Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (152 commits)
  powerpc: Fix hard CPU IDs detection
  powerpc/pmac: Update via-pmu to new syscore_ops
  powerpc/kvm: Fix the build for 32-bit Book 3S (classic) processors
  powerpc/kvm: Fix kvmppc_core_pending_dec
  powerpc: Remove last piece of GEMINI
  powerpc: Fix for Pegasos keyboard and mouse
  powerpc: Make early memory scan more resilient to out of order nodes
  powerpc/pseries/iommu: Cleanup ddw naming
  powerpc/pseries/iommu: Find windows after kexec during boot
  powerpc/pseries/iommu: Remove ddw property when destroying window
  powerpc/pseries/iommu: Add additional checks when changing iommu mask
  powerpc/pseries/iommu: Use correct return type in dupe_ddw_if_already_created
  powerpc: Remove unused/obsolete CONFIG_XICS
  misc: Add CARMA DATA-FPGA Programmer support
  misc: Add CARMA DATA-FPGA Access Driver
  powerpc: Make IRQ_NOREQUEST last to clear, first to set
  powerpc: Integrated Flash controller device tree bindings
  powerpc/85xx: Create dts of each core in CAMP mode for P1020RDB
  powerpc/85xx: Fix PCIe IDSEL for Px020RDB
  powerpc/85xx: P2020 DTS: re-organize dts files
  ...

6 files changed, 2595 insertions, 0 deletions

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e007c6a4b44..d80dcdee88f3 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -481,5 +481,6 @@ source "drivers/misc/cb710/Kconfig"
 source "drivers/misc/iwmc3200top/Kconfig"
 source "drivers/misc/ti-st/Kconfig"
 source "drivers/misc/lis3lv02d/Kconfig"
+source "drivers/misc/carma/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f5468602961f..848e8464faab 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
 obj-y				+= ti-st/
 obj-$(CONFIG_AB8500_PWM)	+= ab8500-pwm.o
 obj-y				+= lis3lv02d/
+obj-y				+= carma/
diff --git a/drivers/misc/carma/Kconfig b/drivers/misc/carma/Kconfig
new file mode 100644
index 000000000000..c90370ed712b
--- /dev/null
+++ b/drivers/misc/carma/Kconfig
@@ -0,0 +1,17 @@
+config CARMA_FPGA
+	tristate "CARMA DATA-FPGA Access Driver"
+	depends on FSL_SOC && PPC_83xx && MEDIA_SUPPORT && HAS_DMA && FSL_DMA
+	select VIDEOBUF_DMA_SG
+	default n
+	help
+	  Say Y here to include support for communicating with the data
+	  processing FPGAs on the OVRO CARMA board.
+
+config CARMA_FPGA_PROGRAM
+	tristate "CARMA DATA-FPGA Programmer"
+	depends on FSL_SOC && PPC_83xx && MEDIA_SUPPORT && HAS_DMA && FSL_DMA
+	select VIDEOBUF_DMA_SG
+	default n
+	help
+	  Say Y here to include support for programming the data processing
+	  FPGAs on the OVRO CARMA board.
diff --git a/drivers/misc/carma/Makefile b/drivers/misc/carma/Makefile
new file mode 100644
index 000000000000..ff36ac2ce534
--- /dev/null
+++ b/drivers/misc/carma/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_CARMA_FPGA)		+= carma-fpga.o
+obj-$(CONFIG_CARMA_FPGA_PROGRAM)	+= carma-fpga-program.o
diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c
new file mode 100644
index 000000000000..7ce6065dc20e
--- /dev/null
+++ b/drivers/misc/carma/carma-fpga-program.c
@@ -0,0 +1,1141 @@
+/*
+ * CARMA Board DATA-FPGA Programmer
+ *
+ * Copyright (c) 2009-2011 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/of_platform.h>
+#include <linux/completion.h>
+#include <linux/miscdevice.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+
+#include <media/videobuf-dma-sg.h>
+
+/* MPC8349EMDS specific get_immrbase() */
+#include <sysdev/fsl_soc.h>
+
+static const char drv_name[] = "carma-fpga-program";
+
+/*
+ * Firmware images are always this exact size
+ *
+ * 12849552 bytes for a CARMA Digitizer Board (EP2S90 FPGAs)
+ * 18662880 bytes for a CARMA Correlator Board (EP2S130 FPGAs)
+ */
+#define FW_SIZE_EP2S90		12849552
+#define FW_SIZE_EP2S130		18662880
+
+struct fpga_dev {
+	struct miscdevice miscdev;
+
+	/* Reference count */
+	struct kref ref;
+
+	/* Device Registers */
+	struct device *dev;
+	void __iomem *regs;
+	void __iomem *immr;
+
+	/* Freescale DMA Device */
+	struct dma_chan *chan;
+
+	/* Interrupts */
+	int irq, status;
+	struct completion completion;
+
+	/* FPGA Bitfile */
+	struct mutex lock;
+
+	struct videobuf_dmabuf vb;
+	bool vb_allocated;
+
+	/* max size and written bytes */
+	size_t fw_size;
+	size_t bytes;
+};
+
+/*
+ * FPGA Bitfile Helpers
+ */
+
+/**
+ * fpga_drop_firmware_data() - drop the bitfile image from memory
+ * @priv: the driver's private data structure
+ *
+ * LOCKING: must hold priv->lock
+ */
+static void fpga_drop_firmware_data(struct fpga_dev *priv)
+{
+	videobuf_dma_free(&priv->vb);
+	priv->vb_allocated = false;
+	priv->bytes = 0;
+}
+
+/*
+ * Private Data Reference Count
+ */
+
+static void fpga_dev_remove(struct kref *ref)
+{
+	struct fpga_dev *priv = container_of(ref, struct fpga_dev, ref);
+
+	/* free any firmware image that was not programmed */
+	fpga_drop_firmware_data(priv);
+
+	mutex_destroy(&priv->lock);
+	kfree(priv);
+}
+
+/*
+ * LED Trigger (could be a seperate module)
+ */
+
+/*
+ * NOTE: this whole thing does have the problem that whenever the led's are
+ * NOTE: first set to use the fpga trigger, they could be in the wrong state
+ */
+
+DEFINE_LED_TRIGGER(ledtrig_fpga);
+
+static void ledtrig_fpga_programmed(bool enabled)
+{
+	if (enabled)
+		led_trigger_event(ledtrig_fpga, LED_FULL);
+	else
+		led_trigger_event(ledtrig_fpga, LED_OFF);
+}
+
+/*
+ * FPGA Register Helpers
+ */
+
+/* Register Definitions */
+#define FPGA_CONFIG_CONTROL		0x40
+#define FPGA_CONFIG_STATUS		0x44
+#define FPGA_CONFIG_FIFO_SIZE		0x48
+#define FPGA_CONFIG_FIFO_USED		0x4C
+#define FPGA_CONFIG_TOTAL_BYTE_COUNT	0x50
+#define FPGA_CONFIG_CUR_BYTE_COUNT	0x54
+
+#define FPGA_FIFO_ADDRESS		0x3000
+
+static int fpga_fifo_size(void __iomem *regs)
+{
+	return ioread32be(regs + FPGA_CONFIG_FIFO_SIZE);
+}
+
+#define CFG_STATUS_ERR_MASK	0xfffe
+
+static int fpga_config_error(void __iomem *regs)
+{
+	return ioread32be(regs + FPGA_CONFIG_STATUS) & CFG_STATUS_ERR_MASK;
+}
+
+static int fpga_fifo_empty(void __iomem *regs)
+{
+	return ioread32be(regs + FPGA_CONFIG_FIFO_USED) == 0;
+}
+
+static void fpga_fifo_write(void __iomem *regs, u32 val)
+{
+	iowrite32be(val, regs + FPGA_FIFO_ADDRESS);
+}
+
+static void fpga_set_byte_count(void __iomem *regs, u32 count)
+{
+	iowrite32be(count, regs + FPGA_CONFIG_TOTAL_BYTE_COUNT);
+}
+
+#define CFG_CTL_ENABLE	(1 << 0)
+#define CFG_CTL_RESET	(1 << 1)
+#define CFG_CTL_DMA	(1 << 2)
+
+static void fpga_programmer_enable(struct fpga_dev *priv, bool dma)
+{
+	u32 val;
+
+	val = (dma) ? (CFG_CTL_ENABLE | CFG_CTL_DMA) : CFG_CTL_ENABLE;
+	iowrite32be(val, priv->regs + FPGA_CONFIG_CONTROL);
+}
+
+static void fpga_programmer_disable(struct fpga_dev *priv)
+{
+	iowrite32be(0x0, priv->regs + FPGA_CONFIG_CONTROL);
+}
+
+static void fpga_dump_registers(struct fpga_dev *priv)
+{
+	u32 control, status, size, used, total, curr;
+
+	/* good status: do nothing */
+	if (priv->status == 0)
+		return;
+
+	/* Dump all status registers */
+	control = ioread32be(priv->regs + FPGA_CONFIG_CONTROL);
+	status = ioread32be(priv->regs + FPGA_CONFIG_STATUS);
+	size = ioread32be(priv->regs + FPGA_CONFIG_FIFO_SIZE);
+	used = ioread32be(priv->regs + FPGA_CONFIG_FIFO_USED);
+	total = ioread32be(priv->regs + FPGA_CONFIG_TOTAL_BYTE_COUNT);
+	curr = ioread32be(priv->regs + FPGA_CONFIG_CUR_BYTE_COUNT);
+
+	dev_err(priv->dev, "Configuration failed, dumping status registers\n");
+	dev_err(priv->dev, "Control:    0x%.8x\n", control);
+	dev_err(priv->dev, "Status:     0x%.8x\n", status);
+	dev_err(priv->dev, "FIFO Size:  0x%.8x\n", size);
+	dev_err(priv->dev, "FIFO Used:  0x%.8x\n", used);
+	dev_err(priv->dev, "FIFO Total: 0x%.8x\n", total);
+	dev_err(priv->dev, "FIFO Curr:  0x%.8x\n", curr);
+}
+
+/*
+ * FPGA Power Supply Code
+ */
+
+#define CTL_PWR_CONTROL		0x2006
+#define CTL_PWR_STATUS		0x200A
+#define CTL_PWR_FAIL		0x200B
+
+#define PWR_CONTROL_ENABLE	0x01
+
+#define PWR_STATUS_ERROR_MASK	0x10
+#define PWR_STATUS_GOOD		0x0f
+
+/*
+ * Determine if the FPGA power is good for all supplies
+ */
+static bool fpga_power_good(struct fpga_dev *priv)
+{
+	u8 val;
+
+	val = ioread8(priv->regs + CTL_PWR_STATUS);
+	if (val & PWR_STATUS_ERROR_MASK)
+		return false;
+
+	return val == PWR_STATUS_GOOD;
+}
+
+/*
+ * Disable the FPGA power supplies
+ */
+static void fpga_disable_power_supplies(struct fpga_dev *priv)
+{
+	unsigned long start;
+	u8 val;
+
+	iowrite8(0x0, priv->regs + CTL_PWR_CONTROL);
+
+	/*
+	 * Wait 500ms for the power rails to discharge
+	 *
+	 * Without this delay, the CTL-CPLD state machine can get into a
+	 * state where it is waiting for the power-goods to assert, but they
+	 * never do. This only happens when enabling and disabling the
+	 * power sequencer very rapidly.
+	 *
+	 * The loop below will also wait for the power goods to de-assert,
+	 * but testing has shown that they are always disabled by the time
+	 * the sleep completes. However, omitting the sleep and only waiting
+	 * for the power-goods to de-assert was not sufficient to ensure
+	 * that the power sequencer would not wedge itself.
+	 */
+	msleep(500);
+
+	start = jiffies;
+	while (time_before(jiffies, start + HZ)) {
+		val = ioread8(priv->regs + CTL_PWR_STATUS);
+		if (!(val & PWR_STATUS_GOOD))
+			break;
+
+		usleep_range(5000, 10000);
+	}
+
+	val = ioread8(priv->regs + CTL_PWR_STATUS);
+	if (val & PWR_STATUS_GOOD) {
+		dev_err(priv->dev, "power disable failed: "
+				   "power goods: status 0x%.2x\n", val);
+	}
+
+	if (val & PWR_STATUS_ERROR_MASK) {
+		dev_err(priv->dev, "power disable failed: "
+				   "alarm bit set: status 0x%.2x\n", val);
+	}
+}
+
+/**
+ * fpga_enable_power_supplies() - enable the DATA-FPGA power supplies
+ * @priv: the driver's private data structure
+ *
+ * Enable the DATA-FPGA power supplies, waiting up to 1 second for
+ * them to enable successfully.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int fpga_enable_power_supplies(struct fpga_dev *priv)
+{
+	unsigned long start = jiffies;
+
+	if (fpga_power_good(priv)) {
+		dev_dbg(priv->dev, "power was already good\n");
+		return 0;
+	}
+
+	iowrite8(PWR_CONTROL_ENABLE, priv->regs + CTL_PWR_CONTROL);
+	while (time_before(jiffies, start + HZ)) {
+		if (fpga_power_good(priv))
+			return 0;
+
+		usleep_range(5000, 10000);
+	}
+
+	return fpga_power_good(priv) ? 0 : -ETIMEDOUT;
+}
+
+/*
+ * Determine if the FPGA power supplies are all enabled
+ */
+static bool fpga_power_enabled(struct fpga_dev *priv)
+{
+	u8 val;
+
+	val = ioread8(priv->regs + CTL_PWR_CONTROL);
+	if (val & PWR_CONTROL_ENABLE)
+		return true;
+
+	return false;
+}
+
+/*
+ * Determine if the FPGA's are programmed and running correctly
+ */
+static bool fpga_running(struct fpga_dev *priv)
+{
+	if (!fpga_power_good(priv))
+		return false;
+
+	/* Check the config done bit */
+	return ioread32be(priv->regs + FPGA_CONFIG_STATUS) & (1 << 18);
+}
+
+/*
+ * FPGA Programming Code
+ */
+
+/**
+ * fpga_program_block() - put a block of data into the programmer's FIFO
+ * @priv: the driver's private data structure
+ * @buf: the data to program
+ * @count: the length of data to program (must be a multiple of 4 bytes)
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int fpga_program_block(struct fpga_dev *priv, void *buf, size_t count)
+{
+	u32 *data = buf;
+	int size = fpga_fifo_size(priv->regs);
+	int i, len;
+	unsigned long timeout;
+
+	/* enforce correct data length for the FIFO */
+	BUG_ON(count % 4 != 0);
+
+	while (count > 0) {
+
+		/* Get the size of the block to write (maximum is FIFO_SIZE) */
+		len = min_t(size_t, count, size);
+		timeout = jiffies + HZ / 4;
+
+		/* Write the block */
+		for (i = 0; i < len / 4; i++)
+			fpga_fifo_write(priv->regs, data[i]);
+
+		/* Update the amounts left */
+		count -= len;
+		data += len / 4;
+
+		/* Wait for the fifo to empty */
+		while (true) {
+
+			if (fpga_fifo_empty(priv->regs)) {
+				break;
+			} else {
+				dev_dbg(priv->dev, "Fifo not empty\n");
+				cpu_relax();
+			}
+
+			if (fpga_config_error(priv->regs)) {
+				dev_err(priv->dev, "Error detected\n");
+				return -EIO;
+			}
+
+			if (time_after(jiffies, timeout)) {
+				dev_err(priv->dev, "Fifo drain timeout\n");
+				return -ETIMEDOUT;
+			}
+
+			usleep_range(5000, 10000);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * fpga_program_cpu() - program the DATA-FPGA's using the CPU
+ * @priv: the driver's private data structure
+ *
+ * This is useful when the DMA programming method fails. It is possible to
+ * wedge the Freescale DMA controller such that the DMA programming method
+ * always fails. This method has always succeeded.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static noinline int fpga_program_cpu(struct fpga_dev *priv)
+{
+	int ret;
+
+	/* Disable the programmer */
+	fpga_programmer_disable(priv);
+
+	/* Set the total byte count */
+	fpga_set_byte_count(priv->regs, priv->bytes);
+	dev_dbg(priv->dev, "total byte count %u bytes\n", priv->bytes);
+
+	/* Enable the controller for programming */
+	fpga_programmer_enable(priv, false);
+	dev_dbg(priv->dev, "enabled the controller\n");
+
+	/* Write each chunk of the FPGA bitfile to FPGA programmer */
+	ret = fpga_program_block(priv, priv->vb.vaddr, priv->bytes);
+	if (ret)
+		goto out_disable_controller;
+
+	/* Wait for the interrupt handler to signal that programming finished */
+	ret = wait_for_completion_timeout(&priv->completion, 2 * HZ);
+	if (!ret) {
+		dev_err(priv->dev, "Timed out waiting for completion\n");
+		ret = -ETIMEDOUT;
+		goto out_disable_controller;
+	}
+
+	/* Retrieve the status from the interrupt handler */
+	ret = priv->status;
+
+out_disable_controller:
+	fpga_programmer_disable(priv);
+	return ret;
+}
+
+#define FIFO_DMA_ADDRESS	0xf0003000
+#define FIFO_MAX_LEN		4096
+
+/**
+ * fpga_program_dma() - program the DATA-FPGA's using the DMA engine
+ * @priv: the driver's private data structure
+ *
+ * Program the DATA-FPGA's using the Freescale DMA engine. This requires that
+ * the engine is programmed such that the hardware DMA request lines can
+ * control the entire DMA transaction. The system controller FPGA then
+ * completely offloads the programming from the CPU.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static noinline int fpga_program_dma(struct fpga_dev *priv)
+{
+	struct videobuf_dmabuf *vb = &priv->vb;
+	struct dma_chan *chan = priv->chan;
+	struct dma_async_tx_descriptor *tx;
+	size_t num_pages, len, avail = 0;
+	struct dma_slave_config config;
+	struct scatterlist *sg;
+	struct sg_table table;
+	dma_cookie_t cookie;
+	int ret, i;
+
+	/* Disable the programmer */
+	fpga_programmer_disable(priv);
+
+	/* Allocate a scatterlist for the DMA destination */
+	num_pages = DIV_ROUND_UP(priv->bytes, FIFO_MAX_LEN);
+	ret = sg_alloc_table(&table, num_pages, GFP_KERNEL);
+	if (ret) {
+		dev_err(priv->dev, "Unable to allocate dst scatterlist\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	/*
+	 * This is an ugly hack
+	 *
+	 * We fill in a scatterlist as if it were mapped for DMA. This is
+	 * necessary because there exists no better structure for this
+	 * inside the kernel code.
+	 *
+	 * As an added bonus, we can use the DMAEngine API for all of this,
+	 * rather than inventing another extremely similar API.
+	 */
+	avail = priv->bytes;
+	for_each_sg(table.sgl, sg, num_pages, i) {
+		len = min_t(size_t, avail, FIFO_MAX_LEN);
+		sg_dma_address(sg) = FIFO_DMA_ADDRESS;
+		sg_dma_len(sg) = len;
+
+		avail -= len;
+	}
+
+	/* Map the buffer for DMA */
+	ret = videobuf_dma_map(priv->dev, &priv->vb);
+	if (ret) {
+		dev_err(priv->dev, "Unable to map buffer for DMA\n");
+		goto out_free_table;
+	}
+
+	/*
+	 * Configure the DMA channel to transfer FIFO_SIZE / 2 bytes per
+	 * transaction, and then put it under external control
+	 */
+	memset(&config, 0, sizeof(config));
+	config.direction = DMA_TO_DEVICE;
+	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	config.dst_maxburst = fpga_fifo_size(priv->regs) / 2 / 4;
+	ret = chan->device->device_control(chan, DMA_SLAVE_CONFIG,
+					   (unsigned long)&config);
+	if (ret) {
+		dev_err(priv->dev, "DMA slave configuration failed\n");
+		goto out_dma_unmap;
+	}
+
+	ret = chan->device->device_control(chan, FSLDMA_EXTERNAL_START, 1);
+	if (ret) {
+		dev_err(priv->dev, "DMA external control setup failed\n");
+		goto out_dma_unmap;
+	}
+
+	/* setup and submit the DMA transaction */
+	tx = chan->device->device_prep_dma_sg(chan,
+					      table.sgl, num_pages,
+					      vb->sglist, vb->sglen, 0);
+	if (!tx) {
+		dev_err(priv->dev, "Unable to prep DMA transaction\n");
+		ret = -ENOMEM;
+		goto out_dma_unmap;
+	}
+
+	cookie = tx->tx_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(priv->dev, "Unable to submit DMA transaction\n");
+		ret = -ENOMEM;
+		goto out_dma_unmap;
+	}
+
+	dma_async_memcpy_issue_pending(chan);
+
+	/* Set the total byte count */
+	fpga_set_byte_count(priv->regs, priv->bytes);
+	dev_dbg(priv->dev, "total byte count %u bytes\n", priv->bytes);
+
+	/* Enable the controller for DMA programming */
+	fpga_programmer_enable(priv, true);
+	dev_dbg(priv->dev, "enabled the controller\n");
+
+	/* Wait for the interrupt handler to signal that programming finished */
+	ret = wait_for_completion_timeout(&priv->completion, 2 * HZ);
+	if (!ret) {
+		dev_err(priv->dev, "Timed out waiting for completion\n");
+		ret = -ETIMEDOUT;
+		goto out_disable_controller;
+	}
+
+	/* Retrieve the status from the interrupt handler */
+	ret = priv->status;
+
+out_disable_controller:
+	fpga_programmer_disable(priv);
+out_dma_unmap:
+	videobuf_dma_unmap(priv->dev, vb);
+out_free_table:
+	sg_free_table(&table);
+out_return:
+	return ret;
+}
+
+/*
+ * Interrupt Handling
+ */
+
+static irqreturn_t fpga_irq(int irq, void *dev_id)
+{
+	struct fpga_dev *priv = dev_id;
+
+	/* Save the status */
+	priv->status = fpga_config_error(priv->regs) ? -EIO : 0;
+	dev_dbg(priv->dev, "INTERRUPT status %d\n", priv->status);
+	fpga_dump_registers(priv);
+
+	/* Disabling the programmer clears the interrupt */
+	fpga_programmer_disable(priv);
+
+	/* Notify any waiters */
+	complete(&priv->completion);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * SYSFS Helpers
+ */
+
+/**
+ * fpga_do_stop() - deconfigure (reset) the DATA-FPGA's
+ * @priv: the driver's private data structure
+ *
+ * LOCKING: must hold priv->lock
+ */
+static int fpga_do_stop(struct fpga_dev *priv)
+{
+	u32 val;
+
+	/* Set the led to unprogrammed */
+	ledtrig_fpga_programmed(false);
+
+	/* Pulse the config line to reset the FPGA's */
+	val = CFG_CTL_ENABLE | CFG_CTL_RESET;
+	iowrite32be(val, priv->regs + FPGA_CONFIG_CONTROL);
+	iowrite32be(0x0, priv->regs + FPGA_CONFIG_CONTROL);
+
+	return 0;
+}
+
+static noinline int fpga_do_program(struct fpga_dev *priv)
+{
+	int ret;
+
+	if (priv->bytes != priv->fw_size) {
+		dev_err(priv->dev, "Incorrect bitfile size: got %zu bytes, "
+				   "should be %zu bytes\n",
+				   priv->bytes, priv->fw_size);
+		return -EINVAL;
+	}
+
+	if (!fpga_power_enabled(priv)) {
+		dev_err(priv->dev, "Power not enabled\n");
+		return -EINVAL;
+	}
+
+	if (!fpga_power_good(priv)) {
+		dev_err(priv->dev, "Power not good\n");
+		return -EINVAL;
+	}
+
+	/* Set the LED to unprogrammed */
+	ledtrig_fpga_programmed(false);
+
+	/* Try to program the FPGA's using DMA */
+	ret = fpga_program_dma(priv);
+
+	/* If DMA failed or doesn't exist, try with CPU */
+	if (ret) {
+		dev_warn(priv->dev, "Falling back to CPU programming\n");
+		ret = fpga_program_cpu(priv);
+	}
+
+	if (ret) {
+		dev_err(priv->dev, "Unable to program FPGA's\n");
+		return ret;
+	}
+
+	/* Drop the firmware bitfile from memory */
+	fpga_drop_firmware_data(priv);
+
+	dev_dbg(priv->dev, "FPGA programming successful\n");
+	ledtrig_fpga_programmed(true);
+
+	return 0;
+}
+
+/*
+ * File Operations
+ */
+
+static int fpga_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * The miscdevice layer puts our struct miscdevice into the
+	 * filp->private_data field. We use this to find our private
+	 * data and then overwrite it with our own private structure.
+	 */
+	struct fpga_dev *priv = container_of(filp->private_data,
+					     struct fpga_dev, miscdev);
+	unsigned int nr_pages;
+	int ret;
+
+	/* We only allow one process at a time */
+	ret = mutex_lock_interruptible(&priv->lock);
+	if (ret)
+		return ret;
+
+	filp->private_data = priv;
+	kref_get(&priv->ref);
+
+	/* Truncation: drop any existing data */
+	if (filp->f_flags & O_TRUNC)
+		priv->bytes = 0;
+
+	/* Check if we have already allocated a buffer */
+	if (priv->vb_allocated)
+		return 0;
+
+	/* Allocate a buffer to hold enough data for the bitfile */
+	nr_pages = DIV_ROUND_UP(priv->fw_size, PAGE_SIZE);
+	ret = videobuf_dma_init_kernel(&priv->vb, DMA_TO_DEVICE, nr_pages);
+	if (ret) {
+		dev_err(priv->dev, "unable to allocate data buffer\n");
+		mutex_unlock(&priv->lock);
+		kref_put(&priv->ref, fpga_dev_remove);
+		return ret;
+	}
+
+	priv->vb_allocated = true;
+	return 0;
+}
+
+static int fpga_release(struct inode *inode, struct file *filp)
+{
+	struct fpga_dev *priv = filp->private_data;
+
+	mutex_unlock(&priv->lock);
+	kref_put(&priv->ref, fpga_dev_remove);
+	return 0;
+}
+
+static ssize_t fpga_write(struct file *filp, const char __user *buf,
+			  size_t count, loff_t *f_pos)
+{
+	struct fpga_dev *priv = filp->private_data;
+
+	/* FPGA bitfiles have an exact size: disallow anything else */
+	if (priv->bytes >= priv->fw_size)
+		return -ENOSPC;
+
+	count = min_t(size_t, priv->fw_size - priv->bytes, count);
+	if (copy_from_user(priv->vb.vaddr + priv->bytes, buf, count))
+		return -EFAULT;
+
+	priv->bytes += count;
+	return count;
+}
+
+static ssize_t fpga_read(struct file *filp, char __user *buf, size_t count,
+			 loff_t *f_pos)
+{
+	struct fpga_dev *priv = filp->private_data;
+
+	count = min_t(size_t, priv->bytes - *f_pos, count);
+	if (copy_to_user(buf, priv->vb.vaddr + *f_pos, count))
+		return -EFAULT;
+
+	*f_pos += count;
+	return count;
+}
+
+static loff_t fpga_llseek(struct file *filp, loff_t offset, int origin)
+{
+	struct fpga_dev *priv = filp->private_data;
+	loff_t newpos;
+
+	/* only read-only opens are allowed to seek */
+	if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
+		return -EINVAL;
+
+	switch (origin) {
+	case SEEK_SET: /* seek relative to the beginning of the file */
+		newpos = offset;
+		break;
+	case SEEK_CUR: /* seek relative to current position in the file */
+		newpos = filp->f_pos + offset;
+		break;
+	case SEEK_END: /* seek relative to the end of the file */
+		newpos = priv->fw_size - offset;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* check for sanity */
+	if (newpos > priv->fw_size)
+		return -EINVAL;
+
+	filp->f_pos = newpos;
+	return newpos;
+}
+
+static const struct file_operations fpga_fops = {
+	.open		= fpga_open,
+	.release	= fpga_release,
+	.write		= fpga_write,
+	.read		= fpga_read,
+	.llseek		= fpga_llseek,
+};
+
+/*
+ * Device Attributes
+ */
+
+static ssize_t pfail_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	u8 val;
+
+	val = ioread8(priv->regs + CTL_PWR_FAIL);
+	return snprintf(buf, PAGE_SIZE, "0x%.2x\n", val);
+}
+
+static ssize_t pgood_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	return snprintf(buf, PAGE_SIZE, "%d\n", fpga_power_good(priv));
+}
+
+static ssize_t penable_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	return snprintf(buf, PAGE_SIZE, "%d\n", fpga_power_enabled(priv));
+}
+
+static ssize_t penable_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	if (strict_strtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val) {
+		ret = fpga_enable_power_supplies(priv);
+		if (ret)
+			return ret;
+	} else {
+		fpga_do_stop(priv);
+		fpga_disable_power_supplies(priv);
+	}
+
+	return count;
+}
+
+static ssize_t program_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	return snprintf(buf, PAGE_SIZE, "%d\n", fpga_running(priv));
+}
+
+static ssize_t program_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct fpga_dev *priv = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	if (strict_strtoul(buf, 0, &val))
+		return -EINVAL;
+
+	/* We can't have an image writer and be programming simultaneously */
+	if (mutex_lock_interruptible(&priv->lock))
+		return -ERESTARTSYS;
+
+	/* Program or Reset the FPGA's */
+	ret = val ? fpga_do_program(priv) : fpga_do_stop(priv);
+	if (ret)
+		goto out_unlock;
+
+	/* Success */
+	ret = count;
+
+out_unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static DEVICE_ATTR(power_fail, S_IRUGO, pfail_show, NULL);
+static DEVICE_ATTR(power_good, S_IRUGO, pgood_show, NULL);
+static DEVICE_ATTR(power_enable, S_IRUGO | S_IWUSR,
+		   penable_show, penable_store);
+
+static DEVICE_ATTR(program, S_IRUGO | S_IWUSR,
+		   program_show, program_store);
+
+static struct attribute *fpga_attributes[] = {
+	&dev_attr_power_fail.attr,
+	&dev_attr_power_good.attr,
+	&dev_attr_power_enable.attr,
+	&dev_attr_program.attr,
+	NULL,
+};
+
+static const struct attribute_group fpga_attr_group = {
+	.attrs = fpga_attributes,
+};
+
+/*
+ * OpenFirmware Device Subsystem
+ */
+
+#define SYS_REG_VERSION		0x00
+#define SYS_REG_GEOGRAPHIC	0x10
+
+static bool dma_filter(struct dma_chan *chan, void *data)
+{
+	/*
+	 * DMA Channel #0 is the only acceptable device
+	 *
+	 * This probably won't survive an unload/load cycle of the Freescale
+	 * DMAEngine driver, but that won't be a problem
+	 */
+	return chan->chan_id == 0 && chan->device->dev_id == 0;
+}
+
+static int fpga_of_remove(struct platform_device *op)
+{
+	struct fpga_dev *priv = dev_get_drvdata(&op->dev);
+	struct device *this_device = priv->miscdev.this_device;
+
+	sysfs_remove_group(&this_device->kobj, &fpga_attr_group);
+	misc_deregister(&priv->miscdev);
+
+	free_irq(priv->irq, priv);
+	irq_dispose_mapping(priv->irq);
+
+	/* make sure the power supplies are off */
+	fpga_disable_power_supplies(priv);
+
+	/* unmap registers */
+	iounmap(priv->immr);
+	iounmap(priv->regs);
+
+	dma_release_channel(priv->chan);
+
+	/* drop our reference to the private data structure */
+	kref_put(&priv->ref, fpga_dev_remove);
+	return 0;
+}
+
+/* CTL-CPLD Version Register */
+#define CTL_CPLD_VERSION	0x2000
+
+static int fpga_of_probe(struct platform_device *op,
+			 const struct of_device_id *match)
+{
+	struct device_node *of_node = op->dev.of_node;
+	struct device *this_device;
+	struct fpga_dev *priv;
+	dma_cap_mask_t mask;
+	u32 ver;
+	int ret;
+
+	/* Allocate private data */
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&op->dev, "Unable to allocate private data\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	/* Setup the miscdevice */
+	priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+	priv->miscdev.name = drv_name;
+	priv->miscdev.fops = &fpga_fops;
+
+	kref_init(&priv->ref);
+
+	dev_set_drvdata(&op->dev, priv);
+	priv->dev = &op->dev;
+	mutex_init(&priv->lock);
+	init_completion(&priv->completion);
+	videobuf_dma_init(&priv->vb);
+
+	dev_set_drvdata(priv->dev, priv);
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_MEMCPY, mask);
+	dma_cap_set(DMA_INTERRUPT, mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_cap_set(DMA_SG, mask);
+
+	/* Get control of DMA channel #0 */
+	priv->chan = dma_request_channel(mask, dma_filter, NULL);
+	if (!priv->chan) {
+		dev_err(&op->dev, "Unable to acquire DMA channel #0\n");
+		ret = -ENODEV;
+		goto out_free_priv;
+	}
+
+	/* Remap the registers for use */
+	priv->regs = of_iomap(of_node, 0);
+	if (!priv->regs) {
+		dev_err(&op->dev, "Unable to ioremap registers\n");
+		ret = -ENOMEM;
+		goto out_dma_release_channel;
+	}
+
+	/* Remap the IMMR for use */
+	priv->immr = ioremap(get_immrbase(), 0x100000);
+	if (!priv->immr) {
+		dev_err(&op->dev, "Unable to ioremap IMMR\n");
+		ret = -ENOMEM;
+		goto out_unmap_regs;
+	}
+
+	/*
+	 * Check that external DMA is configured
+	 *
+	 * U-Boot does this for us, but we should check it and bail out if
+	 * there is a problem. Failing to have this register setup correctly
+	 * will cause the DMA controller to transfer a single cacheline
+	 * worth of data, then wedge itself.
+	 */
+	if ((ioread32be(priv->immr + 0x114) & 0xE00) != 0xE00) {
+		dev_err(&op->dev, "External DMA control not configured\n");
+		ret = -ENODEV;
+		goto out_unmap_immr;
+	}
+
+	/*
+	 * Check the CTL-CPLD version
+	 *
+	 * This driver uses the CTL-CPLD DATA-FPGA power sequencer, and we
+	 * don't want to run on any version of the CTL-CPLD that does not use
+	 * a compatible register layout.
+	 *
+	 * v2: changed register layout, added power sequencer
+	 * v3: added glitch filter on the i2c overcurrent/overtemp outputs
+	 */
+	ver = ioread8(priv->regs + CTL_CPLD_VERSION);
+	if (ver != 0x02 && ver != 0x03) {
+		dev_err(&op->dev, "CTL-CPLD is not version 0x02 or 0x03!\n");
+		ret = -ENODEV;
+		goto out_unmap_immr;
+	}
+
+	/* Set the exact size that the firmware image should be */
+	ver = ioread32be(priv->regs + SYS_REG_VERSION);
+	priv->fw_size = (ver & (1 << 18)) ? FW_SIZE_EP2S130 : FW_SIZE_EP2S90;
+
+	/* Find the correct IRQ number */
+	priv->irq = irq_of_parse_and_map(of_node, 0);
+	if (priv->irq == NO_IRQ) {
+		dev_err(&op->dev, "Unable to find IRQ line\n");
+		ret = -ENODEV;
+		goto out_unmap_immr;
+	}
+
+	/* Request the IRQ */
+	ret = request_irq(priv->irq, fpga_irq, IRQF_SHARED, drv_name, priv);
+	if (ret) {
+		dev_err(&op->dev, "Unable to request IRQ %d\n", priv->irq);
+		ret = -ENODEV;
+		goto out_irq_dispose_mapping;
+	}
+
+	/* Reset and stop the FPGA's, just in case */
+	fpga_do_stop(priv);
+
+	/* Register the miscdevice */
+	ret = misc_register(&priv->miscdev);
+	if (ret) {
+		dev_err(&op->dev, "Unable to register miscdevice\n");
+		goto out_free_irq;
+	}
+
+	/* Create the sysfs files */
+	this_device = priv->miscdev.this_device;
+	dev_set_drvdata(this_device, priv);
+	ret = sysfs_create_group(&this_device->kobj, &fpga_attr_group);
+	if (ret) {
+		dev_err(&op->dev, "Unable to create sysfs files\n");
+		goto out_misc_deregister;
+	}
+
+	dev_info(priv->dev, "CARMA FPGA Programmer: %s rev%s with %s FPGAs\n",
+			(ver & (1 << 17)) ? "Correlator" : "Digitizer",
+			(ver & (1 << 16)) ? "B" : "A",
+			(ver & (1 << 18)) ? "EP2S130" : "EP2S90");
+
+	return 0;
+
+out_misc_deregister:
+	misc_deregister(&priv->miscdev);
+out_free_irq:
+	free_irq(priv->irq, priv);
+out_irq_dispose_mapping:
+	irq_dispose_mapping(priv->irq);
+out_unmap_immr:
+	iounmap(priv->immr);
+out_unmap_regs:
+	iounmap(priv->regs);
+out_dma_release_channel:
+	dma_release_channel(priv->chan);
+out_free_priv:
+	kref_put(&priv->ref, fpga_dev_remove);
+out_return:
+	return ret;
+}
+
+static struct of_device_id fpga_of_match[] = {
+	{ .compatible = "carma,fpga-programmer", },
+	{},
+};
+
+static struct of_platform_driver fpga_of_driver = {
+	.probe		= fpga_of_probe,
+	.remove		= fpga_of_remove,
+	.driver		= {
+		.name		= drv_name,
+		.of_match_table	= fpga_of_match,
+		.owner		= THIS_MODULE,
+	},
+};
+
+/*
+ * Module Init / Exit
+ */
+
+static int __init fpga_init(void)
+{
+	led_trigger_register_simple("fpga", &ledtrig_fpga);
+	return of_register_platform_driver(&fpga_of_driver);
+}
+
+static void __exit fpga_exit(void)
+{
+	of_unregister_platform_driver(&fpga_of_driver);
+	led_trigger_unregister_simple(ledtrig_fpga);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("CARMA Board DATA-FPGA Programmer");
+MODULE_LICENSE("GPL");
+
+module_init(fpga_init);
+module_exit(fpga_exit);
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
new file mode 100644
index 000000000000..3965821fef17
--- /dev/null
+++ b/drivers/misc/carma/carma-fpga.c
@@ -0,0 +1,1433 @@
+/*
+ * CARMA DATA-FPGA Access Driver
+ *
+ * Copyright (c) 2009-2011 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * FPGA Memory Dump Format
+ *
+ * FPGA #0 control registers (32 x 32-bit words)
+ * FPGA #1 control registers (32 x 32-bit words)
+ * FPGA #2 control registers (32 x 32-bit words)
+ * FPGA #3 control registers (32 x 32-bit words)
+ * SYSFPGA control registers (32 x 32-bit words)
+ * FPGA #0 correlation array (NUM_CORL0 correlation blocks)
+ * FPGA #1 correlation array (NUM_CORL1 correlation blocks)
+ * FPGA #2 correlation array (NUM_CORL2 correlation blocks)
+ * FPGA #3 correlation array (NUM_CORL3 correlation blocks)
+ *
+ * Each correlation array consists of:
+ *
+ * Correlation Data      (2 x NUM_LAGSn x 32-bit words)
+ * Pipeline Metadata     (2 x NUM_METAn x 32-bit words)
+ * Quantization Counters (2 x NUM_QCNTn x 32-bit words)
+ *
+ * The NUM_CORLn, NUM_LAGSn, NUM_METAn, and NUM_QCNTn values come from
+ * the FPGA configuration registers. They do not change once the FPGA's
+ * have been programmed, they only change on re-programming.
+ */
+
+/*
+ * Basic Description:
+ *
+ * This driver is used to capture correlation spectra off of the four data
+ * processing FPGAs. The FPGAs are often reprogrammed at runtime, therefore
+ * this driver supports dynamic enable/disable of capture while the device
+ * remains open.
+ *
+ * The nominal capture rate is 64Hz (every 15.625ms). To facilitate this fast
+ * capture rate, all buffers are pre-allocated to avoid any potentially long
+ * running memory allocations while capturing.
+ *
+ * There are two lists and one pointer which are used to keep track of the
+ * different states of data buffers.
+ *
+ * 1) free list
+ * This list holds all empty data buffers which are ready to receive data.
+ *
+ * 2) inflight pointer
+ * This pointer holds the currently inflight data buffer. This buffer is having
+ * data copied into it by the DMA engine.
+ *
+ * 3) used list
+ * This list holds data buffers which have been filled, and are waiting to be
+ * read by userspace.
+ *
+ * All buffers start life on the free list, then move successively to the
+ * inflight pointer, and then to the used list. After they have been read by
+ * userspace, they are moved back to the free list. The cycle repeats as long
+ * as necessary.
+ *
+ * It should be noted that all buffers are mapped and ready for DMA when they
+ * are on any of the three lists. They are only unmapped when they are in the
+ * process of being read by userspace.
+ */
+
+/*
+ * Notes on the IRQ masking scheme:
+ *
+ * The IRQ masking scheme here is different than most other hardware. The only
+ * way for the DATA-FPGAs to detect if the kernel has taken too long to copy
+ * the data is if the status registers are not cleared before the next
+ * correlation data dump is ready.
+ *
+ * The interrupt line is connected to the status registers, such that when they
+ * are cleared, the interrupt is de-asserted. Therein lies our problem. We need
+ * to schedule a long-running DMA operation and return from the interrupt
+ * handler quickly, but we cannot clear the status registers.
+ *
+ * To handle this, the system controller FPGA has the capability to connect the
+ * interrupt line to a user-controlled GPIO pin. This pin is driven high
+ * (unasserted) and left that way. To mask the interrupt, we change the
+ * interrupt source to the GPIO pin. Tada, we hid the interrupt. :)
+ */
+
+#include <linux/of_platform.h>
+#include <linux/dma-mapping.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/seq_file.h>
+#include <linux/highmem.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+#include <linux/io.h>
+
+#include <media/videobuf-dma-sg.h>
+
+/* system controller registers */
+#define SYS_IRQ_SOURCE_CTL	0x24
+#define SYS_IRQ_OUTPUT_EN	0x28
+#define SYS_IRQ_OUTPUT_DATA	0x2C
+#define SYS_IRQ_INPUT_DATA	0x30
+#define SYS_FPGA_CONFIG_STATUS	0x44
+
+/* GPIO IRQ line assignment */
+#define IRQ_CORL_DONE		0x10
+
+/* FPGA registers */
+#define MMAP_REG_VERSION	0x00
+#define MMAP_REG_CORL_CONF1	0x08
+#define MMAP_REG_CORL_CONF2	0x0C
+#define MMAP_REG_STATUS		0x48
+
+#define SYS_FPGA_BLOCK		0xF0000000
+
+#define DATA_FPGA_START		0x400000
+#define DATA_FPGA_SIZE		0x80000
+
+static const char drv_name[] = "carma-fpga";
+
+#define NUM_FPGA	4
+
+#define MIN_DATA_BUFS	8
+#define MAX_DATA_BUFS	64
+
+struct fpga_info {
+	unsigned int num_lag_ram;
+	unsigned int blk_size;
+};
+
+struct data_buf {
+	struct list_head entry;
+	struct videobuf_dmabuf vb;
+	size_t size;
+};
+
+struct fpga_device {
+	/* character device */
+	struct miscdevice miscdev;
+	struct device *dev;
+	struct mutex mutex;
+
+	/* reference count */
+	struct kref ref;
+
+	/* FPGA registers and information */
+	struct fpga_info info[NUM_FPGA];
+	void __iomem *regs;
+	int irq;
+
+	/* FPGA Physical Address/Size Information */
+	resource_size_t phys_addr;
+	size_t phys_size;
+
+	/* DMA structures */
+	struct sg_table corl_table;
+	unsigned int corl_nents;
+	struct dma_chan *chan;
+
+	/* Protection for all members below */
+	spinlock_t lock;
+
+	/* Device enable/disable flag */
+	bool enabled;
+
+	/* Correlation data buffers */
+	wait_queue_head_t wait;
+	struct list_head free;
+	struct list_head used;
+	struct data_buf *inflight;
+
+	/* Information about data buffers */
+	unsigned int num_dropped;
+	unsigned int num_buffers;
+	size_t bufsize;
+	struct dentry *dbg_entry;
+};
+
+struct fpga_reader {
+	struct fpga_device *priv;
+	struct data_buf *buf;
+	off_t buf_start;
+};
+
+static void fpga_device_release(struct kref *ref)
+{
+	struct fpga_device *priv = container_of(ref, struct fpga_device, ref);
+
+	/* the last reader has exited, cleanup the last bits */
+	mutex_destroy(&priv->mutex);
+	kfree(priv);
+}
+
+/*
+ * Data Buffer Allocation Helpers
+ */
+
+/**
+ * data_free_buffer() - free a single data buffer and all allocated memory
+ * @buf: the buffer to free
+ *
+ * This will free all of the pages allocated to the given data buffer, and
+ * then free the structure itself
+ */
+static void data_free_buffer(struct data_buf *buf)
+{
+	/* It is ok to free a NULL buffer */
+	if (!buf)
+		return;
+
+	/* free all memory */
+	videobuf_dma_free(&buf->vb);
+	kfree(buf);
+}
+
+/**
+ * data_alloc_buffer() - allocate and fill a data buffer with pages
+ * @bytes: the number of bytes required
+ *
+ * This allocates all space needed for a data buffer. It must be mapped before
+ * use in a DMA transaction using videobuf_dma_map().
+ *
+ * Returns NULL on failure
+ */
+static struct data_buf *data_alloc_buffer(const size_t bytes)
+{
+	unsigned int nr_pages;
+	struct data_buf *buf;
+	int ret;
+
+	/* calculate the number of pages necessary */
+	nr_pages = DIV_ROUND_UP(bytes, PAGE_SIZE);
+
+	/* allocate the buffer structure */
+	buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		goto out_return;
+
+	/* initialize internal fields */
+	INIT_LIST_HEAD(&buf->entry);
+	buf->size = bytes;
+
+	/* allocate the videobuf */
+	videobuf_dma_init(&buf->vb);
+	ret = videobuf_dma_init_kernel(&buf->vb, DMA_FROM_DEVICE, nr_pages);
+	if (ret)
+		goto out_free_buf;
+
+	return buf;
+
+out_free_buf:
+	kfree(buf);
+out_return:
+	return NULL;
+}
+
+/**
+ * data_free_buffers() - free all allocated buffers
+ * @priv: the driver's private data structure
+ *
+ * Free all buffers allocated by the driver (except those currently in the
+ * process of being read by userspace).
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user
+ */
+static void data_free_buffers(struct fpga_device *priv)
+{
+	struct data_buf *buf, *tmp;
+
+	/* the device should be stopped, no DMA in progress */
+	BUG_ON(priv->inflight != NULL);
+
+	list_for_each_entry_safe(buf, tmp, &priv->free, entry) {
+		list_del_init(&buf->entry);
+		videobuf_dma_unmap(priv->dev, &buf->vb);
+		data_free_buffer(buf);
+	}
+
+	list_for_each_entry_safe(buf, tmp, &priv->used, entry) {
+		list_del_init(&buf->entry);
+		videobuf_dma_unmap(priv->dev, &buf->vb);
+		data_free_buffer(buf);
+	}
+
+	priv->num_buffers = 0;
+	priv->bufsize = 0;
+}
+
+/**
+ * data_alloc_buffers() - allocate 1 seconds worth of data buffers
+ * @priv: the driver's private data structure
+ *
+ * Allocate enough buffers for a whole second worth of data
+ *
+ * This routine will attempt to degrade nicely by succeeding even if a full
+ * second worth of data buffers could not be allocated, as long as a minimum
+ * number were allocated. In this case, it will print a message to the kernel
+ * log.
+ *
+ * The device must not be modifying any lists when this is called.
+ *
+ * CONTEXT: user
+ * LOCKING: must hold dev->mutex
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_alloc_buffers(struct fpga_device *priv)
+{
+	struct data_buf *buf;
+	int i, ret;
+
+	for (i = 0; i < MAX_DATA_BUFS; i++) {
+
+		/* allocate a buffer */
+		buf = data_alloc_buffer(priv->bufsize);
+		if (!buf)
+			break;
+
+		/* map it for DMA */
+		ret = videobuf_dma_map(priv->dev, &buf->vb);
+		if (ret) {
+			data_free_buffer(buf);
+			break;
+		}
+
+		/* add it to the list of free buffers */
+		list_add_tail(&buf->entry, &priv->free);
+		priv->num_buffers++;
+	}
+
+	/* Make sure we allocated the minimum required number of buffers */
+	if (priv->num_buffers < MIN_DATA_BUFS) {
+		dev_err(priv->dev, "Unable to allocate enough data buffers\n");
+		data_free_buffers(priv);
+		return -ENOMEM;
+	}
+
+	/* Warn if we are running in a degraded state, but do not fail */
+	if (priv->num_buffers < MAX_DATA_BUFS) {
+		dev_warn(priv->dev,
+			 "Unable to allocate %d buffers, using %d buffers instead\n",
+			 MAX_DATA_BUFS, i);
+	}
+
+	return 0;
+}
+
+/*
+ * DMA Operations Helpers
+ */
+
+/**
+ * fpga_start_addr() - get the physical address a DATA-FPGA
+ * @priv: the driver's private data structure
+ * @fpga: the DATA-FPGA number (zero based)
+ */
+static dma_addr_t fpga_start_addr(struct fpga_device *priv, unsigned int fpga)
+{
+	return priv->phys_addr + 0x400000 + (0x80000 * fpga);
+}
+
+/**
+ * fpga_block_addr() - get the physical address of a correlation data block
+ * @priv: the driver's private data structure
+ * @fpga: the DATA-FPGA number (zero based)
+ * @blknum: the correlation block number (zero based)
+ */
+static dma_addr_t fpga_block_addr(struct fpga_device *priv, unsigned int fpga,
+				  unsigned int blknum)
+{
+	return fpga_start_addr(priv, fpga) + (0x10000 * (1 + blknum));
+}
+
+#define REG_BLOCK_SIZE	(32 * 4)
+
+/**
+ * data_setup_corl_table() - create the scatterlist for correlation dumps
+ * @priv: the driver's private data structure
+ *
+ * Create the scatterlist for transferring a correlation dump from the
+ * DATA FPGAs. This structure will be reused for each buffer than needs
+ * to be filled with correlation data.
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_setup_corl_table(struct fpga_device *priv)
+{
+	struct sg_table *table = &priv->corl_table;
+	struct scatterlist *sg;
+	struct fpga_info *info;
+	int i, j, ret;
+
+	/* Calculate the number of entries needed */
+	priv->corl_nents = (1 + NUM_FPGA) * REG_BLOCK_SIZE;
+	for (i = 0; i < NUM_FPGA; i++)
+		priv->corl_nents += priv->info[i].num_lag_ram;
+
+	/* Allocate the scatterlist table */
+	ret = sg_alloc_table(table, priv->corl_nents, GFP_KERNEL);
+	if (ret) {
+		dev_err(priv->dev, "unable to allocate DMA table\n");
+		return ret;
+	}
+
+	/* Add the DATA FPGA registers to the scatterlist */
+	sg = table->sgl;
+	for (i = 0; i < NUM_FPGA; i++) {
+		sg_dma_address(sg) = fpga_start_addr(priv, i);
+		sg_dma_len(sg) = REG_BLOCK_SIZE;
+		sg = sg_next(sg);
+	}
+
+	/* Add the SYS-FPGA registers to the scatterlist */
+	sg_dma_address(sg) = SYS_FPGA_BLOCK;
+	sg_dma_len(sg) = REG_BLOCK_SIZE;
+	sg = sg_next(sg);
+
+	/* Add the FPGA correlation data blocks to the scatterlist */
+	for (i = 0; i < NUM_FPGA; i++) {
+		info = &priv->info[i];
+		for (j = 0; j < info->num_lag_ram; j++) {
+			sg_dma_address(sg) = fpga_block_addr(priv, i, j);
+			sg_dma_len(sg) = info->blk_size;
+			sg = sg_next(sg);
+		}
+	}
+
+	/*
+	 * All physical addresses and lengths are present in the structure
+	 * now. It can be reused for every FPGA DATA interrupt
+	 */
+	return 0;
+}
+
+/*
+ * FPGA Register Access Helpers
+ */
+
+static void fpga_write_reg(struct fpga_device *priv, unsigned int fpga,
+			   unsigned int reg, u32 val)
+{
+	const int fpga_start = DATA_FPGA_START + (fpga * DATA_FPGA_SIZE);
+	iowrite32be(val, priv->regs + fpga_start + reg);
+}
+
+static u32 fpga_read_reg(struct fpga_device *priv, unsigned int fpga,
+			 unsigned int reg)
+{
+	const int fpga_start = DATA_FPGA_START + (fpga * DATA_FPGA_SIZE);
+	return ioread32be(priv->regs + fpga_start + reg);
+}
+
+/**
+ * data_calculate_bufsize() - calculate the data buffer size required
+ * @priv: the driver's private data structure
+ *
+ * Calculate the total buffer size needed to hold a single block
+ * of correlation data
+ *
+ * CONTEXT: user
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_calculate_bufsize(struct fpga_device *priv)
+{
+	u32 num_corl, num_lags, num_meta, num_qcnt, num_pack;
+	u32 conf1, conf2, version;
+	u32 num_lag_ram, blk_size;
+	int i;
+
+	/* Each buffer starts with the 5 FPGA register areas */
+	priv->bufsize = (1 + NUM_FPGA) * REG_BLOCK_SIZE;
+
+	/* Read and store the configuration data for each FPGA */
+	for (i = 0; i < NUM_FPGA; i++) {
+		version = fpga_read_reg(priv, i, MMAP_REG_VERSION);
+		conf1 = fpga_read_reg(priv, i, MMAP_REG_CORL_CONF1);
+		conf2 = fpga_read_reg(priv, i, MMAP_REG_CORL_CONF2);
+
+		/* minor version 2 and later */
+		if ((version & 0x000000FF) >= 2) {
+			num_corl = (conf1 & 0x000000F0) >> 4;
+			num_pack = (conf1 & 0x00000F00) >> 8;
+			num_lags = (conf1 & 0x00FFF000) >> 12;
+			num_meta = (conf1 & 0x7F000000) >> 24;
+			num_qcnt = (conf2 & 0x00000FFF) >> 0;
+		} else {
+			num_corl = (conf1 & 0x000000F0) >> 4;
+			num_pack = 1; /* implied */
+			num_lags = (conf1 & 0x000FFF00) >> 8;
+			num_meta = (conf1 & 0x7FF00000) >> 20;
+			num_qcnt = (conf2 & 0x00000FFF) >> 0;
+		}
+
+		num_lag_ram = (num_corl + num_pack - 1) / num_pack;
+		blk_size = ((num_pack * num_lags) + num_meta + num_qcnt) * 8;
+
+		priv->info[i].num_lag_ram = num_lag_ram;
+		priv->info[i].blk_size = blk_size;
+		priv->bufsize += num_lag_ram * blk_size;
+
+		dev_dbg(priv->dev, "FPGA %d NUM_CORL: %d\n", i, num_corl);
+		dev_dbg(priv->dev, "FPGA %d NUM_PACK: %d\n", i, num_pack);
+		dev_dbg(priv->dev, "FPGA %d NUM_LAGS: %d\n", i, num_lags);
+		dev_dbg(priv->dev, "FPGA %d NUM_META: %d\n", i, num_meta);
+		dev_dbg(priv->dev, "FPGA %d NUM_QCNT: %d\n", i, num_qcnt);
+		dev_dbg(priv->dev, "FPGA %d BLK_SIZE: %d\n", i, blk_size);
+	}
+
+	dev_dbg(priv->dev, "TOTAL BUFFER SIZE: %zu bytes\n", priv->bufsize);
+	return 0;
+}
+
+/*
+ * Interrupt Handling
+ */
+
+/**
+ * data_disable_interrupts() - stop the device from generating interrupts
+ * @priv: the driver's private data structure
+ *
+ * Hide interrupts by switching to GPIO interrupt source
+ *
+ * LOCKING: must hold dev->lock
+ */
+static void data_disable_interrupts(struct fpga_device *priv)
+{
+	/* hide the interrupt by switching the IRQ driver to GPIO */
+	iowrite32be(0x2F, priv->regs + SYS_IRQ_SOURCE_CTL);
+}
+
+/**
+ * data_enable_interrupts() - allow the device to generate interrupts
+ * @priv: the driver's private data structure
+ *
+ * Unhide interrupts by switching to the FPGA interrupt source. At the
+ * same time, clear the DATA-FPGA status registers.
+ *
+ * LOCKING: must hold dev->lock
+ */
+static void data_enable_interrupts(struct fpga_device *priv)
+{
+	/* clear the actual FPGA corl_done interrupt */
+	fpga_write_reg(priv, 0, MMAP_REG_STATUS, 0x0);
+	fpga_write_reg(priv, 1, MMAP_REG_STATUS, 0x0);
+	fpga_write_reg(priv, 2, MMAP_REG_STATUS, 0x0);
+	fpga_write_reg(priv, 3, MMAP_REG_STATUS, 0x0);
+
+	/* flush the writes */
+	fpga_read_reg(priv, 0, MMAP_REG_STATUS);
+
+	/* switch back to the external interrupt source */
+	iowrite32be(0x3F, priv->regs + SYS_IRQ_SOURCE_CTL);
+}
+
+/**
+ * data_dma_cb() - DMAEngine callback for DMA completion
+ * @data: the driver's private data structure
+ *
+ * Complete a DMA transfer from the DATA-FPGA's
+ *
+ * This is called via the DMA callback mechanism, and will handle moving the
+ * completed DMA transaction to the used list, and then wake any processes
+ * waiting for new data
+ *
+ * CONTEXT: any, softirq expected
+ */
+static void data_dma_cb(void *data)
+{
+	struct fpga_device *priv = data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* If there is no inflight buffer, we've got a bug */
+	BUG_ON(priv->inflight == NULL);
+
+	/* Move the inflight buffer onto the used list */
+	list_move_tail(&priv->inflight->entry, &priv->used);
+	priv->inflight = NULL;
+
+	/* clear the FPGA status and re-enable interrupts */
+	data_enable_interrupts(priv);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/*
+	 * We've changed both the inflight and used lists, so we need
+	 * to wake up any processes that are blocking for those events
+	 */
+	wake_up(&priv->wait);
+}
+
+/**
+ * data_submit_dma() - prepare and submit the required DMA to fill a buffer
+ * @priv: the driver's private data structure
+ * @buf: the data buffer
+ *
+ * Prepare and submit the necessary DMA transactions to fill a correlation
+ * data buffer.
+ *
+ * LOCKING: must hold dev->lock
+ * CONTEXT: hardirq only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_submit_dma(struct fpga_device *priv, struct data_buf *buf)
+{
+	struct scatterlist *dst_sg, *src_sg;
+	unsigned int dst_nents, src_nents;
+	struct dma_chan *chan = priv->chan;
+	struct dma_async_tx_descriptor *tx;
+	dma_cookie_t cookie;
+	dma_addr_t dst, src;
+
+	dst_sg = buf->vb.sglist;
+	dst_nents = buf->vb.sglen;
+
+	src_sg = priv->corl_table.sgl;
+	src_nents = priv->corl_nents;
+
+	/*
+	 * All buffers passed to this function should be ready and mapped
+	 * for DMA already. Therefore, we don't need to do anything except
+	 * submit it to the Freescale DMA Engine for processing
+	 */
+
+	/* setup the scatterlist to scatterlist transfer */
+	tx = chan->device->device_prep_dma_sg(chan,
+					      dst_sg, dst_nents,
+					      src_sg, src_nents,
+					      0);
+	if (!tx) {
+		dev_err(priv->dev, "unable to prep scatterlist DMA\n");
+		return -ENOMEM;
+	}
+
+	/* submit the transaction to the DMA controller */
+	cookie = tx->tx_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(priv->dev, "unable to submit scatterlist DMA\n");
+		return -ENOMEM;
+	}
+
+	/* Prepare the re-read of the SYS-FPGA block */
+	dst = sg_dma_address(dst_sg) + (NUM_FPGA * REG_BLOCK_SIZE);
+	src = SYS_FPGA_BLOCK;
+	tx = chan->device->device_prep_dma_memcpy(chan, dst, src,
+						  REG_BLOCK_SIZE,
+						  DMA_PREP_INTERRUPT);
+	if (!tx) {
+		dev_err(priv->dev, "unable to prep SYS-FPGA DMA\n");
+		return -ENOMEM;
+	}
+
+	/* Setup the callback */
+	tx->callback = data_dma_cb;
+	tx->callback_param = priv;
+
+	/* submit the transaction to the DMA controller */
+	cookie = tx->tx_submit(tx);
+	if (dma_submit_error(cookie)) {
+		dev_err(priv->dev, "unable to submit SYS-FPGA DMA\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+#define CORL_DONE	0x1
+#define CORL_ERR	0x2
+
+static irqreturn_t data_irq(int irq, void *dev_id)
+{
+	struct fpga_device *priv = dev_id;
+	bool submitted = false;
+	struct data_buf *buf;
+	u32 status;
+	int i;
+
+	/* detect spurious interrupts via FPGA status */
+	for (i = 0; i < 4; i++) {
+		status = fpga_read_reg(priv, i, MMAP_REG_STATUS);
+		if (!(status & (CORL_DONE | CORL_ERR))) {
+			dev_err(priv->dev, "spurious irq detected (FPGA)\n");
+			return IRQ_NONE;
+		}
+	}
+
+	/* detect spurious interrupts via raw IRQ pin readback */
+	status = ioread32be(priv->regs + SYS_IRQ_INPUT_DATA);
+	if (status & IRQ_CORL_DONE) {
+		dev_err(priv->dev, "spurious irq detected (IRQ)\n");
+		return IRQ_NONE;
+	}
+
+	spin_lock(&priv->lock);
+
+	/* hide the interrupt by switching the IRQ driver to GPIO */
+	data_disable_interrupts(priv);
+
+	/* If there are no free buffers, drop this data */
+	if (list_empty(&priv->free)) {
+		priv->num_dropped++;
+		goto out;
+	}
+
+	buf = list_first_entry(&priv->free, struct data_buf, entry);
+	list_del_init(&buf->entry);
+	BUG_ON(buf->size != priv->bufsize);
+
+	/* Submit a DMA transfer to get the correlation data */
+	if (data_submit_dma(priv, buf)) {
+		dev_err(priv->dev, "Unable to setup DMA transfer\n");
+		list_move_tail(&buf->entry, &priv->free);
+		goto out;
+	}
+
+	/* Save the buffer for the DMA callback */
+	priv->inflight = buf;
+	submitted = true;
+
+	/* Start the DMA Engine */
+	dma_async_memcpy_issue_pending(priv->chan);
+
+out:
+	/* If no DMA was submitted, re-enable interrupts */
+	if (!submitted)
+		data_enable_interrupts(priv);
+
+	spin_unlock(&priv->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Realtime Device Enable Helpers
+ */
+
+/**
+ * data_device_enable() - enable the device for buffered dumping
+ * @priv: the driver's private data structure
+ *
+ * Enable the device for buffered dumping. Allocates buffers and hooks up
+ * the interrupt handler. When this finishes, data will come pouring in.
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user context only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_device_enable(struct fpga_device *priv)
+{
+	u32 val;
+	int ret;
+
+	/* multiple enables are safe: they do nothing */
+	if (priv->enabled)
+		return 0;
+
+	/* check that the FPGAs are programmed */
+	val = ioread32be(priv->regs + SYS_FPGA_CONFIG_STATUS);
+	if (!(val & (1 << 18))) {
+		dev_err(priv->dev, "DATA-FPGAs are not enabled\n");
+		return -ENODATA;
+	}
+
+	/* read the FPGAs to calculate the buffer size */
+	ret = data_calculate_bufsize(priv);
+	if (ret) {
+		dev_err(priv->dev, "unable to calculate buffer size\n");
+		goto out_error;
+	}
+
+	/* allocate the correlation data buffers */
+	ret = data_alloc_buffers(priv);
+	if (ret) {
+		dev_err(priv->dev, "unable to allocate buffers\n");
+		goto out_error;
+	}
+
+	/* setup the source scatterlist for dumping correlation data */
+	ret = data_setup_corl_table(priv);
+	if (ret) {
+		dev_err(priv->dev, "unable to setup correlation DMA table\n");
+		goto out_error;
+	}
+
+	/* hookup the irq handler */
+	ret = request_irq(priv->irq, data_irq, IRQF_SHARED, drv_name, priv);
+	if (ret) {
+		dev_err(priv->dev, "unable to request IRQ handler\n");
+		goto out_error;
+	}
+
+	/* switch to the external FPGA IRQ line */
+	data_enable_interrupts(priv);
+
+	/* success, we're enabled */
+	priv->enabled = true;
+	return 0;
+
+out_error:
+	sg_free_table(&priv->corl_table);
+	priv->corl_nents = 0;
+
+	data_free_buffers(priv);
+	return ret;
+}
+
+/**
+ * data_device_disable() - disable the device for buffered dumping
+ * @priv: the driver's private data structure
+ *
+ * Disable the device for buffered dumping. Stops new DMA transactions from
+ * being generated, waits for all outstanding DMA to complete, and then frees
+ * all buffers.
+ *
+ * LOCKING: must hold dev->mutex
+ * CONTEXT: user only
+ *
+ * Returns 0 on success, -ERRNO otherwise
+ */
+static int data_device_disable(struct fpga_device *priv)
+{
+	int ret;
+
+	/* allow multiple disable */
+	if (!priv->enabled)
+		return 0;
+
+	/* switch to the internal GPIO IRQ line */
+	data_disable_interrupts(priv);
+
+	/* unhook the irq handler */
+	free_irq(priv->irq, priv);
+
+	/*
+	 * wait for all outstanding DMA to complete
+	 *
+	 * Device interrupts are disabled, therefore another buffer cannot
+	 * be marked inflight.
+	 */
+	ret = wait_event_interruptible(priv->wait, priv->inflight == NULL);
+	if (ret)
+		return ret;
+
+	/* free the correlation table */
+	sg_free_table(&priv->corl_table);
+	priv->corl_nents = 0;
+
+	/*
+	 * We are taking the spinlock not to protect priv->enabled, but instead
+	 * to make sure that there are no readers in the process of altering
+	 * the free or used lists while we are setting this flag.
+	 */
+	spin_lock_irq(&priv->lock);
+	priv->enabled = false;
+	spin_unlock_irq(&priv->lock);
+
+	/* free all buffers: the free and used lists are not being changed */
+	data_free_buffers(priv);
+	return 0;
+}
+
+/*
+ * DEBUGFS Interface
+ */
+#ifdef CONFIG_DEBUG_FS
+
+/*
+ * Count the number of entries in the given list
+ */
+static unsigned int list_num_entries(struct list_head *list)
+{
+	struct list_head *entry;
+	unsigned int ret = 0;
+
+	list_for_each(entry, list)
+		ret++;
+
+	return ret;
+}
+
+static int data_debug_show(struct seq_file *f, void *offset)
+{
+	struct fpga_device *priv = f->private;
+	int ret;
+
+	/*
+	 * Lock the mutex first, so that we get an accurate value for enable
+	 * Lock the spinlock next, to get accurate list counts
+	 */
+	ret = mutex_lock_interruptible(&priv->mutex);
+	if (ret)
+		return ret;
+
+	spin_lock_irq(&priv->lock);
+
+	seq_printf(f, "enabled: %d\n", priv->enabled);
+	seq_printf(f, "bufsize: %d\n", priv->bufsize);
+	seq_printf(f, "num_buffers: %d\n", priv->num_buffers);
+	seq_printf(f, "num_free: %d\n", list_num_entries(&priv->free));
+	seq_printf(f, "inflight: %d\n", priv->inflight != NULL);
+	seq_printf(f, "num_used: %d\n", list_num_entries(&priv->used));
+	seq_printf(f, "num_dropped: %d\n", priv->num_dropped);
+
+	spin_unlock_irq(&priv->lock);
+	mutex_unlock(&priv->mutex);
+	return 0;
+}
+
+static int data_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, data_debug_show, inode->i_private);
+}
+
+static const struct file_operations data_debug_fops = {
+	.owner		= THIS_MODULE,
+	.open		= data_debug_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int data_debugfs_init(struct fpga_device *priv)
+{
+	priv->dbg_entry = debugfs_create_file(drv_name, S_IRUGO, NULL, priv,
+					      &data_debug_fops);
+	if (IS_ERR(priv->dbg_entry))
+		return PTR_ERR(priv->dbg_entry);
+
+	return 0;
+}
+
+static void data_debugfs_exit(struct fpga_device *priv)
+{
+	debugfs_remove(priv->dbg_entry);
+}
+
+#else
+
+static inline int data_debugfs_init(struct fpga_device *priv)
+{
+	return 0;
+}
+
+static inline void data_debugfs_exit(struct fpga_device *priv)
+{
+}
+
+#endif	/* CONFIG_DEBUG_FS */
+
+/*
+ * SYSFS Attributes
+ */
+
+static ssize_t data_en_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct fpga_device *priv = dev_get_drvdata(dev);
+	return snprintf(buf, PAGE_SIZE, "%u\n", priv->enabled);
+}
+
+static ssize_t data_en_set(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct fpga_device *priv = dev_get_drvdata(dev);
+	unsigned long enable;
+	int ret;
+
+	ret = strict_strtoul(buf, 0, &enable);
+	if (ret) {
+		dev_err(priv->dev, "unable to parse enable input\n");
+		return -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&priv->mutex);
+	if (ret)
+		return ret;
+
+	if (enable)
+		ret = data_device_enable(priv);
+	else
+		ret = data_device_disable(priv);
+
+	if (ret) {
+		dev_err(priv->dev, "device %s failed\n",
+			enable ? "enable" : "disable");
+		count = ret;
+		goto out_unlock;
+	}
+
+out_unlock:
+	mutex_unlock(&priv->mutex);
+	return count;
+}
+
+static DEVICE_ATTR(enable, S_IWUSR | S_IRUGO, data_en_show, data_en_set);
+
+static struct attribute *data_sysfs_attrs[] = {
+	&dev_attr_enable.attr,
+	NULL,
+};
+
+static const struct attribute_group rt_sysfs_attr_group = {
+	.attrs = data_sysfs_attrs,
+};
+
+/*
+ * FPGA Realtime Data Character Device
+ */
+
+static int data_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * The miscdevice layer puts our struct miscdevice into the
+	 * filp->private_data field. We use this to find our private
+	 * data and then overwrite it with our own private structure.
+	 */
+	struct fpga_device *priv = container_of(filp->private_data,
+						struct fpga_device, miscdev);
+	struct fpga_reader *reader;
+	int ret;
+
+	/* allocate private data */
+	reader = kzalloc(sizeof(*reader), GFP_KERNEL);
+	if (!reader)
+		return -ENOMEM;
+
+	reader->priv = priv;
+	reader->buf = NULL;
+
+	filp->private_data = reader;
+	ret = nonseekable_open(inode, filp);
+	if (ret) {
+		dev_err(priv->dev, "nonseekable-open failed\n");
+		kfree(reader);
+		return ret;
+	}
+
+	/*
+	 * success, increase the reference count of the private data structure
+	 * so that it doesn't disappear if the device is unbound
+	 */
+	kref_get(&priv->ref);
+	return 0;
+}
+
+static int data_release(struct inode *inode, struct file *filp)
+{
+	struct fpga_reader *reader = filp->private_data;
+	struct fpga_device *priv = reader->priv;
+
+	/* free the per-reader structure */
+	data_free_buffer(reader->buf);
+	kfree(reader);
+	filp->private_data = NULL;
+
+	/* decrement our reference count to the private data */
+	kref_put(&priv->ref, fpga_device_release);
+	return 0;
+}
+
+static ssize_t data_read(struct file *filp, char __user *ubuf, size_t count,
+			 loff_t *f_pos)
+{
+	struct fpga_reader *reader = filp->private_data;
+	struct fpga_device *priv = reader->priv;
+	struct list_head *used = &priv->used;
+	struct data_buf *dbuf;
+	size_t avail;
+	void *data;
+	int ret;
+
+	/* check if we already have a partial buffer */
+	if (reader->buf) {
+		dbuf = reader->buf;
+		goto have_buffer;
+	}
+
+	spin_lock_irq(&priv->lock);
+
+	/* Block until there is at least one buffer on the used list */
+	while (list_empty(used)) {
+		spin_unlock_irq(&priv->lock);
+
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		ret = wait_event_interruptible(priv->wait, !list_empty(used));
+		if (ret)
+			return ret;
+
+		spin_lock_irq(&priv->lock);
+	}
+
+	/* Grab the first buffer off of the used list */
+	dbuf = list_first_entry(used, struct data_buf, entry);
+	list_del_init(&dbuf->entry);
+
+	spin_unlock_irq(&priv->lock);
+
+	/* Buffers are always mapped: unmap it */
+	videobuf_dma_unmap(priv->dev, &dbuf->vb);
+
+	/* save the buffer for later */
+	reader->buf = dbuf;
+	reader->buf_start = 0;
+
+have_buffer:
+	/* Get the number of bytes available */
+	avail = dbuf->size - reader->buf_start;
+	data = dbuf->vb.vaddr + reader->buf_start;
+
+	/* Get the number of bytes we can transfer */
+	count = min(count, avail);
+
+	/* Copy the data to the userspace buffer */
+	if (copy_to_user(ubuf, data, count))
+		return -EFAULT;
+
+	/* Update the amount of available space */
+	avail -= count;
+
+	/*
+	 * If there is still some data available, save the buffer for the
+	 * next userspace call to read() and return
+	 */
+	if (avail > 0) {
+		reader->buf_start += count;
+		reader->buf = dbuf;
+		return count;
+	}
+
+	/*
+	 * Get the buffer ready to be reused for DMA
+	 *
+	 * If it fails, we pretend that the read never happed and return
+	 * -EFAULT to userspace. The read will be retried.
+	 */
+	ret = videobuf_dma_map(priv->dev, &dbuf->vb);
+	if (ret) {
+		dev_err(priv->dev, "unable to remap buffer for DMA\n");
+		return -EFAULT;
+	}
+
+	/* Lock against concurrent enable/disable */
+	spin_lock_irq(&priv->lock);
+
+	/* the reader is finished with this buffer */
+	reader->buf = NULL;
+
+	/*
+	 * One of two things has happened, the device is disabled, or the
+	 * device has been reconfigured underneath us. In either case, we
+	 * should just throw away the buffer.
+	 */
+	if (!priv->enabled || dbuf->size != priv->bufsize) {
+		videobuf_dma_unmap(priv->dev, &dbuf->vb);
+		data_free_buffer(dbuf);
+		goto out_unlock;
+	}
+
+	/* The buffer is safe to reuse, so add it back to the free list */
+	list_add_tail(&dbuf->entry, &priv->free);
+
+out_unlock:
+	spin_unlock_irq(&priv->lock);
+	return count;
+}
+
+static unsigned int data_poll(struct file *filp, struct poll_table_struct *tbl)
+{
+	struct fpga_reader *reader = filp->private_data;
+	struct fpga_device *priv = reader->priv;
+	unsigned int mask = 0;
+
+	poll_wait(filp, &priv->wait, tbl);
+
+	if (!list_empty(&priv->used))
+		mask |= POLLIN | POLLRDNORM;
+
+	return mask;
+}
+
+static int data_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct fpga_reader *reader = filp->private_data;
+	struct fpga_device *priv = reader->priv;
+	unsigned long offset, vsize, psize, addr;
+
+	/* VMA properties */
+	offset = vma->vm_pgoff << PAGE_SHIFT;
+	vsize = vma->vm_end - vma->vm_start;
+	psize = priv->phys_size - offset;
+	addr = (priv->phys_addr + offset) >> PAGE_SHIFT;
+
+	/* Check against the FPGA region's physical memory size */
+	if (vsize > psize) {
+		dev_err(priv->dev, "requested mmap mapping too large\n");
+		return -EINVAL;
+	}
+
+	/* IO memory (stop cacheing) */
+	vma->vm_flags |= VM_IO | VM_RESERVED;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	return io_remap_pfn_range(vma, vma->vm_start, addr, vsize,
+				  vma->vm_page_prot);
+}
+
+static const struct file_operations data_fops = {
+	.owner		= THIS_MODULE,
+	.open		= data_open,
+	.release	= data_release,
+	.read		= data_read,
+	.poll		= data_poll,
+	.mmap		= data_mmap,
+	.llseek		= no_llseek,
+};
+
+/*
+ * OpenFirmware Device Subsystem
+ */
+
+static bool dma_filter(struct dma_chan *chan, void *data)
+{
+	/*
+	 * DMA Channel #0 is used for the FPGA Programmer, so ignore it
+	 *
+	 * This probably won't survive an unload/load cycle of the Freescale
+	 * DMAEngine driver, but that won't be a problem
+	 */
+	if (chan->chan_id == 0 && chan->device->dev_id == 0)
+		return false;
+
+	return true;
+}
+
+static int data_of_probe(struct platform_device *op,
+			 const struct of_device_id *match)
+{
+	struct device_node *of_node = op->dev.of_node;
+	struct device *this_device;
+	struct fpga_device *priv;
+	struct resource res;
+	dma_cap_mask_t mask;
+	int ret;
+
+	/* Allocate private data */
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&op->dev, "Unable to allocate device private data\n");
+		ret = -ENOMEM;
+		goto out_return;
+	}
+
+	dev_set_drvdata(&op->dev, priv);
+	priv->dev = &op->dev;
+	kref_init(&priv->ref);
+	mutex_init(&priv->mutex);
+
+	dev_set_drvdata(priv->dev, priv);
+	spin_lock_init(&priv->lock);
+	INIT_LIST_HEAD(&priv->free);
+	INIT_LIST_HEAD(&priv->used);
+	init_waitqueue_head(&priv->wait);
+
+	/* Setup the misc device */
+	priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+	priv->miscdev.name = drv_name;
+	priv->miscdev.fops = &data_fops;
+
+	/* Get the physical address of the FPGA registers */
+	ret = of_address_to_resource(of_node, 0, &res);
+	if (ret) {
+		dev_err(&op->dev, "Unable to find FPGA physical address\n");
+		ret = -ENODEV;
+		goto out_free_priv;
+	}
+
+	priv->phys_addr = res.start;
+	priv->phys_size = resource_size(&res);
+
+	/* ioremap the registers for use */
+	priv->regs = of_iomap(of_node, 0);
+	if (!priv->regs) {
+		dev_err(&op->dev, "Unable to ioremap registers\n");
+		ret = -ENOMEM;
+		goto out_free_priv;
+	}
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_MEMCPY, mask);
+	dma_cap_set(DMA_INTERRUPT, mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_cap_set(DMA_SG, mask);
+
+	/* Request a DMA channel */
+	priv->chan = dma_request_channel(mask, dma_filter, NULL);
+	if (!priv->chan) {
+		dev_err(&op->dev, "Unable to request DMA channel\n");
+		ret = -ENODEV;
+		goto out_unmap_regs;
+	}
+
+	/* Find the correct IRQ number */
+	priv->irq = irq_of_parse_and_map(of_node, 0);
+	if (priv->irq == NO_IRQ) {
+		dev_err(&op->dev, "Unable to find IRQ line\n");
+		ret = -ENODEV;
+		goto out_release_dma;
+	}
+
+	/* Drive the GPIO for FPGA IRQ high (no interrupt) */
+	iowrite32be(IRQ_CORL_DONE, priv->regs + SYS_IRQ_OUTPUT_DATA);
+
+	/* Register the miscdevice */
+	ret = misc_register(&priv->miscdev);
+	if (ret) {
+		dev_err(&op->dev, "Unable to register miscdevice\n");
+		goto out_irq_dispose_mapping;
+	}
+
+	/* Create the debugfs files */
+	ret = data_debugfs_init(priv);
+	if (ret) {
+		dev_err(&op->dev, "Unable to create debugfs files\n");
+		goto out_misc_deregister;
+	}
+
+	/* Create the sysfs files */
+	this_device = priv->miscdev.this_device;
+	dev_set_drvdata(this_device, priv);
+	ret = sysfs_create_group(&this_device->kobj, &rt_sysfs_attr_group);
+	if (ret) {
+		dev_err(&op->dev, "Unable to create sysfs files\n");
+		goto out_data_debugfs_exit;
+	}
+
+	dev_info(&op->dev, "CARMA FPGA Realtime Data Driver Loaded\n");
+	return 0;
+
+out_data_debugfs_exit:
+	data_debugfs_exit(priv);
+out_misc_deregister:
+	misc_deregister(&priv->miscdev);
+out_irq_dispose_mapping:
+	irq_dispose_mapping(priv->irq);
+out_release_dma:
+	dma_release_channel(priv->chan);
+out_unmap_regs:
+	iounmap(priv->regs);
+out_free_priv:
+	kref_put(&priv->ref, fpga_device_release);
+out_return:
+	return ret;
+}
+
+static int data_of_remove(struct platform_device *op)
+{
+	struct fpga_device *priv = dev_get_drvdata(&op->dev);
+	struct device *this_device = priv->miscdev.this_device;
+
+	/* remove all sysfs files, now the device cannot be re-enabled */
+	sysfs_remove_group(&this_device->kobj, &rt_sysfs_attr_group);
+
+	/* remove all debugfs files */
+	data_debugfs_exit(priv);
+
+	/* disable the device from generating data */
+	data_device_disable(priv);
+
+	/* remove the character device to stop new readers from appearing */
+	misc_deregister(&priv->miscdev);
+
+	/* cleanup everything not needed by readers */
+	irq_dispose_mapping(priv->irq);
+	dma_release_channel(priv->chan);
+	iounmap(priv->regs);
+
+	/* release our reference */
+	kref_put(&priv->ref, fpga_device_release);
+	return 0;
+}
+
+static struct of_device_id data_of_match[] = {
+	{ .compatible = "carma,carma-fpga", },
+	{},
+};
+
+static struct of_platform_driver data_of_driver = {
+	.probe		= data_of_probe,
+	.remove		= data_of_remove,
+	.driver		= {
+		.name		= drv_name,
+		.of_match_table	= data_of_match,
+		.owner		= THIS_MODULE,
+	},
+};
+
+/*
+ * Module Init / Exit
+ */
+
+static int __init data_init(void)
+{
+	return of_register_platform_driver(&data_of_driver);
+}
+
+static void __exit data_exit(void)
+{
+	of_unregister_platform_driver(&data_of_driver);
+}
+
+MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
+MODULE_DESCRIPTION("CARMA DATA-FPGA Access Driver");
+MODULE_LICENSE("GPL");
+
+module_init(data_init);
+module_exit(data_exit);