Merge branch 'for-linus' into for-next

Back-merge from for-linus just to make the further development easier.

13 files changed, 130 insertions, 186 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 20abd912f0e4..cea4fc19e844 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -313,7 +313,7 @@ int lapic_get_maxlvt(void)
 
 /* Clock divisor */
 #define APIC_DIVISOR 16
-#define TSC_DIVISOR  32
+#define TSC_DIVISOR  8
 
 /*
  * This function sets up the local APIC timer, with a timeout of
@@ -565,13 +565,37 @@ static void setup_APIC_timer(void)
 				    CLOCK_EVT_FEAT_DUMMY);
 		levt->set_next_event = lapic_next_deadline;
 		clockevents_config_and_register(levt,
-						(tsc_khz / TSC_DIVISOR) * 1000,
+						tsc_khz * (1000 / TSC_DIVISOR),
 						0xF, ~0UL);
 	} else
 		clockevents_register_device(levt);
 }
 
 /*
+ * Install the updated TSC frequency from recalibration at the TSC
+ * deadline clockevent devices.
+ */
+static void __lapic_update_tsc_freq(void *info)
+{
+	struct clock_event_device *levt = this_cpu_ptr(&lapic_events);
+
+	if (!this_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER))
+		return;
+
+	clockevents_update_freq(levt, tsc_khz * (1000 / TSC_DIVISOR));
+}
+
+void lapic_update_tsc_freq(void)
+{
+	/*
+	 * The clockevent device's ->mult and ->shift can both be
+	 * changed. In order to avoid races, schedule the frequency
+	 * update code on each CPU.
+	 */
+	on_each_cpu(__lapic_update_tsc_freq, NULL, 0);
+}
+
+/*
  * In this functions we calibrate APIC bus clocks to the external timer.
  *
  * We want to do the calibration only once since we want to have local timer
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 6368fa69d2af..54f35d988025 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -155,7 +155,7 @@ static void init_x2apic_ldr(void)
 /*
  * At CPU state changes, update the x2apic cluster sibling info.
  */
-int x2apic_prepare_cpu(unsigned int cpu)
+static int x2apic_prepare_cpu(unsigned int cpu)
 {
 	if (!zalloc_cpumask_var(&per_cpu(cpus_in_cluster, cpu), GFP_KERNEL))
 		return -ENOMEM;
@@ -168,7 +168,7 @@ int x2apic_prepare_cpu(unsigned int cpu)
 	return 0;
 }
 
-int x2apic_dead_cpu(unsigned int this_cpu)
+static int x2apic_dead_cpu(unsigned int this_cpu)
 {
 	int cpu;
 
@@ -186,13 +186,18 @@ int x2apic_dead_cpu(unsigned int this_cpu)
 static int x2apic_cluster_probe(void)
 {
 	int cpu = smp_processor_id();
+	int ret;
 
 	if (!x2apic_mode)
 		return 0;
 
+	ret = cpuhp_setup_state(CPUHP_X2APIC_PREPARE, "X2APIC_PREPARE",
+				x2apic_prepare_cpu, x2apic_dead_cpu);
+	if (ret < 0) {
+		pr_err("Failed to register X2APIC_PREPARE\n");
+		return 0;
+	}
 	cpumask_set_cpu(cpu, per_cpu(cpus_in_cluster, cpu));
-	cpuhp_setup_state(CPUHP_X2APIC_PREPARE, "X2APIC_PREPARE",
-			  x2apic_prepare_cpu, x2apic_dead_cpu);
 	return 1;
 }
 
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 09b59adaea3f..cb0673c1e940 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -223,6 +223,11 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	if (strncmp(oem_id, "SGI", 3) != 0)
 		return 0;
 
+	if (numa_off) {
+		pr_err("UV: NUMA is off, disabling UV support\n");
+		return 0;
+	}
+
 	/* Setup early hub type field in uv_hub_info for Node 0 */
 	uv_cpu_info->p_uv_hub_info = &uv_hub_info_node0;
 
@@ -325,7 +330,7 @@ static __init void build_uv_gr_table(void)
 	struct uv_gam_range_entry *gre = uv_gre_table;
 	struct uv_gam_range_s *grt;
 	unsigned long last_limit = 0, ram_limit = 0;
-	int bytes, i, sid, lsid = -1;
+	int bytes, i, sid, lsid = -1, indx = 0, lindx = -1;
 
 	if (!gre)
 		return;
@@ -356,11 +361,12 @@ static __init void build_uv_gr_table(void)
 		}
 		sid = gre->sockid - _min_socket;
 		if (lsid < sid) {		/* new range */
-			grt = &_gr_table[sid];
-			grt->base = lsid;
+			grt = &_gr_table[indx];
+			grt->base = lindx;
 			grt->nasid = gre->nasid;
 			grt->limit = last_limit = gre->limit;
 			lsid = sid;
+			lindx = indx++;
 			continue;
 		}
 		if (lsid == sid && !ram_limit) {	/* update range */
@@ -371,7 +377,7 @@ static __init void build_uv_gr_table(void)
 		}
 		if (!ram_limit) {		/* non-contiguous ram range */
 			grt++;
-			grt->base = sid - 1;
+			grt->base = lindx;
 			grt->nasid = gre->nasid;
 			grt->limit = last_limit = gre->limit;
 			continue;
@@ -1155,19 +1161,18 @@ static void __init decode_gam_rng_tbl(unsigned long ptr)
 	for (; gre->type != UV_GAM_RANGE_TYPE_UNUSED; gre++) {
 		if (!index) {
 			pr_info("UV: GAM Range Table...\n");
-			pr_info("UV:  # %20s %14s %5s %4s %5s %3s %2s %3s\n",
+			pr_info("UV:  # %20s %14s %5s %4s %5s %3s %2s\n",
 				"Range", "", "Size", "Type", "NASID",
-				"SID", "PN", "PXM");
+				"SID", "PN");
 		}
 		pr_info(
-		"UV: %2d: 0x%014lx-0x%014lx %5luG %3d   %04x  %02x %02x %3d\n",
+		"UV: %2d: 0x%014lx-0x%014lx %5luG %3d   %04x  %02x %02x\n",
 			index++,
 			(unsigned long)lgre << UV_GAM_RANGE_SHFT,
 			(unsigned long)gre->limit << UV_GAM_RANGE_SHFT,
 			((unsigned long)(gre->limit - lgre)) >>
 				(30 - UV_GAM_RANGE_SHFT), /* 64M -> 1G */
-			gre->type, gre->nasid, gre->sockid,
-			gre->pnode, gre->pxm);
+			gre->type, gre->nasid, gre->sockid, gre->pnode);
 
 		lgre = gre->limit;
 		if (sock_min > gre->sockid)
@@ -1286,7 +1291,7 @@ static void __init build_socket_tables(void)
 		_pnode_to_socket[i] = SOCK_EMPTY;
 
 	/* fill in pnode/node/addr conversion list values */
-	pr_info("UV: GAM Building socket/pnode/pxm conversion tables\n");
+	pr_info("UV: GAM Building socket/pnode conversion tables\n");
 	for (; gre->type != UV_GAM_RANGE_TYPE_UNUSED; gre++) {
 		if (gre->type == UV_GAM_RANGE_TYPE_HOLE)
 			continue;
@@ -1294,20 +1299,18 @@ static void __init build_socket_tables(void)
 		if (_socket_to_pnode[i] != SOCK_EMPTY)
 			continue;	/* duplicate */
 		_socket_to_pnode[i] = gre->pnode;
-		_socket_to_node[i] = gre->pxm;
 
 		i = gre->pnode - minpnode;
 		_pnode_to_socket[i] = gre->sockid;
 
 		pr_info(
-		"UV: sid:%02x type:%d nasid:%04x pn:%02x pxm:%2d pn2s:%2x\n",
+		"UV: sid:%02x type:%d nasid:%04x pn:%02x pn2s:%2x\n",
 			gre->sockid, gre->type, gre->nasid,
 			_socket_to_pnode[gre->sockid - minsock],
-			_socket_to_node[gre->sockid - minsock],
 			_pnode_to_socket[gre->pnode - minpnode]);
 	}
 
-	/* check socket -> node values */
+	/* Set socket -> node values */
 	lnid = -1;
 	for_each_present_cpu(cpu) {
 		int nid = cpu_to_node(cpu);
@@ -1318,14 +1321,9 @@ static void __init build_socket_tables(void)
 		lnid = nid;
 		apicid = per_cpu(x86_cpu_to_apicid, cpu);
 		sockid = apicid >> uv_cpuid.socketid_shift;
-		i = sockid - minsock;
-
-		if (nid != _socket_to_node[i]) {
-			pr_warn(
-			"UV: %02x: type:%d socket:%02x PXM:%02x != node:%2d\n",
-				i, sockid, gre->type, _socket_to_node[i], nid);
-			_socket_to_node[i] = nid;
-		}
+		_socket_to_node[sockid - minsock] = nid;
+		pr_info("UV: sid:%02x: apicid:%04x node:%2d\n",
+			sockid, apicid, nid);
 	}
 
 	/* Setup physical blade to pnode translation from GAM Range Table */
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 27a0228c9cae..b816971f5da4 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -355,6 +355,7 @@ void load_ucode_amd_ap(void)
 	unsigned int cpu = smp_processor_id();
 	struct equiv_cpu_entry *eq;
 	struct microcode_amd *mc;
+	u8 *cont = container;
 	u32 rev, eax;
 	u16 eq_id;
 
@@ -371,8 +372,11 @@ void load_ucode_amd_ap(void)
 	if (check_current_patch_level(&rev, false))
 		return;
 
+	/* Add CONFIG_RANDOMIZE_MEMORY offset. */
+	cont += PAGE_OFFSET - __PAGE_OFFSET_BASE;
+
 	eax = cpuid_eax(0x00000001);
-	eq  = (struct equiv_cpu_entry *)(container + CONTAINER_HDR_SZ);
+	eq  = (struct equiv_cpu_entry *)(cont + CONTAINER_HDR_SZ);
 
 	eq_id = find_equiv_id(eq, eax);
 	if (!eq_id)
@@ -434,6 +438,9 @@ int __init save_microcode_in_initrd_amd(void)
 	else
 		container = cont_va;
 
+	/* Add CONFIG_RANDOMIZE_MEMORY offset. */
+	container += PAGE_OFFSET - __PAGE_OFFSET_BASE;
+
 	eax   = cpuid_eax(0x00000001);
 	eax   = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff);
 
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 680049aa4593..01567aa87503 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -866,105 +866,17 @@ const void *get_xsave_field_ptr(int xsave_state)
 	return get_xsave_addr(&fpu->state.xsave, xsave_state);
 }
 
-
-/*
- * Set xfeatures (aka XSTATE_BV) bit for a feature that we want
- * to take out of its "init state".  This will ensure that an
- * XRSTOR actually restores the state.
- */
-static void fpu__xfeature_set_non_init(struct xregs_state *xsave,
-		int xstate_feature_mask)
-{
-	xsave->header.xfeatures |= xstate_feature_mask;
-}
-
-/*
- * This function is safe to call whether the FPU is in use or not.
- *
- * Note that this only works on the current task.
- *
- * Inputs:
- *	@xsave_state: state which is defined in xsave.h (e.g. XFEATURE_MASK_FP,
- *	XFEATURE_MASK_SSE, etc...)
- *	@xsave_state_ptr: a pointer to a copy of the state that you would
- *	like written in to the current task's FPU xsave state.  This pointer
- *	must not be located in the current tasks's xsave area.
- * Output:
- *	address of the state in the xsave area or NULL if the state
- *	is not present or is in its 'init state'.
- */
-static void fpu__xfeature_set_state(int xstate_feature_mask,
-		void *xstate_feature_src, size_t len)
-{
-	struct xregs_state *xsave = &current->thread.fpu.state.xsave;
-	struct fpu *fpu = &current->thread.fpu;
-	void *dst;
-
-	if (!boot_cpu_has(X86_FEATURE_XSAVE)) {
-		WARN_ONCE(1, "%s() attempted with no xsave support", __func__);
-		return;
-	}
-
-	/*
-	 * Tell the FPU code that we need the FPU state to be in
-	 * 'fpu' (not in the registers), and that we need it to
-	 * be stable while we write to it.
-	 */
-	fpu__current_fpstate_write_begin();
-
-	/*
-	 * This method *WILL* *NOT* work for compact-format
-	 * buffers.  If the 'xstate_feature_mask' is unset in
-	 * xcomp_bv then we may need to move other feature state
-	 * "up" in the buffer.
-	 */
-	if (xsave->header.xcomp_bv & xstate_feature_mask) {
-		WARN_ON_ONCE(1);
-		goto out;
-	}
-
-	/* find the location in the xsave buffer of the desired state */
-	dst = __raw_xsave_addr(&fpu->state.xsave, xstate_feature_mask);
-
-	/*
-	 * Make sure that the pointer being passed in did not
-	 * come from the xsave buffer itself.
-	 */
-	WARN_ONCE(xstate_feature_src == dst, "set from xsave buffer itself");
-
-	/* put the caller-provided data in the location */
-	memcpy(dst, xstate_feature_src, len);
-
-	/*
-	 * Mark the xfeature so that the CPU knows there is state
-	 * in the buffer now.
-	 */
-	fpu__xfeature_set_non_init(xsave, xstate_feature_mask);
-out:
-	/*
-	 * We are done writing to the 'fpu'.  Reenable preeption
-	 * and (possibly) move the fpstate back in to the fpregs.
-	 */
-	fpu__current_fpstate_write_end();
-}
-
 #define NR_VALID_PKRU_BITS (CONFIG_NR_PROTECTION_KEYS * 2)
 #define PKRU_VALID_MASK (NR_VALID_PKRU_BITS - 1)
 
 /*
- * This will go out and modify the XSAVE buffer so that PKRU is
- * set to a particular state for access to 'pkey'.
- *
- * PKRU state does affect kernel access to user memory.  We do
- * not modfiy PKRU *itself* here, only the XSAVE state that will
- * be restored in to PKRU when we return back to userspace.
+ * This will go out and modify PKRU register to set the access
+ * rights for @pkey to @init_val.
  */
 int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 		unsigned long init_val)
 {
-	struct xregs_state *xsave = &tsk->thread.fpu.state.xsave;
-	struct pkru_state *old_pkru_state;
-	struct pkru_state new_pkru_state;
+	u32 old_pkru;
 	int pkey_shift = (pkey * PKRU_BITS_PER_PKEY);
 	u32 new_pkru_bits = 0;
 
@@ -974,6 +886,15 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 	 */
 	if (!boot_cpu_has(X86_FEATURE_OSPKE))
 		return -EINVAL;
+	/*
+	 * For most XSAVE components, this would be an arduous task:
+	 * brining fpstate up to date with fpregs, updating fpstate,
+	 * then re-populating fpregs.  But, for components that are
+	 * never lazily managed, we can just access the fpregs
+	 * directly.  PKRU is never managed lazily, so we can just
+	 * manipulate it directly.  Make sure it stays that way.
+	 */
+	WARN_ON_ONCE(!use_eager_fpu());
 
 	/* Set the bits we need in PKRU:  */
 	if (init_val & PKEY_DISABLE_ACCESS)
@@ -984,37 +905,12 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 	/* Shift the bits in to the correct place in PKRU for pkey: */
 	new_pkru_bits <<= pkey_shift;
 
-	/* Locate old copy of the state in the xsave buffer: */
-	old_pkru_state = get_xsave_addr(xsave, XFEATURE_MASK_PKRU);
-
-	/*
-	 * When state is not in the buffer, it is in the init
-	 * state, set it manually.  Otherwise, copy out the old
-	 * state.
-	 */
-	if (!old_pkru_state)
-		new_pkru_state.pkru = 0;
-	else
-		new_pkru_state.pkru = old_pkru_state->pkru;
-
-	/* Mask off any old bits in place: */
-	new_pkru_state.pkru &= ~((PKRU_AD_BIT|PKRU_WD_BIT) << pkey_shift);
-
-	/* Set the newly-requested bits: */
-	new_pkru_state.pkru |= new_pkru_bits;
-
-	/*
-	 * We could theoretically live without zeroing pkru.pad.
-	 * The current XSAVE feature state definition says that
-	 * only bytes 0->3 are used.  But we do not want to
-	 * chance leaking kernel stack out to userspace in case a
-	 * memcpy() of the whole xsave buffer was done.
-	 *
-	 * They're in the same cacheline anyway.
-	 */
-	new_pkru_state.pad = 0;
+	/* Get old PKRU and mask off any old bits in place: */
+	old_pkru = read_pkru();
+	old_pkru &= ~((PKRU_AD_BIT|PKRU_WD_BIT) << pkey_shift);
 
-	fpu__xfeature_set_state(XFEATURE_MASK_PKRU, &new_pkru_state, sizeof(new_pkru_state));
+	/* Write old part along with new part: */
+	write_pkru(old_pkru | new_pkru_bits);
 
 	return 0;
 }
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 2dda0bc4576e..f16c55bfc090 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -25,8 +25,6 @@ static void __init i386_default_early_setup(void)
 	/* Initialize 32bit specific setup functions */
 	x86_init.resources.reserve_resources = i386_reserve_resources;
 	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
-
-	reserve_bios_regions();
 }
 
 asmlinkage __visible void __init i386_start_kernel(void)
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 99d48e7d2974..54a2372f5dbb 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -183,7 +183,6 @@ void __init x86_64_start_reservations(char *real_mode_data)
 		copy_bootdata(__va(real_mode_data));
 
 	x86_early_init_platform_quirks();
-	reserve_bios_regions();
 
 	switch (boot_params.hdr.hardware_subarch) {
 	case X86_SUBARCH_INTEL_MID:
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ed16e58658a4..c6dfd801df97 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -1242,7 +1242,7 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 	memset(&curr_time, 0, sizeof(struct rtc_time));
 
 	if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
-		mc146818_set_time(&curr_time);
+		mc146818_get_time(&curr_time);
 
 	if (hpet_rtc_flags & RTC_UIE &&
 	    curr_time.tm_sec != hpet_prev_update_sec) {
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 61521dc19c10..9f669fdd2010 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -102,8 +102,7 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 	seq_puts(p, "  Rescheduling interrupts\n");
 	seq_printf(p, "%*s: ", prec, "CAL");
 	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count -
-					irq_stats(j)->irq_tlb_count);
+		seq_printf(p, "%10u ", irq_stats(j)->irq_call_count);
 	seq_puts(p, "  Function call interrupts\n");
 	seq_printf(p, "%*s: ", prec, "TLB");
 	for_each_online_cpu(j)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 991b77986d57..0fa60f5f5a16 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -936,8 +936,6 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_init.oem.arch_setup();
 
-	kernel_randomize_memory();
-
 	iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
 	setup_memory_map();
 	parse_setup_data();
@@ -1055,6 +1053,12 @@ void __init setup_arch(char **cmdline_p)
 
 	max_possible_pfn = max_pfn;
 
+	/*
+	 * Define random base addresses for memory sections after max_pfn is
+	 * defined and before each memory section base is used.
+	 */
+	kernel_randomize_memory();
+
 #ifdef CONFIG_X86_32
 	/* max_low_pfn get updated here */
 	find_low_pfn_range();
@@ -1097,6 +1101,8 @@ void __init setup_arch(char **cmdline_p)
 		efi_find_mirror();
 	}
 
+	reserve_bios_regions();
+
 	/*
 	 * The EFI specification says that boot service code won't be called
 	 * after ExitBootServices(). This is, in fact, a lie.
@@ -1125,7 +1131,15 @@ void __init setup_arch(char **cmdline_p)
 
 	early_trap_pf_init();
 
-	setup_real_mode();
+	/*
+	 * Update mmu_cr4_features (and, indirectly, trampoline_cr4_features)
+	 * with the current CR4 value.  This may not be necessary, but
+	 * auditing all the early-boot CR4 manipulation would be needed to
+	 * rule it out.
+	 */
+	if (boot_cpu_data.cpuid_level >= 0)
+		/* A CPU has %cr4 if and only if it has CPUID. */
+		mmu_cr4_features = __read_cr4();
 
 	memblock_set_current_limit(get_max_mapped());
 
@@ -1174,13 +1188,6 @@ void __init setup_arch(char **cmdline_p)
 
 	kasan_init();
 
-	if (boot_cpu_data.cpuid_level >= 0) {
-		/* A CPU has %cr4 if and only if it has CPUID */
-		mmu_cr4_features = __read_cr4();
-		if (trampoline_cr4_features)
-			*trampoline_cr4_features = mmu_cr4_features;
-	}
-
 #ifdef CONFIG_X86_32
 	/* sync back kernel address range */
 	clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2a6e84a30a54..4296beb8fdd3 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -100,10 +100,11 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
 /* Logical package management. We might want to allocate that dynamically */
 static int *physical_to_logical_pkg __read_mostly;
 static unsigned long *physical_package_map __read_mostly;;
-static unsigned long *logical_package_map  __read_mostly;
 static unsigned int max_physical_pkg_id __read_mostly;
 unsigned int __max_logical_packages __read_mostly;
 EXPORT_SYMBOL(__max_logical_packages);
+static unsigned int logical_packages __read_mostly;
+static bool logical_packages_frozen __read_mostly;
 
 /* Maximum number of SMT threads on any online core */
 int __max_smt_threads __read_mostly;
@@ -277,14 +278,14 @@ int topology_update_package_map(unsigned int apicid, unsigned int cpu)
 	if (test_and_set_bit(pkg, physical_package_map))
 		goto found;
 
-	new = find_first_zero_bit(logical_package_map, __max_logical_packages);
-	if (new >= __max_logical_packages) {
+	if (logical_packages_frozen) {
 		physical_to_logical_pkg[pkg] = -1;
-		pr_warn("APIC(%x) Package %u exceeds logical package map\n",
+		pr_warn("APIC(%x) Package %u exceeds logical package max\n",
 			apicid, pkg);
 		return -ENOSPC;
 	}
-	set_bit(new, logical_package_map);
+
+	new = logical_packages++;
 	pr_info("APIC(%x) Converting physical %u to logical package %u\n",
 		apicid, pkg, new);
 	physical_to_logical_pkg[pkg] = new;
@@ -341,6 +342,7 @@ static void __init smp_init_package_map(void)
 	}
 
 	__max_logical_packages = DIV_ROUND_UP(total_cpus, ncpus);
+	logical_packages = 0;
 
 	/*
 	 * Possibly larger than what we need as the number of apic ids per
@@ -352,10 +354,6 @@ static void __init smp_init_package_map(void)
 	memset(physical_to_logical_pkg, 0xff, size);
 	size = BITS_TO_LONGS(max_physical_pkg_id) * sizeof(unsigned long);
 	physical_package_map = kzalloc(size, GFP_KERNEL);
-	size = BITS_TO_LONGS(__max_logical_packages) * sizeof(unsigned long);
-	logical_package_map = kzalloc(size, GFP_KERNEL);
-
-	pr_info("Max logical packages: %u\n", __max_logical_packages);
 
 	for_each_present_cpu(cpu) {
 		unsigned int apicid = apic->cpu_present_to_apicid(cpu);
@@ -369,6 +367,15 @@ static void __init smp_init_package_map(void)
 		set_cpu_possible(cpu, false);
 		set_cpu_present(cpu, false);
 	}
+
+	if (logical_packages > __max_logical_packages) {
+		pr_warn("Detected more packages (%u), then computed by BIOS data (%u).\n",
+			logical_packages, __max_logical_packages);
+		logical_packages_frozen = true;
+		__max_logical_packages  = logical_packages;
+	}
+
+	pr_info("Max logical packages: %u\n", __max_logical_packages);
 }
 
 void __init smp_store_boot_cpu_info(void)
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 1ef87e887051..78b9cb5a26af 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -22,6 +22,7 @@
 #include <asm/nmi.h>
 #include <asm/x86_init.h>
 #include <asm/geode.h>
+#include <asm/apic.h>
 
 unsigned int __read_mostly cpu_khz;	/* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
@@ -1249,6 +1250,9 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 		(unsigned long)tsc_khz / 1000,
 		(unsigned long)tsc_khz % 1000);
 
+	/* Inform the TSC deadline clockevent devices about the recalibration */
+	lapic_update_tsc_freq();
+
 out:
 	if (boot_cpu_has(X86_FEATURE_ART))
 		art_related_clocksource = &clocksource_tsc;
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 6c1ff31d99ff..495c776de4b4 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -357,20 +357,22 @@ static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn)
 		*cursor &= 0xfe;
 	}
 	/*
-	 * Similar treatment for VEX3 prefix.
-	 * TODO: add XOP/EVEX treatment when insn decoder supports them
+	 * Similar treatment for VEX3/EVEX prefix.
+	 * TODO: add XOP treatment when insn decoder supports them
 	 */
-	if (insn->vex_prefix.nbytes == 3) {
+	if (insn->vex_prefix.nbytes >= 3) {
 		/*
 		 * vex2:     c5    rvvvvLpp   (has no b bit)
 		 * vex3/xop: c4/8f rxbmmmmm wvvvvLpp
 		 * evex:     62    rxbR00mm wvvvv1pp zllBVaaa
-		 *   (evex will need setting of both b and x since
-		 *   in non-sib encoding evex.x is 4th bit of MODRM.rm)
-		 * Setting VEX3.b (setting because it has inverted meaning):
+		 * Setting VEX3.b (setting because it has inverted meaning).
+		 * Setting EVEX.x since (in non-SIB encoding) EVEX.x
+		 * is the 4th bit of MODRM.rm, and needs the same treatment.
+		 * For VEX3-encoded insns, VEX3.x value has no effect in
+		 * non-SIB encoding, the change is superfluous but harmless.
 		 */
 		cursor = auprobe->insn + insn_offset_vex_prefix(insn) + 1;
-		*cursor |= 0x20;
+		*cursor |= 0x60;
 	}
 
 	/*
@@ -415,12 +417,10 @@ static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn)
 
 	reg = MODRM_REG(insn);	/* Fetch modrm.reg */
 	reg2 = 0xff;		/* Fetch vex.vvvv */
-	if (insn->vex_prefix.nbytes == 2)
-		reg2 = insn->vex_prefix.bytes[1];
-	else if (insn->vex_prefix.nbytes == 3)
+	if (insn->vex_prefix.nbytes)
 		reg2 = insn->vex_prefix.bytes[2];
 	/*
-	 * TODO: add XOP, EXEV vvvv reading.
+	 * TODO: add XOP vvvv reading.
 	 *
 	 * vex.vvvv field is in bits 6-3, bits are inverted.
 	 * But in 32-bit mode, high-order bit may be ignored.