Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

1 files changed, 268 insertions, 0 deletions

diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_param.c b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c
new file mode 100644
index 000000000000..0ce60b6e7ef0
--- /dev/null
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_param.c
@@ -0,0 +1,268 @@
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/netdevice.h>
+
+#include "atl1e.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define ATL1E_MAX_NIC 32
+
+#define OPTION_UNSET    -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED  1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+#define ATL1E_PARAM_INIT { [0 ... ATL1E_MAX_NIC] = OPTION_UNSET }
+
+#define ATL1E_PARAM(x, desc) \
+	static int __devinitdata x[ATL1E_MAX_NIC + 1] = ATL1E_PARAM_INIT; \
+	static unsigned int num_##x; \
+	module_param_array_named(x, x, int, &num_##x, 0); \
+	MODULE_PARM_DESC(x, desc);
+
+/* Transmit Memory count
+ *
+ * Valid Range: 64-2048
+ *
+ * Default Value: 128
+ */
+#define ATL1E_MIN_TX_DESC_CNT		32
+#define ATL1E_MAX_TX_DESC_CNT		1020
+#define ATL1E_DEFAULT_TX_DESC_CNT	128
+ATL1E_PARAM(tx_desc_cnt, "Transmit description count");
+
+/* Receive Memory Block Count
+ *
+ * Valid Range: 16-512
+ *
+ * Default Value: 128
+ */
+#define ATL1E_MIN_RX_MEM_SIZE		8    /* 8KB   */
+#define ATL1E_MAX_RX_MEM_SIZE		1024 /* 1MB   */
+#define ATL1E_DEFAULT_RX_MEM_SIZE	256  /* 128KB */
+ATL1E_PARAM(rx_mem_size, "memory size of rx buffer(KB)");
+
+/* User Specified MediaType Override
+ *
+ * Valid Range: 0-5
+ *  - 0    - auto-negotiate at all supported speeds
+ *  - 1    - only link at 100Mbps Full Duplex
+ *  - 2    - only link at 100Mbps Half Duplex
+ *  - 3    - only link at 10Mbps Full Duplex
+ *  - 4    - only link at 10Mbps Half Duplex
+ * Default Value: 0
+ */
+
+ATL1E_PARAM(media_type, "MediaType Select");
+
+/* Interrupt Moderate Timer in units of 2 us
+ *
+ * Valid Range: 10-65535
+ *
+ * Default Value: 45000(90ms)
+ */
+#define INT_MOD_DEFAULT_CNT             100 /* 200us */
+#define INT_MOD_MAX_CNT                 65000
+#define INT_MOD_MIN_CNT                 50
+ATL1E_PARAM(int_mod_timer, "Interrupt Moderator Timer");
+
+#define AUTONEG_ADV_DEFAULT  0x2F
+#define AUTONEG_ADV_MASK     0x2F
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
+
+#define FLASH_VENDOR_DEFAULT    0
+#define FLASH_VENDOR_MIN        0
+#define FLASH_VENDOR_MAX        2
+
+struct atl1e_option {
+	enum { enable_option, range_option, list_option } type;
+	char *name;
+	char *err;
+	int  def;
+	union {
+		struct { /* range_option info */
+			int min;
+			int max;
+		} r;
+		struct { /* list_option info */
+			int nr;
+			struct atl1e_opt_list { int i; char *str; } *p;
+		} l;
+	} arg;
+};
+
+static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct atl1e_adapter *adapter)
+{
+	if (*value == OPTION_UNSET) {
+		*value = opt->def;
+		return 0;
+	}
+
+	switch (opt->type) {
+	case enable_option:
+		switch (*value) {
+		case OPTION_ENABLED:
+			netdev_info(adapter->netdev,
+				    "%s Enabled\n", opt->name);
+			return 0;
+		case OPTION_DISABLED:
+			netdev_info(adapter->netdev,
+				    "%s Disabled\n", opt->name);
+			return 0;
+		}
+		break;
+	case range_option:
+		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+			netdev_info(adapter->netdev, "%s set to %i\n",
+				    opt->name, *value);
+			return 0;
+		}
+		break;
+	case list_option:{
+			int i;
+			struct atl1e_opt_list *ent;
+
+			for (i = 0; i < opt->arg.l.nr; i++) {
+				ent = &opt->arg.l.p[i];
+				if (*value == ent->i) {
+					if (ent->str[0] != '\0')
+						netdev_info(adapter->netdev,
+							    "%s\n", ent->str);
+					return 0;
+				}
+			}
+			break;
+		}
+	default:
+		BUG();
+	}
+
+	netdev_info(adapter->netdev, "Invalid %s specified (%i) %s\n",
+		    opt->name, *value, opt->err);
+	*value = opt->def;
+	return -1;
+}
+
+/*
+ * atl1e_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input.  If an invalid value is given, or if no user specified
+ * value exists, a default value is used.  The final value is stored
+ * in a variable in the adapter structure.
+ */
+void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
+{
+	int bd = adapter->bd_number;
+
+	if (bd >= ATL1E_MAX_NIC) {
+		netdev_notice(adapter->netdev,
+			      "no configuration for board #%i\n", bd);
+		netdev_notice(adapter->netdev,
+			      "Using defaults for all values\n");
+	}
+
+	{ 		/* Transmit Ring Size */
+		struct atl1e_option opt = {
+			.type = range_option,
+			.name = "Transmit Ddescription Count",
+			.err  = "using default of "
+				__MODULE_STRING(ATL1E_DEFAULT_TX_DESC_CNT),
+			.def  = ATL1E_DEFAULT_TX_DESC_CNT,
+			.arg  = { .r = { .min = ATL1E_MIN_TX_DESC_CNT,
+					 .max = ATL1E_MAX_TX_DESC_CNT} }
+		};
+		int val;
+		if (num_tx_desc_cnt > bd) {
+			val = tx_desc_cnt[bd];
+			atl1e_validate_option(&val, &opt, adapter);
+			adapter->tx_ring.count = (u16) val & 0xFFFC;
+		} else
+			adapter->tx_ring.count = (u16)opt.def;
+	}
+
+	{ 		/* Receive Memory Block Count */
+		struct atl1e_option opt = {
+			.type = range_option,
+			.name = "Memory size of rx buffer(KB)",
+			.err  = "using default of "
+				__MODULE_STRING(ATL1E_DEFAULT_RX_MEM_SIZE),
+			.def  = ATL1E_DEFAULT_RX_MEM_SIZE,
+			.arg  = { .r = { .min = ATL1E_MIN_RX_MEM_SIZE,
+					 .max = ATL1E_MAX_RX_MEM_SIZE} }
+		};
+		int val;
+		if (num_rx_mem_size > bd) {
+			val = rx_mem_size[bd];
+			atl1e_validate_option(&val, &opt, adapter);
+			adapter->rx_ring.page_size = (u32)val * 1024;
+		} else {
+			adapter->rx_ring.page_size = (u32)opt.def * 1024;
+		}
+	}
+
+	{ 		/* Interrupt Moderate Timer */
+		struct atl1e_option opt = {
+			.type = range_option,
+			.name = "Interrupt Moderate Timer",
+			.err  = "using default of "
+				__MODULE_STRING(INT_MOD_DEFAULT_CNT),
+			.def  = INT_MOD_DEFAULT_CNT,
+			.arg  = { .r = { .min = INT_MOD_MIN_CNT,
+					 .max = INT_MOD_MAX_CNT} }
+		} ;
+		int val;
+		if (num_int_mod_timer > bd) {
+			val = int_mod_timer[bd];
+			atl1e_validate_option(&val, &opt, adapter);
+			adapter->hw.imt = (u16) val;
+		} else
+			adapter->hw.imt = (u16)(opt.def);
+	}
+
+	{ 		/* MediaType */
+		struct atl1e_option opt = {
+			.type = range_option,
+			.name = "Speed/Duplex Selection",
+			.err  = "using default of "
+				__MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR),
+			.def  = MEDIA_TYPE_AUTO_SENSOR,
+			.arg  = { .r = { .min = MEDIA_TYPE_AUTO_SENSOR,
+					 .max = MEDIA_TYPE_10M_HALF} }
+		} ;
+		int val;
+		if (num_media_type > bd) {
+			val = media_type[bd];
+			atl1e_validate_option(&val, &opt, adapter);
+			adapter->hw.media_type = (u16) val;
+		} else
+			adapter->hw.media_type = (u16)(opt.def);
+
+	}
+}