summaryrefslogtreecommitdiffstats
path: root/Documentation/leds
diff options
context:
space:
mode:
authorJan-Simon Möller <jansimon.moeller@gmx.de>2012-07-20 16:49:06 +0800
committerBryan Wu <bryan.wu@canonical.com>2012-07-24 16:00:51 +0800
commitb54cf35a7f656c61dd695509e8cf8cc7e1dc3e53 (patch)
tree1a05f14876c2b783b762f448f48b4b3586861354 /Documentation/leds
parenteb18618b8018bffad6e62f1bc40e4e0c7ee2fa19 (diff)
downloadtalos-obmc-linux-b54cf35a7f656c61dd695509e8cf8cc7e1dc3e53.tar.gz
talos-obmc-linux-b54cf35a7f656c61dd695509e8cf8cc7e1dc3e53.zip
LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS
Add driver for BlinkM device to drivers/leds/. Add entry to MAINTAINERS file. Add documentation in Documentation/leds/. A BlinkM is a RGB LED controlled through I2C. This driver implements an interface to the LED framework and another sysfs group to access the internal options of the BlinkM. rev6: Use module_i2c_driver(). rev5: Removed own workqueue in favor of events wq. rev4: Fixed comments by Bryan Wu. rev3: Fixed issues found by Jonathan Neuschäfer. (bryan.wu@canonical.com: remove 2 trailing whitespace) Signed-off-by: Jan-Simon Möller <jansimon.moeller@gmx.de> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Diffstat (limited to 'Documentation/leds')
-rw-r--r--Documentation/leds/leds-blinkm.txt80
1 files changed, 80 insertions, 0 deletions
diff --git a/Documentation/leds/leds-blinkm.txt b/Documentation/leds/leds-blinkm.txt
new file mode 100644
index 000000000000..9dd92f4cf4e1
--- /dev/null
+++ b/Documentation/leds/leds-blinkm.txt
@@ -0,0 +1,80 @@
+The leds-blinkm driver supports the devices of the BlinkM family.
+
+They are RGB-LED modules driven by a (AT)tiny microcontroller and
+communicate through I2C. The default address of these modules is
+0x09 but this can be changed through a command. By this you could
+dasy-chain up to 127 BlinkMs on an I2C bus.
+
+The device accepts RGB and HSB color values through separate commands.
+Also you can store blinking sequences as "scripts" in
+the controller and run them. Also fading is an option.
+
+The interface this driver provides is 2-fold:
+
+a) LED class interface for use with triggers
+############################################
+
+The registration follows the scheme:
+blinkm-<i2c-bus-nr>-<i2c-device-nr>-<color>
+
+$ ls -h /sys/class/leds/blinkm-6-*
+/sys/class/leds/blinkm-6-9-blue:
+brightness device max_brightness power subsystem trigger uevent
+
+/sys/class/leds/blinkm-6-9-green:
+brightness device max_brightness power subsystem trigger uevent
+
+/sys/class/leds/blinkm-6-9-red:
+brightness device max_brightness power subsystem trigger uevent
+
+(same is /sys/bus/i2c/devices/6-0009/leds)
+
+We can control the colors separated into red, green and blue and
+assign triggers on each color.
+
+E.g.:
+
+$ cat blinkm-6-9-blue/brightness
+05
+
+$ echo 200 > blinkm-6-9-blue/brightness
+$
+
+$ modprobe ledtrig-heartbeat
+$ echo heartbeat > blinkm-6-9-green/trigger
+$
+
+
+b) Sysfs group to control rgb, fade, hsb, scripts ...
+#####################################################
+
+This extended interface is available as folder blinkm
+in the sysfs folder of the I2C device.
+E.g. below /sys/bus/i2c/devices/6-0009/blinkm
+
+$ ls -h /sys/bus/i2c/devices/6-0009/blinkm/
+blue green red test
+
+Currently supported is just setting red, green, blue
+and a test sequence.
+
+E.g.:
+
+$ cat *
+00
+00
+00
+#Write into test to start test sequence!#
+
+$ echo 1 > test
+$
+
+$ echo 255 > red
+$
+
+
+
+as of 6/2012
+
+dl9pf <at> gmx <dot> de
+
OpenPOWER on IntegriCloud