Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

7 files changed, 21 insertions, 18 deletions

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index fd7cc566095a..d4ac60b4a56e 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1583,7 +1583,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
 	/* Initialize the hardware */
 	ret = clk_prepare_enable(clk);
 	if (ret)
-		goto out_unmap_regs;
+		goto out_free_irq;
 	spi_writel(as, CR, SPI_BIT(SWRST));
 	spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
 	if (as->caps.has_wdrbt) {
@@ -1614,6 +1614,7 @@ out_free_dma:
 	spi_writel(as, CR, SPI_BIT(SWRST));
 	spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
 	clk_disable_unprepare(clk);
+out_free_irq:
 	free_irq(irq, master);
 out_unmap_regs:
 	iounmap(as->regs);
diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c
index 5655acf55bfe..6416798828e7 100644
--- a/drivers/spi/spi-clps711x.c
+++ b/drivers/spi/spi-clps711x.c
@@ -226,7 +226,6 @@ static int spi_clps711x_probe(struct platform_device *pdev)
 			       dev_name(&pdev->dev), hw);
 	if (ret) {
 		dev_err(&pdev->dev, "Can't request IRQ\n");
-		clk_put(hw->spi_clk);
 		goto clk_out;
 	}
 
@@ -247,7 +246,6 @@ err_out:
 			gpio_free(hw->chipselect[i]);
 
 	spi_master_put(master);
-	kfree(master);
 
 	return ret;
 }
@@ -263,7 +261,6 @@ static int spi_clps711x_remove(struct platform_device *pdev)
 			gpio_free(hw->chipselect[i]);
 
 	spi_unregister_master(master);
-	kfree(master);
 
 	return 0;
 }
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 6cd07d13ecab..4e44575bd87a 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -476,15 +476,9 @@ static int dspi_probe(struct platform_device *pdev)
 	master->bus_num = bus_num;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "can't get platform resource\n");
-		ret = -EINVAL;
-		goto out_master_put;
-	}
-
 	dspi->base = devm_ioremap_resource(&pdev->dev, res);
-	if (!dspi->base) {
-		ret = -EINVAL;
+	if (IS_ERR(dspi->base)) {
+		ret = PTR_ERR(dspi->base);
 		goto out_master_put;
 	}
 
diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c
index dbc5e999a1f5..6adf4e35816d 100644
--- a/drivers/spi/spi-mpc512x-psc.c
+++ b/drivers/spi/spi-mpc512x-psc.c
@@ -522,8 +522,10 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
 	psc_num = master->bus_num;
 	snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
 	clk = devm_clk_get(dev, clk_name);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
 		goto free_irq;
+	}
 	ret = clk_prepare_enable(clk);
 	if (ret)
 		goto free_irq;
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 2eb06ee0b326..c1a50674c1e3 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -546,8 +546,17 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
 	if (pm_runtime_suspended(&drv_data->pdev->dev))
 		return IRQ_NONE;
 
-	sccr1_reg = read_SSCR1(reg);
+	/*
+	 * If the device is not yet in RPM suspended state and we get an
+	 * interrupt that is meant for another device, check if status bits
+	 * are all set to one. That means that the device is already
+	 * powered off.
+	 */
 	status = read_SSSR(reg);
+	if (status == ~0)
+		return IRQ_NONE;
+
+	sccr1_reg = read_SSCR1(reg);
 
 	/* Ignore possible writes if we don't need to write */
 	if (!(sccr1_reg & SSCR1_TIE))
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 512b8893893b..a80376dc3a10 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1428,6 +1428,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	       S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN,
 	       sdd->regs + S3C64XX_SPI_INT_EN);
 
+	pm_runtime_enable(&pdev->dev);
+
 	if (spi_register_master(master)) {
 		dev_err(&pdev->dev, "cannot register SPI master\n");
 		ret = -EBUSY;
@@ -1440,8 +1442,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 					mem_res,
 					sdd->rx_dma.dmach, sdd->tx_dma.dmach);
 
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 
 err3:
diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c
index 0b68cb592fa4..e488a90a98b8 100644
--- a/drivers/spi/spi-sh-hspi.c
+++ b/drivers/spi/spi-sh-hspi.c
@@ -296,6 +296,8 @@ static int hspi_probe(struct platform_device *pdev)
 		goto error1;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
 	master->num_chipselect	= 1;
 	master->bus_num		= pdev->id;
 	master->setup		= hspi_setup;
@@ -309,8 +311,6 @@ static int hspi_probe(struct platform_device *pdev)
 		goto error1;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
 	return 0;
 
  error1: