Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 23 insertions, 24 deletions

diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h
index 0c773866efc7..b0588acbb47d 100644
--- a/drivers/isdn/hardware/mISDN/hfc_multi.h
+++ b/drivers/isdn/hardware/mISDN/hfc_multi.h
@@ -33,13 +33,13 @@
  */
 
 /*
-#define MAX_FRAME_SIZE	2048
+  #define MAX_FRAME_SIZE	2048
 */
 
 struct hfc_chan {
 	struct dchannel	*dch;	/* link if channel is a D-channel */
 	struct bchannel	*bch;	/* link if channel is a B-channel */
-	int		port; 	/* the interface port this */
+	int		port;	/* the interface port this */
 				/* channel is associated with */
 	int		nt_timer; /* -1 if off, 0 if elapsed, >0 if running */
 	int		los, ais, slip_tx, slip_rx, rdi; /* current alarms */
@@ -89,7 +89,7 @@ struct hfcm_hw {
 #define	HFC_CFG_REPORT_RDI	8 /* the card should report remote alarm */
 #define	HFC_CFG_DTMF		9 /* enable DTMF-detection */
 #define	HFC_CFG_CRC4		10 /* disable CRC-4 Multiframe mode, */
-					/* use double frame instead. */
+/* use double frame instead. */
 
 #define HFC_TYPE_E1		1 /* controller is HFC-E1 */
 #define HFC_TYPE_4S		4 /* controller is HFC-4S */
@@ -109,9 +109,9 @@ struct hfcm_hw {
 #define	HFC_CHIP_E1CLOCK_GET	10 /* always get clock from E1 interface */
 #define	HFC_CHIP_E1CLOCK_PUT	11 /* always put clock from E1 interface */
 #define	HFC_CHIP_WATCHDOG	12 /* whether we should send signals */
-					/* to the watchdog */
+/* to the watchdog */
 #define	HFC_CHIP_B410P		13 /* whether we have a b410p with echocan in */
-					/* hw */
+/* hw */
 #define	HFC_CHIP_PLXSD		14 /* whether we have a Speech-Design PLX */
 #define	HFC_CHIP_EMBSD          15 /* whether we have a SD Embedded board */
 
@@ -148,26 +148,26 @@ struct hfc_multi {
 	int		io_mode; /* selects mode */
 #ifdef HFC_REGISTER_DEBUG
 	void		(*HFC_outb)(struct hfc_multi *hc, u_char reg,
-				u_char val, const char *function, int line);
+				    u_char val, const char *function, int line);
 	void		(*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
-				u_char val, const char *function, int line);
+					    u_char val, const char *function, int line);
 	u_char		(*HFC_inb)(struct hfc_multi *hc, u_char reg,
-				const char *function, int line);
+				   const char *function, int line);
 	u_char		(*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg,
-				const char *function, int line);
+					   const char *function, int line);
 	u_short		(*HFC_inw)(struct hfc_multi *hc, u_char reg,
-				const char *function, int line);
+				   const char *function, int line);
 	u_short		(*HFC_inw_nodebug)(struct hfc_multi *hc, u_char reg,
-				const char *function, int line);
+					   const char *function, int line);
 	void		(*HFC_wait)(struct hfc_multi *hc,
-				const char *function, int line);
+				    const char *function, int line);
 	void		(*HFC_wait_nodebug)(struct hfc_multi *hc,
-				const char *function, int line);
+					    const char *function, int line);
 #else
 	void		(*HFC_outb)(struct hfc_multi *hc, u_char reg,
-				u_char val);
+				    u_char val);
 	void		(*HFC_outb_nodebug)(struct hfc_multi *hc, u_char reg,
-				u_char val);
+					    u_char val);
 	u_char		(*HFC_inb)(struct hfc_multi *hc, u_char reg);
 	u_char		(*HFC_inb_nodebug)(struct hfc_multi *hc, u_char reg);
 	u_short		(*HFC_inw)(struct hfc_multi *hc, u_char reg);
@@ -176,9 +176,9 @@ struct hfc_multi {
 	void		(*HFC_wait_nodebug)(struct hfc_multi *hc);
 #endif
 	void		(*read_fifo)(struct hfc_multi *hc, u_char *data,
-				int len);
+				     int len);
 	void		(*write_fifo)(struct hfc_multi *hc, u_char *data,
-				int len);
+				      int len);
 	u_long		pci_origmembase, plx_origmembase;
 	void __iomem	*pci_membase; /* PCI memory */
 	void __iomem	*plx_membase; /* PLX memory */
@@ -211,10 +211,10 @@ struct hfc_multi {
 					/* an optical Interface */
 	int		dslot;	/* channel # of d-channel (E1) default 16 */
 
-	u_long		wdcount; 	/* every 500 ms we need to */
+	u_long		wdcount;	/* every 500 ms we need to */
 					/* send the watchdog a signal */
 	u_char		wdbyte; /* watchdog toggle byte */
-	u_int		activity[8]; 	/* if there is any action on this */
+	u_int		activity[8];	/* if there is any action on this */
 					/* port (will be cleared after */
 					/* showing led-states) */
 	int		e1_state; /* keep track of last state */
@@ -268,7 +268,7 @@ struct hfc_multi {
 #define PLX_DSP_RES_N		PLX_GPIO8
 /* GPIO4..8 Enable & Set to OUT, SLAVE_EN_N = 1 */
 #define PLX_GPIOC_INIT		(PLX_GPIO4_DIR | PLX_GPIO5_DIR | PLX_GPIO6_DIR \
-			| PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
+				 | PLX_GPIO7_DIR | PLX_GPIO8_DIR | PLX_SLAVE_EN_N)
 
 /* PLX Interrupt Control/STATUS */
 #define PLX_INTCSR_LINTI1_ENABLE 0x01
@@ -290,7 +290,7 @@ struct hfc_multi {
 /* write only registers */
 #define R_CIRM			0x00
 #define R_CTRL			0x01
-#define R_BRG_PCM_CFG 		0x02
+#define R_BRG_PCM_CFG		0x02
 #define R_RAM_ADDR0		0x08
 #define R_RAM_ADDR1		0x09
 #define R_RAM_ADDR2		0x0A
@@ -687,8 +687,8 @@ struct hfc_multi {
 #define V_NEG_CLK		0x08
 #define V_HCLK			0x10
 /*
-#define V_JATT_AUTO_DEL		0x20
-#define V_JATT_AUTO		0x40
+  #define V_JATT_AUTO_DEL		0x20
+  #define V_JATT_AUTO		0x40
 */
 #define V_JATT_OFF		0x80
 /* R_STATE */
@@ -1230,4 +1230,3 @@ struct hfc_register_names {
 	{"R_IRQ_FIFO_BL7",	0xCF},
 };
 #endif /* HFC_REGISTER_DEBUG */
-