summaryrefslogtreecommitdiffstats
path: root/arch/mips/kernel
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-04-10 11:39:22 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-04-10 11:39:22 -0700
commit948869fa9f391664cfe008fa9968a1110bfd14fd (patch)
tree8cab813f6064d9bfa03fdfe6524277ca41e65305 /arch/mips/kernel
parent2a56bb596b2c1fb612f9988afda9655c8c872a6e (diff)
parenta5075e6226c42a8e64ea1b862eec7747dc46cb32 (diff)
downloadtalos-obmc-linux-948869fa9f391664cfe008fa9968a1110bfd14fd.tar.gz
talos-obmc-linux-948869fa9f391664cfe008fa9968a1110bfd14fd.zip
Merge tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.17. Rough overview: (1) generic platform: Add support for Microsemi Ocelot SoCs (2) crypto: Add CRC32 and CRC32C HW acceleration module (3) Various cleanups and misc improvements More detailed summary: Miscellaneous: - hang more efficiently on halt/powerdown/restart - pm-cps: Block system suspend when a JTAG probe is present - expand make help text for generic defconfigs - refactor handling of legacy defconfigs - determine the entry point from the ELF file header to fix microMIPS for certain toolchains - introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code Minor cleanups: - DTS: boston/ci20: Unit name cleanups and correction - kdump: Make the default for PHYSICAL_START always 64-bit - constify gpio_led in Alchemy, AR7, and TXX9 - silence a couple of W=1 warnings - remove duplicate includes Platform support: Generic platform: - add support for Microsemi Ocelot - dt-bindings: Add vendor prefix for Microsemi Corporation - dt-bindings: Add bindings for Microsemi SoCs - add ocelot SoC & PCB123 board DTS files - MAINTAINERS: Add entry for Microsemi MIPS SoCs - enable crc32-mips on r6 configs ath79: - fix AR724X_PLL_REG_PCIE_CONFIG offset BCM47xx: - firmware: Use mac_pton() for MAC address parsing - add Luxul XAP1500/XWR1750 WiFi LEDs - use standard reset button for Luxul XWR-1750 BMIPS: - enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage - add STB PM, wake-up timer, watchdog DT nodes Octeon: - drop '.' after newlines in printk calls ralink: - pci-mt7621: Enable PCIe on MT7688" * tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits) MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750 MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs MIPS: Make the default for PHYSICAL_START always 64-bit MIPS: Use the entry point from the ELF file header MAINTAINERS: Add entry for Microsemi MIPS SoCs MIPS: generic: Add support for Microsemi Ocelot MIPS: mscc: Add ocelot PCB123 device tree MIPS: mscc: Add ocelot dtsi dt-bindings: mips: Add bindings for Microsemi SoCs dt-bindings: Add vendor prefix for Microsemi Corporation MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset MIPS: pci-mt7620: Enable PCIe on MT7688 MIPS: pm-cps: Block system suspend when a JTAG probe is present MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: Introduce isa-rev.h to define MIPS_ISA_REV MIPS: Hang more efficiently on halt/powerdown/restart FIRMWARE: bcm47xx_nvram: Replace mac address parsing MIPS: BMIPS: Add Broadcom STB watchdog nodes ...
Diffstat (limited to 'arch/mips/kernel')
-rw-r--r--arch/mips/kernel/cpu-probe.c3
-rw-r--r--arch/mips/kernel/pm-cps.c31
-rw-r--r--arch/mips/kernel/reset.c68
-rw-r--r--arch/mips/kernel/setup.c5
4 files changed, 99 insertions, 8 deletions
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index cf3fd549e16d..6b07b739f914 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -848,6 +848,9 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
if (config5 & MIPS_CONF5_CA2)
c->ases |= MIPS_ASE_MIPS16E2;
+ if (config5 & MIPS_CONF5_CRCP)
+ elf_hwcap |= HWCAP_MIPS_CRC32;
+
return config5 & MIPS_CONF_M;
}
diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
index 421e06dfee72..55c3fbeb2df6 100644
--- a/arch/mips/kernel/pm-cps.c
+++ b/arch/mips/kernel/pm-cps.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/slab.h>
+#include <linux/suspend.h>
#include <asm/asm-offsets.h>
#include <asm/cacheflush.h>
@@ -670,6 +671,34 @@ static int cps_pm_online_cpu(unsigned int cpu)
return 0;
}
+static int cps_pm_power_notifier(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ unsigned int stat;
+
+ switch (event) {
+ case PM_SUSPEND_PREPARE:
+ stat = read_cpc_cl_stat_conf();
+ /*
+ * If we're attempting to suspend the system and power down all
+ * of the cores, the JTAG detect bit indicates that the CPC will
+ * instead put the cores into clock-off state. In this state
+ * a connected debugger can cause the CPU to attempt
+ * interactions with the powered down system. At best this will
+ * fail. At worst, it can hang the NoC, requiring a hard reset.
+ * To avoid this, just block system suspend if a JTAG probe
+ * is detected.
+ */
+ if (stat & CPC_Cx_STAT_CONF_EJTAG_PROBE) {
+ pr_warn("JTAG probe is connected - abort suspend\n");
+ return NOTIFY_BAD;
+ }
+ return NOTIFY_DONE;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
static int __init cps_pm_init(void)
{
/* A CM is required for all non-coherent states */
@@ -705,6 +734,8 @@ static int __init cps_pm_init(void)
pr_warn("pm-cps: no CPC, clock & power gating unavailable\n");
}
+ pm_notifier(cps_pm_power_notifier, 0);
+
return cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "mips/cps_pm:online",
cps_pm_online_cpu, NULL);
}
diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c
index 7c746d3458e7..6288780b779e 100644
--- a/arch/mips/kernel/reset.c
+++ b/arch/mips/kernel/reset.c
@@ -13,6 +13,9 @@
#include <linux/reboot.h>
#include <linux/delay.h>
+#include <asm/compiler.h>
+#include <asm/idle.h>
+#include <asm/mipsregs.h>
#include <asm/reboot.h>
/*
@@ -26,6 +29,62 @@ void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
+static void machine_hang(void)
+{
+ /*
+ * We're hanging the system so we don't want to be interrupted anymore.
+ * Any interrupt handlers that ran would at best be useless & at worst
+ * go awry because the system isn't in a functional state.
+ */
+ local_irq_disable();
+
+ /*
+ * Mask all interrupts, giving us a better chance of remaining in the
+ * low power wait state.
+ */
+ clear_c0_status(ST0_IM);
+
+ while (true) {
+ if (cpu_has_mips_r) {
+ /*
+ * We know that the wait instruction is supported so
+ * make use of it directly, leaving interrupts
+ * disabled.
+ */
+ asm volatile(
+ ".set push\n\t"
+ ".set " MIPS_ISA_ARCH_LEVEL "\n\t"
+ "wait\n\t"
+ ".set pop");
+ } else if (cpu_wait) {
+ /*
+ * Try the cpu_wait() callback. This isn't ideal since
+ * it'll re-enable interrupts, but that ought to be
+ * harmless given that they're all masked.
+ */
+ cpu_wait();
+ local_irq_disable();
+ } else {
+ /*
+ * We're going to burn some power running round the
+ * loop, but we don't really have a choice. This isn't
+ * a path we should expect to run for long during
+ * typical use anyway.
+ */
+ }
+
+ /*
+ * In most modern MIPS CPUs interrupts will cause the wait
+ * instruction to graduate even when disabled, and in some
+ * cases even when masked. In order to prevent a timer
+ * interrupt from continuously taking us out of the low power
+ * wait state, we clear any pending timer interrupt here.
+ */
+ if (cpu_has_counter)
+ write_c0_compare(0);
+ }
+}
+
void machine_restart(char *command)
{
if (_machine_restart)
@@ -38,8 +97,7 @@ void machine_restart(char *command)
do_kernel_restart(command);
mdelay(1000);
pr_emerg("Reboot failed -- System halted\n");
- local_irq_disable();
- while (1);
+ machine_hang();
}
void machine_halt(void)
@@ -51,8 +109,7 @@ void machine_halt(void)
preempt_disable();
smp_send_stop();
#endif
- local_irq_disable();
- while (1);
+ machine_hang();
}
void machine_power_off(void)
@@ -64,6 +121,5 @@ void machine_power_off(void)
preempt_disable();
smp_send_stop();
#endif
- local_irq_disable();
- while (1);
+ machine_hang();
}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 5f8b0a9e30b3..563188ac6fa2 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -155,7 +155,8 @@ void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_add
add_memory_region(start, size, BOOT_MEM_RAM);
}
-bool __init memory_region_available(phys_addr_t start, phys_addr_t size)
+static bool __init __maybe_unused memory_region_available(phys_addr_t start,
+ phys_addr_t size)
{
int i;
bool in_ram = false, free = true;
@@ -453,7 +454,7 @@ static void __init bootmem_init(void)
pr_info("Wasting %lu bytes for tracking %lu unused pages\n",
(min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
min_low_pfn - ARCH_PFN_OFFSET);
- } else if (min_low_pfn < ARCH_PFN_OFFSET) {
+ } else if (ARCH_PFN_OFFSET - min_low_pfn > 0UL) {
pr_info("%lu free pages won't be used\n",
ARCH_PFN_OFFSET - min_low_pfn);
}
OpenPOWER on IntegriCloud