Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for Linux 4.1.  Most
  noteworthy:

   - Add more Octeon-optimized crypto functions
   - Octeon crypto preemption and locking fixes
   - Little endian support for Octeon
   - Use correct CSR to soft reset Octeons
   - Support LEDs on the Octeon-based DSR-1000N
   - Fix PCI interrupt mapping for the Octeon-based DSR-1000N
   - Mark prom_free_prom_memory() as __init for a number of systems
   - Support for Imagination's Pistachio SOC.  This includes arch and
     CLK bits.  I'd like to merge pinctrl bits later
   - Improve parallelism of csum_partial for certain pipelines
   - Organize DTB files in subdirs like other architectures
   - Implement read_sched_clock for all MIPS platforms other than
     Octeon
   - Massive series of 38 fixes and cleanups for the FPU emulator /
     kernel
   - Further FPU remulator work to support new features.  This sits on a
     separate branch which also has been pulled into the 4.1 KVM branch
   - Clean up and fixes for the SEAD3 eval board; remove unused file
   - Various updates for Netlogic platforms
   - A number of small updates for Loongson 3 platforms
   - Increase the memory limit for ATH79 platforms to 256MB
   - A fair number of fixes and updates for BCM47xx platforms
   - Finish the implementation of XPA support
   - MIPS FDC support.  No, not floppy controller but Fast Debug Channel :)
   - Detect the R16000 used in SGI legacy platforms
   - Fix Kconfig dependencies for the SSB bus support"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits)
  MIPS: Makefile: Fix MIPS ASE detection code
  MIPS: asm: elf: Set O32 default FPU flags
  MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G
  MIPS: Kconfig: Disable SMP/CPS for 64-bit
  MIPS: Hibernate: flush TLB entries earlier
  MIPS: smp-cps: cpu_set FPU mask if FPU present
  MIPS: lose_fpu(): Disable FPU when MSA enabled
  MIPS: ralink: add missing symbol for RALINK_ILL_ACC
  MIPS: ralink: Fix bad config symbol in PCI makefile.
  SSB: fix Kconfig dependencies
  MIPS: Malta: Detect and fix bad memsize values
  Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores."
  MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard.
  MIPS: Fix cpu_has_mips_r2_exec_hazard.
  MIPS: kernel: entry.S: Set correct ISA level for mips_ihb
  MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case
  MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes
  MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter
  MIPS: unaligned: Fix regular load/store instruction emulation for EVA
  MIPS: unaligned: Surround load/store macros in do {} while statements
  ...

7 files changed, 17 insertions, 27 deletions

diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 300591c6278d..2eda01e6e08f 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -43,7 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
 obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
-obj-$(CONFIG_SOC_RT2880)	+= pci-rt2880.o
+obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
 obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index 6a40f24c91b4..3407495fcbe2 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -178,13 +178,6 @@ static void xlp_msi_mask_ack(struct irq_data *d)
 	else
 		nlm_write_reg(md->lnkbase, PCIE_MSI_STATUS, 1u << vec);
 
-	/* Ack at eirr and PIC */
-	ack_c0_eirr(PIC_PCIE_LINK_MSI_IRQ(link));
-	if (cpu_is_xlp9xx())
-		nlm_pic_ack(md->node->picbase,
-				PIC_9XX_IRT_PCIE_LINK_INDEX(link));
-	else
-		nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_LINK_INDEX(link));
 }
 
 static struct irq_chip xlp_msi_chip = {
@@ -230,8 +223,6 @@ static void xlp_msix_mask_ack(struct irq_data *d)
 	}
 	nlm_write_reg(md->lnkbase, status_reg, 1u << bit);
 
-	/* Ack at eirr and PIC */
-	ack_c0_eirr(PIC_PCIE_MSIX_IRQ(link));
 	if (!cpu_is_xlp9xx())
 		nlm_pic_ack(md->node->picbase,
 				PIC_IRT_PCIE_MSIX_INDEX(msixvec));
@@ -541,6 +532,14 @@ void nlm_dispatch_msi(int node, int lirq)
 		do_IRQ(irqbase + i);
 		status &= status - 1;
 	}
+
+	/* Ack at eirr and PIC */
+	ack_c0_eirr(PIC_PCIE_LINK_MSI_IRQ(link));
+	if (cpu_is_xlp9xx())
+		nlm_pic_ack(md->node->picbase,
+				PIC_9XX_IRT_PCIE_LINK_INDEX(link));
+	else
+		nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_LINK_INDEX(link));
 }
 
 void nlm_dispatch_msix(int node, int lirq)
@@ -567,4 +566,6 @@ void nlm_dispatch_msix(int node, int lirq)
 		do_IRQ(irqbase + i);
 		status &= status - 1;
 	}
+	/* Ack at eirr and PIC */
+	ack_c0_eirr(PIC_PCIE_MSIX_IRQ(link));
 }
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
index bd2b3b60da83..07a18228e63a 100644
--- a/arch/mips/pci/pci-ar2315.c
+++ b/arch/mips/pci/pci-ar2315.c
@@ -488,7 +488,6 @@ static struct platform_driver ar2315_pci_driver = {
 	.probe = ar2315_pci_probe,
 	.driver = {
 		.name = "ar2315-pci",
-		.owner = THIS_MODULE,
 	},
 };
 
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index a04af55d89f1..c258cd406fbb 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -214,6 +214,8 @@ const char *octeon_get_pci_interrupts(void)
 		return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
 	case CVMX_BOARD_TYPE_BBGW_REF:
 		return "AABCD";
+	case CVMX_BOARD_TYPE_CUST_DSR1000N:
+		return "CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC";
 	case CVMX_BOARD_TYPE_THUNDER:
 	case CVMX_BOARD_TYPE_EBH3000:
 	default:
@@ -271,9 +273,6 @@ static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
 	pci_addr.s.func = devfn & 0x7;
 	pci_addr.s.reg = reg;
 
-#if PCI_CONFIG_SPACE_DELAY
-	udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
 	switch (size) {
 	case 4:
 		*val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64));
@@ -308,9 +307,6 @@ static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
 	pci_addr.s.func = devfn & 0x7;
 	pci_addr.s.reg = reg;
 
-#if PCI_CONFIG_SPACE_DELAY
-	udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
 	switch (size) {
 	case 4:
 		cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val));
diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
index a4574947e698..8a978022630b 100644
--- a/arch/mips/pci/pci-rt2880.c
+++ b/arch/mips/pci/pci-rt2880.c
@@ -267,7 +267,6 @@ static struct platform_driver rt288x_pci_driver = {
 	.probe = rt288x_pci_probe,
 	.driver = {
 		.name = "rt288x-pci",
-		.owner = THIS_MODULE,
 		.of_match_table = rt288x_pci_match,
 	},
 };
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 8bb13a4af68a..b8a0bf5766f2 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -91,7 +91,10 @@ static void pcibios_scanbus(struct pci_controller *hose)
 
 	pci_add_resource_offset(&resources,
 				hose->mem_resource, hose->mem_offset);
-	pci_add_resource_offset(&resources, hose->io_resource, hose->io_offset);
+	pci_add_resource_offset(&resources,
+				hose->io_resource, hose->io_offset);
+	pci_add_resource_offset(&resources,
+				hose->busn_resource, hose->busn_offset);
 	bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
 				&resources);
 	hose->bus = bus;
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 1bb0b2bf8d6e..99f3db4f0a9b 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -1762,14 +1762,6 @@ static int octeon_pcie_write_config(unsigned int pcie_port, struct pci_bus *bus,
 	default:
 		return PCIBIOS_FUNC_NOT_SUPPORTED;
 	}
-#if PCI_CONFIG_SPACE_DELAY
-	/*
-	 * Delay on writes so that devices have time to come up. Some
-	 * bridges need this to allow time for the secondary busses to
-	 * work
-	 */
-	udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
 	return PCIBIOS_SUCCESSFUL;
 }