Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits)
  ARM: 7004/1: fix traps.h compile warnings
  ARM: 6998/2: kernel: use proper memory barriers for bitops
  ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM
  ARM: Fix build errors caused by adding generic macros
  ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU
  ARM: CPU hotplug: pass in proper affinity mask on IRQ migration
  ARM: GIC: avoid routing interrupts to offline CPUs
  ARM: CPU hotplug: fix abuse of irqdesc->node
  ARM: 6981/2: mmci: adjust calculation of f_min
  ARM: 7000/1: LPAE: Use long long printk format for displaying the pud
  ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state
  ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence
  ARM: ARM_DMA_ZONE_SIZE is no more
  ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ...

10 files changed, 40 insertions, 59 deletions

diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index a10996782476..bc55d07566ca 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -518,4 +518,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 	.init_irq	= cmx2xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cmx2xx_init,
+#ifdef CONFIG_PCI
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index 07734f37f8fd..d05a59727d66 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -17,8 +17,4 @@
  */
 #define PLAT_PHYS_OFFSET	UL(0xa0000000)
 
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define ARM_DMA_ZONE_SIZE	SZ_64M
-#endif
-
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
index f15afe012995..51558bcee999 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns {
 extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
 
 /* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int, long);
-extern void pxa27x_cpu_suspend(unsigned int, long);
+extern int pxa25x_finish_suspend(unsigned long);
+extern int pxa27x_finish_suspend(unsigned long);
 
 extern int pxa_pm_enter(suspend_state_t state);
 extern int pxa_pm_prepare(void);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 65f24f0b77e8..5a5329bc33f1 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -33,6 +33,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
+#include <asm/suspend.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 51e1583265b2..37178a8559b1 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -42,7 +42,6 @@ int pxa_pm_enter(suspend_state_t state)
 
 	/* *** go zzz *** */
 	pxa_cpu_pm_fns->enter(state);
-	cpu_init();
 
 	if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
 		/* after sleeping, validate the checksum */
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index fed363cec9c6..9c434d21a271 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,6 +25,7 @@
 #include <linux/irq.h>
 
 #include <asm/mach/map.h>
+#include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
@@ -244,7 +245,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
 
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+		cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 2fecbec58d88..9d2400b5f503 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -24,6 +24,7 @@
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/suspend.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <mach/pxa27x.h>
@@ -284,6 +285,11 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
 	extern void pxa_cpu_standby(void);
+#ifndef CONFIG_IWMMXT
+	u64 acc0;
+
+	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
 	PCFR &= ~PCFR_FVC;
@@ -299,7 +305,10 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+		cpu_suspend(pwrmode, pxa27x_finish_suspend);
+#ifndef CONFIG_IWMMXT
+		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
 		break;
 	}
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 8521d7d6f1da..ef1c56a67afc 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/pxa-i2c.h>
 
 #include <asm/mach/map.h>
+#include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <mach/pxa3xx-regs.h>
@@ -141,8 +142,13 @@ static void pxa3xx_cpu_pm_suspend(void)
 {
 	volatile unsigned long *p = (volatile void *)0xc0000000;
 	unsigned long saved_data = *p;
+#ifndef CONFIG_IWMMXT
+	u64 acc0;
 
-	extern void pxa3xx_cpu_suspend(long);
+	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
+
+	extern int pxa3xx_finish_suspend(unsigned long);
 
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
@@ -162,11 +168,15 @@ static void pxa3xx_cpu_pm_suspend(void)
 	/* overwrite with the resume address */
 	*p = virt_to_phys(cpu_resume);
 
-	pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
+	cpu_suspend(0, pxa3xx_finish_suspend);
 
 	*p = saved_data;
 
 	AD3ER = 0;
+
+#ifndef CONFIG_IWMMXT
+	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
 }
 
 static void pxa3xx_cpu_pm_enter(suspend_state_t state)
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 6f5368899d84..1e544be9905d 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -24,20 +24,9 @@
 
 #ifdef CONFIG_PXA3xx
 /*
- * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
- *
- * r0 = v:p offset
+ * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
  */
-ENTRY(pxa3xx_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
-	mra	r2, r3, acc0
-#endif
-	stmfd	sp!, {r2 - r12, lr}	@ save registers on stack
-	mov	r1, r0
-	ldr	r3, =pxa_cpu_resume	@ resume function
-	bl	cpu_suspend
-
+ENTRY(pxa3xx_finish_suspend)
 	mov	r0, #0x06		@ S2D3C4 mode
 	mcr	p14, 0, r0, c7, c0, 0	@ enter sleep
 
@@ -46,28 +35,18 @@ ENTRY(pxa3xx_cpu_suspend)
 
 #ifdef CONFIG_PXA27x
 /*
- * pxa27x_cpu_suspend()
+ * pxa27x_finish_suspend()
  *
  * Forces CPU into sleep state.
  *
  * r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
  */
-ENTRY(pxa27x_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
-	mra	r2, r3, acc0
-#endif
-	stmfd	sp!, {r2 - r12, lr}		@ save registers on stack
-	mov	r4, r0				@ save sleep mode
-	ldr	r3, =pxa_cpu_resume		@ resume function
-	bl	cpu_suspend
-
+ENTRY(pxa27x_finish_suspend)
 	@ Put the processor to sleep
 	@ (also workaround for sighting 28071)
 
 	@ prepare value for sleep mode
-	mov	r1, r4				@ sleep mode
+	mov	r1, r0				@ sleep mode
 
 	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
 	mov	r2, #UNCACHED_PHYS_0
@@ -99,21 +78,16 @@ ENTRY(pxa27x_cpu_suspend)
 
 #ifdef CONFIG_PXA25x
 /*
- * pxa25x_cpu_suspend()
+ * pxa25x_finish_suspend()
  *
  * Forces CPU into sleep state.
  *
  * r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
  */
 
-ENTRY(pxa25x_cpu_suspend)
-	stmfd	sp!, {r2 - r12, lr}		@ save registers on stack
-	mov	r4, r0				@ save sleep mode
-	ldr	r3, =pxa_cpu_resume		@ resume function
-	bl	cpu_suspend
+ENTRY(pxa25x_finish_suspend)
 	@ prepare value for sleep mode
-	mov	r1, r4				@ sleep mode
+	mov	r1, r0				@ sleep mode
 
 	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
 	mov	r2, #UNCACHED_PHYS_0
@@ -195,16 +169,3 @@ pxa_cpu_do_suspend:
 	mcr	p14, 0, r1, c7, c0, 0		@ PWRMODE
 
 20:	b	20b				@ loop waiting for sleep
-
-/*
- * pxa_cpu_resume()
- *
- * entry point from bootloader into kernel during resume
- */
-	.align 5
-pxa_cpu_resume:
-	ldmfd	sp!, {r2, r3}
-#ifndef CONFIG_IWMMXT
-	mar	acc0, r2, r3
-#endif
-	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 00363c7ac182..9b99cc164de5 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -31,6 +31,7 @@
 #include <linux/can/platform/mcp251x.h>
 
 #include <asm/mach-types.h>
+#include <asm/suspend.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -676,7 +677,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
 static void zeus_power_off(void)
 {
 	local_irq_disable();
-	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
 }
 #else
 #define zeus_power_off   NULL