Merge airlied/drm-next into drm-misc-next

Bake in the conflict between the drm_print.h extraction and the
addition of DRM_DEBUG_LEASES since we lost it a few too many times.

Also fix a new use of drm_plane_helper_check_state in msm to follow
Ville's conversion in

commit a01cb8ba3f6282934cff65e89ab36b18b14cbe27
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Wed Nov 1 22:16:19 2017 +0200

    drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c

Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 44 insertions, 23 deletions

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 32d2762448aa..b3bbad7d2282 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -72,6 +72,9 @@ struct goodix_ts_data {
 #define GOODIX_REG_CONFIG_DATA		0x8047
 #define GOODIX_REG_ID			0x8140
 
+#define GOODIX_BUFFER_STATUS_READY	BIT(7)
+#define GOODIX_BUFFER_STATUS_TIMEOUT	20
+
 #define RESOLUTION_LOC		1
 #define MAX_CONTACTS_LOC	5
 #define TRIGGER_LOC		6
@@ -195,35 +198,53 @@ static int goodix_get_cfg_len(u16 id)
 
 static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 {
+	unsigned long max_timeout;
 	int touch_num;
 	int error;
 
-	error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, data,
-				GOODIX_CONTACT_SIZE + 1);
-	if (error) {
-		dev_err(&ts->client->dev, "I2C transfer error: %d\n", error);
-		return error;
-	}
+	/*
+	 * The 'buffer status' bit, which indicates that the data is valid, is
+	 * not set as soon as the interrupt is raised, but slightly after.
+	 * This takes around 10 ms to happen, so we poll for 20 ms.
+	 */
+	max_timeout = jiffies + msecs_to_jiffies(GOODIX_BUFFER_STATUS_TIMEOUT);
+	do {
+		error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR,
+					data, GOODIX_CONTACT_SIZE + 1);
+		if (error) {
+			dev_err(&ts->client->dev, "I2C transfer error: %d\n",
+					error);
+			return error;
+		}
 
-	if (!(data[0] & 0x80))
-		return -EAGAIN;
+		if (data[0] & GOODIX_BUFFER_STATUS_READY) {
+			touch_num = data[0] & 0x0f;
+			if (touch_num > ts->max_touch_num)
+				return -EPROTO;
+
+			if (touch_num > 1) {
+				data += 1 + GOODIX_CONTACT_SIZE;
+				error = goodix_i2c_read(ts->client,
+						GOODIX_READ_COOR_ADDR +
+							1 + GOODIX_CONTACT_SIZE,
+						data,
+						GOODIX_CONTACT_SIZE *
+							(touch_num - 1));
+				if (error)
+					return error;
+			}
+
+			return touch_num;
+		}
 
-	touch_num = data[0] & 0x0f;
-	if (touch_num > ts->max_touch_num)
-		return -EPROTO;
-
-	if (touch_num > 1) {
-		data += 1 + GOODIX_CONTACT_SIZE;
-		error = goodix_i2c_read(ts->client,
-					GOODIX_READ_COOR_ADDR +
-						1 + GOODIX_CONTACT_SIZE,
-					data,
-					GOODIX_CONTACT_SIZE * (touch_num - 1));
-		if (error)
-			return error;
-	}
+		usleep_range(1000, 2000); /* Poll every 1 - 2 ms */
+	} while (time_before(jiffies, max_timeout));
 
-	return touch_num;
+	/*
+	 * The Goodix panel will send spurious interrupts after a
+	 * 'finger up' event, which will always cause a timeout.
+	 */
+	return 0;
 }
 
 static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)