft_par *par, int xs, int ys, int xe,
 			       int ye)
 {
-	/* Column address set */
-	write_reg(par, 0x2A,
-		(xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
 
-	/* Row address set */
-	write_reg(par, 0x2B,
-		(ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 static void fbtft_reset(struct fbtft_par *par)
@@ -520,8 +519,7 @@ static ssize_t fbtft_fb_write(struct fb_info *info, const char __user *buf,
 		"%s: count=%zd, ppos=%llu\n", __func__,  count, *ppos);
 	res = fb_sys_write(info, buf, count, ppos);
 
-	/* TODO: only mark changed area
-	   update all for now */
+	/* TODO: only mark changed area update all for now */
 	par->fbtftops.mkdirty(info, -1, 0);
 
 	return res;
@@ -738,8 +736,11 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
 		goto alloc_fail;
 
 	if (display->gamma_num && display->gamma_len) {
-		gamma_curves = devm_kzalloc(dev, display->gamma_num * display->gamma_len * sizeof(gamma_curves[0]),
-						GFP_KERNEL);
+		gamma_curves = devm_kcalloc(dev,
+					    display->gamma_num *
+					    display->gamma_len,
+					    sizeof(gamma_curves[0]),
+					    GFP_KERNEL);
 		if (!gamma_curves)
 			goto alloc_fail;
 	}
@@ -987,10 +988,6 @@ int fbtft_register_framebuffer(struct fb_info *fb_info)
 reg_fail:
 	if (par->fbtftops.unregister_backlight)
 		par->fbtftops.unregister_backlight(par);
-	if (spi)
-		spi_set_drvdata(spi, NULL);
-	if (par->pdev)
-		platform_set_drvdata(par->pdev, NULL);
 
 	return ret;
 }
@@ -1008,12 +1005,7 @@ EXPORT_SYMBOL(fbtft_register_framebuffer);
 int fbtft_unregister_framebuffer(struct fb_info *fb_info)
 {
 	struct fbtft_par *par = fb_info->par;
-	struct spi_device *spi = par->spi;
 
-	if (spi)
-		spi_set_drvdata(spi, NULL);
-	if (par->pdev)
-		platform_set_drvdata(par->pdev, NULL);
 	if (par->fbtftops.unregister_backlight)
 		par->fbtftops.unregister_backlight(par);
 	fbtft_sysfs_exit(par);
diff --git a/drivers/staging/fbtft/fbtft.h b/drivers/staging/fbtft/fbtft.h
index 3ccdec94fee7..d3bc3943a983 100644
--- a/drivers/staging/fbtft/fbtft.h
+++ b/drivers/staging/fbtft/fbtft.h
@@ -20,14 +20,6 @@
 #include <linux/spi/spi.h>
 #include <linux/platform_device.h>
 
-#define FBTFT_NOP		0x00
-#define FBTFT_SWRESET	0x01
-#define FBTFT_RDDID		0x04
-#define FBTFT_RDDST		0x09
-#define FBTFT_CASET		0x2A
-#define FBTFT_RASET		0x2B
-#define FBTFT_RAMWR		0x2C
-
 #define FBTFT_ONBOARD_BACKLIGHT 2
 
 #define FBTFT_GPIO_NO_MATCH		0xFFFF
diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c
index 071f79bd19f3..241d7c6bebde 100644
--- a/drivers/staging/fbtft/fbtft_device.c
+++ b/drivers/staging/fbtft/fbtft_device.c
@@ -212,38 +212,63 @@ static int hy28b_init_sequence[] = {
 	"0F 00 1 7 4 0 0 0 6 7"
 
 static int pitft_init_sequence[] = {
-	-1, 0x01, -2, 5, -1, 0x28, -1, 0xEF,
-	0x03, 0x80, 0x02, -1, 0xCF, 0x00, 0xC1, 0x30,
+	-1, MIPI_DCS_SOFT_RESET,
+	-2, 5,
+	-1, MIPI_DCS_SET_DISPLAY_OFF,
+	-1, 0xEF, 0x03, 0x80, 0x02,
+	-1, 0xCF, 0x00, 0xC1, 0x30,
 	-1, 0xED, 0x64, 0x03, 0x12, 0x81,
 	-1, 0xE8, 0x85, 0x00, 0x78,
 	-1, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02,
-	-1, 0xF7, 0x20, -1, 0xEA, 0x00, 0x00,
-	-1, 0xC0, 0x23, -1, 0xC1, 0x10, -1, 0xC5,
-	0x3e, 0x28, -1, 0xC7, 0x86, -1, 0x3A, 0x55,
-	-1, 0xB1, 0x00, 0x18, -1, 0xB6, 0x08, 0x82,
-	0x27, -1, 0xF2, 0x00, -1, 0x26, 0x01,
-	-1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08,
-	0x4E, 0xF1, 0x37, 0x07, 0x10, 0x03,
-	0x0E, 0x09, 0x00, -1, 0xE1, 0x00, 0x0E, 0x14,
-	0x03, 0x11, 0x07, 0x31, 0xC1, 0x48,
-	0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F, -1,
-	0x11, -2, 100, -1, 0x29, -2, 20, -3 };
+	-1, 0xF7, 0x20,
+	-1, 0xEA, 0x00, 0x00,
+	-1, 0xC0, 0x23,
+	-1, 0xC1, 0x10,
+	-1, 0xC5, 0x3E, 0x28,
+	-1, 0xC7, 0x86,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
+	-1, 0xB1, 0x00, 0x18,
+	-1, 0xB6, 0x08, 0x82, 0x27,
+	-1, 0xF2, 0x00,
+	-1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
+	-1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E,
+		0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
+	-1, 0xE1, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31,
+		0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
+	-2, 100,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
+	-2, 20,
+	-3
+};
 
 static int waveshare32b_init_sequence[] = {
 	-1, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02,
 	-1, 0xCF, 0x00, 0xC1, 0x30,
-	-1, 0xE8, 0x85, 0x00, 0x78, -1, 0xEA, 0x00,
-	0x00, -1, 0xED, 0x64, 0x03, 0x12, 0x81,
-	-1, 0xF7, 0x20, -1, 0xC0, 0x23, -1, 0xC1,
-	0x10, -1, 0xC5, 0x3e, 0x28, -1, 0xC7, 0x86,
-	-1, 0x36, 0x28, -1, 0x3A, 0x55, -1, 0xB1, 0x00,
-	0x18, -1, 0xB6, 0x08, 0x82, 0x27,
-	-1, 0xF2, 0x00, -1, 0x26, 0x01,
+	-1, 0xE8, 0x85, 0x00, 0x78,
+	-1, 0xEA, 0x00, 0x00,
+	-1, 0xED, 0x64, 0x03, 0x12, 0x81,
+	-1, 0xF7, 0x20,
+	-1, 0xC0, 0x23,
+	-1, 0xC1, 0x10,
+	-1, 0xC5, 0x3E, 0x28,
+	-1, 0xC7, 0x86,
+	-1, MIPI_DCS_SET_ADDRESS_MODE, 0x28,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
+	-1, 0xB1, 0x00, 0x18,
+	-1, 0xB6, 0x08, 0x82, 0x27,
+	-1, 0xF2, 0x00,
+	-1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
 	-1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E,
-	0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
+		0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
 	-1, 0xE1, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31,
-	0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
-	-1, 0x11, -2, 120, -1, 0x29, -1, 0x2c, -3 };
+		0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
+	-2, 120,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
+	-1, MIPI_DCS_WRITE_MEMORY_START,
+	-3
+};
 
 /* Supported displays in alphabetical order */
 static struct fbtft_device_display displays[] = {
@@ -1287,7 +1312,7 @@ Device 'xxx' does not have a release() function, it is broken and must be fixed
 
 static int spi_device_found(struct device *dev, void *data)
 {
-	struct spi_device *spi = container_of(dev, struct spi_device, dev);
+	struct spi_device *spi = to_spi_device(dev);
 
 	dev_info(dev, "%s %s %dkHz %d bits mode=0x%02X\n", spi->modalias,
 		 dev_name(dev), spi->max_speed_hz / 1000, spi->bits_per_word,
@@ -1305,7 +1330,7 @@ static void pr_spi_devices(void)
 static int p_device_found(struct device *dev, void *data)
 {
 	struct platform_device
-	*pdev = container_of(dev, struct platform_device, dev);
+	*pdev = to_platform_device(dev);
 
 	if (strstr(pdev->name, "fb"))
 		dev_info(dev, "%s id=%d pdata? %s\n", pdev->name, pdev->id,