bnx2x: Control number of vfs dynamically

1. Support sysfs interface for getting the maximal number of virtual functions
   of a given physical function.
2. Support sysfs interface for getting and setting the current number of
   virtual functions.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 91 insertions, 44 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index d62d037b2928..33fbdfdc8e12 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1281,6 +1281,8 @@ struct bnx2x {
 	dma_addr_t		pf2vf_bulletin_mapping;
 
 	struct pf_vf_bulletin_content	old_bulletin;
+
+	u16 requested_nr_virtfn;
 #endif /* CONFIG_BNX2X_SRIOV */
 
 	struct net_device	*dev;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 9be9b0373ca9..f685d2e77fcb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9546,8 +9546,10 @@ sp_rtnl_not_reset:
 
 	/* enable SR-IOV if applicable */
 	if (IS_SRIOV(bp) && test_and_clear_bit(BNX2X_SP_RTNL_ENABLE_SRIOV,
-					       &bp->sp_rtnl_state))
+					       &bp->sp_rtnl_state)) {
+		bnx2x_disable_sriov(bp);
 		bnx2x_enable_sriov(bp);
+	}
 }
 
 static void bnx2x_period_task(struct work_struct *work)
@@ -11423,26 +11425,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
  * net_device service functions
  */
 
-static int bnx2x_open_epilog(struct bnx2x *bp)
-{
-	/* Enable sriov via delayed work. This must be done via delayed work
-	 * because it causes the probe of the vf devices to be run, which invoke
-	 * register_netdevice which must have rtnl lock taken. As we are holding
-	 * the lock right now, that could only work if the probe would not take
-	 * the lock. However, as the probe of the vf may be called from other
-	 * contexts as well (such as passthrough to vm failes) it can't assume
-	 * the lock is being held for it. Using delayed work here allows the
-	 * probe code to simply take the lock (i.e. wait for it to be released
-	 * if it is being held).
-	 */
-	smp_mb__before_clear_bit();
-	set_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, &bp->sp_rtnl_state);
-	smp_mb__after_clear_bit();
-	schedule_delayed_work(&bp->sp_rtnl_task, 0);
-
-	return 0;
-}
-
 /* called with rtnl_lock */
 static int bnx2x_open(struct net_device *dev)
 {
@@ -12498,13 +12480,8 @@ static int bnx2x_init_one(struct pci_dev *pdev,
 			goto init_one_exit;
 	}
 
-	/* Enable SRIOV if capability found in configuration space.
-	 * Once the generic SR-IOV framework makes it in from the
-	 * pci tree this will be revised, to allow dynamic control
-	 * over the number of VFs. Right now, change the num of vfs
-	 * param below to enable SR-IOV.
-	 */
-	rc = bnx2x_iov_init_one(bp, int_mode, 0/*num vfs*/);
+	/* Enable SRIOV if capability found in configuration space */
+	rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS);
 	if (rc)
 		goto init_one_exit;
 
@@ -12820,6 +12797,9 @@ static struct pci_driver bnx2x_pci_driver = {
 	.suspend     = bnx2x_suspend,
 	.resume      = bnx2x_resume,
 	.err_handler = &bnx2x_err_handler,
+#ifdef CONFIG_BNX2X_SRIOV
+	.sriov_configure = bnx2x_sriov_configure,
+#endif
 };
 
 static int __init bnx2x_init(void)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 7b234e41fea8..df930e30e1b1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1467,7 +1467,6 @@ static u8 bnx2x_vf_is_pcie_pending(struct bnx2x *bp, u8 abs_vfid)
 		return bnx2x_is_pcie_pending(dev);
 
 unknown_dev:
-	BNX2X_ERR("Unknown device\n");
 	return false;
 }
 
@@ -1972,8 +1971,10 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
 	if (iov->total == 0)
 		goto failed;
 
-	/* calculate the actual number of VFs */
-	iov->nr_virtfn = min_t(u16, iov->total, (u16)num_vfs_param);
+	iov->nr_virtfn = min_t(u16, iov->total, num_vfs_param);
+
+	DP(BNX2X_MSG_IOV, "num_vfs_param was %d, nr_virtfn was %d\n",
+	   num_vfs_param, iov->nr_virtfn);
 
 	/* allocate the vf array */
 	bp->vfdb->vfs = kzalloc(sizeof(struct bnx2x_virtf) *
@@ -3020,21 +3021,47 @@ void bnx2x_unlock_vf_pf_channel(struct bnx2x *bp, struct bnx2x_virtf *vf,
 	vf->op_current = CHANNEL_TLV_NONE;
 }
 
-void bnx2x_enable_sriov(struct bnx2x *bp)
+int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs_param)
 {
-	int rc = 0;
 
-	/* disbale sriov in case it is still enabled */
-	pci_disable_sriov(bp->pdev);
-	DP(BNX2X_MSG_IOV, "sriov disabled\n");
+	struct bnx2x *bp = netdev_priv(pci_get_drvdata(dev));
 
-	/* enable sriov */
-	DP(BNX2X_MSG_IOV, "vf num (%d)\n", (bp->vfdb->sriov.nr_virtfn));
-	rc = pci_enable_sriov(bp->pdev, (bp->vfdb->sriov.nr_virtfn));
-	if (rc)
+	DP(BNX2X_MSG_IOV, "bnx2x_sriov_configure called with %d, BNX2X_NR_VIRTFN(bp) was %d\n",
+	   num_vfs_param, BNX2X_NR_VIRTFN(bp));
+
+	/* HW channel is only operational when PF is up */
+	if (bp->state != BNX2X_STATE_OPEN) {
+		BNX2X_ERR("VF num configurtion via sysfs not supported while PF is down");
+		return -EINVAL;
+	}
+
+	/* we are always bound by the total_vfs in the configuration space */
+	if (num_vfs_param > BNX2X_NR_VIRTFN(bp)) {
+		BNX2X_ERR("truncating requested number of VFs (%d) down to maximum allowed (%d)\n",
+			  num_vfs_param, BNX2X_NR_VIRTFN(bp));
+		num_vfs_param = BNX2X_NR_VIRTFN(bp);
+	}
+
+	bp->requested_nr_virtfn = num_vfs_param;
+	if (num_vfs_param == 0) {
+		pci_disable_sriov(dev);
+		return 0;
+	} else {
+		return bnx2x_enable_sriov(bp);
+	}
+}
+
+int bnx2x_enable_sriov(struct bnx2x *bp)
+{
+	int rc = 0, req_vfs = bp->requested_nr_virtfn;
+
+	rc = pci_enable_sriov(bp->pdev, req_vfs);
+	if (rc) {
 		BNX2X_ERR("pci_enable_sriov failed with %d\n", rc);
-	else
-		DP(BNX2X_MSG_IOV, "sriov enabled\n");
+		return rc;
+	}
+	DP(BNX2X_MSG_IOV, "sriov enabled (%d vfs)\n", req_vfs);
+	return req_vfs;
 }
 
 void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp)
@@ -3050,6 +3077,11 @@ void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp)
 	}
 }
 
+void bnx2x_disable_sriov(struct bnx2x *bp)
+{
+	pci_disable_sriov(bp->pdev);
+}
+
 static int bnx2x_vf_ndo_sanity(struct bnx2x *bp, int vfidx,
 			       struct bnx2x_virtf *vf)
 {
@@ -3087,6 +3119,10 @@ int bnx2x_get_vf_config(struct net_device *dev, int vfidx,
 	rc = bnx2x_vf_ndo_sanity(bp, vfidx, vf);
 	if (rc)
 		return rc;
+	if (!mac_obj || !vlan_obj || !bulletin) {
+		BNX2X_ERR("VF partially initialized\n");
+		return -EINVAL;
+	}
 
 	ivi->vf = vfidx;
 	ivi->qos = 0;
@@ -3405,3 +3441,26 @@ alloc_mem_err:
 		       sizeof(union pf_vf_bulletin));
 	return -ENOMEM;
 }
+
+int bnx2x_open_epilog(struct bnx2x *bp)
+{
+	/* Enable sriov via delayed work. This must be done via delayed work
+	 * because it causes the probe of the vf devices to be run, which invoke
+	 * register_netdevice which must have rtnl lock taken. As we are holding
+	 * the lock right now, that could only work if the probe would not take
+	 * the lock. However, as the probe of the vf may be called from other
+	 * contexts as well (such as passthrough to vm failes) it can't assume
+	 * the lock is being held for it. Using delayed work here allows the
+	 * probe code to simply take the lock (i.e. wait for it to be released
+	 * if it is being held). We only want to do this if the number of VFs
+	 * was set before PF driver was loaded.
+	 */
+	if (IS_SRIOV(bp) && BNX2X_NR_VIRTFN(bp)) {
+		smp_mb__before_clear_bit();
+		set_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, &bp->sp_rtnl_state);
+		smp_mb__after_clear_bit();
+		schedule_delayed_work(&bp->sp_rtnl_task, 0);
+	}
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index 33d49516fcea..a10bdb2fd900 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -753,12 +753,15 @@ static inline int bnx2x_vf_ustorm_prods_offset(struct bnx2x *bp,
 enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp);
 void bnx2x_vf_map_doorbells(struct bnx2x *bp);
 int bnx2x_vf_pci_alloc(struct bnx2x *bp);
-void bnx2x_enable_sriov(struct bnx2x *bp);
+int bnx2x_enable_sriov(struct bnx2x *bp);
+void bnx2x_disable_sriov(struct bnx2x *bp);
 static inline int bnx2x_vf_headroom(struct bnx2x *bp)
 {
 	return bp->vfdb->sriov.nr_virtfn * BNX2X_CLIENTS_PER_VF;
 }
 void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp);
+int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs);
+int bnx2x_open_epilog(struct bnx2x *bp);
 
 #else /* CONFIG_BNX2X_SRIOV */
 
@@ -781,7 +784,8 @@ static inline void bnx2x_iov_init_dmae(struct bnx2x *bp) {}
 static inline int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
 				     int num_vfs_param) {return 0; }
 static inline void bnx2x_iov_remove_one(struct bnx2x *bp) {}
-static inline void bnx2x_enable_sriov(struct bnx2x *bp) {}
+static inline int bnx2x_enable_sriov(struct bnx2x *bp) {return 0; }
+static inline void bnx2x_disable_sriov(struct bnx2x *bp) {}
 static inline int bnx2x_vfpf_acquire(struct bnx2x *bp,
 				     u8 tx_count, u8 rx_count) {return 0; }
 static inline int bnx2x_vfpf_release(struct bnx2x *bp) {return 0; }
@@ -807,6 +811,8 @@ static inline enum sample_bulletin_result bnx2x_sample_bulletin(struct bnx2x *bp
 static inline int bnx2x_vf_map_doorbells(struct bnx2x *bp) {return 0; }
 static inline int bnx2x_vf_pci_alloc(struct bnx2x *bp) {return 0; }
 static inline void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) {}
+static inline int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs) {return 0; }
+static inline int bnx2x_open_epilog(struct bnx2x *bp) {return 0; }
 
 #endif /* CONFIG_BNX2X_SRIOV */
 #endif /* bnx2x_sriov.h */