iommu/vt-d: Ratelimit each dmar fault printing

There is a ratelimit for printing, but it's incremented each time the
cpu recives dmar fault interrupt. While one interrupt may signal about
*many* faults.
So, measuring the impact it turns out that reading/clearing one fault
takes < 1 usec, and printing info about the fault takes ~170 msec.

Having in mind that maximum number of fault recording registers per
remapping hardware unit is 256.. IRQ handler may run for (170*256) msec.
And as fault-serving loop runs without a time limit, during servicing
new faults may occur..

Ratelimit each fault printing rather than each irq printing.

Fixes: commit c43fce4eebae ("iommu/vt-d: Ratelimit fault handler")

BUG: spinlock lockup suspected on CPU#0, CliShell/9903
 lock: 0xffffffff81a47440, .magic: dead4ead, .owner: kworker/u16:2/8915, .owner_cpu: 6
CPU: 0 PID: 9903 Comm: CliShell
Call Trace:$\n'
[..] dump_stack+0x65/0x83$\n'
[..] spin_dump+0x8f/0x94$\n'
[..] do_raw_spin_lock+0x123/0x170$\n'
[..] _raw_spin_lock_irqsave+0x32/0x3a$\n'
[..] uart_chars_in_buffer+0x20/0x4d$\n'
[..] tty_chars_in_buffer+0x18/0x1d$\n'
[..] n_tty_poll+0x1cb/0x1f2$\n'
[..] tty_poll+0x5e/0x76$\n'
[..] do_select+0x363/0x629$\n'
[..] compat_core_sys_select+0x19e/0x239$\n'
[..] compat_SyS_select+0x98/0xc0$\n'
[..] sysenter_dispatch+0x7/0x25$\n'
[..]
NMI backtrace for cpu 6
CPU: 6 PID: 8915 Comm: kworker/u16:2
Workqueue: dmar_fault dmar_fault_work
Call Trace:$\n'
[..] wait_for_xmitr+0x26/0x8f$\n'
[..] serial8250_console_putchar+0x1c/0x2c$\n'
[..] uart_console_write+0x40/0x4b$\n'
[..] serial8250_console_write+0xe6/0x13f$\n'
[..] call_console_drivers.constprop.13+0xce/0x103$\n'
[..] console_unlock+0x1f8/0x39b$\n'
[..] vprintk_emit+0x39e/0x3e6$\n'
[..] printk+0x4d/0x4f$\n'
[..] dmar_fault+0x1a8/0x1fc$\n'
[..] dmar_fault_work+0x15/0x17$\n'
[..] process_one_work+0x1e8/0x3a9$\n'
[..] worker_thread+0x25d/0x345$\n'
[..] kthread+0xea/0xf2$\n'
[..] ret_from_fork+0x58/0x90$\n'

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

1 files changed, 3 insertions, 5 deletions

diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index accf58388bdb..6c4ea32ee6a9 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1618,17 +1618,13 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
 	int reg, fault_index;
 	u32 fault_status;
 	unsigned long flag;
-	bool ratelimited;
 	static DEFINE_RATELIMIT_STATE(rs,
 				      DEFAULT_RATELIMIT_INTERVAL,
 				      DEFAULT_RATELIMIT_BURST);
 
-	/* Disable printing, simply clear the fault when ratelimited */
-	ratelimited = !__ratelimit(&rs);
-
 	raw_spin_lock_irqsave(&iommu->register_lock, flag);
 	fault_status = readl(iommu->reg + DMAR_FSTS_REG);
-	if (fault_status && !ratelimited)
+	if (fault_status && __ratelimit(&rs))
 		pr_err("DRHD: handling fault status reg %x\n", fault_status);
 
 	/* TBD: ignore advanced fault log currently */
@@ -1638,6 +1634,8 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
 	fault_index = dma_fsts_fault_record_index(fault_status);
 	reg = cap_fault_reg_offset(iommu->cap);
 	while (1) {
+		/* Disable printing, simply clear the fault when ratelimited */
+		bool ratelimited = !__ratelimit(&rs);
 		u8 fault_reason;
 		u16 source_id;
 		u64 guest_addr;