Merge tag 'tegra-for-3.9-soc-ccf' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From Stephen Warren:
ARM: tegra: Common Clock Framework rework

Tegra already supports the common clock framework, but had issues:

1) The clock driver was located in arch/arm/mach-tegra/ rather than
   drivers/clk/.

2) A single "Tegra clock" type was implemented, rather than separate
   clock types for PLL, mux, divider, ... type in HW.

3) Clock lookups by device drivers were still driven by device name
   and connection ID, rather than through device tree.

This pull request solves all three issues. This required some DT changes
to add clocks properties, and driver changes to request clocks more
"correctly". Finally, this rework allows all AUXDATA to be removed from
Tegra board files, and various duplicate clock lookup entries to be
removed from the driver.

This pull request is based on the previous pull request, with tag
tegra-for-3.9-cleanup.

* tag 'tegra-for-3.9-soc-ccf' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (31 commits)
  clk: tegra30: remove unused TEGRA_CLK_DUPLICATE()s
  clk: tegra20: remove unused TEGRA_CLK_DUPLICATE()s
  ARM: tegra30: remove auxdata
  ARM: tegra20: remove auxdata
  ASoC: tegra: remove auxdata
  staging: nvec: remove use of clk_get_sys
  ARM: tegra: paz00: add clock information to DT
  ARM: tegra: add clock properties to Tegra30 DT
  ARM: tegra: add clock properties to Tegra20 DT
  spi: tegra: do not use clock name to get clock
  ARM: tegra: remove legacy clock code
  ARM: tegra: migrate to new clock code
  clk: tegra: add clock support for Tegra30
  clk: tegra: add clock support for Tegra20
  clk: tegra: add Tegra specific clocks
  ARM: tegra: define Tegra30 CAR binding
  ARM: tegra: define Tegra20 CAR binding
  ARM: tegra: move tegra_cpu_car.h to linux/clk/tegra.h
  ARM: tegra: add function to read chipid
  ARM: tegra: fix compile error when disable CPU_IDLE
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/board-dt-tegra30.c
	arch/arm/mach-tegra/common.c
	arch/arm/mach-tegra/platsmp.c
	drivers/clocksource/Makefile

1 files changed, 502 insertions, 0 deletions

diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
new file mode 100644
index 000000000000..0744731c6229
--- /dev/null
+++ b/drivers/clk/tegra/clk.h
@@ -0,0 +1,502 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __TEGRA_CLK_H
+#define __TEGRA_CLK_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+/**
+ * struct tegra_clk_sync_source - external clock source from codec
+ *
+ * @hw: handle between common and hardware-specific interfaces
+ * @rate: input frequency from source
+ * @max_rate: max rate allowed
+ */
+struct tegra_clk_sync_source {
+	struct		clk_hw hw;
+	unsigned long	rate;
+	unsigned long	max_rate;
+};
+
+#define to_clk_sync_source(_hw)					\
+	container_of(_hw, struct tegra_clk_sync_source, hw)
+
+extern const struct clk_ops tegra_clk_sync_source_ops;
+struct clk *tegra_clk_register_sync_source(const char *name,
+		unsigned long fixed_rate, unsigned long max_rate);
+
+/**
+ * struct tegra_clk_frac_div - fractional divider clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register containing divider
+ * @flags:	hardware-specific flags
+ * @shift:	shift to the divider bit field
+ * @width:	width of the divider bit field
+ * @frac_width:	width of the fractional bit field
+ * @lock:	register lock
+ *
+ * Flags:
+ * TEGRA_DIVIDER_ROUND_UP - This flags indicates to round up the divider value.
+ * TEGRA_DIVIDER_FIXED - Fixed rate PLL dividers has addition override bit, this
+ *      flag indicates that this divider is for fixed rate PLL.
+ * TEGRA_DIVIDER_INT - Some modules can not cope with the duty cycle when
+ *      fraction bit is set. This flags indicates to calculate divider for which
+ *      fracton bit will be zero.
+ * TEGRA_DIVIDER_UART - UART module divider has additional enable bit which is
+ *      set when divider value is not 0. This flags indicates that the divider
+ *      is for UART module.
+ */
+struct tegra_clk_frac_div {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		flags;
+	u8		shift;
+	u8		width;
+	u8		frac_width;
+	spinlock_t	*lock;
+};
+
+#define to_clk_frac_div(_hw) container_of(_hw, struct tegra_clk_frac_div, hw)
+
+#define TEGRA_DIVIDER_ROUND_UP BIT(0)
+#define TEGRA_DIVIDER_FIXED BIT(1)
+#define TEGRA_DIVIDER_INT BIT(2)
+#define TEGRA_DIVIDER_UART BIT(3)
+
+extern const struct clk_ops tegra_clk_frac_div_ops;
+struct clk *tegra_clk_register_divider(const char *name,
+		const char *parent_name, void __iomem *reg,
+		unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width,
+		u8 frac_width, spinlock_t *lock);
+
+/*
+ * Tegra PLL:
+ *
+ * In general, there are 3 requirements for each PLL
+ * that SW needs to be comply with.
+ * (1) Input frequency range (REF).
+ * (2) Comparison frequency range (CF). CF = REF/DIVM.
+ * (3) VCO frequency range (VCO).  VCO = CF * DIVN.
+ *
+ * The final PLL output frequency (FO) = VCO >> DIVP.
+ */
+
+/**
+ * struct tegra_clk_pll_freq_table - PLL frequecy table
+ *
+ * @input_rate:		input rate from source
+ * @output_rate:	output rate from PLL for the input rate
+ * @n:			feedback divider
+ * @m:			input divider
+ * @p:			post divider
+ * @cpcon:		charge pump current
+ */
+struct tegra_clk_pll_freq_table {
+	unsigned long	input_rate;
+	unsigned long	output_rate;
+	u16		n;
+	u16		m;
+	u8		p;
+	u8		cpcon;
+};
+
+/**
+ * struct clk_pll_params - PLL parameters
+ *
+ * @input_min:			Minimum input frequency
+ * @input_max:			Maximum input frequency
+ * @cf_min:			Minimum comparison frequency
+ * @cf_max:			Maximum comparison frequency
+ * @vco_min:			Minimum VCO frequency
+ * @vco_max:			Maximum VCO frequency
+ * @base_reg:			PLL base reg offset
+ * @misc_reg:			PLL misc reg offset
+ * @lock_reg:			PLL lock reg offset
+ * @lock_bit_idx:		Bit index for PLL lock status
+ * @lock_enable_bit_idx:	Bit index to enable PLL lock
+ * @lock_delay:			Delay in us if PLL lock is not used
+ */
+struct tegra_clk_pll_params {
+	unsigned long	input_min;
+	unsigned long	input_max;
+	unsigned long	cf_min;
+	unsigned long	cf_max;
+	unsigned long	vco_min;
+	unsigned long	vco_max;
+
+	u32		base_reg;
+	u32		misc_reg;
+	u32		lock_reg;
+	u32		lock_bit_idx;
+	u32		lock_enable_bit_idx;
+	int		lock_delay;
+};
+
+/**
+ * struct tegra_clk_pll - Tegra PLL clock
+ *
+ * @hw:		handle between common and hardware-specifix interfaces
+ * @clk_base:	address of CAR controller
+ * @pmc:	address of PMC, required to read override bits
+ * @freq_table:	array of frequencies supported by PLL
+ * @params:	PLL parameters
+ * @flags:	PLL flags
+ * @fixed_rate:	PLL rate if it is fixed
+ * @lock:	register lock
+ * @divn_shift:	shift to the feedback divider bit field
+ * @divn_width:	width of the feedback divider bit field
+ * @divm_shift:	shift to the input divider bit field
+ * @divm_width:	width of the input divider bit field
+ * @divp_shift:	shift to the post divider bit field
+ * @divp_width:	width of the post divider bit field
+ *
+ * Flags:
+ * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
+ *     PLL locking. If not set it will use lock_delay value to wait.
+ * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
+ *     to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
+ *     to be programmed to change output frequency of the PLL.
+ * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
+ *     to be programmed to change output frequency of the PLL.
+ * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
+ *     that it is PLLU and invert post divider value.
+ * TEGRA_PLLM - PLLM has additional override settings in PMC. This
+ *     flag indicates that it is PLLM and use override settings.
+ * TEGRA_PLL_FIXED - We are not supposed to change output frequency
+ *     of some plls.
+ * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
+ */
+struct tegra_clk_pll {
+	struct clk_hw	hw;
+	void __iomem	*clk_base;
+	void __iomem	*pmc;
+	u8		flags;
+	unsigned long	fixed_rate;
+	spinlock_t	*lock;
+	u8		divn_shift;
+	u8		divn_width;
+	u8		divm_shift;
+	u8		divm_width;
+	u8		divp_shift;
+	u8		divp_width;
+	struct tegra_clk_pll_freq_table	*freq_table;
+	struct tegra_clk_pll_params	*params;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
+
+#define TEGRA_PLL_USE_LOCK BIT(0)
+#define TEGRA_PLL_HAS_CPCON BIT(1)
+#define TEGRA_PLL_SET_LFCON BIT(2)
+#define TEGRA_PLL_SET_DCCON BIT(3)
+#define TEGRA_PLLU BIT(4)
+#define TEGRA_PLLM BIT(5)
+#define TEGRA_PLL_FIXED BIT(6)
+#define TEGRA_PLLE_CONFIGURE BIT(7)
+
+extern const struct clk_ops tegra_clk_pll_ops;
+extern const struct clk_ops tegra_clk_plle_ops;
+struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
+		void __iomem *clk_base, void __iomem *pmc,
+		unsigned long flags, unsigned long fixed_rate,
+		struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+		struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
+		void __iomem *clk_base, void __iomem *pmc,
+		unsigned long flags, unsigned long fixed_rate,
+		struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+		struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
+
+/**
+ * struct tegra_clk_pll_out - PLL divider down clock
+ *
+ * @hw:			handle between common and hardware-specific interfaces
+ * @reg:		register containing the PLL divider
+ * @enb_bit_idx:	bit to enable/disable PLL divider
+ * @rst_bit_idx:	bit to reset PLL divider
+ * @lock:		register lock
+ * @flags:		hardware-specific flags
+ */
+struct tegra_clk_pll_out {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		enb_bit_idx;
+	u8		rst_bit_idx;
+	spinlock_t	*lock;
+	u8		flags;
+};
+
+#define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw)
+
+extern const struct clk_ops tegra_clk_pll_out_ops;
+struct clk *tegra_clk_register_pll_out(const char *name,
+		const char *parent_name, void __iomem *reg, u8 enb_bit_idx,
+		u8 rst_bit_idx, unsigned long flags, u8 pll_div_flags,
+		spinlock_t *lock);
+
+/**
+ * struct tegra_clk_periph_regs -  Registers controlling peripheral clock
+ *
+ * @enb_reg:		read the enable status
+ * @enb_set_reg:	write 1 to enable clock
+ * @enb_clr_reg:	write 1 to disable clock
+ * @rst_reg:		read the reset status
+ * @rst_set_reg:	write 1 to assert the reset of peripheral
+ * @rst_clr_reg:	write 1 to deassert the reset of peripheral
+ */
+struct tegra_clk_periph_regs {
+	u32 enb_reg;
+	u32 enb_set_reg;
+	u32 enb_clr_reg;
+	u32 rst_reg;
+	u32 rst_set_reg;
+	u32 rst_clr_reg;
+};
+
+/**
+ * struct tegra_clk_periph_gate - peripheral gate clock
+ *
+ * @magic:		magic number to validate type
+ * @hw:			handle between common and hardware-specific interfaces
+ * @clk_base:		address of CAR controller
+ * @regs:		Registers to control the peripheral
+ * @flags:		hardware-specific flags
+ * @clk_num:		Clock number
+ * @enable_refcnt:	array to maintain reference count of the clock
+ *
+ * Flags:
+ * TEGRA_PERIPH_NO_RESET - This flag indicates that reset is not allowed
+ *     for this module.
+ * TEGRA_PERIPH_MANUAL_RESET - This flag indicates not to reset module
+ *     after clock enable and driver for the module is responsible for
+ *     doing reset.
+ * TEGRA_PERIPH_ON_APB - If peripheral is in the APB bus then read the
+ *     bus to flush the write operation in apb bus. This flag indicates
+ *     that this peripheral is in apb bus.
+ */
+struct tegra_clk_periph_gate {
+	u32			magic;
+	struct clk_hw		hw;
+	void __iomem		*clk_base;
+	u8			flags;
+	int			clk_num;
+	int			*enable_refcnt;
+	struct tegra_clk_periph_regs	*regs;
+};
+
+#define to_clk_periph_gate(_hw)					\
+	container_of(_hw, struct tegra_clk_periph_gate, hw)
+
+#define TEGRA_CLK_PERIPH_GATE_MAGIC 0x17760309
+
+#define TEGRA_PERIPH_NO_RESET BIT(0)
+#define TEGRA_PERIPH_MANUAL_RESET BIT(1)
+#define TEGRA_PERIPH_ON_APB BIT(2)
+
+void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert);
+extern const struct clk_ops tegra_clk_periph_gate_ops;
+struct clk *tegra_clk_register_periph_gate(const char *name,
+		const char *parent_name, u8 gate_flags, void __iomem *clk_base,
+		unsigned long flags, int clk_num,
+		struct tegra_clk_periph_regs *pregs, int *enable_refcnt);
+
+/**
+ * struct clk-periph - peripheral clock
+ *
+ * @magic:	magic number to validate type
+ * @hw:		handle between common and hardware-specific interfaces
+ * @mux:	mux clock
+ * @divider:	divider clock
+ * @gate:	gate clock
+ * @mux_ops:	mux clock ops
+ * @div_ops:	divider clock ops
+ * @gate_ops:	gate clock ops
+ */
+struct tegra_clk_periph {
+	u32			magic;
+	struct clk_hw		hw;
+	struct clk_mux		mux;
+	struct tegra_clk_frac_div	divider;
+	struct tegra_clk_periph_gate	gate;
+
+	const struct clk_ops	*mux_ops;
+	const struct clk_ops	*div_ops;
+	const struct clk_ops	*gate_ops;
+};
+
+#define to_clk_periph(_hw) container_of(_hw, struct tegra_clk_periph, hw)
+
+#define TEGRA_CLK_PERIPH_MAGIC 0x18221223
+
+extern const struct clk_ops tegra_clk_periph_ops;
+struct clk *tegra_clk_register_periph(const char *name,
+		const char **parent_names, int num_parents,
+		struct tegra_clk_periph *periph, void __iomem *clk_base,
+		u32 offset);
+struct clk *tegra_clk_register_periph_nodiv(const char *name,
+		const char **parent_names, int num_parents,
+		struct tegra_clk_periph *periph, void __iomem *clk_base,
+		u32 offset);
+
+#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags,		\
+			 _div_shift, _div_width, _div_frac_width,	\
+			 _div_flags, _clk_num, _enb_refcnt, _regs,	\
+			 _gate_flags)					\
+	{								\
+		.mux = {						\
+			.flags = _mux_flags,				\
+			.shift = _mux_shift,				\
+			.width = _mux_width,				\
+		},							\
+		.divider = {						\
+			.flags = _div_flags,				\
+			.shift = _div_shift,				\
+			.width = _div_width,				\
+			.frac_width = _div_frac_width,			\
+		},							\
+		.gate = {						\
+			.flags = _gate_flags,				\
+			.clk_num = _clk_num,				\
+			.enable_refcnt = _enb_refcnt,			\
+			.regs = _regs,					\
+		},							\
+		.mux_ops = &clk_mux_ops,				\
+		.div_ops = &tegra_clk_frac_div_ops,			\
+		.gate_ops = &tegra_clk_periph_gate_ops,			\
+	}
+
+struct tegra_periph_init_data {
+	const char *name;
+	int clk_id;
+	const char **parent_names;
+	int num_parents;
+	struct tegra_clk_periph periph;
+	u32 offset;
+	const char *con_id;
+	const char *dev_id;
+};
+
+#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
+			_mux_shift, _mux_width, _mux_flags, _div_shift,	\
+			_div_width, _div_frac_width, _div_flags, _regs,	\
+			_clk_num, _enb_refcnt, _gate_flags, _clk_id)	\
+	{								\
+		.name = _name,						\
+		.clk_id = _clk_id,					\
+		.parent_names = _parent_names,				\
+		.num_parents = ARRAY_SIZE(_parent_names),		\
+		.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width,	\
+					   _mux_flags, _div_shift,	\
+					   _div_width, _div_frac_width,	\
+					   _div_flags, _clk_num,	\
+					   _enb_refcnt, _regs,		\
+					   _gate_flags),		\
+		.offset = _offset,					\
+		.con_id = _con_id,					\
+		.dev_id = _dev_id,					\
+	}
+
+/**
+ * struct clk_super_mux - super clock
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @reg:	register controlling multiplexer
+ * @width:	width of the multiplexer bit field
+ * @flags:	hardware-specific flags
+ * @div2_index:	bit controlling divide-by-2
+ * @pllx_index:	PLLX index in the parent list
+ * @lock:	register lock
+ *
+ * Flags:
+ * TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates
+ *     that this is LP cluster clock.
+ */
+struct tegra_clk_super_mux {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	u8		width;
+	u8		flags;
+	u8		div2_index;
+	u8		pllx_index;
+	spinlock_t	*lock;
+};
+
+#define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw)
+
+#define TEGRA_DIVIDER_2 BIT(0)
+
+extern const struct clk_ops tegra_clk_super_ops;
+struct clk *tegra_clk_register_super_mux(const char *name,
+		const char **parent_names, u8 num_parents,
+		unsigned long flags, void __iomem *reg, u8 clk_super_flags,
+		u8 width, u8 pllx_index, u8 div2_index, spinlock_t *lock);
+
+/**
+ * struct clk_init_tabel - clock initialization table
+ * @clk_id:	clock id as mentioned in device tree bindings
+ * @parent_id:	parent clock id as mentioned in device tree bindings
+ * @rate:	rate to set
+ * @state:	enable/disable
+ */
+struct tegra_clk_init_table {
+	unsigned int	clk_id;
+	unsigned int	parent_id;
+	unsigned long	rate;
+	int		state;
+};
+
+/**
+ * struct clk_duplicate - duplicate clocks
+ * @clk_id:	clock id as mentioned in device tree bindings
+ * @lookup:	duplicate lookup entry for the clock
+ */
+struct tegra_clk_duplicate {
+	int			clk_id;
+	struct clk_lookup	lookup;
+};
+
+#define TEGRA_CLK_DUPLICATE(_clk_id, _dev, _con) \
+	{					\
+		.clk_id = _clk_id,		\
+		.lookup = {			\
+			.dev_id = _dev,		\
+			.con_id = _con,		\
+		},				\
+	}
+
+void tegra_init_from_table(struct tegra_clk_init_table *tbl,
+		struct clk *clks[], int clk_max);
+
+void tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
+		struct clk *clks[], int clk_max);
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+void tegra20_clock_init(struct device_node *np);
+#else
+static inline void tegra20_clock_init(struct device_node *np) {}
+#endif /* CONFIG_ARCH_TEGRA_2x_SOC */
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+void tegra30_clock_init(struct device_node *np);
+#else
+static inline void tegra30_clock_init(struct device_node *np) {}
+#endif /* CONFIG_ARCH_TEGRA_3x_SOC */
+
+#endif /* TEGRA_CLK_H */