Merge branch 'for-next' into for-linus

Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c

5 files changed, 5 insertions, 5 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9c77b0d1a9d0..4a28420efff2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2232,7 +2232,7 @@ retry:
 		 * Some drives were very specific about that exact sequence.
 		 *
 		 * Note that ATA4 says lba is mandatory so the second check
-		 * shoud never trigger.
+		 * should never trigger.
 		 */
 		if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
 			err_mask = ata_dev_init_params(dev, id[3], id[6]);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 02441fd57e9e..561dec2481cb 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2287,7 +2287,7 @@ EXPORT_SYMBOL_GPL(ata_sff_postreset);
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 294f3020a78a..8e5e13210426 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -161,7 +161,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *	Called when the libata layer is about to issue a command. We wrap
  *	this interface so that we can load the correct ATA timings if
- *	neccessary.
+ *	necessary.
  */
 
 static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index c86c71639a95..727a81ce4c9f 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -180,7 +180,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev)
  *	@id: Entry in match table
  *
  *	Perform basic initialisation. We set the device up so we access all
- *	ports via BAR4. This is neccessary to work around errata.
+ *	ports via BAR4. This is necessary to work around errata.
  */
 
 static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 36103531feeb..147de2fd66d2 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -131,7 +131,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */