diff options
| author | Bjorn Andersson <bjorn.andersson@linaro.org> | 2016-08-16 10:46:30 -0700 |
|---|---|---|
| committer | Andy Gross <andy.gross@linaro.org> | 2016-09-02 13:48:18 -0500 |
| commit | e286492e4d3f1f1d561850ed8829233d679873e0 (patch) | |
| tree | 94c80feb24a6656b6254c8d0c3afea58c08f6391 /arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | |
| parent | c03a4b24c355bce7758d75ca3a7aad18a8cbefa2 (diff) | |
| download | talos-obmc-linux-e286492e4d3f1f1d561850ed8829233d679873e0.tar.gz talos-obmc-linux-e286492e4d3f1f1d561850ed8829233d679873e0.zip | |
ARM: dts: msm8974: honami: Add touchscreen
Add the i2c2 and rmi4 nodes to enable the Synaptics touchscreen found in
the Honami.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 59 |
1 files changed, 59 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 3fb4dada6b0d..0d414ef9d3d0 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -311,6 +311,45 @@ pinctrl-0 = <&blsp1_uart2_pin_a>; }; + i2c@f9924000 { + status = "ok"; + + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; + }; + pinctrl@fd510000 { blsp1_uart2_pin_a: blsp1-uart2-pin-active { rx { @@ -330,6 +369,16 @@ }; }; + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + sdhc1_pin_a: sdhc1-pin-active { clk { pins = "sdc1_clk"; @@ -366,6 +415,16 @@ }; }; + ts_int_pin: touch-int { + pin { + pins = "gpio61"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; }; dma-controller@f9944000 { |
