summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx/mach-imx6q.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:02:18 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:02:18 -0700
commitfcba914542082b272f31c8e4c40000b88ed3208d (patch)
treefb28069bf571d93420daafd501b4e97f221d526c /arch/arm/mach-imx/mach-imx6q.c
parenta8c4b90e670be3b01e9395c7310639c8109fc77e (diff)
parent5c5f0421a8eea5bdaba9b9313c5bb4833aeb39cd (diff)
downloadtalos-obmc-linux-fcba914542082b272f31c8e4c40000b88ed3208d.tar.gz
talos-obmc-linux-fcba914542082b272f31c8e4c40000b88ed3208d.zip
Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
Diffstat (limited to 'arch/arm/mach-imx/mach-imx6q.c')
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c74
1 files changed, 25 insertions, 49 deletions
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 99502eeefdf7..5536fd81379a 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
@@ -38,38 +38,32 @@
#include "cpuidle.h"
#include "hardware.h"
-#define IMX6Q_ANALOG_DIGPROG 0x260
+static u32 chip_revision;
-static int imx6q_revision(void)
+int imx6q_revision(void)
{
- struct device_node *np;
- void __iomem *base;
- static u32 rev;
-
- if (!rev) {
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
- if (!np)
- return IMX_CHIP_REVISION_UNKNOWN;
- base = of_iomap(np, 0);
- if (!base) {
- of_node_put(np);
- return IMX_CHIP_REVISION_UNKNOWN;
- }
- rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
- iounmap(base);
- of_node_put(np);
- }
+ return chip_revision;
+}
+
+static void __init imx6q_init_revision(void)
+{
+ u32 rev = imx_anatop_get_digprog();
switch (rev & 0xff) {
case 0:
- return IMX_CHIP_REVISION_1_0;
+ chip_revision = IMX_CHIP_REVISION_1_0;
+ break;
case 1:
- return IMX_CHIP_REVISION_1_1;
+ chip_revision = IMX_CHIP_REVISION_1_1;
+ break;
case 2:
- return IMX_CHIP_REVISION_1_2;
+ chip_revision = IMX_CHIP_REVISION_1_2;
+ break;
default:
- return IMX_CHIP_REVISION_UNKNOWN;
+ chip_revision = IMX_CHIP_REVISION_UNKNOWN;
}
+
+ mxc_set_cpu_type(rev >> 16 & 0xff);
}
static void imx6q_restart(char mode, const char *cmd)
@@ -164,29 +158,7 @@ static void __init imx6q_1588_init(void)
}
static void __init imx6q_usb_init(void)
{
- struct regmap *anatop;
-
-#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0
-#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210
-
-#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000
-#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000
-
- anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
- if (!IS_ERR(anatop)) {
- /*
- * The external charger detector needs to be disabled,
- * or the signal at DP will be poor
- */
- regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT,
- BM_ANADIG_USB_CHRG_DETECT_EN_B
- | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
- regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT,
- BM_ANADIG_USB_CHRG_DETECT_EN_B |
- BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
- } else {
- pr_warn("failed to find fsl,imx6q-anatop regmap\n");
- }
+ imx_anatop_usb_chrg_detect_disable();
}
static void __init imx6q_init_machine(void)
@@ -196,6 +168,7 @@ static void __init imx6q_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ imx_anatop_init();
imx6q_pm_init();
imx6q_usb_init();
imx6q_1588_init();
@@ -282,6 +255,7 @@ static void __init imx6q_map_io(void)
static void __init imx6q_init_irq(void)
{
+ imx6q_init_revision();
l2x0_of_init(0, ~0UL);
imx_src_init();
imx_gpc_init();
@@ -292,15 +266,17 @@ static void __init imx6q_timer_init(void)
{
mx6q_clocks_init();
clocksource_of_init();
- imx_print_silicon_rev("i.MX6Q", imx6q_revision());
+ imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+ imx6q_revision());
}
static const char *imx6q_dt_compat[] __initdata = {
+ "fsl,imx6dl",
"fsl,imx6q",
NULL,
};
-DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
.smp = smp_ops(imx_smp_ops),
.map_io = imx6q_map_io,
.init_irq = imx6q_init_irq,
OpenPOWER on IntegriCloud