Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

1 files changed, 47 insertions, 11 deletions

diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 6a310da53f18..4260c2b47607 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -47,8 +47,11 @@
  */
 
 /dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "Cubietech Cubieboard";
@@ -75,7 +78,7 @@
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
 			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
 			cd-inverted;
 			status = "okay";
 		};
@@ -111,8 +114,8 @@
 			led_pins_cubieboard: led_pins@0 {
 				allwinner,pins = "PH20", "PH21";
 				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 
@@ -134,12 +137,8 @@
 			status = "okay";
 
 			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
 				reg = <0x34>;
 				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
 			};
 		};
 
@@ -148,6 +147,12 @@
 			pinctrl-0 = <&i2c1_pins_a>;
 			status = "okay";
 		};
+
+		spi0: spi@01c05000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins_a>;
+			status = "okay";
+		};
 	};
 
 	leds {
@@ -157,12 +162,12 @@
 
 		blue {
 			label = "cubieboard:blue:usr";
-			gpios = <&pio 7 21 0>; /* LED1 */
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
 		};
 
 		green {
 			label = "cubieboard:green:usr";
-			gpios = <&pio 7 20 0>; /* LED2 */
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -179,3 +184,34 @@
 		status = "okay";
 	};
 };
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};