Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

1 files changed, 160 insertions, 32 deletions

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 9ef4438206a9..f0f6fb91f8c3 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -47,7 +47,11 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton64.dtsi"
+#include "skeleton64.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -205,11 +209,50 @@
 			clock-output-names = "cci400";
 		};
 
+		mmc0_clk: clk@06000410 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000410 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc0", "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@06000414 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000414 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc1", "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@06000418 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000418 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc2", "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk@0600041c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x0600041c 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc3", "mmc3_output",
+					     "mmc3_sample";
+		};
+
 		ahb0_gates: clk@06000580 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
 			reg = <0x06000580 0x4>;
 			clocks = <&ahb0>;
+			clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
+					<14>, <15>, <16>, <18>, <20>, <21>,
+					<22>, <23>;
 			clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
 					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
 					"ahb0_nand0", "ahb0_sdram",
@@ -223,6 +266,7 @@
 			compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
 			reg = <0x06000584 0x4>;
 			clocks = <&ahb1>;
+			clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
 			clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
 					"ahb1_gmac", "ahb1_msgbox",
 					"ahb1_spinlock", "ahb1_hstimer",
@@ -234,6 +278,8 @@
 			compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
 			reg = <0x06000588 0x4>;
 			clocks = <&ahb2>;
+			clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
+					<11>;
 			clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
 					"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
 					"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
@@ -244,6 +290,8 @@
 			compatible = "allwinner,sun9i-a80-apb0-gates-clk";
 			reg = <0x06000590 0x4>;
 			clocks = <&apb0>;
+			clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
+					<17>, <18>, <19>;
 			clock-output-names = "apb0_spdif", "apb0_pio",
 					"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
 					"apb0_lradc", "apb0_gpadc", "apb0_twd",
@@ -255,6 +303,8 @@
 			compatible = "allwinner,sun9i-a80-apb1-gates-clk";
 			reg = <0x06000594 0x4>;
 			clocks = <&apb1>;
+			clock-indices = <0>, <1>, <2>, <3>, <4>,
+					<16>, <17>, <18>, <19>, <20>, <21>;
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
 					"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
 					"apb1_uart0", "apb1_uart1",
@@ -273,6 +323,67 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
+				 <&mmc0_clk 1>, <&mmc0_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
+				 <&mmc1_clk 1>, <&mmc1_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
+				 <&mmc2_clk 1>, <&mmc2_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
+				 <&mmc3_clk 1>, <&mmc3_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc_config_clk: clk@01c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ahb0_gates 8>;
+			clock-names = "ahb";
+			resets = <&ahb0_resets 8>;
+			reset-names = "ahb";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
 		gic: interrupt-controller@01c41000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c41000 0x1000>,
@@ -281,7 +392,7 @@
 			      <0x01c46000 0x2000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		ahb0_resets: reset@060005a0 {
@@ -317,12 +428,12 @@
 		timer@06000c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x06000c00 0xa0>;
-			interrupts = <0 18 4>,
-				     <0 19 4>,
-				     <0 20 4>,
-				     <0 21 4>,
-				     <0 22 4>,
-				     <0 23 4>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&osc24M>;
 		};
@@ -330,11 +441,11 @@
 		pio: pinctrl@06000800 {
 			compatible = "allwinner,sun9i-a80-pinctrl";
 			reg = <0x06000800 0x400>;
-			interrupts = <0 11 4>,
-				     <0 15 4>,
-				     <0 16 4>,
-				     <0 17 4>,
-				     <0 120 4>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -345,29 +456,46 @@
 			i2c3_pins_a: i2c3@0 {
 				allwinner,pins = "PG10", "PG11";
 				allwinner,function = "i2c3";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins: mmc0 {
+				allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PH12", "PH13";
 				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			uart4_pins_a: uart4@0 {
 				allwinner,pins = "PG12", "PG13", "PG14", "PG15";
 				allwinner,function = "uart4";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
 		uart0: serial@07000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07000000 0x400>;
-			interrupts = <0 0 4>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 16>;
@@ -378,7 +506,7 @@
 		uart1: serial@07000400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07000400 0x400>;
-			interrupts = <0 1 4>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 17>;
@@ -389,7 +517,7 @@
 		uart2: serial@07000800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07000800 0x400>;
-			interrupts = <0 2 4>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 18>;
@@ -400,7 +528,7 @@
 		uart3: serial@07000c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07000c00 0x400>;
-			interrupts = <0 3 4>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 19>;
@@ -411,7 +539,7 @@
 		uart4: serial@07001000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07001000 0x400>;
-			interrupts = <0 4 4>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 20>;
@@ -422,7 +550,7 @@
 		uart5: serial@07001400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x07001400 0x400>;
-			interrupts = <0 5 4>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 21>;
@@ -433,7 +561,7 @@
 		i2c0: i2c@07002800 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07002800 0x400>;
-			interrupts = <0 6 4>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 0>;
 			resets = <&apb1_resets 0>;
 			status = "disabled";
@@ -444,7 +572,7 @@
 		i2c1: i2c@07002c00 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07002c00 0x400>;
-			interrupts = <0 7 4>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 1>;
 			resets = <&apb1_resets 1>;
 			status = "disabled";
@@ -455,7 +583,7 @@
 		i2c2: i2c@07003000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003000 0x400>;
-			interrupts = <0 8 4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 2>;
 			resets = <&apb1_resets 2>;
 			status = "disabled";
@@ -466,7 +594,7 @@
 		i2c3: i2c@07003400 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003400 0x400>;
-			interrupts = <0 9 4>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 3>;
 			resets = <&apb1_resets 3>;
 			status = "disabled";
@@ -477,7 +605,7 @@
 		i2c4: i2c@07003800 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07003800 0x400>;
-			interrupts = <0 10 4>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 4>;
 			resets = <&apb1_resets 4>;
 			status = "disabled";
@@ -488,13 +616,13 @@
 		r_wdt: watchdog@08001000 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x08001000 0x20>;
-			interrupts = <0 36 4>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		r_uart: serial@08002800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x08002800 0x400>;
-			interrupts = <0 38 4>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&osc24M>;