Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 "This time we have Andy updates on dw_dmac which is attempting to make
  this IP block available as PCI and platform device though not fully
  complete this time.

  We also have TI EDMA moving the dma driver to use dmaengine APIs, also
  have a new driver for mmp-tdma, along with bunch of small updates.

  Now for your excitement the merge is little unusual here, while
  merging the auto merge on linux-next picks wrong choice for pl330
  (drivers/dma/pl330.c) and this causes build failure.  The correct
  resolution is in linux-next.  (DMA: PL330: Fix build error) I didn't
  back merge your tree this time as you are better than me so no point
  in doing that for me :)"

Fixed the pl330 conflict as in linux-next, along with trivial header
file conflicts due to changed includes.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
  dma: tegra: fix interrupt name issue with apb dma.
  dw_dmac: fix a regression in dwc_prep_dma_memcpy
  dw_dmac: introduce software emulation of LLP transfers
  dw_dmac: autoconfigure data_width or get it via platform data
  dw_dmac: autoconfigure block_size or use platform data
  dw_dmac: get number of channels from hardware if possible
  dw_dmac: fill optional encoded parameters in register structure
  dw_dmac: mark dwc_dump_chan_regs as inline
  DMA: PL330: return ENOMEM instead of 0 from pl330_alloc_chan_resources
  DMA: PL330: Remove redundant runtime_suspend/resume functions
  DMA: PL330: Remove controller clock enable/disable
  dmaengine: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  DMA: PL330: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
  ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
  dma: tegra: use list_move_tail instead of list_del/list_add_tail
  mxs/dma: Enlarge the CCW descriptor area to 4 pages
  dw_dmac: utilize slave_id to pass request line
  dmaengine: mmp_tdma: add dt support
  dmaengine: mmp-pdma support
  spi: davici - make davinci select edma
  ...

2 files changed, 131 insertions, 162 deletions

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 8c2ff2490d99..1acae359cabe 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -134,6 +134,7 @@ config SPI_DAVINCI
 	tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
 	depends on ARCH_DAVINCI
 	select SPI_BITBANG
+	select TI_EDMA
 	help
 	  SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
 
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 3afe2f4f5b8e..147dfa87a64b 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -25,13 +25,14 @@
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
+#include <linux/edma.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/slab.h>
 
 #include <linux/platform_data/spi-davinci.h>
-#include <mach/edma.h>
 
 #define SPI_NO_RESOURCE		((resource_size_t)-1)
 
@@ -113,14 +114,6 @@
 #define SPIDEF		0x4c
 #define SPIFMT0		0x50
 
-/* We have 2 DMA channels per CS, one for RX and one for TX */
-struct davinci_spi_dma {
-	int			tx_channel;
-	int			rx_channel;
-	int			dummy_param_slot;
-	enum dma_event_q	eventq;
-};
-
 /* SPI Controller driver's private data. */
 struct davinci_spi {
 	struct spi_bitbang	bitbang;
@@ -134,11 +127,14 @@ struct davinci_spi {
 
 	const void		*tx;
 	void			*rx;
-#define SPI_TMP_BUFSZ	(SMP_CACHE_BYTES + 1)
-	u8			rx_tmp_buf[SPI_TMP_BUFSZ];
 	int			rcount;
 	int			wcount;
-	struct davinci_spi_dma	dma;
+
+	struct dma_chan		*dma_rx;
+	struct dma_chan		*dma_tx;
+	int			dma_rx_chnum;
+	int			dma_tx_chnum;
+
 	struct davinci_spi_platform_data *pdata;
 
 	void			(*get_rx)(u32 rx_data, struct davinci_spi *);
@@ -496,21 +492,23 @@ out:
 	return errors;
 }
 
-static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data)
+static void davinci_spi_dma_rx_callback(void *data)
 {
-	struct davinci_spi *dspi = data;
-	struct davinci_spi_dma *dma = &dspi->dma;
+	struct davinci_spi *dspi = (struct davinci_spi *)data;
 
-	edma_stop(lch);
+	dspi->rcount = 0;
 
-	if (status == DMA_COMPLETE) {
-		if (lch == dma->rx_channel)
-			dspi->rcount = 0;
-		if (lch == dma->tx_channel)
-			dspi->wcount = 0;
-	}
+	if (!dspi->wcount && !dspi->rcount)
+		complete(&dspi->done);
+}
 
-	if ((!dspi->wcount && !dspi->rcount) || (status != DMA_COMPLETE))
+static void davinci_spi_dma_tx_callback(void *data)
+{
+	struct davinci_spi *dspi = (struct davinci_spi *)data;
+
+	dspi->wcount = 0;
+
+	if (!dspi->wcount && !dspi->rcount)
 		complete(&dspi->done);
 }
 
@@ -526,20 +524,20 @@ static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data)
 static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 {
 	struct davinci_spi *dspi;
-	int data_type, ret;
+	int data_type, ret = -ENOMEM;
 	u32 tx_data, spidat1;
 	u32 errors = 0;
 	struct davinci_spi_config *spicfg;
 	struct davinci_spi_platform_data *pdata;
 	unsigned uninitialized_var(rx_buf_count);
-	struct device *sdev;
+	void *dummy_buf = NULL;
+	struct scatterlist sg_rx, sg_tx;
 
 	dspi = spi_master_get_devdata(spi->master);
 	pdata = dspi->pdata;
 	spicfg = (struct davinci_spi_config *)spi->controller_data;
 	if (!spicfg)
 		spicfg = &davinci_spi_default_cfg;
-	sdev = dspi->bitbang.master->dev.parent;
 
 	/* convert len to words based on bits_per_word */
 	data_type = dspi->bytes_per_word[spi->chip_select];
@@ -567,112 +565,83 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 		spidat1 |= tx_data & 0xFFFF;
 		iowrite32(spidat1, dspi->base + SPIDAT1);
 	} else {
-		struct davinci_spi_dma *dma;
-		unsigned long tx_reg, rx_reg;
-		struct edmacc_param param;
-		void *rx_buf;
-		int b, c;
-
-		dma = &dspi->dma;
-
-		tx_reg = (unsigned long)dspi->pbase + SPIDAT1;
-		rx_reg = (unsigned long)dspi->pbase + SPIBUF;
-
-		/*
-		 * Transmit DMA setup
-		 *
-		 * If there is transmit data, map the transmit buffer, set it
-		 * as the source of data and set the source B index to data
-		 * size. If there is no transmit data, set the transmit register
-		 * as the source of data, and set the source B index to zero.
-		 *
-		 * The destination is always the transmit register itself. And
-		 * the destination never increments.
-		 */
-
-		if (t->tx_buf) {
-			t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf,
-						t->len, DMA_TO_DEVICE);
-			if (dma_mapping_error(&spi->dev, t->tx_dma)) {
-				dev_dbg(sdev, "Unable to DMA map %d bytes"
-						"TX buffer\n", t->len);
-				return -ENOMEM;
-			}
-		}
-
-		/*
-		 * If number of words is greater than 65535, then we need
-		 * to configure a 3 dimension transfer.  Use the BCNTRLD
-		 * feature to allow for transfers that aren't even multiples
-		 * of 65535 (or any other possible b size) by first transferring
-		 * the remainder amount then grabbing the next N blocks of
-		 * 65535 words.
-		 */
-
-		c = dspi->wcount / (SZ_64K - 1);	/* N 65535 Blocks */
-		b = dspi->wcount - c * (SZ_64K - 1);	/* Remainder */
-		if (b)
-			c++;
+		struct dma_slave_config dma_rx_conf = {
+			.direction = DMA_DEV_TO_MEM,
+			.src_addr = (unsigned long)dspi->pbase + SPIBUF,
+			.src_addr_width = data_type,
+			.src_maxburst = 1,
+		};
+		struct dma_slave_config dma_tx_conf = {
+			.direction = DMA_MEM_TO_DEV,
+			.dst_addr = (unsigned long)dspi->pbase + SPIDAT1,
+			.dst_addr_width = data_type,
+			.dst_maxburst = 1,
+		};
+		struct dma_async_tx_descriptor *rxdesc;
+		struct dma_async_tx_descriptor *txdesc;
+		void *buf;
+
+		dummy_buf = kzalloc(t->len, GFP_KERNEL);
+		if (!dummy_buf)
+			goto err_alloc_dummy_buf;
+
+		dmaengine_slave_config(dspi->dma_rx, &dma_rx_conf);
+		dmaengine_slave_config(dspi->dma_tx, &dma_tx_conf);
+
+		sg_init_table(&sg_rx, 1);
+		if (!t->rx_buf)
+			buf = dummy_buf;
 		else
-			b = SZ_64K - 1;
-
-		param.opt = TCINTEN | EDMA_TCC(dma->tx_channel);
-		param.src = t->tx_buf ? t->tx_dma : tx_reg;
-		param.a_b_cnt = b << 16 | data_type;
-		param.dst = tx_reg;
-		param.src_dst_bidx = t->tx_buf ? data_type : 0;
-		param.link_bcntrld = 0xffffffff;
-		param.src_dst_cidx = t->tx_buf ? data_type : 0;
-		param.ccnt = c;
-		edma_write_slot(dma->tx_channel, &param);
-		edma_link(dma->tx_channel, dma->dummy_param_slot);
-
-		/*
-		 * Receive DMA setup
-		 *
-		 * If there is receive buffer, use it to receive data. If there
-		 * is none provided, use a temporary receive buffer. Set the
-		 * destination B index to 0 so effectively only one byte is used
-		 * in the temporary buffer (address does not increment).
-		 *
-		 * The source of receive data is the receive data register. The
-		 * source address never increments.
-		 */
-
-		if (t->rx_buf) {
-			rx_buf = t->rx_buf;
-			rx_buf_count = t->len;
-		} else {
-			rx_buf = dspi->rx_tmp_buf;
-			rx_buf_count = sizeof(dspi->rx_tmp_buf);
+			buf = t->rx_buf;
+		t->rx_dma = dma_map_single(&spi->dev, buf,
+				t->len, DMA_FROM_DEVICE);
+		if (!t->rx_dma) {
+			ret = -EFAULT;
+			goto err_rx_map;
 		}
+		sg_dma_address(&sg_rx) = t->rx_dma;
+		sg_dma_len(&sg_rx) = t->len;
 
-		t->rx_dma = dma_map_single(&spi->dev, rx_buf, rx_buf_count,
-							DMA_FROM_DEVICE);
-		if (dma_mapping_error(&spi->dev, t->rx_dma)) {
-			dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
-								rx_buf_count);
-			if (t->tx_buf)
-				dma_unmap_single(&spi->dev, t->tx_dma, t->len,
-								DMA_TO_DEVICE);
-			return -ENOMEM;
+		sg_init_table(&sg_tx, 1);
+		if (!t->tx_buf)
+			buf = dummy_buf;
+		else
+			buf = (void *)t->tx_buf;
+		t->tx_dma = dma_map_single(&spi->dev, buf,
+				t->len, DMA_FROM_DEVICE);
+		if (!t->tx_dma) {
+			ret = -EFAULT;
+			goto err_tx_map;
 		}
-
-		param.opt = TCINTEN | EDMA_TCC(dma->rx_channel);
-		param.src = rx_reg;
-		param.a_b_cnt = b << 16 | data_type;
-		param.dst = t->rx_dma;
-		param.src_dst_bidx = (t->rx_buf ? data_type : 0) << 16;
-		param.link_bcntrld = 0xffffffff;
-		param.src_dst_cidx = (t->rx_buf ? data_type : 0) << 16;
-		param.ccnt = c;
-		edma_write_slot(dma->rx_channel, &param);
+		sg_dma_address(&sg_tx) = t->tx_dma;
+		sg_dma_len(&sg_tx) = t->len;
+
+		rxdesc = dmaengine_prep_slave_sg(dspi->dma_rx,
+				&sg_rx, 1, DMA_DEV_TO_MEM,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+		if (!rxdesc)
+			goto err_desc;
+
+		txdesc = dmaengine_prep_slave_sg(dspi->dma_tx,
+				&sg_tx, 1, DMA_MEM_TO_DEV,
+				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+		if (!txdesc)
+			goto err_desc;
+
+		rxdesc->callback = davinci_spi_dma_rx_callback;
+		rxdesc->callback_param = (void *)dspi;
+		txdesc->callback = davinci_spi_dma_tx_callback;
+		txdesc->callback_param = (void *)dspi;
 
 		if (pdata->cshold_bug)
 			iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2);
 
-		edma_start(dma->rx_channel);
-		edma_start(dma->tx_channel);
+		dmaengine_submit(rxdesc);
+		dmaengine_submit(txdesc);
+
+		dma_async_issue_pending(dspi->dma_rx);
+		dma_async_issue_pending(dspi->dma_tx);
+
 		set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
 	}
 
@@ -690,15 +659,13 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 
 	clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
 	if (spicfg->io_type == SPI_IO_TYPE_DMA) {
-
-		if (t->tx_buf)
-			dma_unmap_single(&spi->dev, t->tx_dma, t->len,
-								DMA_TO_DEVICE);
-
-		dma_unmap_single(&spi->dev, t->rx_dma, rx_buf_count,
-							DMA_FROM_DEVICE);
-
 		clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
+
+		dma_unmap_single(&spi->dev, t->rx_dma,
+				t->len, DMA_FROM_DEVICE);
+		dma_unmap_single(&spi->dev, t->tx_dma,
+				t->len, DMA_TO_DEVICE);
+		kfree(dummy_buf);
 	}
 
 	clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
@@ -716,11 +683,20 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 	}
 
 	if (dspi->rcount != 0 || dspi->wcount != 0) {
-		dev_err(sdev, "SPI data transfer error\n");
+		dev_err(&spi->dev, "SPI data transfer error\n");
 		return -EIO;
 	}
 
 	return t->len;
+
+err_desc:
+	dma_unmap_single(&spi->dev, t->tx_dma, t->len, DMA_TO_DEVICE);
+err_tx_map:
+	dma_unmap_single(&spi->dev, t->rx_dma, t->len, DMA_FROM_DEVICE);
+err_rx_map:
+	kfree(dummy_buf);
+err_alloc_dummy_buf:
+	return ret;
 }
 
 /**
@@ -751,39 +727,33 @@ static irqreturn_t davinci_spi_irq(s32 irq, void *data)
 
 static int davinci_spi_request_dma(struct davinci_spi *dspi)
 {
+	dma_cap_mask_t mask;
+	struct device *sdev = dspi->bitbang.master->dev.parent;
 	int r;
-	struct davinci_spi_dma *dma = &dspi->dma;
 
-	r = edma_alloc_channel(dma->rx_channel, davinci_spi_dma_callback, dspi,
-								dma->eventq);
-	if (r < 0) {
-		pr_err("Unable to request DMA channel for SPI RX\n");
-		r = -EAGAIN;
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	dspi->dma_rx = dma_request_channel(mask, edma_filter_fn,
+					   &dspi->dma_rx_chnum);
+	if (!dspi->dma_rx) {
+		dev_err(sdev, "request RX DMA channel failed\n");
+		r = -ENODEV;
 		goto rx_dma_failed;
 	}
 
-	r = edma_alloc_channel(dma->tx_channel, davinci_spi_dma_callback, dspi,
-								dma->eventq);
-	if (r < 0) {
-		pr_err("Unable to request DMA channel for SPI TX\n");
-		r = -EAGAIN;
+	dspi->dma_tx = dma_request_channel(mask, edma_filter_fn,
+					   &dspi->dma_tx_chnum);
+	if (!dspi->dma_tx) {
+		dev_err(sdev, "request TX DMA channel failed\n");
+		r = -ENODEV;
 		goto tx_dma_failed;
 	}
 
-	r = edma_alloc_slot(EDMA_CTLR(dma->tx_channel), EDMA_SLOT_ANY);
-	if (r < 0) {
-		pr_err("Unable to request SPI TX DMA param slot\n");
-		r = -EAGAIN;
-		goto param_failed;
-	}
-	dma->dummy_param_slot = r;
-	edma_link(dma->dummy_param_slot, dma->dummy_param_slot);
-
 	return 0;
-param_failed:
-	edma_free_channel(dma->tx_channel);
+
 tx_dma_failed:
-	edma_free_channel(dma->rx_channel);
+	dma_release_channel(dspi->dma_rx);
 rx_dma_failed:
 	return r;
 }
@@ -898,9 +868,8 @@ static int __devinit davinci_spi_probe(struct platform_device *pdev)
 	dspi->bitbang.txrx_bufs = davinci_spi_bufs;
 	if (dma_rx_chan != SPI_NO_RESOURCE &&
 	    dma_tx_chan != SPI_NO_RESOURCE) {
-		dspi->dma.rx_channel = dma_rx_chan;
-		dspi->dma.tx_channel = dma_tx_chan;
-		dspi->dma.eventq = pdata->dma_event_q;
+		dspi->dma_rx_chnum = dma_rx_chan;
+		dspi->dma_tx_chnum = dma_tx_chan;
 
 		ret = davinci_spi_request_dma(dspi);
 		if (ret)
@@ -955,9 +924,8 @@ static int __devinit davinci_spi_probe(struct platform_device *pdev)
 	return ret;
 
 free_dma:
-	edma_free_channel(dspi->dma.tx_channel);
-	edma_free_channel(dspi->dma.rx_channel);
-	edma_free_slot(dspi->dma.dummy_param_slot);
+	dma_release_channel(dspi->dma_rx);
+	dma_release_channel(dspi->dma_tx);
 free_clk:
 	clk_disable(dspi->clk);
 	clk_put(dspi->clk);