summaryrefslogtreecommitdiffstats
path: root/drivers/net/gianfar.h
diff options
context:
space:
mode:
authorSandeep Gopalpet <Sandeep.Kumar@freescale.com>2009-11-02 07:03:34 +0000
committerDavid S. Miller <davem@davemloft.net>2009-11-02 23:40:59 -0800
commit46ceb60ca80fa07703bc6eb8f4651f900dff5a82 (patch)
tree9bd694c3b1559cbd0fa72bff1f521ce4bcc95aa6 /drivers/net/gianfar.h
parent2e0246c72fa2e2b61865a2d5aaff1cc9155b9447 (diff)
downloadtalos-obmc-linux-46ceb60ca80fa07703bc6eb8f4651f900dff5a82.tar.gz
talos-obmc-linux-46ceb60ca80fa07703bc6eb8f4651f900dff5a82.zip
gianfar: Add Multiple group Support
This patch introduces multiple group support for etsec2.0 devices. Multiple group support is provided by mapping the set of enabled queues to different groups and then programming the per group regsiters imask, ievent, rstat, tstat. The queues corresponding to a group are indicated by programming isrg (interrupt steering) registers. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/gianfar.h')
-rw-r--r--drivers/net/gianfar.h29
1 files changed, 28 insertions, 1 deletions
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 08518c205035..a2c1f963cdd6 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -79,6 +79,9 @@ extern const char gfar_driver_version[];
#define MAX_TX_QS 0x8
#define MAX_RX_QS 0x8
+/* MAXIMUM NUMBER OF GROUPS SUPPORTED */
+#define MAXGROUPS 0x2
+
/* These need to be powers of 2 for this driver */
#define DEFAULT_TX_RING_SIZE 256
#define DEFAULT_RX_RING_SIZE 256
@@ -795,7 +798,24 @@ struct gfar {
#define FSL_GIANFAR_DEV_HAS_BD_STASHING 0x00000200
#define FSL_GIANFAR_DEV_HAS_BUF_STASHING 0x00000400
+#if (MAXGROUPS == 2)
+#define DEFAULT_MAPPING 0xAA
+#else
#define DEFAULT_MAPPING 0xFF
+#endif
+
+#define ISRG_SHIFT_TX 0x10
+#define ISRG_SHIFT_RX 0x18
+
+/* The same driver can operate in two modes */
+/* SQ_SG_MODE: Single Queue Single Group Mode
+ * (Backward compatible mode)
+ * MQ_MG_MODE: Multi Queue Multi Group mode
+ */
+enum {
+ SQ_SG_MODE = 0,
+ MQ_MG_MODE
+};
/**
* struct gfar_priv_tx_q - per tx queue structure
@@ -825,6 +845,7 @@ struct gfar_priv_tx_q {
struct txbd8 *cur_tx;
struct txbd8 *dirty_tx;
struct net_device *dev;
+ struct gfar_priv_grp *grp;
u16 skb_curtx;
u16 skb_dirtytx;
u16 qindex;
@@ -858,6 +879,7 @@ struct gfar_priv_rx_q {
struct rxbd8 *rx_bd_base;
struct rxbd8 *cur_rx;
struct net_device *dev;
+ struct gfar_priv_grp *grp;
u16 skb_currx;
u16 qindex;
unsigned int rx_ring_size;
@@ -885,6 +907,7 @@ struct gfar_priv_grp {
struct napi_struct napi;
struct gfar_private *priv;
struct gfar __iomem *regs;
+ unsigned int grp_id;
unsigned int rx_bit_map;
unsigned int tx_bit_map;
unsigned int num_tx_queues;
@@ -916,6 +939,8 @@ struct gfar_private {
/* Indicates how many tx, rx queues are enabled */
unsigned int num_tx_queues;
unsigned int num_rx_queues;
+ unsigned int num_grps;
+ unsigned int mode;
/* The total tx and rx ring size for the enabled queues */
unsigned int total_tx_ring_size;
@@ -925,7 +950,7 @@ struct gfar_private {
struct net_device *ndev;
struct of_device *ofdev;
- struct gfar_priv_grp gfargrp;
+ struct gfar_priv_grp gfargrp[MAXGROUPS];
struct gfar_priv_tx_q *tx_queue[MAX_TX_QS];
struct gfar_priv_rx_q *rx_queue[MAX_RX_QS];
@@ -999,6 +1024,8 @@ extern void stop_gfar(struct net_device *dev);
extern void gfar_halt(struct net_device *dev);
extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
int enable, u32 regnum, u32 read);
+extern void gfar_configure_coalescing(struct gfar_private *priv,
+ unsigned int tx_mask, unsigned int rx_mask);
void gfar_init_sysfs(struct net_device *dev);
extern const struct ethtool_ops gfar_ethtool_ops;
OpenPOWER on IntegriCloud