Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...

1 files changed, 0 insertions, 252 deletions

diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
deleted file mode 100644
index c9ac23b385be..000000000000
--- a/arch/arm/mach-tegra/fuse.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * arch/arm/mach-tegra/fuse.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
- *
- * Author:
- *	Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/random.h>
-#include <linux/clk.h>
-#include <linux/tegra-soc.h>
-
-#include "fuse.h"
-#include "iomap.h"
-#include "apbio.h"
-
-/* Tegra20 only */
-#define FUSE_UID_LOW		0x108
-#define FUSE_UID_HIGH		0x10c
-
-/* Tegra30 and later */
-#define FUSE_VENDOR_CODE	0x200
-#define FUSE_FAB_CODE		0x204
-#define FUSE_LOT_CODE_0		0x208
-#define FUSE_LOT_CODE_1		0x20c
-#define FUSE_WAFER_ID		0x210
-#define FUSE_X_COORDINATE	0x214
-#define FUSE_Y_COORDINATE	0x218
-
-#define FUSE_SKU_INFO		0x110
-
-#define TEGRA20_FUSE_SPARE_BIT		0x200
-#define TEGRA30_FUSE_SPARE_BIT		0x244
-
-int tegra_sku_id;
-int tegra_cpu_process_id;
-int tegra_core_process_id;
-int tegra_chip_id;
-int tegra_cpu_speedo_id;		/* only exist in Tegra30 and later */
-int tegra_soc_speedo_id;
-enum tegra_revision tegra_revision;
-
-static struct clk *fuse_clk;
-static int tegra_fuse_spare_bit;
-static void (*tegra_init_speedo_data)(void);
-
-/* The BCT to use at boot is specified by board straps that can be read
- * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
- */
-int tegra_bct_strapping;
-
-#define STRAP_OPT 0x008
-#define GMI_AD0 (1 << 4)
-#define GMI_AD1 (1 << 5)
-#define RAM_ID_MASK (GMI_AD0 | GMI_AD1)
-#define RAM_CODE_SHIFT 4
-
-static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
-	[TEGRA_REVISION_UNKNOWN] = "unknown",
-	[TEGRA_REVISION_A01]     = "A01",
-	[TEGRA_REVISION_A02]     = "A02",
-	[TEGRA_REVISION_A03]     = "A03",
-	[TEGRA_REVISION_A03p]    = "A03 prime",
-	[TEGRA_REVISION_A04]     = "A04",
-};
-
-static void tegra_fuse_enable_clk(void)
-{
-	if (IS_ERR(fuse_clk))
-		fuse_clk = clk_get_sys(NULL, "fuse");
-	if (IS_ERR(fuse_clk))
-		return;
-	clk_prepare_enable(fuse_clk);
-}
-
-static void tegra_fuse_disable_clk(void)
-{
-	if (IS_ERR(fuse_clk))
-		return;
-	clk_disable_unprepare(fuse_clk);
-}
-
-u32 tegra_fuse_readl(unsigned long offset)
-{
-	return tegra_apb_readl(TEGRA_FUSE_BASE + offset);
-}
-
-bool tegra_spare_fuse(int bit)
-{
-	bool ret;
-
-	tegra_fuse_enable_clk();
-
-	ret = tegra_fuse_readl(tegra_fuse_spare_bit + bit * 4);
-
-	tegra_fuse_disable_clk();
-
-	return ret;
-}
-
-static enum tegra_revision tegra_get_revision(u32 id)
-{
-	u32 minor_rev = (id >> 16) & 0xf;
-
-	switch (minor_rev) {
-	case 1:
-		return TEGRA_REVISION_A01;
-	case 2:
-		return TEGRA_REVISION_A02;
-	case 3:
-		if (tegra_chip_id == TEGRA20 &&
-			(tegra_spare_fuse(18) || tegra_spare_fuse(19)))
-			return TEGRA_REVISION_A03p;
-		else
-			return TEGRA_REVISION_A03;
-	case 4:
-		return TEGRA_REVISION_A04;
-	default:
-		return TEGRA_REVISION_UNKNOWN;
-	}
-}
-
-static void tegra_get_process_id(void)
-{
-	u32 reg;
-
-	tegra_fuse_enable_clk();
-
-	reg = tegra_fuse_readl(tegra_fuse_spare_bit);
-	tegra_cpu_process_id = (reg >> 6) & 3;
-	reg = tegra_fuse_readl(tegra_fuse_spare_bit);
-	tegra_core_process_id = (reg >> 12) & 3;
-
-	tegra_fuse_disable_clk();
-}
-
-u32 tegra_read_chipid(void)
-{
-	return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
-}
-
-static void __init tegra20_fuse_init_randomness(void)
-{
-	u32 randomness[2];
-
-	randomness[0] = tegra_fuse_readl(FUSE_UID_LOW);
-	randomness[1] = tegra_fuse_readl(FUSE_UID_HIGH);
-
-	add_device_randomness(randomness, sizeof(randomness));
-}
-
-/* Applies to Tegra30 or later */
-static void __init tegra30_fuse_init_randomness(void)
-{
-	u32 randomness[7];
-
-	randomness[0] = tegra_fuse_readl(FUSE_VENDOR_CODE);
-	randomness[1] = tegra_fuse_readl(FUSE_FAB_CODE);
-	randomness[2] = tegra_fuse_readl(FUSE_LOT_CODE_0);
-	randomness[3] = tegra_fuse_readl(FUSE_LOT_CODE_1);
-	randomness[4] = tegra_fuse_readl(FUSE_WAFER_ID);
-	randomness[5] = tegra_fuse_readl(FUSE_X_COORDINATE);
-	randomness[6] = tegra_fuse_readl(FUSE_Y_COORDINATE);
-
-	add_device_randomness(randomness, sizeof(randomness));
-}
-
-void __init tegra_init_fuse(void)
-{
-	u32 id;
-	u32 randomness[5];
-
-	u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
-	reg |= 1 << 28;
-	writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
-
-	/*
-	 * Enable FUSE clock. This needs to be hardcoded because the clock
-	 * subsystem is not active during early boot.
-	 */
-	reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x14));
-	reg |= 1 << 7;
-	writel(reg, IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x14));
-	fuse_clk = ERR_PTR(-EINVAL);
-
-	reg = tegra_fuse_readl(FUSE_SKU_INFO);
-	randomness[0] = reg;
-	tegra_sku_id = reg & 0xFF;
-
-	reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
-	randomness[1] = reg;
-	tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
-
-	id = tegra_read_chipid();
-	randomness[2] = id;
-	tegra_chip_id = (id >> 8) & 0xff;
-
-	switch (tegra_chip_id) {
-	case TEGRA20:
-		tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
-		tegra_init_speedo_data = &tegra20_init_speedo_data;
-		break;
-	case TEGRA30:
-		tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT;
-		tegra_init_speedo_data = &tegra30_init_speedo_data;
-		break;
-	case TEGRA114:
-		tegra_init_speedo_data = &tegra114_init_speedo_data;
-		break;
-	default:
-		pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id);
-		tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
-		tegra_init_speedo_data = &tegra_get_process_id;
-	}
-
-	tegra_revision = tegra_get_revision(id);
-	tegra_init_speedo_data();
-	randomness[3] = (tegra_cpu_process_id << 16) | tegra_core_process_id;
-	randomness[4] = (tegra_cpu_speedo_id << 16) | tegra_soc_speedo_id;
-
-	add_device_randomness(randomness, sizeof(randomness));
-	switch (tegra_chip_id) {
-	case TEGRA20:
-		tegra20_fuse_init_randomness();
-		break;
-	case TEGRA30:
-	case TEGRA114:
-	default:
-		tegra30_fuse_init_randomness();
-		break;
-	}
-
-	pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
-		tegra_revision_name[tegra_revision],
-		tegra_sku_id, tegra_cpu_process_id,
-		tegra_core_process_id);
-}