ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2

Almost all hardware parts of the NETGEAR ReadyNAS NV+ v2 ([1] for more
details) are supported by mainline kernel. The only missing elements in
provided .dts file are:

 - the front LCD module (Winstar WINSTAR WH1602): driver development is
   ongoing. This is the same LCD module as on ReadyNAS 104.
 - the Macronix MX25L512 512Kbit SPI flash: no time to play with it yet.

The device is the big brother (4 vs 2 bay) of the ReadyNAS Duo v2. The
main differences are some additional LEDs for the disks, a Marvell
88SM4140 SATA Port multiplier (no driver required to access the disk)
and previously described LCD module. Otherwise, it shares the same SoC
(kirkwood 88F6282), RAM (256MB), NAND (128MB), RTC chip (Ricoh rs5c372a),
fan controller (GMT G762), XHCI controller (NEC/Renesas µPD720200).

[1]: http://natisbad.org/NAS5/

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 270 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
new file mode 100644
index 000000000000..72a3883f6a04
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -0,0 +1,270 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS NV+ v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS NV+ v2";
+	compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to NEC uPD720200 USB 3.0 controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_backup: pmx-button-backup {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_power: pmx-led-blue-power {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_backup: pmx-led-blue-backup {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk1: pmx-led-blue-disk1 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk2: pmx-led-blue-disk2 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk3: pmx-led-blue-disk3 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk4: pmx-led-blue-disk4 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_poweroff: pmx-poweroff {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+		};
+
+		clocks {
+		       g762_clk: g762-oscillator {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rs5c372a: rs5c372a@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
+		};
+
+		serial@12000 {
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
+			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
+			      &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:blue:power_led";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		disk1_led {
+			label = "status:blue:disk1_led";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		disk2_led {
+			label = "status:blue:disk2_led";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		disk3_led {
+			label = "status:blue:disk3_led";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		disk4_led {
+			label = "status:blue:disk4_led";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power &pmx_button_backup
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};