ARM: kirkwood: Add support for the MPL CEC4

Signed-off-by: Stefan Peter <s.peter@mpl.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 80 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
new file mode 100644
index 000000000000..e78a227468e6
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2012 MPL AG, Switzerland
+ * Stefan Peter <s.peter@mpl.ch>
+ *
+ * arch/arm/mach-kirkwood/board-mplcec4.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/platform_data/mmc-mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
+};
+
+static unsigned int mplcec4_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,	/* Status LED Green High Active */
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_SD_CLK,
+	MPP13_SD_CMD,	/* Alt UART1_TXD */
+	MPP14_SD_D0,	/* Alt UART1_RXD */
+	MPP15_SD_D1,
+	MPP16_SD_D2,
+	MPP17_SD_D3,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP28_GPIO,	/* Input SYS_POR_DET (active High) */
+	MPP29_GPIO,	/* Input SYS_RTC_INT (active High) */
+	MPP34_SATA1_ACTn,
+	MPP35_SATA0_ACTn,
+	MPP40_GPIO,	/* LED User1 orange */
+	MPP41_GPIO,	/* LED User1 green */
+	MPP44_GPIO,	/* LED User0 orange */
+	MPP45_GPIO,	/* LED User0 green */
+	MPP46_GPIO,	/* Status LED Yellow High Active */
+	MPP47_GPIO,	/* SD_CD# (in/IRQ)*/
+	0
+};
+
+
+static struct mvsdio_platform_data mplcec4_mvsdio_data = {
+	.gpio_card_detect = 47,	/* MPP47 used as SD card detect */
+};
+
+
+
+void __init mplcec4_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(mplcec4_mpp_config);
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&mplcec4_ge00_data);
+	kirkwood_ge01_init(&mplcec4_ge01_data);
+	kirkwood_sdio_init(&mplcec4_mvsdio_data);
+	kirkwood_pcie_init(KW_PCIE0);
+}
+
+
+