summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_hbadisc.c
diff options
context:
space:
mode:
authorJames Smart <james.smart@emulex.com>2011-12-13 13:22:17 -0500
committerJames Bottomley <JBottomley@Parallels.com>2011-12-15 10:57:44 +0400
commitdf9e1b59f9e4671930a7762b9518461df4ea85f5 (patch)
treeb5e81d6b02f138cb272c7f9020828184dccdb966 /drivers/scsi/lpfc/lpfc_hbadisc.c
parentcb69f7decc3777822b240c46890a209df288c7bb (diff)
downloadtalos-obmc-linux-df9e1b59f9e4671930a7762b9518461df4ea85f5.tar.gz
talos-obmc-linux-df9e1b59f9e4671930a7762b9518461df4ea85f5.zip
[SCSI] Lpfc 8.3.28: FC and SCSI Discovery Fixes
FC and SCSI Discovery Fixes: - Clear the virtual fabrics bit (word 1 bit 30) when sending the FLOGI and FDISC. (CR 124339) - Return a MLQUEUE_DEVICE_BUSY if the driver detects that an I/O is being retried too quickly (CR 124668) - Remove NDLP reference put in lpfc_cmpl_els_logo_acc for all but fabric nodes (CR 123924) - Only retry FDISCs every second and stop retrying after devloss number of retries (CR 13939) - Check to see if vports are unloading before adding them to the vport work array. (CR 124996) - Fixed illegal state transition during driver unload (CR 124191) - Added missing protection on setting/clearing of vport->fc_flag bit (CR 126002) - Set NPIV flag in lpfc_mbx_process_link_up for all ports sli3 and above. (CR 126094) - Clear FCP command bytes that are not used. (CR 126209) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_hbadisc.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c29
1 files changed, 23 insertions, 6 deletions
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 99c76677e394..d96498581ebe 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2646,9 +2646,14 @@ lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
{
struct lpfc_vport *vport = mboxq->vport;
- /* VFI not supported on interface type 0, just do the flogi */
- if (mboxq->u.mb.mbxStatus && (bf_get(lpfc_sli_intf_if_type,
- &phba->sli4_hba.sli_intf) != LPFC_SLI_INTF_IF_TYPE_0)) {
+ /*
+ * VFI not supported on interface type 0, just do the flogi
+ * Also continue if the VFI is in use - just use the same one.
+ */
+ if (mboxq->u.mb.mbxStatus &&
+ (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_0) &&
+ mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
lpfc_printf_vlog(vport, KERN_ERR,
LOG_MBOX,
"2891 Init VFI mailbox failed 0x%x\n",
@@ -2922,6 +2927,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
{
struct lpfc_vport *vport = phba->pport;
LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
+ struct Scsi_Host *shost;
int i;
struct lpfc_dmabuf *mp;
int rc;
@@ -2945,6 +2951,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la);
phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
+ shost = lpfc_shost_from_vport(vport);
if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
@@ -2956,8 +2963,11 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
"1309 Link Up Event npiv not supported in loop "
"topology\n");
/* Get Loop Map information */
- if (bf_get(lpfc_mbx_read_top_il, la))
+ if (bf_get(lpfc_mbx_read_top_il, la)) {
+ spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_LBIT;
+ spin_unlock_irq(shost->host_lock);
+ }
vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
i = la->lilpBde64.tus.f.bdeSize;
@@ -3002,11 +3012,13 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
} else {
if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
if (phba->max_vpi && phba->cfg_enable_npiv &&
- (phba->sli_rev == 3))
+ (phba->sli_rev >= LPFC_SLI_REV3))
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
}
vport->fc_myDID = phba->fc_pref_DID;
+ spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_LBIT;
+ spin_unlock_irq(shost->host_lock);
}
spin_unlock_irq(&phba->hbalock);
@@ -3593,6 +3605,7 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
ndlp = (struct lpfc_nodelist *) pmb->context2;
pmb->context1 = NULL;
@@ -3638,8 +3651,12 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
* vport discovery */
if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
lpfc_start_fdiscs(phba);
- else
+ else {
+ shost = lpfc_shost_from_vport(vport);
+ spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ;
+ spin_unlock_irq(shost->host_lock);
+ }
lpfc_do_scr_ns_plogi(phba, vport);
}
OpenPOWER on IntegriCloud