Merge tag 'v3.3' into staging/for_v3.4

* tag 'v3.3': (1646 commits)
  Linux 3.3
  Don't limit non-nested epoll paths
  netfilter: ctnetlink: fix race between delete and timeout expiration
  ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
  nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
  nilfs2: clamp ns_r_segments_percentage to [1, 99]
  afs: Remote abort can cause BUG in rxrpc code
  afs: Read of file returns EBADMSG
  C6X: remove dead code from entry.S
  wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
  net/hyperv: fix erroneous NETDEV_TX_BUSY use
  net/usbnet: reserve headroom on rx skbs
  bnx2x: fix memory leak in bnx2x_init_firmware()
  bnx2x: fix a crash on corrupt firmware file
  sch_sfq: revert dont put new flow at the end of flows
  ipv6: fix icmp6_dst_alloc()
  MAINTAINERS: Add Serge as maintainer of capabilities
  drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
  MAINTAINERS: add entry for exynos mipi display drivers
  MAINTAINERS: fix link to Gustavo Padovans tree
  ...

1 files changed, 32 insertions, 47 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index ffeaaa95ed96..b69f8762b339 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -117,10 +117,6 @@ static int dropless_fc;
 module_param(dropless_fc, int, 0);
 MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
 
-static int poll;
-module_param(poll, int, 0);
-MODULE_PARM_DESC(poll, " Use polling (for debug)");
-
 static int mrrs = -1;
 module_param(mrrs, int, 0);
 MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
@@ -941,7 +937,7 @@ void bnx2x_panic_dump(struct bnx2x *bp)
 			struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j];
 
 			BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x]  sw_bd=[%p]\n",
-				  i, j, rx_bd[1], rx_bd[0], sw_bd->skb);
+				  i, j, rx_bd[1], rx_bd[0], sw_bd->data);
 		}
 
 		start = RX_SGE(fp->rx_sge_prod);
@@ -4834,20 +4830,11 @@ void bnx2x_drv_pulse(struct bnx2x *bp)
 
 static void bnx2x_timer(unsigned long data)
 {
-	u8 cos;
 	struct bnx2x *bp = (struct bnx2x *) data;
 
 	if (!netif_running(bp->dev))
 		return;
 
-	if (poll) {
-		struct bnx2x_fastpath *fp = &bp->fp[0];
-
-		for_each_cos_in_tx_queue(fp, cos)
-			bnx2x_tx_int(bp, &fp->txdata[cos]);
-		bnx2x_rx_int(fp, 1000);
-	}
-
 	if (!BP_NOMCP(bp)) {
 		int mb_idx = BP_FW_MB_IDX(bp);
 		u32 drv_pulse;
@@ -10063,7 +10050,6 @@ static void __devinit bnx2x_set_modes_bitmap(struct bnx2x *bp)
 static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 {
 	int func;
-	int timer_interval;
 	int rc;
 
 	mutex_init(&bp->port.phy_mutex);
@@ -10139,8 +10125,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	bp->tx_ticks = (50 / BNX2X_BTR) * BNX2X_BTR;
 	bp->rx_ticks = (25 / BNX2X_BTR) * BNX2X_BTR;
 
-	timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
-	bp->current_interval = (poll ? poll : timer_interval);
+	bp->current_interval = CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ;
 
 	init_timer(&bp->timer);
 	bp->timer.expires = jiffies + bp->current_interval;
@@ -10536,6 +10521,9 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 {
 	struct bnx2x *bp;
 	int rc;
+	bool chip_is_e1x = (board_type == BCM57710 ||
+			    board_type == BCM57711 ||
+			    board_type == BCM57711E);
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	bp = netdev_priv(dev);
@@ -10624,7 +10612,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
 	REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
 
-	if (CHIP_IS_E1x(bp)) {
+	if (chip_is_e1x) {
 		REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
 		REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
 		REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
@@ -10635,9 +10623,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	 * Enable internal target-read (in case we are probed after PF FLR).
 	 * Must be done prior to any BAR read access. Only for 57712 and up
 	 */
-	if (board_type != BCM57710 &&
-	    board_type != BCM57711 &&
-	    board_type != BCM57711E)
+	if (!chip_is_e1x)
 		REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1);
 
 	/* Reset the load counter */
@@ -10838,38 +10824,36 @@ do {									\
 
 int bnx2x_init_firmware(struct bnx2x *bp)
 {
+	const char *fw_file_name;
 	struct bnx2x_fw_file_hdr *fw_hdr;
 	int rc;
 
+	if (bp->firmware)
+		return 0;
 
-	if (!bp->firmware) {
-		const char *fw_file_name;
-
-		if (CHIP_IS_E1(bp))
-			fw_file_name = FW_FILE_NAME_E1;
-		else if (CHIP_IS_E1H(bp))
-			fw_file_name = FW_FILE_NAME_E1H;
-		else if (!CHIP_IS_E1x(bp))
-			fw_file_name = FW_FILE_NAME_E2;
-		else {
-			BNX2X_ERR("Unsupported chip revision\n");
-			return -EINVAL;
-		}
-		BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
+	if (CHIP_IS_E1(bp))
+		fw_file_name = FW_FILE_NAME_E1;
+	else if (CHIP_IS_E1H(bp))
+		fw_file_name = FW_FILE_NAME_E1H;
+	else if (!CHIP_IS_E1x(bp))
+		fw_file_name = FW_FILE_NAME_E2;
+	else {
+		BNX2X_ERR("Unsupported chip revision\n");
+		return -EINVAL;
+	}
+	BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
 
-		rc = request_firmware(&bp->firmware, fw_file_name,
-				      &bp->pdev->dev);
-		if (rc) {
-			BNX2X_ERR("Can't load firmware file %s\n",
-				  fw_file_name);
-			goto request_firmware_exit;
-		}
+	rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev);
+	if (rc) {
+		BNX2X_ERR("Can't load firmware file %s\n",
+			  fw_file_name);
+		goto request_firmware_exit;
+	}
 
-		rc = bnx2x_check_firmware(bp);
-		if (rc) {
-			BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
-			goto request_firmware_exit;
-		}
+	rc = bnx2x_check_firmware(bp);
+	if (rc) {
+		BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
+		goto request_firmware_exit;
 	}
 
 	fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data;
@@ -10915,6 +10899,7 @@ init_ops_alloc_err:
 	kfree(bp->init_data);
 request_firmware_exit:
 	release_firmware(bp->firmware);
+	bp->firmware = NULL;
 
 	return rc;
 }