summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
authorBoris Brezillon <boris.brezillon@bootlin.com>2018-08-11 12:19:35 +0200
committerBoris Brezillon <boris.brezillon@bootlin.com>2018-08-11 12:19:35 +0200
commitd0eea5d8db42a9fbf89943253908579865a3eaad (patch)
treebdc3d032b9107242508d91c513212150ce058b3e /drivers/mtd
parentda86748bf60068e0d6ad56e5c919ca7e6782c4ba (diff)
parentbb276262e88dae52cc717bb636b7468f66bb234e (diff)
downloadtalos-obmc-linux-d0eea5d8db42a9fbf89943253908579865a3eaad.tar.gz
talos-obmc-linux-d0eea5d8db42a9fbf89943253908579865a3eaad.zip
Merge tag 'spi-nor/for-4.19' of git://git.infradead.org/linux-mtd into mtd/next
Pull SPI NOR updates from Boris Brezillon: " Core changes: - Apply reset hacks only when reset is explicitly marked as broken in the DT Driver changes: - Minor cleanup/fixes in the m25p80 driver - Release flash_np in the nxp-spifi driver - Add suspend/resume hooks to the atmel-quadspi driver - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi driver - Use %pK instead of %p in the stm32-quadspi driver - Improve timeout handling in the cadence-quadspi driver - Use mtd_device_register() instead of mtd_device_parse_register() in the intel-spi driver "
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/devices/m25p80.c5
-rw-r--r--drivers/mtd/spi-nor/atmel-quadspi.c23
-rw-r--r--drivers/mtd/spi-nor/cadence-quadspi.c20
-rw-r--r--drivers/mtd/spi-nor/intel-spi.c2
-rw-r--r--drivers/mtd/spi-nor/nxp-spifi.c1
-rw-r--r--drivers/mtd/spi-nor/spi-nor.c18
-rw-r--r--drivers/mtd/spi-nor/stm32-quadspi.c6
7 files changed, 52 insertions, 23 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index e84563d2067f..fe260ccb2d7d 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -28,11 +28,9 @@
#include <linux/spi/flash.h>
#include <linux/mtd/spi-nor.h>
-#define MAX_CMD_SIZE 6
struct m25p {
struct spi_mem *spimem;
struct spi_nor spi_nor;
- u8 command[MAX_CMD_SIZE];
};
static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len)
@@ -70,7 +68,7 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
- SPI_MEM_OP_DUMMY(0, 1),
+ SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(len, buf, 1));
size_t remaining = len;
int ret;
@@ -78,7 +76,6 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
/* get transfer protocols. */
op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
- op.dummy.buswidth = op.addr.buswidth;
op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
index 6c5708bacad8..820048726b4f 100644
--- a/drivers/mtd/spi-nor/atmel-quadspi.c
+++ b/drivers/mtd/spi-nor/atmel-quadspi.c
@@ -34,7 +34,7 @@
#include <linux/of.h>
#include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
/* QSPI register offsets */
#define QSPI_CR 0x0000 /* Control Register */
@@ -737,6 +737,26 @@ static int atmel_qspi_remove(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused atmel_qspi_suspend(struct device *dev)
+{
+ struct atmel_qspi *aq = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(aq->clk);
+
+ return 0;
+}
+
+static int __maybe_unused atmel_qspi_resume(struct device *dev)
+{
+ struct atmel_qspi *aq = dev_get_drvdata(dev);
+
+ clk_prepare_enable(aq->clk);
+
+ return atmel_qspi_init(aq);
+}
+
+static SIMPLE_DEV_PM_OPS(atmel_qspi_pm_ops, atmel_qspi_suspend,
+ atmel_qspi_resume);
static const struct of_device_id atmel_qspi_dt_ids[] = {
{ .compatible = "atmel,sama5d2-qspi" },
@@ -749,6 +769,7 @@ static struct platform_driver atmel_qspi_driver = {
.driver = {
.name = "atmel_qspi",
.of_match_table = atmel_qspi_dt_ids,
+ .pm = &atmel_qspi_pm_ops,
},
.probe = atmel_qspi_probe,
.remove = atmel_qspi_remove,
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index c3f7aaa5d18f..7a19dae717fa 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -525,15 +525,14 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
reg_base + CQSPI_REG_INDIRECTRD);
while (remaining > 0) {
- ret = wait_for_completion_timeout(&cqspi->transfer_complete,
- msecs_to_jiffies
- (CQSPI_READ_TIMEOUT_MS));
+ if (!wait_for_completion_timeout(&cqspi->transfer_complete,
+ msecs_to_jiffies(CQSPI_READ_TIMEOUT_MS)))
+ ret = -ETIMEDOUT;
bytes_to_read = cqspi_get_rd_sram_level(cqspi);
- if (!ret && bytes_to_read == 0) {
+ if (ret && bytes_to_read == 0) {
dev_err(nor->dev, "Indirect read timeout, no bytes\n");
- ret = -ETIMEDOUT;
goto failrd;
}
@@ -649,10 +648,8 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr,
iowrite32_rep(cqspi->ahb_base, txbuf,
DIV_ROUND_UP(write_bytes, 4));
- ret = wait_for_completion_timeout(&cqspi->transfer_complete,
- msecs_to_jiffies
- (CQSPI_TIMEOUT_MS));
- if (!ret) {
+ if (!wait_for_completion_timeout(&cqspi->transfer_complete,
+ msecs_to_jiffies(CQSPI_TIMEOUT_MS))) {
dev_err(nor->dev, "Indirect write timeout\n");
ret = -ETIMEDOUT;
goto failwr;
@@ -986,9 +983,8 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf,
}
dma_async_issue_pending(cqspi->rx_chan);
- ret = wait_for_completion_timeout(&cqspi->rx_dma_complete,
- msecs_to_jiffies(len));
- if (ret <= 0) {
+ if (!wait_for_completion_timeout(&cqspi->rx_dma_complete,
+ msecs_to_jiffies(len))) {
dmaengine_terminate_sync(cqspi->rx_chan);
dev_err(nor->dev, "DMA wait_for_completion_timeout\n");
ret = -ETIMEDOUT;
diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index d2cbfc27826e..af0a22019516 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -908,7 +908,7 @@ struct intel_spi *intel_spi_probe(struct device *dev,
if (!ispi->writeable || !writeable)
ispi->nor.mtd.flags &= ~MTD_WRITEABLE;
- ret = mtd_device_parse_register(&ispi->nor.mtd, NULL, NULL, &part, 1);
+ ret = mtd_device_register(&ispi->nor.mtd, &part, 1);
if (ret)
return ERR_PTR(ret);
diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
index 15374216d4d9..0c9094ec5966 100644
--- a/drivers/mtd/spi-nor/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/nxp-spifi.c
@@ -436,6 +436,7 @@ static int nxp_spifi_probe(struct platform_device *pdev)
}
ret = nxp_spifi_setup_flash(spifi, flash_np);
+ of_node_put(flash_np);
if (ret) {
dev_err(&pdev->dev, "unable to setup flash chip\n");
goto dis_clks;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index d9c368c44194..f028277fb1ce 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2757,8 +2757,18 @@ static int spi_nor_init(struct spi_nor *nor)
if ((nor->addr_width == 4) &&
(JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) &&
- !(nor->info->flags & SPI_NOR_4B_OPCODES))
+ !(nor->info->flags & SPI_NOR_4B_OPCODES)) {
+ /*
+ * If the RESET# pin isn't hooked up properly, or the system
+ * otherwise doesn't perform a reset command in the boot
+ * sequence, it's impossible to 100% protect against unexpected
+ * reboots (e.g., crashes). Warn the user (or hopefully, system
+ * designer) that this is bad.
+ */
+ WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
+ "enabling reset hack; may not recover from unexpected reboots\n");
set_4byte(nor, nor->info, 1);
+ }
return 0;
}
@@ -2781,7 +2791,8 @@ void spi_nor_restore(struct spi_nor *nor)
/* restore the addressing mode */
if ((nor->addr_width == 4) &&
(JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) &&
- !(nor->info->flags & SPI_NOR_4B_OPCODES))
+ !(nor->info->flags & SPI_NOR_4B_OPCODES) &&
+ (nor->flags & SNOR_F_BROKEN_RESET))
set_4byte(nor, nor->info, 0);
}
EXPORT_SYMBOL_GPL(spi_nor_restore);
@@ -2911,6 +2922,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
}
+ if (of_property_read_bool(np, "broken-flash-reset"))
+ nor->flags |= SNOR_F_BROKEN_RESET;
+
/* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & SPI_NOR_NO_FR)
params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c
index 72553506a00b..13e9fc961d3b 100644
--- a/drivers/mtd/spi-nor/stm32-quadspi.c
+++ b/drivers/mtd/spi-nor/stm32-quadspi.c
@@ -355,7 +355,7 @@ static int stm32_qspi_read_reg(struct spi_nor *nor,
struct device *dev = flash->qspi->dev;
struct stm32_qspi_cmd cmd;
- dev_dbg(dev, "read_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len);
+ dev_dbg(dev, "read_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len);
memset(&cmd, 0, sizeof(cmd));
cmd.opcode = opcode;
@@ -376,7 +376,7 @@ static int stm32_qspi_write_reg(struct spi_nor *nor, u8 opcode,
struct device *dev = flash->qspi->dev;
struct stm32_qspi_cmd cmd;
- dev_dbg(dev, "write_reg: cmd:%#.2x buf:%p len:%#x\n", opcode, buf, len);
+ dev_dbg(dev, "write_reg: cmd:%#.2x buf:%pK len:%#x\n", opcode, buf, len);
memset(&cmd, 0, sizeof(cmd));
cmd.opcode = opcode;
@@ -398,7 +398,7 @@ static ssize_t stm32_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
struct stm32_qspi_cmd cmd;
int err;
- dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#zx\n",
+ dev_dbg(qspi->dev, "read(%#.2x): buf:%pK from:%#.8x len:%#zx\n",
nor->read_opcode, buf, (u32)from, len);
memset(&cmd, 0, sizeof(cmd));
OpenPOWER on IntegriCloud