Merge branch 'master' into for-next

Merge with latest Linus' tree, as I have incoming patches
that fix code that is newer than current HEAD of for-next.

Conflicts:
	drivers/net/ethernet/realtek/r8169.c

13 files changed, 181 insertions, 63 deletions

diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index e5f982c845fd..2cfa25667123 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -2,6 +2,10 @@ Kernel driver adm1275
 =====================
 
 Supported chips:
+  * Analog Devices ADM1075
+    Prefix: 'adm1075'
+    Addresses scanned: -
+    Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
   * Analog Devices ADM1275
     Prefix: 'adm1275'
     Addresses scanned: -
@@ -17,13 +21,13 @@ Author: Guenter Roeck <guenter.roeck@ericsson.com>
 Description
 -----------
 
-This driver supports hardware montoring for Analog Devices ADM1275 and ADM1276
-Hot-Swap Controller and Digital Power Monitor.
+This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
+and ADM1276 Hot-Swap Controller and Digital Power Monitor.
 
-ADM1275 and ADM1276 are hot-swap controllers that allow a circuit board to be
-removed from or inserted into a live backplane. They also feature current and
-voltage readback via an integrated 12-bit analog-to-digital converter (ADC),
-accessed using a PMBus interface.
+ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
+board to be removed from or inserted into a live backplane. They also feature
+current and voltage readback via an integrated 12-bit analog-to-digital
+converter (ADC), accessed using a PMBus interface.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -36,6 +40,10 @@ This driver does not auto-detect devices. You will have to instantiate the
 devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
+The ADM1075, unlike many other PMBus devices, does not support internal voltage
+or current scaling. Reported voltages, currents, and power are raw measurements,
+and will typically have to be scaled.
+
 
 Platform data support
 ---------------------
@@ -51,7 +59,8 @@ The following attributes are supported. Limits are read-write, history reset
 attributes are write-only, all other attributes are read-only.
 
 in1_label		"vin1" or "vout1" depending on chip variant and
-			configuration.
+			configuration. On ADM1075, vout1 reports the voltage on
+			the VAUX pin.
 in1_input		Measured voltage.
 in1_min			Minimum Voltage.
 in1_max			Maximum voltage.
@@ -74,3 +83,10 @@ curr1_crit		Critical maximum current. Depending on the chip
 curr1_crit_alarm	Critical current high alarm.
 curr1_highest		Historical maximum current.
 curr1_reset_history	Write any value to reset history.
+
+power1_label		"pin1"
+power1_input		Input power.
+power1_reset_history	Write any value to reset history.
+
+			Power attributes are supported on ADM1075 and ADM1276
+			only.
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index a22ecf48f255..66ecb9fc8246 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -3,57 +3,50 @@ Kernel driver jc42
 
 Supported chips:
   * Analog Devices ADT7408
-    Prefix: 'adt7408'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
-  * IDT TSE2002B3, TS3000B3
-    Prefix: 'tse2002b3', 'ts3000b3'
-    Addresses scanned: I2C 0x18 - 0x1f
+  * Atmel AT30TS00
     Datasheets:
-	http://www.idt.com/products/getdoc.cfm?docid=18715691
-	http://www.idt.com/products/getdoc.cfm?docid=18715692
+	http://www.atmel.com/Images/doc8585.pdf
+  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+    Datasheets:
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
-    Prefix: 'max6604'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
-    Addresses scanned: I2C 0x18 - 0x1f
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
     Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
-  * NXP Semiconductors SE97, SE97B
-    Prefix: 'se97'
-    Addresses scanned: I2C 0x18 - 0x1f
+  * NXP Semiconductors SE97, SE97B, SE98, SE98A
     Datasheets:
 	http://www.nxp.com/documents/data_sheet/SE97.pdf
 	http://www.nxp.com/documents/data_sheet/SE97B.pdf
-  * NXP Semiconductors SE98
-    Prefix: 'se98'
-    Addresses scanned: I2C 0x18 - 0x1f
-    Datasheets:
 	http://www.nxp.com/documents/data_sheet/SE98.pdf
+	http://www.nxp.com/documents/data_sheet/SE98A.pdf
   * ON Semiconductor CAT34TS02, CAT6095
-    Prefix: 'cat34ts02', 'cat6095'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheet:
 	http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
 	http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
-  * ST Microelectronics STTS424, STTS424E02
-    Prefix: 'stts424'
-    Addresses scanned: I2C 0x18 - 0x1f
+  * ST Microelectronics STTS424, STTS424E02, STTS2002, STTS3000
     Datasheets:
-	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
-	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00157556.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00157558.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
-    Prefix: 'jc42'
-    Addresses scanned: I2C 0x18 - 0x1f
     Datasheet:
 	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
+  Common for all chips:
+    Prefix: 'jc42'
+    Addresses scanned: I2C 0x18 - 0x1f
+
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
 
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index a10f73624ad3..90956b618025 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -11,7 +11,7 @@ Supported chips:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
 * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
-* AMD Family 15h processors: "Bulldozer"
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity"
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
diff --git a/Documentation/hwmon/lm80 b/Documentation/hwmon/lm80
index cb5b407ba3e6..a60b43efc32b 100644
--- a/Documentation/hwmon/lm80
+++ b/Documentation/hwmon/lm80
@@ -7,6 +7,11 @@ Supported chips:
     Addresses scanned: I2C 0x28 - 0x2f
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/
+  * National Semiconductor LM96080
+    Prefix: 'lm96080'
+    Addresses scanned: I2C 0x28 - 0x2f
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/
 
 Authors:
         Frodo Looijaard <frodol@dds.nl>,
@@ -17,7 +22,9 @@ Description
 
 This driver implements support for the National Semiconductor LM80.
 It is described as a 'Serial Interface ACPI-Compatible Microprocessor
-System Hardware Monitor'.
+System Hardware Monitor'. The LM96080 is a more recent incarnation,
+it is pin and register compatible, with a few additional features not
+yet supported by the driver.
 
 The LM80 implements one temperature sensor, two fan rotation speed sensors,
 seven voltage sensors, alarms, and some miscellaneous stuff.
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 9cd14cfe6515..b466974e142f 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -118,6 +118,10 @@ Supported chips:
     Addresses scanned: I2C 0x48 through 0x4F
     Datasheet: Publicly available at NXP website
                http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf
+  * GMT G781
+    Prefix: 'g781'
+    Addresses scanned: I2C 0x4c, 0x4d
+    Datasheet: Not publicly available from GMT
 
 Author: Jean Delvare <khali@linux-fr.org>
 
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 19743919ea56..04482226db20 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -11,6 +11,11 @@ Supported chips:
     Prefixes: 'max34441'
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
+  * Maxim MAX34446
+    PMBus Power-Supply Data Logger
+    Prefixes: 'max34446'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34446.pdf
 
 Author: Guenter Roeck <guenter.roeck@ericsson.com>
 
@@ -19,8 +24,8 @@ Description
 -----------
 
 This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
-Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager
-and Intelligent Fan Controller.
+Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
+and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -33,6 +38,13 @@ This driver does not auto-detect devices. You will have to instantiate the
 devices explicitly. Please see Documentation/i2c/instantiating-devices for
 details.
 
+For MAX34446, the value of the currX_crit attribute determines if current or
+voltage measurement is enabled for a given channel. Voltage measurement is
+enabled if currX_crit is set to 0; current measurement is enabled if the
+attribute is set to a positive value. Power measurement is only enabled if
+channel 1 (3) is configured for voltage measurement, and channel 2 (4) is
+configured for current measurement.
+
 
 Platform data support
 ---------------------
@@ -56,19 +68,31 @@ in[1-6]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
 in[1-6]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
 in[1-6]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
 in[1-6]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+in[1-6]_lowest		Historical minimum voltage.
 in[1-6]_highest		Historical maximum voltage.
 in[1-6]_reset_history	Write any value to reset history.
 
+			MAX34446 only supports in[1-4].
+
 curr[1-6]_label		"iout[1-6]".
 curr[1-6]_input		Measured current. From READ_IOUT register.
 curr[1-6]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
 curr[1-6]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
 curr[1-6]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
 curr[1-6]_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+curr[1-4]_average	Historical average current (MAX34446 only).
 curr[1-6]_highest	Historical maximum current.
 curr[1-6]_reset_history	Write any value to reset history.
 
 			in6 and curr6 attributes only exist for MAX34440.
+			MAX34446 only supports curr[1-4].
+
+power[1,3]_label	"pout[1,3]"
+power[1,3]_input	Measured power.
+power[1,3]_average	Historical average power.
+power[1,3]_highest	Historical maximum power.
+
+			Power attributes only exist for MAX34446.
 
 temp[1-8]_input		Measured temperatures. From READ_TEMPERATURE_1 register.
 			temp1 is the chip's internal temperature. temp2..temp5
@@ -79,7 +103,9 @@ temp[1-8]_max		Maximum temperature. From OT_WARN_LIMIT register.
 temp[1-8]_crit		Critical high temperature. From OT_FAULT_LIMIT register.
 temp[1-8]_max_alarm	Temperature high alarm.
 temp[1-8]_crit_alarm	Temperature critical high alarm.
+temp[1-8]_average	Historical average temperature (MAX34446 only).
 temp[1-8]_highest	Historical maximum temperature.
 temp[1-8]_reset_history	Write any value to reset history.
 
 			temp7 and temp8 attributes only exist for MAX34440.
+			MAX34446 only supports temp[1-3].
diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc
index 044531a86405..d0e7b3fa9e75 100644
--- a/Documentation/hwmon/mc13783-adc
+++ b/Documentation/hwmon/mc13783-adc
@@ -3,8 +3,11 @@ Kernel driver mc13783-adc
 
 Supported chips:
   * Freescale Atlas MC13783
-    Prefix: 'mc13783_adc'
+    Prefix: 'mc13783'
     Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
+  * Freescale Atlas MC13892
+    Prefix: 'mc13892'
+    Datasheet: http://cache.freescale.com/files/analog/doc/data_sheet/MC13892.pdf?fsrch=1&sr=1
 
 Authors:
     Sascha Hauer <s.hauer@pengutronix.de>
@@ -13,20 +16,21 @@ Authors:
 Description
 -----------
 
-The Freescale MC13783 is a Power Management and Audio Circuit. Among
-other things it contains a 10-bit A/D converter. The converter has 16
-channels which can be used in different modes.
-The A/D converter has a resolution of 2.25mV. Channels 0-4 have
-a dedicated meaning with chip internal scaling applied. Channels 5-7
-can be used as general purpose inputs or alternatively in a dedicated
-mode. Channels 12-15 are occupied by the touchscreen if it's active.
+The Freescale MC13783 and MC13892 are Power Management and Audio Circuits.
+Among other things they contain a 10-bit A/D converter. The converter has 16
+(MC13783) resp. 12 (MC13892) channels which can be used in different modes. The
+A/D converter has a resolution of 2.25mV.
 
-Currently the driver only supports channels 2 and 5-15 with no alternative
-modes for channels 5-7.
+Some channels can be used as General Purpose inputs or in a dedicated mode with
+a chip internal scaling applied .
 
-See this table for the meaning of the different channels and their chip
-internal scaling:
+Currently the driver only supports the Application Supply channel (BP / BPSNS),
+the General Purpose inputs and touchscreen.
 
+See the following tables for the meaning of the different channels and their
+chip internal scaling:
+
+MC13783:
 Channel	Signal						Input Range	Scaling
 -------------------------------------------------------------------------------
 0	Battery Voltage (BATT)				2.50 - 4.65V	-2.40V
@@ -34,7 +38,7 @@ Channel	Signal						Input Range	Scaling
 2	Application Supply (BP)				2.50 - 4.65V	-2.40V
 3	Charger Voltage (CHRGRAW)			0 - 10V /	/5
 							0 - 20V		/10
-4	Charger Current (CHRGISNSP-CHRGISNSN)		-0.25V - 0.25V	x4
+4	Charger Current (CHRGISNSP-CHRGISNSN)		-0.25 - 0.25V	x4
 5	General Purpose ADIN5 / Battery Pack Thermistor	0 - 2.30V	No
 6	General Purpose ADIN6 / Backup Voltage (LICELL)	0 - 2.30V /	No /
 							1.50 - 3.50V	-1.20V
@@ -48,3 +52,23 @@ Channel	Signal						Input Range	Scaling
 13	General Purpose TSX2 / Touchscreen X-plate 2	0 - 2.30V	No
 14	General Purpose TSY1 / Touchscreen Y-plate 1	0 - 2.30V	No
 15	General Purpose TSY2 / Touchscreen Y-plate 2	0 - 2.30V	No
+
+MC13892:
+Channel	Signal						Input Range	Scaling
+-------------------------------------------------------------------------------
+0	Battery Voltage (BATT)				0 - 4.8V	/2
+1	Battery Current (BATT - BATTISNSCC)		-60 - 60 mV	x20
+2	Application Supply (BPSNS)			0 - 4.8V	/2
+3	Charger Voltage (CHRGRAW)			0 - 12V /	/5
+							0 - 20V		/10
+4	Charger Current (CHRGISNS-BPSNS) /		-0.3 - 0.3V /	x4 /
+	Touchscreen X-plate 1				0 - 2.4V	No
+5	General Purpose ADIN5 /	Battery Pack Thermistor	0 - 2.4V	No
+6	General Purpose ADIN6 / Backup Voltage (LICELL)	0 - 2.4V /	No
+	Backup Voltage (LICELL)                        	0 - 3.6V	x2/3
+7	General Purpose ADIN7 / UID / Die Temperature	0 - 2.4V /	No /
+							0 - 4.8V	/2
+12	General Purpose TSX1 / Touchscreen X-plate 1	0 - 2.4V	No
+13	General Purpose TSX2 / Touchscreen X-plate 2	0 - 2.4V	No
+14	General Purpose TSY1 / Touchscreen Y-plate 1	0 - 2.4V	No
+15	General Purpose TSY2 / Touchscreen Y-plate 2	0 - 2.4V	No
diff --git a/Documentation/hwmon/mcp3021 b/Documentation/hwmon/mcp3021
new file mode 100644
index 000000000000..325fd87e81b2
--- /dev/null
+++ b/Documentation/hwmon/mcp3021
@@ -0,0 +1,22 @@
+Kernel driver MCP3021
+======================
+
+Supported chips:
+  * Microchip Technology MCP3021
+    Prefix: 'mcp3021'
+    Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21805a.pdf
+
+Author: Mingkai Hu
+
+Description
+-----------
+
+This driver implements support for the Microchip Technology MCP3021 chip.
+
+The Microchip Technology Inc. MCP3021 is a successive approximation A/D
+converter (ADC) with 10-bit resolution.
+This device provides one single-ended input with very low power consumption.
+Communication to the MCP3021 is performed using a 2-wire I2C compatible
+interface. Standard (100 kHz) and Fast (400 kHz) I2C modes are available.
+The default I2C device address is 0x4d (contact the Microchip factory for
+additional address options).
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index d28b591753d1..f90f99920cc5 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -15,13 +15,20 @@ Supported chips:
 	http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
 	http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
   * Lineage Power
-    Prefixes: 'pdt003', 'pdt006', 'pdt012', 'udt020'
+    Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020'
     Addresses scanned: -
     Datasheets:
 	http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf
 	http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf
 	http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
 	http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
+	http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
+  * Texas Instruments TPS40400, TPS40422
+    Prefixes: 'tps40400', 'tps40422'
+    Addresses scanned: -
+    Datasheets:
+	http://www.ti.com/lit/gpn/tps40400
+	http://www.ti.com/lit/gpn/tps40422
   * Generic PMBus devices
     Prefix: 'pmbus'
     Addresses scanned: -
diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627
index 446a054e4912..0551d266c51c 100644
--- a/Documentation/hwmon/sch5627
+++ b/Documentation/hwmon/sch5627
@@ -16,6 +16,11 @@ Description
 SMSC SCH5627 Super I/O chips include complete hardware monitoring
 capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures.
 
+The SMSC SCH5627 hardware monitoring part also contains an integrated
+watchdog. In order for this watchdog to function some motherboard specific
+initialization most be done by the BIOS, so if the watchdog is not enabled
+by the BIOS the sch5627 driver will not register a watchdog device.
+
 The hardware monitoring part of the SMSC SCH5627 is accessed by talking
 through an embedded microcontroller. An application note describing the
 protocol for communicating with the microcontroller is available upon
diff --git a/Documentation/hwmon/sch5636 b/Documentation/hwmon/sch5636
index f83bd1c260f0..7b0a01da0717 100644
--- a/Documentation/hwmon/sch5636
+++ b/Documentation/hwmon/sch5636
@@ -26,6 +26,9 @@ temperatures. Note that the driver detects how many fan headers /
 temperature sensors are actually implemented on the motherboard, so you will
 likely see fewer temperature and fan inputs.
 
+The Fujitsu Theseus hwmon solution also contains an integrated watchdog.
+This watchdog is fully supported by the sch5636 driver.
+
 An application note describing the Theseus' registers, as well as an
 application note describing the protocol for communicating with the
 microcontroller is available upon request. Please mail me if you want a copy.
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 3f44dbdfda70..ceaf6f652b00 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
 (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
 as Winbond chips.
 
-The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
 (except for 627UHG), alarms with beep warnings (control unimplemented),
 and some automatic fan regulation strategies (plus manual fan control mode).
@@ -143,8 +143,13 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature
 pwm[1-4]_stop_time  - how many milliseconds [ms] must elapse to switch
                       corresponding fan off. (when the temperature was below
                       defined range).
+pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up
+pwm[1-4]_step_output- rate of fan speed change (1 - 255)
+pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down
+pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature
+                      is above defined range.
 
-Note: last two functions are influenced by other control bits, not yet exported
+Note: last six functions are influenced by other control bits, not yet exported
       by the driver, so a change might not have any effect.
 
 Implementation Details
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 5865a2470d4a..a995b41724fd 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -34,6 +34,14 @@ Supported chips:
     Prefix: 'zl6105'
     Addresses scanned: -
     Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
+  * Intersil / Zilker Labs ZL9101M
+    Prefix: 'zl9101'
+    Addresses scanned: -
+    Datasheet: http://www.intersil.com/data/fn/fn7669.pdf
+  * Intersil / Zilker Labs ZL9117M
+    Prefix: 'zl9117'
+    Addresses scanned: -
+    Datasheet: http://www.intersil.com/data/fn/fn7914.pdf
   * Ericsson BMR450, BMR451
     Prefix: 'bmr450', 'bmr451'
     Addresses scanned: -
@@ -88,14 +96,12 @@ Module parameters
 delay
 -----
 
-Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
-I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
-1 ms appears to be sufficient and has not caused any problems in testing.
-The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
-affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
-except for ZL2004 and ZL6105. To enable manual override, the driver provides a
-writeable module parameter, 'delay', which can be used to set the interval to
-a value between 0 and 65,535 microseconds.
+Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
+bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
+appears to be sufficient and has not caused any problems in testing. The problem
+is known to affect all currently supported chips. For manual override, the
+driver provides a writeable module parameter, 'delay', which can be used to set
+the interval to a value between 0 and 65,535 microseconds.
 
 
 Sysfs entries