MIPS: BMIPS: Add DTS files for several platforms

Most of the supported chips use legacy (non-DT) bootloaders, so they will
need to select an appropriate builtin DTB at compile time until the
bootloader is updated.  Provide suitable DTS files, and a means to compile
one of them into the kernel image.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: f.fainelli@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8858/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 108 insertions, 0 deletions

diff --git a/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi
new file mode 100644
index 000000000000..aa406b43c65f
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi
@@ -0,0 +1,108 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm3384-viper", "brcm,bcm33843-viper";
+
+	memory@0 {
+		device_type = "memory";
+
+		/* Typical ranges.  The bootloader should fill these in. */
+		reg = <0x06000000 0x02000000>,
+		      <0x0e000000 0x02000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 1/2 of the CPU core clock (standard MIPS behavior) */
+		mips-hpt-frequency = <300000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	cpu_intc: cpu_intc {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	clocks {
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <54000000>;
+		};
+	};
+
+	aliases {
+		uart0 = &uart0;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "brcm,ubus", "simple-bus";
+		ranges;
+		/* No dma-ranges on Viper. */
+
+		periph_intc: periph_intc@14e00048 {
+			compatible = "brcm,bcm3380-l2-intc";
+			reg = <0x14e00048 0x4 0x14e0004c 0x4>,
+			      <0x14e00350 0x4 0x14e00354 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <4>;
+		};
+
+		cmips_intc: cmips_intc@151f8048 {
+			compatible = "brcm,bcm3380-l2-intc";
+			reg = <0x151f8048 0x4 0x151f804c 0x4>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+			brcm,int-map-mask = <0xffffffff>;
+		};
+
+		uart0: serial@14e00520 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x14e00520 0x18>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+			clocks = <&periph_clk>;
+			status = "disabled";
+		};
+
+		ehci0: usb@15400300 {
+			compatible = "brcm,bcm3384-ehci", "generic-ehci";
+			reg = <0x15400300 0x100>;
+			big-endian;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <41>;
+			status = "disabled";
+		};
+
+		ohci0: usb@15400400 {
+			compatible = "brcm,bcm3384-ohci", "generic-ohci";
+			reg = <0x15400400 0x100>;
+			big-endian;
+			no-big-frame-no;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <40>;
+			status = "disabled";
+		};
+	};
+};