summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-03-07 15:56:25 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2010-03-07 15:56:25 -0800
commitdd04265b028c00c365a78f9ff78a05e217f98656 (patch)
tree4df2ce8ca3a2b8fcf5742718ecb90abe68666ffb /Documentation
parent6dc3eb5c1f96641cda7056aa34393e317076d6cf (diff)
parent3f4ae8605261e6f71e721e026bc18cb1851a7276 (diff)
downloadtalos-obmc-linux-dd04265b028c00c365a78f9ff78a05e217f98656.tar.gz
talos-obmc-linux-dd04265b028c00c365a78f9ff78a05e217f98656.zip
Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux: i2c: Add support for Xilinx XPS IIC Bus Interface i2c: omap: Add support for 16-bit registers i2c-pnx: fix setting start/stop condition powerpc: doc/dts-bindings: update doc of FSL I2C bindings i2c-mpc: add support for the MPC512x processors from Freescale i2c-mpc: rename "setclock" initialization functions to "setup" i2c-mpc: use __devinit[data] for initialization functions and data i2c/imx: don't add probe function to the driver struct i2c: Add support for Ux500/Nomadik I2C controller
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/i2c.txt30
1 files changed, 22 insertions, 8 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index b6d2e21474f9..50da20310585 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -2,15 +2,14 @@
Required properties :
- - device_type : Should be "i2c"
- reg : Offset and length of the register set for the device
+ - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
+ compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
+ mpc5200 or mpc5200b. For the mpc5121, an additional node
+ "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
Recommended properties :
- - compatible : compatibility list with 2 entries, the first should
- be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
- e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
- should be "fsl-i2c".
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
@@ -24,25 +23,40 @@ Recommended properties :
Examples :
+ /* MPC5121 based board */
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <100000>;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ /* MPC5200B based board */
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <0>;
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,preserve-clocking;
};
+ /* MPC8544 base board */
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
- cell-index = <1>;
compatible = "fsl,mpc8544-i2c", "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
clock-frequency = <400000>;
};
-
OpenPOWER on IntegriCloud