mmc: queue: let host controllers specify maximum discard timeout

Some host controllers will not operate without a hardware
timeout that is limited in value.  However large discards
require large timeouts, so there needs to be a way to
specify the maximum discard size.

A host controller driver may now specify the maximum discard
timeout possible so that max_discard_sectors can be calculated.

However, for eMMC when the High Capacity Erase Group Size
is not in use, the timeout calculation depends on clock
rate which may change.  For that case Preferred Erase Size
is used instead.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 23 insertions, 10 deletions

diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 6413afa318d2..defc11b4572c 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -101,6 +101,27 @@ static void mmc_request(struct request_queue *q)
 		wake_up_process(mq->thread);
 }
 
+static void mmc_queue_setup_discard(struct request_queue *q,
+				    struct mmc_card *card)
+{
+	unsigned max_discard;
+
+	max_discard = mmc_calc_max_discard(card);
+	if (!max_discard)
+		return;
+
+	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
+	q->limits.max_discard_sectors = max_discard;
+	if (card->erased_byte == 0)
+		q->limits.discard_zeroes_data = 1;
+	q->limits.discard_granularity = card->pref_erase << 9;
+	/* granularity must not be greater than max. discard */
+	if (card->pref_erase > max_discard)
+		q->limits.discard_granularity = 0;
+	if (mmc_can_secure_erase_trim(card))
+		queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q);
+}
+
 /**
  * mmc_init_queue - initialise a queue structure.
  * @mq: mmc queue
@@ -130,16 +151,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
 
 	blk_queue_prep_rq(mq->queue, mmc_prep_request);
 	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
-	if (mmc_can_erase(card)) {
-		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mq->queue);
-		mq->queue->limits.max_discard_sectors = UINT_MAX;
-		if (card->erased_byte == 0)
-			mq->queue->limits.discard_zeroes_data = 1;
-		mq->queue->limits.discard_granularity = card->pref_erase << 9;
-		if (mmc_can_secure_erase_trim(card))
-			queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD,
-						mq->queue);
-	}
+	if (mmc_can_erase(card))
+		mmc_queue_setup_discard(mq->queue, card);
 
 #ifdef CONFIG_MMC_BLOCK_BOUNCE
 	if (host->max_segs == 1) {