Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)

11 files changed, 754 insertions, 242 deletions

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index f654db9121de..a4a0d2b6eb1c 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 4dc02c71ffd6..307a72f483ee 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -359,6 +359,7 @@
 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE       0x00000001
 #define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE       0x00000008
 #define E1000_EXTCNF_CTRL_SWFLAG                 0x00000020
+#define E1000_EXTCNF_CTRL_GATE_PHY_CFG           0x00000080
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK   0x00FF0000
 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT          16
 #define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK   0x0FFF0000
@@ -714,6 +715,7 @@
 #define BME1000_E_PHY_ID_R2  0x01410CB1
 #define I82577_E_PHY_ID      0x01540050
 #define I82578_E_PHY_ID      0x004DD040
+#define I82579_E_PHY_ID      0x01540090
 
 /* M88E1000 Specific Registers */
 #define M88E1000_PHY_SPEC_CTRL     0x10  /* PHY Specific Control Register */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index c0b3db40bd73..f9a31c82f871 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -164,6 +164,7 @@ enum e1000_boards {
 	board_ich9lan,
 	board_ich10lan,
 	board_pchlan,
+	board_pch2lan,
 };
 
 struct e1000_queue_stats {
@@ -347,6 +348,7 @@ struct e1000_adapter {
 	u32 test_icr;
 
 	u32 msg_enable;
+	unsigned int num_vectors;
 	struct msix_entry *msix_entries;
 	int int_mode;
 	u32 eiac_mask;
@@ -421,6 +423,8 @@ struct e1000_info {
 #define FLAG2_HAS_PHY_WAKEUP              (1 << 1)
 #define FLAG2_IS_DISCARDING               (1 << 2)
 #define FLAG2_DISABLE_ASPM_L1             (1 << 3)
+#define FLAG2_HAS_PHY_STATS               (1 << 4)
+#define FLAG2_HAS_EEE                     (1 << 5)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
@@ -458,7 +462,6 @@ extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
 extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
 extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
 extern void e1000e_update_stats(struct e1000_adapter *adapter);
-extern bool e1000e_has_link(struct e1000_adapter *adapter);
 extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
 extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
 extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
@@ -476,6 +479,7 @@ extern struct e1000_info e1000_ich8_info;
 extern struct e1000_info e1000_ich9_info;
 extern struct e1000_info e1000_ich10_info;
 extern struct e1000_info e1000_pch_info;
+extern struct e1000_info e1000_pch2_info;
 extern struct e1000_info e1000_es2_info;
 
 extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
@@ -494,6 +498,8 @@ extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
 extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
 
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 38d79a669059..45aebb4a6fe1 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 2c521218102b..6355a1b779d3 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -118,7 +118,6 @@ static int e1000_get_settings(struct net_device *netdev,
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	u32 status;
 
 	if (hw->phy.media_type == e1000_media_type_copper) {
 
@@ -156,22 +155,29 @@ static int e1000_get_settings(struct net_device *netdev,
 		ecmd->transceiver = XCVR_EXTERNAL;
 	}
 
-	status = er32(STATUS);
-	if (status & E1000_STATUS_LU) {
-		if (status & E1000_STATUS_SPEED_1000)
-			ecmd->speed = 1000;
-		else if (status & E1000_STATUS_SPEED_100)
-			ecmd->speed = 100;
-		else
-			ecmd->speed = 10;
+	ecmd->speed = -1;
+	ecmd->duplex = -1;
 
-		if (status & E1000_STATUS_FD)
-			ecmd->duplex = DUPLEX_FULL;
-		else
-			ecmd->duplex = DUPLEX_HALF;
+	if (netif_running(netdev)) {
+		if (netif_carrier_ok(netdev)) {
+			ecmd->speed = adapter->link_speed;
+			ecmd->duplex = adapter->link_duplex - 1;
+		}
 	} else {
-		ecmd->speed = -1;
-		ecmd->duplex = -1;
+		u32 status = er32(STATUS);
+		if (status & E1000_STATUS_LU) {
+			if (status & E1000_STATUS_SPEED_1000)
+				ecmd->speed = 1000;
+			else if (status & E1000_STATUS_SPEED_100)
+				ecmd->speed = 100;
+			else
+				ecmd->speed = 10;
+
+			if (status & E1000_STATUS_FD)
+				ecmd->duplex = DUPLEX_FULL;
+			else
+				ecmd->duplex = DUPLEX_HALF;
+		}
 	}
 
 	ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
@@ -179,7 +185,7 @@ static int e1000_get_settings(struct net_device *netdev,
 
 	/* MDI-X => 2; MDI =>1; Invalid =>0 */
 	if ((hw->phy.media_type == e1000_media_type_copper) &&
-	    !hw->mac.get_link_status)
+	    netif_carrier_ok(netdev))
 		ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
 		                                      ETH_TP_MDI;
 	else
@@ -191,19 +197,15 @@ static int e1000_get_settings(struct net_device *netdev,
 static u32 e1000_get_link(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_mac_info *mac = &adapter->hw.mac;
+	struct e1000_hw *hw = &adapter->hw;
 
 	/*
-	 * If the link is not reported up to netdev, interrupts are disabled,
-	 * and so the physical link state may have changed since we last
-	 * looked. Set get_link_status to make sure that the true link
-	 * state is interrogated, rather than pulling a cached and possibly
-	 * stale link state from the driver.
+	 * Avoid touching hardware registers when possible, otherwise
+	 * link negotiation can get messed up when user-level scripts
+	 * are rapidly polling the driver to see if link is up.
 	 */
-	if (!netif_carrier_ok(netdev))
-		mac->get_link_status = 1;
-
-	return e1000e_has_link(adapter);
+	return netif_running(netdev) ? netif_carrier_ok(netdev) :
+	    !!(er32(STATUS) & E1000_STATUS_LU);
 }
 
 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
@@ -880,6 +882,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
 	switch (mac->type) {
 	case e1000_ich10lan:
 	case e1000_pchlan:
+	case e1000_pch2lan:
 		mask |= (1 << 18);
 		break;
 	default:
@@ -1263,33 +1266,36 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 
 	hw->mac.autoneg = 0;
 
-	/* Workaround: K1 must be disabled for stable 1Gbps operation */
-	if (hw->mac.type == e1000_pchlan)
-		e1000_configure_k1_ich8lan(hw, false);
-
-	if (hw->phy.type == e1000_phy_m88) {
-		/* Auto-MDI/MDIX Off */
-		e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
-		/* reset to update Auto-MDI/MDIX */
-		e1e_wphy(hw, PHY_CONTROL, 0x9140);
-		/* autoneg off */
-		e1e_wphy(hw, PHY_CONTROL, 0x8140);
-	} else if (hw->phy.type == e1000_phy_gg82563)
-		e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
-
-	ctrl_reg = er32(CTRL);
-
-	switch (hw->phy.type) {
-	case e1000_phy_ife:
+	if (hw->phy.type == e1000_phy_ife) {
 		/* force 100, set loopback */
 		e1e_wphy(hw, PHY_CONTROL, 0x6100);
 
 		/* Now set up the MAC to the same speed/duplex as the PHY. */
+		ctrl_reg = er32(CTRL);
 		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
 		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
 			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
 			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */
 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+
+		ew32(CTRL, ctrl_reg);
+		udelay(500);
+
+		return 0;
+	}
+
+	/* Specific PHY configuration for loopback */
+	switch (hw->phy.type) {
+	case e1000_phy_m88:
+		/* Auto-MDI/MDIX Off */
+		e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+		/* reset to update Auto-MDI/MDIX */
+		e1e_wphy(hw, PHY_CONTROL, 0x9140);
+		/* autoneg off */
+		e1e_wphy(hw, PHY_CONTROL, 0x8140);
+		break;
+	case e1000_phy_gg82563:
+		e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
 		break;
 	case e1000_phy_bm:
 		/* Set Default MAC Interface speed to 1GB */
@@ -1312,23 +1318,41 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 		/* Set Early Link Enable */
 		e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
 		e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400);
-		/* fall through */
+		break;
+	case e1000_phy_82577:
+	case e1000_phy_82578:
+		/* Workaround: K1 must be disabled for stable 1Gbps operation */
+		e1000_configure_k1_ich8lan(hw, false);
+		break;
+	case e1000_phy_82579:
+		/* Disable PHY energy detect power down */
+		e1e_rphy(hw, PHY_REG(0, 21), &phy_reg);
+		e1e_wphy(hw, PHY_REG(0, 21), phy_reg & ~(1 << 3));
+		/* Disable full chip energy detect */
+		e1e_rphy(hw, PHY_REG(776, 18), &phy_reg);
+		e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1);
+		/* Enable loopback on the PHY */
+#define I82577_PHY_LBK_CTRL          19
+		e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001);
+		break;
 	default:
-		/* force 1000, set loopback */
-		e1e_wphy(hw, PHY_CONTROL, 0x4140);
-		mdelay(250);
+		break;
+	}
 
-		/* Now set up the MAC to the same speed/duplex as the PHY. */
-		ctrl_reg = er32(CTRL);
-		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
-		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
-			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
-			     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
-			     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+	/* force 1000, set loopback */
+	e1e_wphy(hw, PHY_CONTROL, 0x4140);
+	mdelay(250);
 
-		if (adapter->flags & FLAG_IS_ICH)
-			ctrl_reg |= E1000_CTRL_SLU;	/* Set Link Up */
-	}
+	/* Now set up the MAC to the same speed/duplex as the PHY. */
+	ctrl_reg = er32(CTRL);
+	ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+	ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+		     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+		     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+		     E1000_CTRL_FD);	 /* Force Duplex to FULL */
+
+	if (adapter->flags & FLAG_IS_ICH)
+		ctrl_reg |= E1000_CTRL_SLU;	/* Set Link Up */
 
 	if (hw->phy.media_type == e1000_media_type_copper &&
 	    hw->phy.type == e1000_phy_m88) {
@@ -1868,6 +1892,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 
 	if ((hw->phy.type == e1000_phy_ife) ||
 	    (hw->mac.type == e1000_pchlan) ||
+	    (hw->mac.type == e1000_pch2lan) ||
 	    (hw->mac.type == e1000_82583) ||
 	    (hw->mac.type == e1000_82574)) {
 		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
@@ -2026,7 +2051,6 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_coalesce		= e1000_get_coalesce,
 	.set_coalesce		= e1000_set_coalesce,
 	.get_flags		= ethtool_op_get_flags,
-	.set_flags		= ethtool_op_set_flags,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 5d1220d188d4..66ed08f726fb 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -217,7 +217,10 @@ enum e1e_registers {
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
 	E1000_SWSM2     = 0x05B58, /* Driver-only SW semaphore */
-	E1000_CRC_OFFSET = 0x05F50, /* CRC Offset register */
+	E1000_FFLT_DBG  = 0x05F04, /* Debug Register */
+	E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */
+#define E1000_PCH_RAICC(_n)	(E1000_PCH_RAICC_BASE + ((_n) * 4))
+#define E1000_CRC_OFFSET	E1000_PCH_RAICC_BASE
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
@@ -303,13 +306,14 @@ enum e1e_registers {
 #define E1000_KMRNCTRLSTA_OFFSET	0x001F0000
 #define E1000_KMRNCTRLSTA_OFFSET_SHIFT	16
 #define E1000_KMRNCTRLSTA_REN		0x00200000
+#define E1000_KMRNCTRLSTA_CTRL_OFFSET	0x1    /* Kumeran Control */
 #define E1000_KMRNCTRLSTA_DIAG_OFFSET	0x3    /* Kumeran Diagnostic */
 #define E1000_KMRNCTRLSTA_TIMEOUTS	0x4    /* Kumeran Timeouts */
 #define E1000_KMRNCTRLSTA_INBAND_PARAM	0x9    /* Kumeran InBand Parameters */
 #define E1000_KMRNCTRLSTA_DIAG_NELPBK	0x1000 /* Nearend Loopback mode */
 #define E1000_KMRNCTRLSTA_K1_CONFIG	0x7
-#define E1000_KMRNCTRLSTA_K1_ENABLE	0x140E
-#define E1000_KMRNCTRLSTA_K1_DISABLE	0x1400
+#define E1000_KMRNCTRLSTA_K1_ENABLE	0x0002
+#define E1000_KMRNCTRLSTA_HD_CTRL	0x10   /* Kumeran HD Control */
 
 #define IFE_PHY_EXTENDED_STATUS_CONTROL	0x10
 #define IFE_PHY_SPECIAL_CONTROL		0x11 /* 100BaseTx PHY Special Control */
@@ -387,6 +391,8 @@ enum e1e_registers {
 #define E1000_DEV_ID_PCH_M_HV_LC		0x10EB
 #define E1000_DEV_ID_PCH_D_HV_DM		0x10EF
 #define E1000_DEV_ID_PCH_D_HV_DC		0x10F0
+#define E1000_DEV_ID_PCH2_LV_LM			0x1502
+#define E1000_DEV_ID_PCH2_LV_V			0x1503
 
 #define E1000_REVISION_4 4
 
@@ -406,6 +412,7 @@ enum e1000_mac_type {
 	e1000_ich9lan,
 	e1000_ich10lan,
 	e1000_pchlan,
+	e1000_pch2lan,
 };
 
 enum e1000_media_type {
@@ -442,6 +449,7 @@ enum e1000_phy_type {
 	e1000_phy_bm,
 	e1000_phy_82578,
 	e1000_phy_82577,
+	e1000_phy_82579,
 };
 
 enum e1000_bus_width {
@@ -929,6 +937,7 @@ struct e1000_dev_spec_ich8lan {
 	bool kmrn_lock_loss_workaround_enabled;
 	struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
 	bool nvm_k1_enabled;
+	bool eee_disable;
 };
 
 struct e1000_hw {
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index b2507d93de99..63930d12711c 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -52,6 +52,8 @@
  * 82577LC Gigabit Network Connection
  * 82578DM Gigabit Network Connection
  * 82578DC Gigabit Network Connection
+ * 82579LM Gigabit Network Connection
+ * 82579V Gigabit Network Connection
  */
 
 #include "e1000.h"
@@ -126,6 +128,13 @@
 #define HV_SMB_ADDR_PEC_EN     0x0200
 #define HV_SMB_ADDR_VALID      0x0080
 
+/* PHY Power Management Control */
+#define HV_PM_CTRL		PHY_REG(770, 17)
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL			PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK	0x6000
+
 /* Strapping Option Register - RO */
 #define E1000_STRAP                     0x0000C
 #define E1000_STRAP_SMBUS_ADDRESS_MASK  0x00FE0000
@@ -226,6 +235,8 @@ static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
 static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
 static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
 static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -277,13 +288,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
+	/*
+	 * The MAC-PHY interconnect may still be in SMBus mode
+	 * after Sx->S0.  If the manageability engine (ME) is
+	 * disabled, then toggle the LANPHYPC Value bit to force
+	 * the interconnect to PCIe mode.
+	 */
 	if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
-		/*
-		 * The MAC-PHY interconnect may still be in SMBus mode
-		 * after Sx->S0.  Toggle the LANPHYPC Value bit to force
-		 * the interconnect to PCIe mode, but only if there is no
-		 * firmware present otherwise firmware will have done it.
-		 */
 		ctrl = er32(CTRL);
 		ctrl |=  E1000_CTRL_LANPHYPC_OVERRIDE;
 		ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
@@ -324,6 +335,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 
 	switch (phy->type) {
 	case e1000_phy_82577:
+	case e1000_phy_82579:
 		phy->ops.check_polarity = e1000_check_polarity_82577;
 		phy->ops.force_speed_duplex =
 			e1000_phy_force_speed_duplex_82577;
@@ -515,6 +527,8 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	case e1000_ich8lan:
 	case e1000_ich9lan:
 	case e1000_ich10lan:
+		/* check management mode */
+		mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
 		/* ID LED init */
 		mac->ops.id_led_init = e1000e_id_led_init;
 		/* setup LED */
@@ -526,6 +540,9 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 		mac->ops.led_off = e1000_led_off_ich8lan;
 		break;
 	case e1000_pchlan:
+	case e1000_pch2lan:
+		/* check management mode */
+		mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
 		/* ID LED init */
 		mac->ops.id_led_init = e1000_id_led_init_pchlan;
 		/* setup LED */
@@ -544,10 +561,47 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
 	if (mac->type == e1000_ich8lan)
 		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
 
+	/* Disable PHY configuration by hardware, config by software */
+	if (mac->type == e1000_pch2lan) {
+		u32 extcnf_ctrl = er32(EXTCNF_CTRL);
+
+		extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+	}
+
 	return 0;
 }
 
 /**
+ *  e1000_set_eee_pchlan - Enable/disable EEE support
+ *  @hw: pointer to the HW structure
+ *
+ *  Enable/disable EEE based on setting in dev_spec structure.  The bits in
+ *  the LPI Control register will remain set only if/when link is up.
+ **/
+static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	u16 phy_reg;
+
+	if (hw->phy.type != e1000_phy_82579)
+		goto out;
+
+	ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+	if (ret_val)
+		goto out;
+
+	if (hw->dev_spec.ich8lan.eee_disable)
+		phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
+	else
+		phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
+
+	ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
+out:
+	return ret_val;
+}
+
+/**
  *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
  *  @hw: pointer to the HW structure
  *
@@ -604,6 +658,11 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	 */
 	e1000e_check_downshift(hw);
 
+	/* Enable/Disable EEE after link up */
+	ret_val = e1000_set_eee_pchlan(hw);
+	if (ret_val)
+		goto out;
+
 	/*
 	 * If we are forcing speed/duplex, then we simply return since
 	 * we have already determined whether we have link or not.
@@ -647,10 +706,19 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	if (rc)
 		return rc;
 
-	if (hw->mac.type == e1000_pchlan)
-		rc = e1000_init_phy_params_pchlan(hw);
-	else
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+	case e1000_ich9lan:
+	case e1000_ich10lan:
 		rc = e1000_init_phy_params_ich8lan(hw);
+		break;
+	case e1000_pchlan:
+	case e1000_pch2lan:
+		rc = e1000_init_phy_params_pchlan(hw);
+		break;
+	default:
+		break;
+	}
 	if (rc)
 		return rc;
 
@@ -663,6 +731,10 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 	    (adapter->hw.phy.type == e1000_phy_igp_3))
 		adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
 
+	/* Disable EEE by default until IEEE802.3az spec is finalized */
+	if (adapter->flags2 & FLAG2_HAS_EEE)
+		adapter->hw.dev_spec.ich8lan.eee_disable = true;
+
 	return 0;
 }
 
@@ -774,7 +846,7 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
  *  e1000_check_mng_mode_ich8lan - Checks management mode
  *  @hw: pointer to the HW structure
  *
- *  This checks if the adapter has manageability enabled.
+ *  This checks if the adapter has any manageability enabled.
  *  This is a function pointer entry point only called by read/write
  *  routines for the PHY and NVM parts.
  **/
@@ -783,9 +855,26 @@ static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
 	u32 fwsm;
 
 	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+	       ((fwsm & E1000_FWSM_MODE_MASK) ==
+		(E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ *  e1000_check_mng_mode_pchlan - Checks management mode
+ *  @hw: pointer to the HW structure
+ *
+ *  This checks if the adapter has iAMT enabled.
+ *  This is a function pointer entry point only called by read/write
+ *  routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
+{
+	u32 fwsm;
 
-	return (fwsm & E1000_FWSM_MODE_MASK) ==
-		(E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
+	fwsm = er32(FWSM);
+	return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+	       (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
 }
 
 /**
@@ -820,14 +909,6 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	s32 ret_val = 0;
 	u16 word_addr, reg_data, reg_addr, phy_page = 0;
 
-	if (!(hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) &&
-		!(hw->mac.type == e1000_pchlan))
-		return ret_val;
-
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
 	/*
 	 * Initialize the PHY from the NVM on ICH platforms.  This
 	 * is needed due to an issue where the NVM configuration is
@@ -835,12 +916,27 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	 * Therefore, after each PHY reset, we will load the
 	 * configuration data out of the NVM manually.
 	 */
-	if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
-	    (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
-	    (hw->mac.type == e1000_pchlan))
+	switch (hw->mac.type) {
+	case e1000_ich8lan:
+		if (phy->type != e1000_phy_igp_3)
+			return ret_val;
+
+		if (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) {
+			sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+			break;
+		}
+		/* Fall-thru */
+	case e1000_pchlan:
+	case e1000_pch2lan:
 		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
-	else
-		sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+		break;
+	default:
+		return ret_val;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return ret_val;
 
 	data = er32(FEXTNVM);
 	if (!(data & sw_cfg_mask))
@@ -851,8 +947,10 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	 * extended configuration before SW configuration
 	 */
 	data = er32(EXTCNF_CTRL);
-	if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
-		goto out;
+	if (!(hw->mac.type == e1000_pch2lan)) {
+		if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+			goto out;
+	}
 
 	cnf_size = er32(EXTCNF_SIZE);
 	cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
@@ -864,7 +962,8 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
 	cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
 
 	if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
-	    (hw->mac.type == e1000_pchlan)) {
+	    ((hw->mac.type == e1000_pchlan) ||
+	     (hw->mac.type == e1000_pch2lan))) {
 		/*
 		 * HW configures the SMBus address and LEDs when the
 		 * OEM and LCD Write Enable bits are set in the NVM.
@@ -1071,16 +1170,18 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 	u32 mac_reg;
 	u16 oem_reg;
 
-	if (hw->mac.type != e1000_pchlan)
+	if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan))
 		return ret_val;
 
 	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
-	mac_reg = er32(EXTCNF_CTRL);
-	if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
-		goto out;
+	if (!(hw->mac.type == e1000_pch2lan)) {
+		mac_reg = er32(EXTCNF_CTRL);
+		if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+			goto out;
+	}
 
 	mac_reg = er32(FEXTNVM);
 	if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
@@ -1221,6 +1322,243 @@ out:
 }
 
 /**
+ *  e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
+ *  @hw:   pointer to the HW structure
+ **/
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
+{
+	u32 mac_reg;
+	u16 i;
+
+	/* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
+	for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+		mac_reg = er32(RAL(i));
+		e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
+		mac_reg = er32(RAH(i));
+		e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
+		e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0x8000));
+	}
+}
+
+static u32 e1000_calc_rx_da_crc(u8 mac[])
+{
+	u32 poly = 0xEDB88320;	/* Polynomial for 802.3 CRC calculation */
+	u32 i, j, mask, crc;
+
+	crc = 0xffffffff;
+	for (i = 0; i < 6; i++) {
+		crc = crc ^ mac[i];
+		for (j = 8; j > 0; j--) {
+			mask = (crc & 1) * (-1);
+			crc = (crc >> 1) ^ (poly & mask);
+		}
+	}
+	return ~crc;
+}
+
+/**
+ *  e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
+ *  with 82579 PHY
+ *  @hw: pointer to the HW structure
+ *  @enable: flag to enable/disable workaround when enabling/disabling jumbos
+ **/
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
+{
+	s32 ret_val = 0;
+	u16 phy_reg, data;
+	u32 mac_reg;
+	u16 i;
+
+	if (hw->mac.type != e1000_pch2lan)
+		goto out;
+
+	/* disable Rx path while enabling/disabling workaround */
+	e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+	ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
+	if (ret_val)
+		goto out;
+
+	if (enable) {
+		/*
+		 * Write Rx addresses (rar_entry_count for RAL/H, +4 for
+		 * SHRAL/H) and initial CRC values to the MAC
+		 */
+		for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+			u8 mac_addr[ETH_ALEN] = {0};
+			u32 addr_high, addr_low;
+
+			addr_high = er32(RAH(i));
+			if (!(addr_high & E1000_RAH_AV))
+				continue;
+			addr_low = er32(RAL(i));
+			mac_addr[0] = (addr_low & 0xFF);
+			mac_addr[1] = ((addr_low >> 8) & 0xFF);
+			mac_addr[2] = ((addr_low >> 16) & 0xFF);
+			mac_addr[3] = ((addr_low >> 24) & 0xFF);
+			mac_addr[4] = (addr_high & 0xFF);
+			mac_addr[5] = ((addr_high >> 8) & 0xFF);
+
+			ew32(PCH_RAICC(i),
+					e1000_calc_rx_da_crc(mac_addr));
+		}
+
+		/* Write Rx addresses to the PHY */
+		e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+
+		/* Enable jumbo frame workaround in the MAC */
+		mac_reg = er32(FFLT_DBG);
+		mac_reg &= ~(1 << 14);
+		mac_reg |= (7 << 15);
+		ew32(FFLT_DBG, mac_reg);
+
+		mac_reg = er32(RCTL);
+		mac_reg |= E1000_RCTL_SECRC;
+		ew32(RCTL, mac_reg);
+
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						&data);
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						data | (1 << 0));
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						&data);
+		if (ret_val)
+			goto out;
+		data &= ~(0xF << 8);
+		data |= (0xB << 8);
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						data);
+		if (ret_val)
+			goto out;
+
+		/* Enable jumbo frame workaround in the PHY */
+		e1e_rphy(hw, PHY_REG(769, 20), &data);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(769, 23), &data);
+		data &= ~(0x7F << 5);
+		data |= (0x37 << 5);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(769, 16), &data);
+		data &= ~(1 << 13);
+		data |= (1 << 12);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(776, 20), &data);
+		data &= ~(0x3FF << 2);
+		data |= (0x1A << 2);
+		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+		if (ret_val)
+			goto out;
+		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xFE00);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, HV_PM_CTRL, &data);
+		ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
+		if (ret_val)
+			goto out;
+	} else {
+		/* Write MAC register values back to h/w defaults */
+		mac_reg = er32(FFLT_DBG);
+		mac_reg &= ~(0xF << 14);
+		ew32(FFLT_DBG, mac_reg);
+
+		mac_reg = er32(RCTL);
+		mac_reg &= ~E1000_RCTL_SECRC;
+		ew32(FFLT_DBG, mac_reg);
+
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						&data);
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_CTRL_OFFSET,
+						data & ~(1 << 0));
+		if (ret_val)
+			goto out;
+		ret_val = e1000e_read_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						&data);
+		if (ret_val)
+			goto out;
+		data &= ~(0xF << 8);
+		data |= (0xB << 8);
+		ret_val = e1000e_write_kmrn_reg(hw,
+						E1000_KMRNCTRLSTA_HD_CTRL,
+						data);
+		if (ret_val)
+			goto out;
+
+		/* Write PHY register values back to h/w defaults */
+		e1e_rphy(hw, PHY_REG(769, 20), &data);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14));
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(769, 23), &data);
+		data &= ~(0x7F << 5);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(769, 16), &data);
+		data &= ~(1 << 12);
+		data |= (1 << 13);
+		ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, PHY_REG(776, 20), &data);
+		data &= ~(0x3FF << 2);
+		data |= (0x8 << 2);
+		ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+		if (ret_val)
+			goto out;
+		ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
+		if (ret_val)
+			goto out;
+		e1e_rphy(hw, HV_PM_CTRL, &data);
+		ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
+		if (ret_val)
+			goto out;
+	}
+
+	/* re-enable Rx path after enabling/disabling workaround */
+	ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ *  done after every PHY reset.
+ **/
+static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+
+	if (hw->mac.type != e1000_pch2lan)
+		goto out;
+
+	/* Set MDIO slow mode before any other MDIO access */
+	ret_val = e1000_set_mdio_slow_mode_hv(hw);
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000_lan_init_done_ich8lan - Check for PHY config completion
  *  @hw: pointer to the HW structure
  *
@@ -1271,12 +1609,17 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
 		if (ret_val)
 			goto out;
 		break;
+	case e1000_pch2lan:
+		ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
+		if (ret_val)
+			goto out;
+		break;
 	default:
 		break;
 	}
 
 	/* Dummy read to clear the phy wakeup bit after lcd reset */
-	if (hw->mac.type == e1000_pchlan)
+	if (hw->mac.type >= e1000_pchlan)
 		e1e_rphy(hw, BM_WUC, &reg);
 
 	/* Configure the LCD with the extended configuration region in NVM */
@@ -2800,6 +3143,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 
 	ew32(FCTTV, hw->fc.pause_time);
 	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82579) ||
 	    (hw->phy.type == e1000_phy_82577)) {
 		ew32(FCRTV_PCH, hw->fc.refresh_time);
 
@@ -2863,6 +3207,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 		break;
 	case e1000_phy_82577:
+	case e1000_phy_82579:
 		ret_val = e1000_copper_link_setup_82577(hw);
 		if (ret_val)
 			return ret_val;
@@ -3116,21 +3461,12 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
 {
 	u32 phy_ctrl;
 
-	switch (hw->mac.type) {
-	case e1000_ich8lan:
-	case e1000_ich9lan:
-	case e1000_ich10lan:
-	case e1000_pchlan:
-		phy_ctrl = er32(PHY_CTRL);
-		phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU |
-		            E1000_PHY_CTRL_GBE_DISABLE;
-		ew32(PHY_CTRL, phy_ctrl);
+	phy_ctrl = er32(PHY_CTRL);
+	phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE;
+	ew32(PHY_CTRL, phy_ctrl);
 
-		if (hw->mac.type == e1000_pchlan)
-			e1000_phy_hw_reset_ich8lan(hw);
-	default:
-		break;
-	}
+	if (hw->mac.type >= e1000_pchlan)
+		e1000_phy_hw_reset_ich8lan(hw);
 }
 
 /**
@@ -3370,6 +3706,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 
 	/* Clear PHY statistics registers */
 	if ((hw->phy.type == e1000_phy_82578) ||
+	    (hw->phy.type == e1000_phy_82579) ||
 	    (hw->phy.type == e1000_phy_82577)) {
 		hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
 		hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
@@ -3390,7 +3727,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 
 static struct e1000_mac_operations ich8_mac_ops = {
 	.id_led_init		= e1000e_id_led_init,
-	.check_mng_mode		= e1000_check_mng_mode_ich8lan,
+	/* check_mng_mode dependent on mac type */
 	.check_for_link		= e1000_check_for_copper_link_ich8lan,
 	/* cleanup_led dependent on mac type */
 	.clear_hw_cntrs		= e1000_clear_hw_cntrs_ich8lan,
@@ -3497,6 +3834,7 @@ struct e1000_info e1000_pch_info = {
 				  | FLAG_HAS_JUMBO_FRAMES
 				  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
 				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS,
 	.pba			= 26,
 	.max_hw_frame_size	= 4096,
 	.get_variants		= e1000_get_variants_ich8lan,
@@ -3504,3 +3842,23 @@ struct e1000_info e1000_pch_info = {
 	.phy_ops		= &ich8_phy_ops,
 	.nvm_ops		= &ich8_nvm_ops,
 };
+
+struct e1000_info e1000_pch2_info = {
+	.mac			= e1000_pch2lan,
+	.flags			= FLAG_IS_ICH
+				  | FLAG_HAS_WOL
+				  | FLAG_RX_CSUM_ENABLED
+				  | FLAG_HAS_CTRLEXT_ON_LOAD
+				  | FLAG_HAS_AMT
+				  | FLAG_HAS_FLASH
+				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_APME_IN_WUC,
+	.flags2			= FLAG2_HAS_PHY_STATS
+				  | FLAG2_HAS_EEE,
+	.pba			= 18,
+	.max_hw_frame_size	= DEFAULT_JUMBO,
+	.get_variants		= e1000_get_variants_ich8lan,
+	.mac_ops		= &ich8_mac_ops,
+	.phy_ops		= &ich8_phy_ops,
+	.nvm_ops		= &ich8_nvm_ops,
+};
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index a968e3a416ac..df4a27922931 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 9f13b660b801..36d31a416320 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -52,7 +52,9 @@
 
 #include "e1000.h"
 
-#define DRV_VERSION "1.0.2-k4"
+#define DRV_EXTRAVERSION "-k2"
+
+#define DRV_VERSION "1.2.7" DRV_EXTRAVERSION
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -67,6 +69,7 @@ static const struct e1000_info *e1000_info_tbl[] = {
 	[board_ich9lan]		= &e1000_ich9_info,
 	[board_ich10lan]	= &e1000_ich10_info,
 	[board_pchlan]		= &e1000_pch_info,
+	[board_pch2lan]		= &e1000_pch2_info,
 };
 
 struct e1000_reg_info {
@@ -221,10 +224,10 @@ static void e1000e_dump(struct e1000_adapter *adapter)
 	buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
 	printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
 		0, tx_ring->next_to_use, tx_ring->next_to_clean,
-		(u64)buffer_info->dma,
+		(unsigned long long)buffer_info->dma,
 		buffer_info->length,
 		buffer_info->next_to_watch,
-		(u64)buffer_info->time_stamp);
+		(unsigned long long)buffer_info->time_stamp);
 
 	/* Print TX Rings */
 	if (!netif_msg_tx_done(adapter))
@@ -276,9 +279,11 @@ static void e1000e_dump(struct e1000_adapter *adapter)
 			"%04X  %3X %016llX %p",
 		       (!(le64_to_cpu(u0->b) & (1<<29)) ? 'l' :
 			((le64_to_cpu(u0->b) & (1<<20)) ? 'd' : 'c')), i,
-		       le64_to_cpu(u0->a), le64_to_cpu(u0->b),
-		       (u64)buffer_info->dma, buffer_info->length,
-		       buffer_info->next_to_watch, (u64)buffer_info->time_stamp,
+		       (unsigned long long)le64_to_cpu(u0->a),
+		       (unsigned long long)le64_to_cpu(u0->b),
+		       (unsigned long long)buffer_info->dma,
+		       buffer_info->length, buffer_info->next_to_watch,
+		       (unsigned long long)buffer_info->time_stamp,
 		       buffer_info->skb);
 		if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
 			printk(KERN_CONT " NTC/U\n");
@@ -353,19 +358,19 @@ rx_ring_summary:
 				printk(KERN_INFO "RWB[0x%03X]     %016llX "
 					"%016llX %016llX %016llX "
 					"---------------- %p", i,
-					le64_to_cpu(u1->a),
-					le64_to_cpu(u1->b),
-					le64_to_cpu(u1->c),
-					le64_to_cpu(u1->d),
+					(unsigned long long)le64_to_cpu(u1->a),
+					(unsigned long long)le64_to_cpu(u1->b),
+					(unsigned long long)le64_to_cpu(u1->c),
+					(unsigned long long)le64_to_cpu(u1->d),
 					buffer_info->skb);
 			} else {
 				printk(KERN_INFO "R  [0x%03X]     %016llX "
 					"%016llX %016llX %016llX %016llX %p", i,
-					le64_to_cpu(u1->a),
-					le64_to_cpu(u1->b),
-					le64_to_cpu(u1->c),
-					le64_to_cpu(u1->d),
-					(u64)buffer_info->dma,
+					(unsigned long long)le64_to_cpu(u1->a),
+					(unsigned long long)le64_to_cpu(u1->b),
+					(unsigned long long)le64_to_cpu(u1->c),
+					(unsigned long long)le64_to_cpu(u1->d),
+					(unsigned long long)buffer_info->dma,
 					buffer_info->skb);
 
 				if (netif_msg_pktdata(adapter))
@@ -402,9 +407,11 @@ rx_ring_summary:
 			buffer_info = &rx_ring->buffer_info[i];
 			u0 = (struct my_u0 *)rx_desc;
 			printk(KERN_INFO "Rl[0x%03X]    %016llX %016llX "
-				"%016llX %p",
-				i, le64_to_cpu(u0->a), le64_to_cpu(u0->b),
-				(u64)buffer_info->dma, buffer_info->skb);
+				"%016llX %p", i,
+				(unsigned long long)le64_to_cpu(u0->a),
+				(unsigned long long)le64_to_cpu(u0->b),
+				(unsigned long long)buffer_info->dma,
+				buffer_info->skb);
 			if (i == rx_ring->next_to_use)
 				printk(KERN_CONT " NTU\n");
 			else if (i == rx_ring->next_to_clean)
@@ -1778,25 +1785,25 @@ void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
 void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
 {
 	int err;
-	int numvecs, i;
-
+	int i;
 
 	switch (adapter->int_mode) {
 	case E1000E_INT_MODE_MSIX:
 		if (adapter->flags & FLAG_HAS_MSIX) {
-			numvecs = 3; /* RxQ0, TxQ0 and other */
-			adapter->msix_entries = kcalloc(numvecs,
+			adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
+			adapter->msix_entries = kcalloc(adapter->num_vectors,
 						      sizeof(struct msix_entry),
 						      GFP_KERNEL);
 			if (adapter->msix_entries) {
-				for (i = 0; i < numvecs; i++)
+				for (i = 0; i < adapter->num_vectors; i++)
 					adapter->msix_entries[i].entry = i;
 
 				err = pci_enable_msix(adapter->pdev,
 						      adapter->msix_entries,
-						      numvecs);
-				if (err == 0)
+						      adapter->num_vectors);
+				if (err == 0) {
 					return;
+				}
 			}
 			/* MSI-X failed, so fall through and try MSI */
 			e_err("Failed to initialize MSI-X interrupts.  "
@@ -1818,6 +1825,9 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
 		/* Don't do anything; this is the system default */
 		break;
 	}
+
+	/* store the number of vectors being used */
+	adapter->num_vectors = 1;
 }
 
 /**
@@ -1939,7 +1949,14 @@ static void e1000_irq_disable(struct e1000_adapter *adapter)
 	if (adapter->msix_entries)
 		ew32(EIAC_82574, 0);
 	e1e_flush();
-	synchronize_irq(adapter->pdev->irq);
+
+	if (adapter->msix_entries) {
+		int i;
+		for (i = 0; i < adapter->num_vectors; i++)
+			synchronize_irq(adapter->msix_entries[i].vector);
+	} else {
+		synchronize_irq(adapter->pdev->irq);
+	}
 }
 
 /**
@@ -2723,6 +2740,16 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 		e1e_wphy(hw, 22, phy_data);
 	}
 
+	/* Workaround Si errata on 82579 - configure jumbo frame flow */
+	if (hw->mac.type == e1000_pch2lan) {
+		s32 ret_val;
+
+		if (rctl & E1000_RCTL_LPE)
+			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
+		else
+			ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+	}
+
 	/* Setup buffer sizes */
 	rctl &= ~E1000_RCTL_SZ_4096;
 	rctl |= E1000_RCTL_BSEX;
@@ -2759,7 +2786,7 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
 	 * per packet.
 	 */
 	pages = PAGE_USE_COUNT(adapter->netdev->mtu);
-	if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) &&
+	if (!(adapter->flags & FLAG_HAS_ERT) && (pages <= 3) &&
 	    (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
 		adapter->rx_ps_pages = pages;
 	else
@@ -3118,7 +3145,27 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	 *   with ERT support assuming ERT set to E1000_ERT_2048), or
 	 * - the full Rx FIFO size minus one full frame
 	 */
-	if (hw->mac.type == e1000_pchlan) {
+	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
+		fc->pause_time = 0xFFFF;
+	else
+		fc->pause_time = E1000_FC_PAUSE_TIME;
+	fc->send_xon = 1;
+	fc->current_mode = fc->requested_mode;
+
+	switch (hw->mac.type) {
+	default:
+		if ((adapter->flags & FLAG_HAS_ERT) &&
+		    (adapter->netdev->mtu > ETH_DATA_LEN))
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - (E1000_ERT_2048 << 3)));
+		else
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - adapter->max_frame_size));
+
+		fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+		fc->low_water = fc->high_water - 8;
+		break;
+	case e1000_pchlan:
 		/*
 		 * Workaround PCH LOM adapter hangs with certain network
 		 * loads.  If hangs persist, try disabling Tx flow control.
@@ -3131,26 +3178,15 @@ void e1000e_reset(struct e1000_adapter *adapter)
 			fc->low_water  = 0x3000;
 		}
 		fc->refresh_time = 0x1000;
-	} else {
-		if ((adapter->flags & FLAG_HAS_ERT) &&
-		    (adapter->netdev->mtu > ETH_DATA_LEN))
-			hwm = min(((pba << 10) * 9 / 10),
-				  ((pba << 10) - (E1000_ERT_2048 << 3)));
-		else
-			hwm = min(((pba << 10) * 9 / 10),
-				  ((pba << 10) - adapter->max_frame_size));
-
-		fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
-		fc->low_water = fc->high_water - 8;
+		break;
+	case e1000_pch2lan:
+		fc->high_water = 0x05C20;
+		fc->low_water = 0x05048;
+		fc->pause_time = 0x0650;
+		fc->refresh_time = 0x0400;
+		break;
 	}
 
-	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
-		fc->pause_time = 0xFFFF;
-	else
-		fc->pause_time = E1000_FC_PAUSE_TIME;
-	fc->send_xon = 1;
-	fc->current_mode = fc->requested_mode;
-
 	/* Allow time for pending master requests to run */
 	mac->ops.reset_hw(hw);
 
@@ -3162,8 +3198,6 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		e1000_get_hw_control(adapter);
 
 	ew32(WUC, 0);
-	if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)
-		e1e_wphy(&adapter->hw, BM_WUC, 0);
 
 	if (mac->ops.init_hw(hw))
 		e_err("Hardware Error\n");
@@ -3194,12 +3228,6 @@ int e1000e_up(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 
-	/* DMA latency requirement to workaround early-receive/jumbo issue */
-	if (adapter->flags & FLAG_HAS_ERT)
-		pm_qos_add_request(&adapter->netdev->pm_qos_req,
-				   PM_QOS_CPU_DMA_LATENCY,
-				   PM_QOS_DEFAULT_VALUE);
-
 	/* hardware has been reset, we need to reload some things */
 	e1000_configure(adapter);
 
@@ -3263,9 +3291,6 @@ void e1000e_down(struct e1000_adapter *adapter)
 	e1000_clean_tx_ring(adapter);
 	e1000_clean_rx_ring(adapter);
 
-	if (adapter->flags & FLAG_HAS_ERT)
-		pm_qos_remove_request(&adapter->netdev->pm_qos_req);
-
 	/*
 	 * TODO: for power management, we could drop the link and
 	 * pci_disable_device here.
@@ -3416,13 +3441,18 @@ static int e1000_test_msi(struct e1000_adapter *adapter)
 
 	/* disable SERR in case the MSI write causes a master abort */
 	pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
-	pci_write_config_word(adapter->pdev, PCI_COMMAND,
-			      pci_cmd & ~PCI_COMMAND_SERR);
+	if (pci_cmd & PCI_COMMAND_SERR)
+		pci_write_config_word(adapter->pdev, PCI_COMMAND,
+				      pci_cmd & ~PCI_COMMAND_SERR);
 
 	err = e1000_test_msi_interrupt(adapter);
 
-	/* restore previous setting of command word */
-	pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+	/* re-enable SERR */
+	if (pci_cmd & PCI_COMMAND_SERR) {
+		pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+		pci_cmd |= PCI_COMMAND_SERR;
+		pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+	}
 
 	/* success ! */
 	if (!err)
@@ -3495,6 +3525,12 @@ static int e1000_open(struct net_device *netdev)
 	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
 		e1000_update_mng_vlan(adapter);
 
+	/* DMA latency requirement to workaround early-receive/jumbo issue */
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_add_request(&adapter->netdev->pm_qos_req,
+				   PM_QOS_CPU_DMA_LATENCY,
+				   PM_QOS_DEFAULT_VALUE);
+
 	/*
 	 * before we allocate an interrupt, we must be ready to handle it.
 	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
@@ -3599,6 +3635,9 @@ static int e1000_close(struct net_device *netdev)
 	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_release_hw_control(adapter);
 
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_remove_request(&adapter->netdev->pm_qos_req);
+
 	pm_runtime_put_sync(&pdev->dev);
 
 	return 0;
@@ -3669,6 +3708,110 @@ static void e1000_update_phy_info(unsigned long data)
 }
 
 /**
+ * e1000e_update_phy_stats - Update the PHY statistics counters
+ * @adapter: board private structure
+ **/
+static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	s32 ret_val;
+	u16 phy_data;
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return;
+
+	hw->phy.addr = 1;
+
+#define HV_PHY_STATS_PAGE	778
+	/*
+	 * A page set is expensive so check if already on desired page.
+	 * If not, set to the page with the PHY status registers.
+	 */
+	ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+					   &phy_data);
+	if (ret_val)
+		goto release;
+	if (phy_data != (HV_PHY_STATS_PAGE << IGP_PAGE_SHIFT)) {
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+						    IGP01E1000_PHY_PAGE_SELECT,
+						    (HV_PHY_STATS_PAGE <<
+						     IGP_PAGE_SHIFT));
+		if (ret_val)
+			goto release;
+	}
+
+	/* Read/clear the upper 16-bit registers and read/accumulate lower */
+
+	/* Single Collision Count */
+	e1000e_read_phy_reg_mdic(hw, HV_SCC_UPPER & MAX_PHY_REG_ADDRESS,
+				 &phy_data);
+	ret_val = e1000e_read_phy_reg_mdic(hw,
+					   HV_SCC_LOWER & MAX_PHY_REG_ADDRESS,
+					   &phy_data);
+	if (!ret_val)
+		adapter->stats.scc += phy_data;
+
+	/* Excessive Collision Count */
+	e1000e_read_phy_reg_mdic(hw, HV_ECOL_UPPER & MAX_PHY_REG_ADDRESS,
+				 &phy_data);
+	ret_val = e1000e_read_phy_reg_mdic(hw,
+					   HV_ECOL_LOWER & MAX_PHY_REG_ADDRESS,
+					   &phy_data);
+	if (!ret_val)
+		adapter->stats.ecol += phy_data;
+
+	/* Multiple Collision Count */
+	e1000e_read_phy_reg_mdic(hw, HV_MCC_UPPER & MAX_PHY_REG_ADDRESS,
+				 &phy_data);
+	ret_val = e1000e_read_phy_reg_mdic(hw,
+					   HV_MCC_LOWER & MAX_PHY_REG_ADDRESS,
+					   &phy_data);
+	if (!ret_val)
+		adapter->stats.mcc += phy_data;
+
+	/* Late Collision Count */
+	e1000e_read_phy_reg_mdic(hw, HV_LATECOL_UPPER & MAX_PHY_REG_ADDRESS,
+				 &phy_data);
+	ret_val = e1000e_read_phy_reg_mdic(hw,
+					   HV_LATECOL_LOWER &
+					   MAX_PHY_REG_ADDRESS,
+					   &phy_data);
+	if (!ret_val)
+		adapter->stats.latecol += phy_data;
+
+	/* Collision Count - also used for adaptive IFS */
+	e1000e_read_phy_reg_mdic(hw, HV_COLC_UPPER & MAX_PHY_REG_ADDRESS,
+				 &phy_data);
+	ret_val = e1000e_read_phy_reg_mdic(hw,
+					   HV_COLC_LOWER & MAX_PHY_REG_ADDRESS,
+					   &phy_data);
+	if (!ret_val)
+		hw->mac.collision_delta = phy_data;
+
+	/* Defer Count */
+	e1000e_read_phy_reg_mdic(hw, HV_DC_UPPER & MAX_PHY_REG_ADDRESS,
+				 &phy_data);
+	ret_val = e1000e_read_phy_reg_mdic(hw,
+					   HV_DC_LOWER & MAX_PHY_REG_ADDRESS,
+					   &phy_data);
+	if (!ret_val)
+		adapter->stats.dc += phy_data;
+
+	/* Transmit with no CRS */
+	e1000e_read_phy_reg_mdic(hw, HV_TNCRS_UPPER & MAX_PHY_REG_ADDRESS,
+				 &phy_data);
+	ret_val = e1000e_read_phy_reg_mdic(hw,
+					   HV_TNCRS_LOWER & MAX_PHY_REG_ADDRESS,
+					   &phy_data);
+	if (!ret_val)
+		adapter->stats.tncrs += phy_data;
+
+release:
+	hw->phy.ops.release(hw);
+}
+
+/**
  * e1000e_update_stats - Update the board statistics counters
  * @adapter: board private structure
  **/
@@ -3677,7 +3820,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
-	u16 phy_data;
 
 	/*
 	 * Prevent stats update while adapter is being reset, or if the pci
@@ -3697,34 +3839,27 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 	adapter->stats.roc += er32(ROC);
 
 	adapter->stats.mpc += er32(MPC);
-	if ((hw->phy.type == e1000_phy_82578) ||
-	    (hw->phy.type == e1000_phy_82577)) {
-		e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
-		if (!e1e_rphy(hw, HV_SCC_LOWER, &phy_data))
-			adapter->stats.scc += phy_data;
-
-		e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
-		if (!e1e_rphy(hw, HV_ECOL_LOWER, &phy_data))
-			adapter->stats.ecol += phy_data;
-
-		e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
-		if (!e1e_rphy(hw, HV_MCC_LOWER, &phy_data))
-			adapter->stats.mcc += phy_data;
-
-		e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
-		if (!e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data))
-			adapter->stats.latecol += phy_data;
-
-		e1e_rphy(hw, HV_DC_UPPER, &phy_data);
-		if (!e1e_rphy(hw, HV_DC_LOWER, &phy_data))
-			adapter->stats.dc += phy_data;
-	} else {
-		adapter->stats.scc += er32(SCC);
-		adapter->stats.ecol += er32(ECOL);
-		adapter->stats.mcc += er32(MCC);
-		adapter->stats.latecol += er32(LATECOL);
-		adapter->stats.dc += er32(DC);
+
+	/* Half-duplex statistics */
+	if (adapter->link_duplex == HALF_DUPLEX) {
+		if (adapter->flags2 & FLAG2_HAS_PHY_STATS) {
+			e1000e_update_phy_stats(adapter);
+		} else {
+			adapter->stats.scc += er32(SCC);
+			adapter->stats.ecol += er32(ECOL);
+			adapter->stats.mcc += er32(MCC);
+			adapter->stats.latecol += er32(LATECOL);
+			adapter->stats.dc += er32(DC);
+
+			hw->mac.collision_delta = er32(COLC);
+
+			if ((hw->mac.type != e1000_82574) &&
+			    (hw->mac.type != e1000_82583))
+				adapter->stats.tncrs += er32(TNCRS);
+		}
+		adapter->stats.colc += hw->mac.collision_delta;
 	}
+
 	adapter->stats.xonrxc += er32(XONRXC);
 	adapter->stats.xontxc += er32(XONTXC);
 	adapter->stats.xoffrxc += er32(XOFFRXC);
@@ -3742,28 +3877,9 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
 
 	hw->mac.tx_packet_delta = er32(TPT);
 	adapter->stats.tpt += hw->mac.tx_packet_delta;
-	if ((hw->phy.type == e1000_phy_82578) ||
-	    (hw->phy.type == e1000_phy_82577)) {
-		e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
-		if (!e1e_rphy(hw, HV_COLC_LOWER, &phy_data))
-			hw->mac.collision_delta = phy_data;
-	} else {
-		hw->mac.collision_delta = er32(COLC);
-	}
-	adapter->stats.colc += hw->mac.collision_delta;
 
 	adapter->stats.algnerrc += er32(ALGNERRC);
 	adapter->stats.rxerrc += er32(RXERRC);
-	if ((hw->phy.type == e1000_phy_82578) ||
-	    (hw->phy.type == e1000_phy_82577)) {
-		e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
-		if (!e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data))
-			adapter->stats.tncrs += phy_data;
-	} else {
-		if ((hw->mac.type != e1000_82574) &&
-		    (hw->mac.type != e1000_82583))
-			adapter->stats.tncrs += er32(TNCRS);
-	}
 	adapter->stats.cexterr += er32(CEXTERR);
 	adapter->stats.tsctc += er32(TSCTC);
 	adapter->stats.tsctfc += er32(TSCTFC);
@@ -3862,7 +3978,7 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
 	       ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
 }
 
-bool e1000e_has_link(struct e1000_adapter *adapter)
+static bool e1000e_has_link(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	bool link_active = 0;
@@ -4838,14 +4954,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
 	int retval = 0;
 
 	/* copy MAC RARs to PHY RARs */
-	for (i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
-		mac_reg = er32(RAL(i));
-		e1e_wphy(hw, BM_RAR_L(i), (u16)(mac_reg & 0xFFFF));
-		e1e_wphy(hw, BM_RAR_M(i), (u16)((mac_reg >> 16) & 0xFFFF));
-		mac_reg = er32(RAH(i));
-		e1e_wphy(hw, BM_RAR_H(i), (u16)(mac_reg & 0xFFFF));
-		e1e_wphy(hw, BM_RAR_CTRL(i), (u16)((mac_reg >> 16) & 0xFFFF));
-	}
+	e1000_copy_rx_addrs_to_phy_ich8lan(hw);
 
 	/* copy MAC MTA to PHY MTA */
 	for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
@@ -5548,8 +5657,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_sw_init;
 
-	err = -EIO;
-
 	memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
 	memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
 	memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
@@ -5896,6 +6003,9 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
 
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
+
 	{ }	/* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
@@ -5932,7 +6042,7 @@ static int __init e1000_init_module(void)
 	int ret;
 	pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
 		e1000e_driver_version);
-	pr_info("Copyright (c) 1999 - 2009 Intel Corporation.\n");
+	pr_info("Copyright (c) 1999 - 2010 Intel Corporation.\n");
 	ret = pci_register_driver(&e1000_driver);
 
 	return ret;
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index a150e48a117f..34aeec13bb16 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index b4ac82d51b20..3d3dc0c82355 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -2319,6 +2319,9 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
 	case I82577_E_PHY_ID:
 		phy_type = e1000_phy_82577;
 		break;
+	case I82579_E_PHY_ID:
+		phy_type = e1000_phy_82579;
+		break;
 	default:
 		phy_type = e1000_phy_unknown;
 		break;